From: "Cédric Le Goater" <clg@kaod.org>
To: Peter Maydell <peter.maydell@linaro.org>
Cc: qemu-devel@nongnu.org, qemu-arm@nongnu.org,
"Andrew Jeffery" <andrew@aj.id.au>,
"Cédric Le Goater" <clg@kaod.org>
Subject: [Qemu-devel] [PATCH 5/6] aspeed: add ast2500 support to scu and sdmc controllers
Date: Wed, 27 Jul 2016 18:46:57 +0200 [thread overview]
Message-ID: <1469638018-17590-6-git-send-email-clg@kaod.org> (raw)
In-Reply-To: <1469638018-17590-1-git-send-email-clg@kaod.org>
Based on previous work done by Andrew Jeffery <andrew@aj.id.au>.
Signed-off-by: Cédric Le Goater <clg@kaod.org>
---
hw/misc/aspeed_scu.c | 45 +++++++++++++++++++++++++++++++++++++++++++-
hw/misc/aspeed_sdmc.c | 1 +
include/hw/misc/aspeed_scu.h | 1 +
3 files changed, 46 insertions(+), 1 deletion(-)
diff --git a/hw/misc/aspeed_scu.c b/hw/misc/aspeed_scu.c
index c7e2c8263f55..6dd7e1085420 100644
--- a/hw/misc/aspeed_scu.c
+++ b/hw/misc/aspeed_scu.c
@@ -120,6 +120,41 @@ static const uint32_t ast2400_a0_resets[ASPEED_SCU_NR_REGS] = {
[BMC_DEV_ID] = 0x00002402U
};
+/* SCU70 bit 23: 0 24Mhz. bit 11:9: 0b001 AXI:ABH ratio 2:1 */
+/* AST2500 revision A1 */
+
+static const uint32_t ast2500_a1_resets[ASPEED_SCU_NR_REGS] = {
+ [SYS_RST_CTRL] = 0xFFCFFEDCU,
+ [CLK_SEL] = 0xF3F40000U,
+ [CLK_STOP_CTRL] = 0x19FC3E8BU,
+ [D2PLL_PARAM] = 0x00026108U,
+ [MPLL_PARAM] = 0x00030291U,
+ [HPLL_PARAM] = 0x93000400U,
+ [MISC_CTRL1] = 0x00000010U,
+ [PCI_CTRL1] = 0x20001A03U,
+ [PCI_CTRL2] = 0x20001A03U,
+ [PCI_CTRL3] = 0x04000030U,
+ [SYS_RST_STATUS] = 0x00000001U,
+ [SOC_SCRATCH1] = 0x000000C0U, /* SoC completed DRAM init */
+ [MISC_CTRL2] = 0x00000023U,
+ [RNG_CTRL] = 0x0000000EU,
+ [PINMUX_CTRL2] = 0x0000F000U,
+ [PINMUX_CTRL3] = 0x03000000U,
+ [PINMUX_CTRL4] = 0x00000000U,
+ [PINMUX_CTRL5] = 0x0000A000U,
+ [WDT_RST_CTRL] = 0x023FFFF3U,
+ [PINMUX_CTRL8] = 0xFFFF0000U,
+ [PINMUX_CTRL9] = 0x000FFFFFU,
+ [FREE_CNTR4] = 0x000000FFU,
+ [FREE_CNTR4_EXT] = 0x000000FFU,
+ [CPU2_BASE_SEG1] = 0x80000000U,
+ [CPU2_BASE_SEG4] = 0x1E600000U,
+ [CPU2_BASE_SEG5] = 0xC0000000U,
+ [UART_HPLL_CLK] = 0x00001903U,
+ [PCIE_CTRL] = 0x0000007BU,
+ [BMC_DEV_ID] = 0x00002402U
+};
+
static uint64_t aspeed_scu_read(void *opaque, hwaddr offset, unsigned size)
{
AspeedSCUState *s = ASPEED_SCU(opaque);
@@ -198,6 +233,10 @@ static void aspeed_scu_reset(DeviceState *dev)
case AST2400_A0_SILICON_REV:
reset = ast2400_a0_resets;
break;
+ case AST2500_A0_SILICON_REV:
+ case AST2500_A1_SILICON_REV:
+ reset = ast2500_a1_resets;
+ break;
default:
g_assert_not_reached();
}
@@ -208,7 +247,11 @@ static void aspeed_scu_reset(DeviceState *dev)
s->regs[HW_STRAP2] = s->hw_strap2;
}
-static uint32_t aspeed_silicon_revs[] = { AST2400_A0_SILICON_REV, };
+static uint32_t aspeed_silicon_revs[] = {
+ AST2400_A0_SILICON_REV,
+ AST2500_A0_SILICON_REV,
+ AST2500_A1_SILICON_REV
+};
bool is_supported_silicon_rev(uint32_t silicon_rev)
{
diff --git a/hw/misc/aspeed_sdmc.c b/hw/misc/aspeed_sdmc.c
index 6cc0301a6331..621d166890fa 100644
--- a/hw/misc/aspeed_sdmc.c
+++ b/hw/misc/aspeed_sdmc.c
@@ -196,6 +196,7 @@ static void aspeed_sdmc_reset(DeviceState *dev)
break;
case AST2500_A0_SILICON_REV:
+ case AST2500_A1_SILICON_REV:
s->regs[R_CONF] |=
ASPEED_SDMC_HW_VERSION(1) |
ASPEED_SDMC_VGA_APERTURE(ASPEED_SDMC_VGA_64MB) |
diff --git a/include/hw/misc/aspeed_scu.h b/include/hw/misc/aspeed_scu.h
index fdfd982288f2..e2e4d1864e34 100644
--- a/include/hw/misc/aspeed_scu.h
+++ b/include/hw/misc/aspeed_scu.h
@@ -33,6 +33,7 @@ typedef struct AspeedSCUState {
#define AST2400_A0_SILICON_REV 0x02000303U
#define AST2500_A0_SILICON_REV 0x04000303U
+#define AST2500_A1_SILICON_REV 0x04010303U
extern bool is_supported_silicon_rev(uint32_t silicon_rev);
--
2.1.4
next prev parent reply other threads:[~2016-07-27 16:47 UTC|newest]
Thread overview: 24+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-07-27 16:46 [Qemu-devel] [PATCH 0/6] arm: add ast2500 support Cédric Le Goater
2016-07-27 16:46 ` [Qemu-devel] [PATCH 1/6] palmetto-bmc: add a "silicon-rev" property at the soc level Cédric Le Goater
2016-07-28 2:14 ` Andrew Jeffery
2016-07-28 7:51 ` Cédric Le Goater
2016-07-29 1:16 ` Andrew Jeffery
2016-07-30 8:35 ` Cédric Le Goater
2016-08-01 0:30 ` Andrew Jeffery
2016-07-27 16:46 ` [Qemu-devel] [PATCH 2/6] palmetto-bmc: replace palmetto_bmc with aspeed Cédric Le Goater
2016-07-28 4:48 ` Andrew Jeffery
2016-07-28 7:04 ` Cédric Le Goater
2016-07-27 16:46 ` [Qemu-devel] [PATCH 3/6] ast2400: use machine cpu_model to initialize the soc cpu Cédric Le Goater
2016-07-28 2:37 ` Andrew Jeffery
2016-07-28 6:59 ` Cédric Le Goater
2016-07-27 16:46 ` [Qemu-devel] [PATCH 4/6] palmetto-bmc: add board specific configuration Cédric Le Goater
2016-07-28 2:45 ` Andrew Jeffery
2016-07-28 7:01 ` Cédric Le Goater
2016-07-27 16:46 ` Cédric Le Goater [this message]
2016-07-28 2:56 ` [Qemu-devel] [PATCH 5/6] aspeed: add ast2500 support to scu and sdmc controllers Andrew Jeffery
2016-07-27 16:46 ` [Qemu-devel] [PATCH 6/6] arm: add support for an ast2500 evaluation board Cédric Le Goater
2016-07-28 5:11 ` Andrew Jeffery
2016-07-28 7:15 ` Cédric Le Goater
2016-07-28 7:58 ` Andrew Jeffery
2016-07-28 8:03 ` Cédric Le Goater
2016-07-28 14:26 ` Cédric Le Goater
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1469638018-17590-6-git-send-email-clg@kaod.org \
--to=clg@kaod.org \
--cc=andrew@aj.id.au \
--cc=peter.maydell@linaro.org \
--cc=qemu-arm@nongnu.org \
--cc=qemu-devel@nongnu.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).