From: "Daniel P. Berrange" <berrange@redhat.com>
To: qemu-devel@nongnu.org
Cc: Peter Maydell <peter.maydell@linaro.org>,
"Daniel P. Berrange" <berrange@redhat.com>
Subject: [Qemu-devel] [PULL v1 2/3] crypto: use glib as fallback for hash algorithm
Date: Thu, 21 Jul 2016 11:09:56 +0100 [thread overview]
Message-ID: <1469095797-5098-3-git-send-email-berrange@redhat.com> (raw)
In-Reply-To: <1469095797-5098-1-git-send-email-berrange@redhat.com>
GLib >= 2.16 provides GChecksum API which is good enough
for md5, sha1, sha256 and sha512. Use this as a final
fallback if neither nettle or gcrypt are available. This
lets us remove the stub hash impl, and so callers can
be sure those 4 algs are always available at compile
time. They may still be disabled at runtime, so a check
for qcrypto_hash_supports() is still best practice to
report good error messages.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
---
crypto/Makefile.objs | 2 +-
crypto/hash-glib.c | 98 ++++++++++++++++++++++++++++++++++++++++++++++++++++
crypto/hash-stub.c | 41 ----------------------
3 files changed, 99 insertions(+), 42 deletions(-)
create mode 100644 crypto/hash-glib.c
delete mode 100644 crypto/hash-stub.c
diff --git a/crypto/Makefile.objs b/crypto/Makefile.objs
index febffba..a36d2d9 100644
--- a/crypto/Makefile.objs
+++ b/crypto/Makefile.objs
@@ -2,6 +2,7 @@ crypto-obj-y = init.o
crypto-obj-y += hash.o
crypto-obj-$(CONFIG_NETTLE) += hash-nettle.o
crypto-obj-$(if $(CONFIG_NETTLE),n,$(CONFIG_GCRYPT)) += hash-gcrypt.o
+crypto-obj-$(if $(CONFIG_NETTLE),n,$(if $(CONFIG_GCRYPT),n,y)) += hash-glib.o
crypto-obj-y += aes.o
crypto-obj-y += desrfb.o
crypto-obj-y += cipher.o
@@ -30,4 +31,3 @@ crypto-obj-y += block-luks.o
crypto-aes-obj-y = aes.o
stub-obj-y += pbkdf-stub.o
-stub-obj-y += hash-stub.o
diff --git a/crypto/hash-glib.c b/crypto/hash-glib.c
new file mode 100644
index 0000000..cb68a3b
--- /dev/null
+++ b/crypto/hash-glib.c
@@ -0,0 +1,98 @@
+/*
+ * QEMU Crypto hash algorithms
+ *
+ * Copyright (c) 2016 Red Hat, Inc.
+ *
+ * This library is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU Lesser General Public
+ * License as published by the Free Software Foundation; either
+ * version 2 of the License, or (at your option) any later version.
+ *
+ * This library is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * Lesser General Public License for more details.
+ *
+ * You should have received a copy of the GNU Lesser General Public
+ * License along with this library; if not, see <http://www.gnu.org/licenses/>.
+ *
+ */
+
+#include "qemu/osdep.h"
+#include "qapi/error.h"
+#include "crypto/hash.h"
+
+
+static int qcrypto_hash_alg_map[QCRYPTO_HASH_ALG__MAX] = {
+ [QCRYPTO_HASH_ALG_MD5] = G_CHECKSUM_MD5,
+ [QCRYPTO_HASH_ALG_SHA1] = G_CHECKSUM_SHA1,
+ [QCRYPTO_HASH_ALG_SHA224] = -1,
+ [QCRYPTO_HASH_ALG_SHA256] = G_CHECKSUM_SHA256,
+ [QCRYPTO_HASH_ALG_SHA384] = -1,
+#if GLIB_CHECK_VERSION(2, 36, 0)
+ [QCRYPTO_HASH_ALG_SHA512] = G_CHECKSUM_SHA512,
+#else
+ [QCRYPTO_HASH_ALG_SHA512] = -1,
+#endif
+ [QCRYPTO_HASH_ALG_RIPEMD160] = -1,
+};
+
+gboolean qcrypto_hash_supports(QCryptoHashAlgorithm alg)
+{
+ if (alg < G_N_ELEMENTS(qcrypto_hash_alg_map) &&
+ qcrypto_hash_alg_map[alg] != -1) {
+ return true;
+ }
+ return false;
+}
+
+
+int qcrypto_hash_bytesv(QCryptoHashAlgorithm alg,
+ const struct iovec *iov,
+ size_t niov,
+ uint8_t **result,
+ size_t *resultlen,
+ Error **errp)
+{
+ int i, ret;
+ GChecksum *cs;
+
+ if (alg >= G_N_ELEMENTS(qcrypto_hash_alg_map) ||
+ qcrypto_hash_alg_map[alg] == -1) {
+ error_setg(errp,
+ "Unknown hash algorithm %d",
+ alg);
+ return -1;
+ }
+
+ cs = g_checksum_new(qcrypto_hash_alg_map[alg]);
+
+ for (i = 0; i < niov; i++) {
+ g_checksum_update(cs, iov[i].iov_base, iov[i].iov_len);
+ }
+
+ ret = g_checksum_type_get_length(qcrypto_hash_alg_map[alg]);
+ if (ret < 0) {
+ error_setg(errp, "%s",
+ "Unable to get hash length");
+ goto error;
+ }
+ if (*resultlen == 0) {
+ *resultlen = ret;
+ *result = g_new0(uint8_t, *resultlen);
+ } else if (*resultlen != ret) {
+ error_setg(errp,
+ "Result buffer size %zu is smaller than hash %d",
+ *resultlen, ret);
+ goto error;
+ }
+
+ g_checksum_get_digest(cs, *result, resultlen);
+
+ g_checksum_free(cs);
+ return 0;
+
+ error:
+ g_checksum_free(cs);
+ return -1;
+}
diff --git a/crypto/hash-stub.c b/crypto/hash-stub.c
deleted file mode 100644
index 8a9b8d4..0000000
--- a/crypto/hash-stub.c
+++ /dev/null
@@ -1,41 +0,0 @@
-/*
- * QEMU Crypto hash algorithms
- *
- * Copyright (c) 2016 Red Hat, Inc.
- *
- * This library is free software; you can redistribute it and/or
- * modify it under the terms of the GNU Lesser General Public
- * License as published by the Free Software Foundation; either
- * version 2 of the License, or (at your option) any later version.
- *
- * This library is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
- * Lesser General Public License for more details.
- *
- * You should have received a copy of the GNU Lesser General Public
- * License along with this library; if not, see <http://www.gnu.org/licenses/>.
- *
- */
-
-#include "qemu/osdep.h"
-#include "qapi/error.h"
-#include "crypto/hash.h"
-
-gboolean qcrypto_hash_supports(QCryptoHashAlgorithm alg G_GNUC_UNUSED)
-{
- return false;
-}
-
-int qcrypto_hash_bytesv(QCryptoHashAlgorithm alg,
- const struct iovec *iov G_GNUC_UNUSED,
- size_t niov G_GNUC_UNUSED,
- uint8_t **result G_GNUC_UNUSED,
- size_t *resultlen G_GNUC_UNUSED,
- Error **errp)
-{
- error_setg(errp,
- "Hash algorithm %d not supported without GNUTLS",
- alg);
- return -1;
-}
--
2.7.4
next prev parent reply other threads:[~2016-07-21 10:10 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-07-21 10:09 [Qemu-devel] [PULL v1 0/3] Merge qcrypto-next 2016/07/21 Daniel P. Berrange
2016-07-21 10:09 ` [Qemu-devel] [PULL v1 1/3] crypto: use /dev/[u]random as a final fallback random source Daniel P. Berrange
2016-07-21 10:09 ` Daniel P. Berrange [this message]
2016-07-21 10:09 ` [Qemu-devel] [PULL v1 3/3] crypto: don't open-code qcrypto_hash_supports Daniel P. Berrange
2016-07-21 11:42 ` [Qemu-devel] [PULL v1 0/3] Merge qcrypto-next 2016/07/21 Peter Maydell
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1469095797-5098-3-git-send-email-berrange@redhat.com \
--to=berrange@redhat.com \
--cc=peter.maydell@linaro.org \
--cc=qemu-devel@nongnu.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).