From: "Cédric Le Goater" <clg@kaod.org>
To: Peter Maydell <peter.maydell@linaro.org>
Cc: qemu-devel@nongnu.org, qemu-arm@nongnu.org,
"Cédric Le Goater" <clg@kaod.org>
Subject: [Qemu-devel] [PATCH v4 00/10] arm: add ast2500 support
Date: Mon, 5 Sep 2016 07:59:59 +0200 [thread overview]
Message-ID: <1473055209-18864-1-git-send-email-clg@kaod.org> (raw)
The AST2500 SoC being very close to the AST2400 SoC, the goal of the
changes below is to modify the existing platform palmetto-bmc and the
AST2400 SoC to take into account the small differences and avoid code
duplication. This is mostly inspired by the realview and the rpi2
platforms.
First patches rework the 'palmetto-bmc' platform and the 'ast2400' SoC
models to provide room to other platforms and SoCs which have a common
design.
The last patches add support for the new AST2500 SoC in the required
controller (SDMC and SCU) and define a new platform for an Aspeed
evaluation board.
Thanks,
C.
Changes in v4 are :
- used -M to detect file renames
- fixed trailing comma in enums
- fixed brackets around macro parameters
- use '-1' for board ID to define device-tree-only board.
Changes in v3 are :
- ast2400.c file rename
- added a AspeedSocClass for each supported SoC
- the silicon-rev and the cpu model are now constants at the SoC level
- more precise definition of the hardware strapping register
Changes in v2 are :
- palmetto_bmc.c file rename
- SCU macros to define the hardware strapping register
Cédric Le Goater (10):
ast2400: rename the Aspeed SoC files to aspeed_soc
ast2400: replace ast2400 with aspeed_soc
aspeed-soc: provide a framework to add new SoCs
palmetto-bmc: rename the Aspeed board file to aspeed.c
palmetto-bmc: replace palmetto_bmc with aspeed
palmetto-bmc: add board specific configuration
hw/misc: use macros to define hw-strap1 register on the AST2400 Aspeed
SoC
aspeed: add a AST2500 SoC and support to the SCU and SDMC controllers
controllers
arm: add support for an ast2500 evaluation board
palmetto-bmc: remove extra no_sdcard assignement
hw/arm/Makefile.objs | 2 +-
hw/arm/aspeed.c | 187 +++++++++++++++++++++++++++++++++++
hw/arm/{ast2400.c => aspeed_soc.c} | 126 ++++++++++++++----------
hw/arm/palmetto-bmc.c | 102 --------------------
hw/misc/aspeed_scu.c | 45 ++++++++-
hw/misc/aspeed_sdmc.c | 1 +
include/hw/arm/aspeed_soc.h | 59 ++++++++++++
include/hw/arm/ast2400.h | 44 ---------
include/hw/misc/aspeed_scu.h | 193 +++++++++++++++++++++++++++++++++++++
9 files changed, 559 insertions(+), 200 deletions(-)
create mode 100644 hw/arm/aspeed.c
rename hw/arm/{ast2400.c => aspeed_soc.c} (60%)
delete mode 100644 hw/arm/palmetto-bmc.c
create mode 100644 include/hw/arm/aspeed_soc.h
delete mode 100644 include/hw/arm/ast2400.h
--
2.7.4
next reply other threads:[~2016-09-05 6:00 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-09-05 5:59 Cédric Le Goater [this message]
2016-09-05 6:00 ` [Qemu-devel] [PATCH v4 01/10] ast2400: rename the Aspeed SoC files to aspeed_soc Cédric Le Goater
2016-09-05 6:00 ` [Qemu-devel] [PATCH v4 02/10] ast2400: replace ast2400 with aspeed_soc Cédric Le Goater
2016-09-05 6:00 ` [Qemu-devel] [PATCH v4 03/10] aspeed-soc: provide a framework to add new SoCs Cédric Le Goater
2016-09-05 6:00 ` [Qemu-devel] [PATCH v4 04/10] palmetto-bmc: rename the Aspeed board file to aspeed.c Cédric Le Goater
2016-09-05 6:00 ` [Qemu-devel] [PATCH v4 05/10] palmetto-bmc: replace palmetto_bmc with aspeed Cédric Le Goater
2016-09-05 6:00 ` [Qemu-devel] [PATCH v4 06/10] palmetto-bmc: add board specific configuration Cédric Le Goater
2016-09-05 6:00 ` [Qemu-devel] [PATCH v4 07/10] hw/misc: use macros to define hw-strap1 register on the AST2400 Aspeed SoC Cédric Le Goater
2016-09-05 6:00 ` [Qemu-devel] [PATCH v4 08/10] aspeed: add a ast2500 SoC and support to the SCU and SDMC controllers Cédric Le Goater
2016-09-05 6:00 ` [Qemu-devel] [PATCH v4 09/10] arm: add support for an ast2500 evaluation board Cédric Le Goater
2016-09-05 6:00 ` [Qemu-devel] [PATCH v4 10/10] palmetto-bmc: remove extra no_sdcard assignement Cédric Le Goater
2016-09-05 16:21 ` [Qemu-devel] [PATCH v4 00/10] arm: add ast2500 support Peter Maydell
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1473055209-18864-1-git-send-email-clg@kaod.org \
--to=clg@kaod.org \
--cc=peter.maydell@linaro.org \
--cc=qemu-arm@nongnu.org \
--cc=qemu-devel@nongnu.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).