From: Igor Mammedov <imammedo@redhat.com>
To: qemu-devel@nongnu.org
Cc: pbonzini@redhat.com, ehabkost@redhat.com, mtosatti@redhat.com,
rkrcmar@redhat.com, mst@redhat.com, kevin@koconnor.net,
lersek@redhat.com
Subject: [Qemu-devel] [PATCH for-2.8 03/18] tests: acpi: extend cphp testcase with numa check
Date: Fri, 5 Aug 2016 11:46:02 +0200 [thread overview]
Message-ID: <1470390377-228219-4-git-send-email-imammedo@redhat.com> (raw)
In-Reply-To: <1470390377-228219-1-git-send-email-imammedo@redhat.com>
so it would be possible to verify _PXM generation in
DSDT and SRAT tables.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Marcel Apfelbaum <marcel@redhat.com>
---
NOTE to maintainer:
SRAT table is included in patch as it doesn't have
any chance for conflicts compared to often changing
DSDT
following table blobs should be updated in git tree as part
of this commit after running ./tests/acpi-test-data/rebuild-expected-aml.sh
tests/acpi-test-data/q35/DSDT.cphp
tests/acpi-test-data/pc/DSDT.cphp
---
tests/acpi-test-data/pc/SRAT.cphp | Bin 0 -> 304 bytes
tests/acpi-test-data/q35/SRAT.cphp | Bin 0 -> 304 bytes
tests/bios-tables-test.c | 6 ++++--
3 files changed, 4 insertions(+), 2 deletions(-)
create mode 100644 tests/acpi-test-data/pc/SRAT.cphp
create mode 100644 tests/acpi-test-data/q35/SRAT.cphp
diff --git a/tests/acpi-test-data/pc/SRAT.cphp b/tests/acpi-test-data/pc/SRAT.cphp
new file mode 100644
index 0000000000000000000000000000000000000000..ff2137642f488ec70b85207ed6c20e7351d61e98
GIT binary patch
literal 304
zcmWFzattwGWME)4bMklg2v%^42yhMtiUEZfKx_~V!f+sf!DmF1XF}yOvY_!<(fDl0
pd`1npO;83GTmZW|po75R12aq^syaB21u74tQT&BzFU&Ml8UVWm2>}2A
literal 0
HcmV?d00001
diff --git a/tests/acpi-test-data/q35/SRAT.cphp b/tests/acpi-test-data/q35/SRAT.cphp
new file mode 100644
index 0000000000000000000000000000000000000000..ff2137642f488ec70b85207ed6c20e7351d61e98
GIT binary patch
literal 304
zcmWFzattwGWME)4bMklg2v%^42yhMtiUEZfKx_~V!f+sf!DmF1XF}yOvY_!<(fDl0
pd`1npO;83GTmZW|po75R12aq^syaB21u74tQT&BzFU&Ml8UVWm2>}2A
literal 0
HcmV?d00001
diff --git a/tests/bios-tables-test.c b/tests/bios-tables-test.c
index de4019e..3796089 100644
--- a/tests/bios-tables-test.c
+++ b/tests/bios-tables-test.c
@@ -809,7 +809,8 @@ static void test_acpi_piix4_tcg_cphp(void)
data.machine = MACHINE_PC;
data.variant = ".cphp";
test_acpi_one("-machine accel=tcg"
- " -smp 2,cores=3,sockets=2,maxcpus=6",
+ " -smp 2,cores=3,sockets=2,maxcpus=6"
+ " -numa node -numa node",
&data);
free_test_data(&data);
}
@@ -822,7 +823,8 @@ static void test_acpi_q35_tcg_cphp(void)
data.machine = MACHINE_Q35;
data.variant = ".cphp";
test_acpi_one("-machine q35,accel=tcg"
- " -smp 2,cores=3,sockets=2,maxcpus=6",
+ " -smp 2,cores=3,sockets=2,maxcpus=6"
+ " -numa node -numa node",
&data);
free_test_data(&data);
}
--
2.7.4
next prev parent reply other threads:[~2016-08-05 9:46 UTC|newest]
Thread overview: 43+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-08-05 9:45 [Qemu-devel] [PATCH for-2.8 00/18] pc: q35: x2APIC support in kvm_apic mode Igor Mammedov
2016-08-05 9:46 ` [Qemu-devel] [PATCH for-2.8 01/18] numa: reduce code duplication by adding helper numa_get_node_for_cpu() Igor Mammedov
2016-08-05 9:46 ` [Qemu-devel] [PATCH for-2.8 02/18] acpi: provide _PXM method for CPU devices if QEMU is started numa enabled Igor Mammedov
2016-08-05 9:46 ` Igor Mammedov [this message]
2016-08-05 9:46 ` [Qemu-devel] [PATCH for-2.8 04/18] linux-headers: update to v4.8-rc1 Igor Mammedov
2016-08-05 9:46 ` [Qemu-devel] [PATCH for-2.8 05/18] pc: acpi: x2APIC support for MADT table Igor Mammedov
2016-08-05 9:46 ` [Qemu-devel] [PATCH for-2.8 06/18] pc: acpi: x2APIC support for SRAT table Igor Mammedov
2016-08-05 9:46 ` [Qemu-devel] [PATCH for-2.8 07/18] acpi: cphp: support x2APIC entry in cpu._MAT Igor Mammedov
2016-08-05 9:46 ` [Qemu-devel] [PATCH for-2.8 08/18] acpi: cphp: force switch to modern cpu hotplug if APIC ID > 254 Igor Mammedov
2016-08-05 9:46 ` [Qemu-devel] [PATCH for-2.8 09/18] pc: leave max apic_id_limit only in legacy cpu hotplug code Igor Mammedov
2016-08-05 9:46 ` [Qemu-devel] [PATCH for-2.8 10/18] pc: apic_common: extend APIC ID property to 32bit Igor Mammedov
2016-08-05 9:46 ` [Qemu-devel] [PATCH for-2.8 11/18] pc: apic_common: restore APIC ID to initial ID on reset Igor Mammedov
2016-08-05 9:46 ` [Qemu-devel] [PATCH for-2.8 12/18] pc: apic_common: reset APIC ID to initial ID when switching into x2APIC mode Igor Mammedov
2016-08-05 9:46 ` [Qemu-devel] [PATCH for-2.8 13/18] pc: kvm_apic: pass APIC ID depending on xAPIC/x2APIC mode Igor Mammedov
2016-08-05 9:46 ` [Qemu-devel] [PATCH for-2.8 14/18] pc: clarify FW_CFG_MAX_CPUS usage comment Igor Mammedov
2016-08-05 9:46 ` [Qemu-devel] [PATCH for-2.8 15/18] increase MAX_CPUMASK_BITS from 255 to 288 Igor Mammedov
2016-08-05 9:46 ` [Qemu-devel] [PATCH for-2.8 16/18] pc: add 'etc/boot-cpus' fw_cfg file for machine with more than 255 CPUs Igor Mammedov
2016-08-07 6:02 ` Michael S. Tsirkin
2016-08-08 11:40 ` Igor Mammedov
2016-08-05 9:46 ` [Qemu-devel] [PATCH for-2.8 17/18] pc: add 2.8 machine Igor Mammedov
2016-08-05 9:46 ` [Qemu-devel] [PATCH for-2.8 18/18] pc: q35: bump max_cpus to 288 Igor Mammedov
2016-08-08 7:41 ` [Qemu-devel] [PATCH for-2.8 00/18] pc: q35: x2APIC support in kvm_apic mode Chao Gao
2016-08-08 8:57 ` Peter Xu
2016-08-09 4:33 ` Chao Gao
2016-08-09 6:18 ` Peter Xu
2016-08-09 6:24 ` Peter Xu
2016-08-09 6:33 ` Jan Kiszka
2016-08-09 7:09 ` Peter Xu
2016-08-09 12:41 ` Radim Krčmář
2016-08-09 8:19 ` Chao Gao
2016-08-09 12:51 ` Radim Krčmář
2016-09-22 4:34 ` Chao Gao
2016-09-23 5:26 ` Peter Xu
2016-09-23 5:58 ` Lan Tianyu
2016-08-09 8:28 ` Igor Mammedov
2016-08-09 13:35 ` Peter Xu
2016-08-09 13:39 ` Luiz Capitulino
2016-08-10 8:51 ` Igor Mammedov
2016-08-11 5:10 ` Peter Xu
2016-08-11 8:56 ` Igor Mammedov
2016-08-08 9:18 ` Igor Mammedov
2016-08-09 3:23 ` Chao Gao
2016-08-09 8:18 ` Igor Mammedov
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1470390377-228219-4-git-send-email-imammedo@redhat.com \
--to=imammedo@redhat.com \
--cc=ehabkost@redhat.com \
--cc=kevin@koconnor.net \
--cc=lersek@redhat.com \
--cc=mst@redhat.com \
--cc=mtosatti@redhat.com \
--cc=pbonzini@redhat.com \
--cc=qemu-devel@nongnu.org \
--cc=rkrcmar@redhat.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).