From: "Michael S. Tsirkin" <mst@redhat.com>
To: qemu-devel@nongnu.org
Cc: "Peter Maydell" <peter.maydell@linaro.org>,
"Marc-André Lureau" <marcandre.lureau@redhat.com>
Subject: [Qemu-devel] [PULL 21/41] vhost: do not assert() on vhost_ops failure
Date: Fri, 29 Jul 2016 06:16:19 +0300 [thread overview]
Message-ID: <1469762011-7902-22-git-send-email-mst@redhat.com> (raw)
In-Reply-To: <1469762011-7902-1-git-send-email-mst@redhat.com>
From: Marc-André Lureau <marcandre.lureau@redhat.com>
Calling a vhost operation may fail, for example with disconnected
vhost-user backend, but qemu shouldn't abort in this case.
Log an error instead, except on error and cleanup code paths where it
can be mostly ignored.
Let's use a VHOST_OPS_DEBUG macro to easily disable those messages once
disconnected backend stabilizes.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
---
hw/virtio/vhost.c | 49 ++++++++++++++++++++++++++++++++-----------------
1 file changed, 32 insertions(+), 17 deletions(-)
diff --git a/hw/virtio/vhost.c b/hw/virtio/vhost.c
index e3091d1..1ece1ef 100644
--- a/hw/virtio/vhost.c
+++ b/hw/virtio/vhost.c
@@ -27,6 +27,18 @@
#include "hw/virtio/virtio-access.h"
#include "migration/migration.h"
+/* enabled until disconnected backend stabilizes */
+#define _VHOST_DEBUG 1
+
+#ifdef _VHOST_DEBUG
+#define VHOST_OPS_DEBUG(fmt, ...) \
+ do { error_report(fmt ": %s (%d)", ## __VA_ARGS__, \
+ strerror(errno), errno); } while (0)
+#else
+#define VHOST_OPS_DEBUG(fmt, ...) \
+ do { } while (0)
+#endif
+
static struct vhost_log *vhost_log;
static struct vhost_log *vhost_log_shm;
@@ -400,7 +412,10 @@ static inline void vhost_dev_log_resize(struct vhost_dev *dev, uint64_t size)
/* inform backend of log switching, this must be done before
releasing the current log, to ensure no logging is lost */
r = dev->vhost_ops->vhost_set_log_base(dev, log_base, log);
- assert(r >= 0);
+ if (r < 0) {
+ VHOST_OPS_DEBUG("vhost_set_log_base failed");
+ }
+
vhost_log_put(dev, true);
dev->log = log;
dev->log_size = size;
@@ -567,7 +582,9 @@ static void vhost_commit(MemoryListener *listener)
if (!dev->log_enabled) {
r = dev->vhost_ops->vhost_set_mem_table(dev, dev->mem);
- assert(r >= 0);
+ if (r < 0) {
+ VHOST_OPS_DEBUG("vhost_set_mem_table failed");
+ }
dev->memory_changed = false;
return;
}
@@ -580,7 +597,9 @@ static void vhost_commit(MemoryListener *listener)
vhost_dev_log_resize(dev, log_size + VHOST_LOG_BUFFER);
}
r = dev->vhost_ops->vhost_set_mem_table(dev, dev->mem);
- assert(r >= 0);
+ if (r < 0) {
+ VHOST_OPS_DEBUG("vhost_set_mem_table failed");
+ }
/* To log less, can only decrease log size after table update. */
if (dev->log_size > log_size + VHOST_LOG_BUFFER) {
vhost_dev_log_resize(dev, log_size);
@@ -667,7 +686,7 @@ static int vhost_dev_set_features(struct vhost_dev *dev, bool enable_log)
static int vhost_dev_set_log(struct vhost_dev *dev, bool enable_log)
{
- int r, t, i, idx;
+ int r, i, idx;
r = vhost_dev_set_features(dev, enable_log);
if (r < 0) {
goto err_features;
@@ -684,12 +703,10 @@ static int vhost_dev_set_log(struct vhost_dev *dev, bool enable_log)
err_vq:
for (; i >= 0; --i) {
idx = dev->vhost_ops->vhost_get_vq_index(dev, dev->vq_index + i);
- t = vhost_virtqueue_set_addr(dev, dev->vqs + i, idx,
- dev->log_enabled);
- assert(t >= 0);
+ vhost_virtqueue_set_addr(dev, dev->vqs + i, idx,
+ dev->log_enabled);
}
- t = vhost_dev_set_features(dev, dev->log_enabled);
- assert(t >= 0);
+ vhost_dev_set_features(dev, dev->log_enabled);
err_features:
return r;
}
@@ -929,15 +946,11 @@ static void vhost_virtqueue_stop(struct vhost_dev *dev,
* native as legacy devices expect so by default.
*/
if (vhost_needs_vring_endian(vdev)) {
- r = vhost_virtqueue_set_vring_endian_legacy(dev,
- !virtio_is_big_endian(vdev),
- vhost_vq_index);
- if (r < 0) {
- error_report("failed to reset vring endianness");
- }
+ vhost_virtqueue_set_vring_endian_legacy(dev,
+ !virtio_is_big_endian(vdev),
+ vhost_vq_index);
}
- assert (r >= 0);
cpu_physical_memory_unmap(vq->ring, virtio_queue_get_ring_size(vdev, idx),
0, virtio_queue_get_ring_size(vdev, idx));
cpu_physical_memory_unmap(vq->used, virtio_queue_get_used_size(vdev, idx),
@@ -1228,7 +1241,9 @@ void vhost_virtqueue_mask(struct vhost_dev *hdev, VirtIODevice *vdev, int n,
file.index = hdev->vhost_ops->vhost_get_vq_index(hdev, n);
r = hdev->vhost_ops->vhost_set_vring_call(hdev, &file);
- assert(r >= 0);
+ if (r < 0) {
+ VHOST_OPS_DEBUG("vhost_set_vring_call failed");
+ }
}
uint64_t vhost_get_features(struct vhost_dev *hdev, const int *feature_bits,
--
MST
next prev parent reply other threads:[~2016-07-29 3:16 UTC|newest]
Thread overview: 43+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-07-29 3:14 [Qemu-devel] [PULL 00/41] pc, pci, virtio: cleanups, fixes Michael S. Tsirkin
2016-07-29 3:14 ` [Qemu-devel] [PULL 01/41] pcie: fix link active status bit migration Michael S. Tsirkin
2016-07-29 3:15 ` [Qemu-devel] [PULL 02/41] hw/pcie-root-port: Fix PCIe root port initialization Michael S. Tsirkin
2016-07-29 3:15 ` [Qemu-devel] [PULL 03/41] hw/pxb: declare pxb devices as not hot-pluggable Michael S. Tsirkin
2016-07-29 3:15 ` [Qemu-devel] [PULL 04/41] hw/acpi: fix a DSDT table issue when a pxb is present Michael S. Tsirkin
2016-07-29 3:15 ` [Qemu-devel] [PULL 05/41] acpi: refactor pxb crs computation Michael S. Tsirkin
2016-07-29 3:15 ` [Qemu-devel] [PULL 06/41] hw/apci: handle 64-bit MMIO regions correctly Michael S. Tsirkin
2016-07-29 3:15 ` [Qemu-devel] [PULL 07/41] hw/pci-bridge: Convert pxb initialization functions to Error Michael S. Tsirkin
2016-07-29 3:15 ` [Qemu-devel] [PULL 08/41] apb: convert init to realize Michael S. Tsirkin
2016-07-29 3:15 ` [Qemu-devel] [PULL 09/41] hw/virtio-pci: fix virtio behaviour Michael S. Tsirkin
2016-07-29 3:15 ` [Qemu-devel] [PULL 10/41] virtio: check vring descriptor buffer length Michael S. Tsirkin
2016-07-29 3:15 ` [Qemu-devel] [PULL 11/41] misc: indentation Michael S. Tsirkin
2016-07-29 3:15 ` [Qemu-devel] [PULL 12/41] vhost-user: minor simplification Michael S. Tsirkin
2016-07-29 3:15 ` [Qemu-devel] [PULL 13/41] vhost-user: disconnect on HUP Michael S. Tsirkin
2016-07-29 3:15 ` [Qemu-devel] [PULL 14/41] vhost: don't assume opaque is a fd, use backend cleanup Michael S. Tsirkin
2016-07-29 3:15 ` [Qemu-devel] [PULL 15/41] vhost: make vhost_log_put() idempotent Michael S. Tsirkin
2016-07-29 3:16 ` [Qemu-devel] [PULL 16/41] vhost: assert the log was cleaned up Michael S. Tsirkin
2016-07-29 3:16 ` [Qemu-devel] [PULL 17/41] vhost: fix cleanup on not fully initialized device Michael S. Tsirkin
2016-07-29 3:16 ` [Qemu-devel] [PULL 18/41] vhost: make vhost_dev_cleanup() idempotent Michael S. Tsirkin
2016-07-29 3:16 ` [Qemu-devel] [PULL 19/41] vhost-net: always call vhost_dev_cleanup() on failure Michael S. Tsirkin
2016-07-29 3:16 ` [Qemu-devel] [PULL 20/41] vhost: fix calling vhost_dev_cleanup() after vhost_dev_init() Michael S. Tsirkin
2016-07-29 3:16 ` Michael S. Tsirkin [this message]
2016-07-29 3:16 ` [Qemu-devel] [PULL 22/41] vhost: add missing VHOST_OPS_DEBUG Michael S. Tsirkin
2016-07-29 3:16 ` [Qemu-devel] [PULL 23/41] vhost: use error_report() instead of fprintf(stderr, ...) Michael S. Tsirkin
2016-07-29 3:16 ` [Qemu-devel] [PULL 24/41] qemu-char: fix qemu_chr_fe_set_msgfds() crash when disconnected Michael S. Tsirkin
2016-07-29 3:16 ` [Qemu-devel] [PULL 25/41] vhost-user: call set_msgfds unconditionally Michael S. Tsirkin
2016-07-29 3:16 ` [Qemu-devel] [PULL 26/41] vhost-user: check qemu_chr_fe_set_msgfds() return value Michael S. Tsirkin
2016-07-29 3:16 ` [Qemu-devel] [PULL 27/41] vhost-user: check vhost_user_{read, write}() " Michael S. Tsirkin
2016-07-29 3:16 ` [Qemu-devel] [PULL 28/41] vhost-user: keep vhost_net after a disconnection Michael S. Tsirkin
2016-07-29 3:16 ` [Qemu-devel] [PULL 29/41] vhost-user: add get_vhost_net() assertions Michael S. Tsirkin
2016-07-29 3:16 ` [Qemu-devel] [PULL 30/41] Revert "vhost-net: do not crash if backend is not present" Michael S. Tsirkin
2016-07-29 3:16 ` [Qemu-devel] [PULL 31/41] vhost-net: vhost_migration_done is vhost-user specific Michael S. Tsirkin
2016-07-29 3:16 ` [Qemu-devel] [PULL 32/41] vhost: add assert() to check runtime behaviour Michael S. Tsirkin
2016-07-29 3:17 ` [Qemu-devel] [PULL 33/41] char: add chr_wait_connected callback Michael S. Tsirkin
2016-07-29 3:17 ` [Qemu-devel] [PULL 34/41] char: add and use tcp_chr_wait_connected Michael S. Tsirkin
2016-07-29 3:17 ` [Qemu-devel] [PULL 35/41] vhost-user: wait until backend init is completed Michael S. Tsirkin
2016-07-29 3:17 ` [Qemu-devel] [PULL 36/41] tests: plug some leaks in virtio-net-test Michael S. Tsirkin
2016-07-29 3:17 ` [Qemu-devel] [PULL 37/41] tests: fix vhost-user-test leak Michael S. Tsirkin
2016-07-29 3:17 ` [Qemu-devel] [PULL 38/41] vhost-user: add error report in vhost_user_write() Michael S. Tsirkin
2016-07-29 3:17 ` [Qemu-devel] [PULL 39/41] vhost: add vhost_net_set_backend() Michael S. Tsirkin
2016-07-29 3:17 ` [Qemu-devel] [PULL 40/41] vhost: do not update last avail idx on get_vring_base() failure Michael S. Tsirkin
2016-07-29 3:17 ` [Qemu-devel] [PULL 41/41] mptsas: Fix a migration compatible issue Michael S. Tsirkin
2016-07-29 11:36 ` [Qemu-devel] [PULL 00/41] pc, pci, virtio: cleanups, fixes Peter Maydell
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1469762011-7902-22-git-send-email-mst@redhat.com \
--to=mst@redhat.com \
--cc=marcandre.lureau@redhat.com \
--cc=peter.maydell@linaro.org \
--cc=qemu-devel@nongnu.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).