From: "Michael S. Tsirkin" <mst@redhat.com>
To: qemu-devel@nongnu.org
Cc: Peter Maydell <peter.maydell@linaro.org>,
Marcel Apfelbaum <marcel@redhat.com>,
Laszlo Ersek <lersek@redhat.com>,
Igor Mammedov <imammedo@redhat.com>,
Paolo Bonzini <pbonzini@redhat.com>,
Richard Henderson <rth@twiddle.net>,
Eduardo Habkost <ehabkost@redhat.com>
Subject: [Qemu-devel] [PULL 06/41] hw/apci: handle 64-bit MMIO regions correctly
Date: Fri, 29 Jul 2016 06:15:19 +0300 [thread overview]
Message-ID: <1469762011-7902-7-git-send-email-mst@redhat.com> (raw)
In-Reply-To: <1469762011-7902-1-git-send-email-mst@redhat.com>
From: Marcel Apfelbaum <marcel@redhat.com>
In build_crs(), the calculation and merging of the ranges already happens
in 64-bit, but the entry boundaries are silently truncated to 32-bit in the
call to aml_dword_memory(). Fix it by handling the 64-bit MMIO ranges separately.
This fixes 64-bit BARs behind PXBs.
Reported-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Tested-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Marcel Apfelbaum <marcel@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
---
hw/i386/acpi-build.c | 54 +++++++++++++++++++++++++++++++++++++++++++---------
1 file changed, 45 insertions(+), 9 deletions(-)
diff --git a/hw/i386/acpi-build.c b/hw/i386/acpi-build.c
index aa540ab..a26a4bb 100644
--- a/hw/i386/acpi-build.c
+++ b/hw/i386/acpi-build.c
@@ -754,18 +754,22 @@ static void crs_range_free(gpointer data)
typedef struct CrsRangeSet {
GPtrArray *io_ranges;
GPtrArray *mem_ranges;
+ GPtrArray *mem_64bit_ranges;
} CrsRangeSet;
static void crs_range_set_init(CrsRangeSet *range_set)
{
range_set->io_ranges = g_ptr_array_new_with_free_func(crs_range_free);
range_set->mem_ranges = g_ptr_array_new_with_free_func(crs_range_free);
+ range_set->mem_64bit_ranges =
+ g_ptr_array_new_with_free_func(crs_range_free);
}
static void crs_range_set_free(CrsRangeSet *range_set)
{
g_ptr_array_free(range_set->io_ranges, true);
g_ptr_array_free(range_set->mem_ranges, true);
+ g_ptr_array_free(range_set->mem_64bit_ranges, true);
}
static gint crs_range_compare(gconstpointer a, gconstpointer b)
@@ -923,8 +927,14 @@ static Aml *build_crs(PCIHostState *host, CrsRangeSet *range_set)
* that do not support multiple root buses
*/
if (range_base && range_base <= range_limit) {
- crs_range_insert(temp_range_set.mem_ranges,
- range_base, range_limit);
+ uint64_t length = range_limit - range_base + 1;
+ if (range_limit <= UINT32_MAX && length <= UINT32_MAX) {
+ crs_range_insert(temp_range_set.mem_ranges,
+ range_base, range_limit);
+ } else {
+ crs_range_insert(temp_range_set.mem_64bit_ranges,
+ range_base, range_limit);
+ }
}
range_base =
@@ -937,8 +947,14 @@ static Aml *build_crs(PCIHostState *host, CrsRangeSet *range_set)
* that do not support multiple root buses
*/
if (range_base && range_base <= range_limit) {
- crs_range_insert(temp_range_set.mem_ranges,
- range_base, range_limit);
+ uint64_t length = range_limit - range_base + 1;
+ if (range_limit <= UINT32_MAX && length <= UINT32_MAX) {
+ crs_range_insert(temp_range_set.mem_ranges,
+ range_base, range_limit);
+ } else {
+ crs_range_insert(temp_range_set.mem_64bit_ranges,
+ range_base, range_limit);
+ }
}
}
}
@@ -966,6 +982,19 @@ static Aml *build_crs(PCIHostState *host, CrsRangeSet *range_set)
crs_range_insert(range_set->mem_ranges, entry->base, entry->limit);
}
+ crs_range_merge(temp_range_set.mem_64bit_ranges);
+ for (i = 0; i < temp_range_set.mem_64bit_ranges->len; i++) {
+ entry = g_ptr_array_index(temp_range_set.mem_64bit_ranges, i);
+ aml_append(crs,
+ aml_qword_memory(AML_POS_DECODE, AML_MIN_FIXED,
+ AML_MAX_FIXED, AML_NON_CACHEABLE,
+ AML_READ_WRITE,
+ 0, entry->base, entry->limit, 0,
+ entry->limit - entry->base + 1));
+ crs_range_insert(range_set->mem_64bit_ranges,
+ entry->base, entry->limit);
+ }
+
crs_range_set_free(&temp_range_set);
aml_append(crs,
@@ -2088,11 +2117,18 @@ build_dsdt(GArray *table_data, BIOSLinker *linker,
}
if (!range_is_empty(pci_hole64)) {
- aml_append(crs,
- aml_qword_memory(AML_POS_DECODE, AML_MIN_FIXED, AML_MAX_FIXED,
- AML_CACHEABLE, AML_READ_WRITE,
- 0, range_lob(pci_hole64), range_upb(pci_hole64), 0,
- range_upb(pci_hole64) + 1 - range_lob(pci_hole64)));
+ crs_replace_with_free_ranges(crs_range_set.mem_64bit_ranges,
+ range_lob(pci_hole64),
+ range_upb(pci_hole64));
+ for (i = 0; i < crs_range_set.mem_64bit_ranges->len; i++) {
+ entry = g_ptr_array_index(crs_range_set.mem_64bit_ranges, i);
+ aml_append(crs,
+ aml_qword_memory(AML_POS_DECODE, AML_MIN_FIXED,
+ AML_MAX_FIXED,
+ AML_CACHEABLE, AML_READ_WRITE,
+ 0, entry->base, entry->limit,
+ 0, entry->limit - entry->base + 1));
+ }
}
if (misc->tpm_version != TPM_VERSION_UNSPEC) {
--
MST
next prev parent reply other threads:[~2016-07-29 3:15 UTC|newest]
Thread overview: 43+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-07-29 3:14 [Qemu-devel] [PULL 00/41] pc, pci, virtio: cleanups, fixes Michael S. Tsirkin
2016-07-29 3:14 ` [Qemu-devel] [PULL 01/41] pcie: fix link active status bit migration Michael S. Tsirkin
2016-07-29 3:15 ` [Qemu-devel] [PULL 02/41] hw/pcie-root-port: Fix PCIe root port initialization Michael S. Tsirkin
2016-07-29 3:15 ` [Qemu-devel] [PULL 03/41] hw/pxb: declare pxb devices as not hot-pluggable Michael S. Tsirkin
2016-07-29 3:15 ` [Qemu-devel] [PULL 04/41] hw/acpi: fix a DSDT table issue when a pxb is present Michael S. Tsirkin
2016-07-29 3:15 ` [Qemu-devel] [PULL 05/41] acpi: refactor pxb crs computation Michael S. Tsirkin
2016-07-29 3:15 ` Michael S. Tsirkin [this message]
2016-07-29 3:15 ` [Qemu-devel] [PULL 07/41] hw/pci-bridge: Convert pxb initialization functions to Error Michael S. Tsirkin
2016-07-29 3:15 ` [Qemu-devel] [PULL 08/41] apb: convert init to realize Michael S. Tsirkin
2016-07-29 3:15 ` [Qemu-devel] [PULL 09/41] hw/virtio-pci: fix virtio behaviour Michael S. Tsirkin
2016-07-29 3:15 ` [Qemu-devel] [PULL 10/41] virtio: check vring descriptor buffer length Michael S. Tsirkin
2016-07-29 3:15 ` [Qemu-devel] [PULL 11/41] misc: indentation Michael S. Tsirkin
2016-07-29 3:15 ` [Qemu-devel] [PULL 12/41] vhost-user: minor simplification Michael S. Tsirkin
2016-07-29 3:15 ` [Qemu-devel] [PULL 13/41] vhost-user: disconnect on HUP Michael S. Tsirkin
2016-07-29 3:15 ` [Qemu-devel] [PULL 14/41] vhost: don't assume opaque is a fd, use backend cleanup Michael S. Tsirkin
2016-07-29 3:15 ` [Qemu-devel] [PULL 15/41] vhost: make vhost_log_put() idempotent Michael S. Tsirkin
2016-07-29 3:16 ` [Qemu-devel] [PULL 16/41] vhost: assert the log was cleaned up Michael S. Tsirkin
2016-07-29 3:16 ` [Qemu-devel] [PULL 17/41] vhost: fix cleanup on not fully initialized device Michael S. Tsirkin
2016-07-29 3:16 ` [Qemu-devel] [PULL 18/41] vhost: make vhost_dev_cleanup() idempotent Michael S. Tsirkin
2016-07-29 3:16 ` [Qemu-devel] [PULL 19/41] vhost-net: always call vhost_dev_cleanup() on failure Michael S. Tsirkin
2016-07-29 3:16 ` [Qemu-devel] [PULL 20/41] vhost: fix calling vhost_dev_cleanup() after vhost_dev_init() Michael S. Tsirkin
2016-07-29 3:16 ` [Qemu-devel] [PULL 21/41] vhost: do not assert() on vhost_ops failure Michael S. Tsirkin
2016-07-29 3:16 ` [Qemu-devel] [PULL 22/41] vhost: add missing VHOST_OPS_DEBUG Michael S. Tsirkin
2016-07-29 3:16 ` [Qemu-devel] [PULL 23/41] vhost: use error_report() instead of fprintf(stderr, ...) Michael S. Tsirkin
2016-07-29 3:16 ` [Qemu-devel] [PULL 24/41] qemu-char: fix qemu_chr_fe_set_msgfds() crash when disconnected Michael S. Tsirkin
2016-07-29 3:16 ` [Qemu-devel] [PULL 25/41] vhost-user: call set_msgfds unconditionally Michael S. Tsirkin
2016-07-29 3:16 ` [Qemu-devel] [PULL 26/41] vhost-user: check qemu_chr_fe_set_msgfds() return value Michael S. Tsirkin
2016-07-29 3:16 ` [Qemu-devel] [PULL 27/41] vhost-user: check vhost_user_{read, write}() " Michael S. Tsirkin
2016-07-29 3:16 ` [Qemu-devel] [PULL 28/41] vhost-user: keep vhost_net after a disconnection Michael S. Tsirkin
2016-07-29 3:16 ` [Qemu-devel] [PULL 29/41] vhost-user: add get_vhost_net() assertions Michael S. Tsirkin
2016-07-29 3:16 ` [Qemu-devel] [PULL 30/41] Revert "vhost-net: do not crash if backend is not present" Michael S. Tsirkin
2016-07-29 3:16 ` [Qemu-devel] [PULL 31/41] vhost-net: vhost_migration_done is vhost-user specific Michael S. Tsirkin
2016-07-29 3:16 ` [Qemu-devel] [PULL 32/41] vhost: add assert() to check runtime behaviour Michael S. Tsirkin
2016-07-29 3:17 ` [Qemu-devel] [PULL 33/41] char: add chr_wait_connected callback Michael S. Tsirkin
2016-07-29 3:17 ` [Qemu-devel] [PULL 34/41] char: add and use tcp_chr_wait_connected Michael S. Tsirkin
2016-07-29 3:17 ` [Qemu-devel] [PULL 35/41] vhost-user: wait until backend init is completed Michael S. Tsirkin
2016-07-29 3:17 ` [Qemu-devel] [PULL 36/41] tests: plug some leaks in virtio-net-test Michael S. Tsirkin
2016-07-29 3:17 ` [Qemu-devel] [PULL 37/41] tests: fix vhost-user-test leak Michael S. Tsirkin
2016-07-29 3:17 ` [Qemu-devel] [PULL 38/41] vhost-user: add error report in vhost_user_write() Michael S. Tsirkin
2016-07-29 3:17 ` [Qemu-devel] [PULL 39/41] vhost: add vhost_net_set_backend() Michael S. Tsirkin
2016-07-29 3:17 ` [Qemu-devel] [PULL 40/41] vhost: do not update last avail idx on get_vring_base() failure Michael S. Tsirkin
2016-07-29 3:17 ` [Qemu-devel] [PULL 41/41] mptsas: Fix a migration compatible issue Michael S. Tsirkin
2016-07-29 11:36 ` [Qemu-devel] [PULL 00/41] pc, pci, virtio: cleanups, fixes Peter Maydell
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1469762011-7902-7-git-send-email-mst@redhat.com \
--to=mst@redhat.com \
--cc=ehabkost@redhat.com \
--cc=imammedo@redhat.com \
--cc=lersek@redhat.com \
--cc=marcel@redhat.com \
--cc=pbonzini@redhat.com \
--cc=peter.maydell@linaro.org \
--cc=qemu-devel@nongnu.org \
--cc=rth@twiddle.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).