From: Nikunj A Dadhania <nikunj@linux.vnet.ibm.com>
To: qemu-ppc@nongnu.org, david@gibson.dropbear.id.au,
benh@kernel.crashing.org
Cc: alex.bennee@linaro.org, qemu-devel@nongnu.org, nikunj@linux.vnet.ibm.com
Subject: [Qemu-devel] [PATCH v5 3/3] target-ppc: tlbie/tlbivax should have global effect
Date: Mon, 19 Sep 2016 11:52:12 +0530 [thread overview]
Message-ID: <1474266132-5397-4-git-send-email-nikunj@linux.vnet.ibm.com> (raw)
In-Reply-To: <1474266132-5397-1-git-send-email-nikunj@linux.vnet.ibm.com>
tlbie (BookS) and tlbivax (BookE) plus the H_CALLs(pseries) should have
a global effect.
Introduces TLB_NEED_GLOBAL_FLUSH flag. During lazy tlb flush, after
taking care of pending local flushes, check broadcast flush(at context
synchronizing event ptesync/tlbsync, etc) is needed. Depending on the
bitmask state of the tlb_need_flush, tlb is flushed from other cpus if
needed and the flags are cleared.
Suggested-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Nikunj A Dadhania <nikunj@linux.vnet.ibm.com>
---
hw/ppc/spapr_hcall.c | 2 ++
target-ppc/cpu.h | 1 +
target-ppc/helper_regs.h | 17 +++++++++++++++++
target-ppc/mmu-hash64.c | 2 +-
target-ppc/mmu_helper.c | 10 +++++++---
target-ppc/translate.c | 6 ++++++
6 files changed, 34 insertions(+), 4 deletions(-)
diff --git a/hw/ppc/spapr_hcall.c b/hw/ppc/spapr_hcall.c
index ef12ea0..6144e17 100644
--- a/hw/ppc/spapr_hcall.c
+++ b/hw/ppc/spapr_hcall.c
@@ -319,6 +319,8 @@ static target_ulong h_protect(PowerPCCPU *cpu, sPAPRMachineState *spapr,
ppc_hash64_store_hpte(cpu, pte_index,
(v & ~HPTE64_V_VALID) | HPTE64_V_HPTE_DIRTY, 0);
ppc_hash64_tlb_flush_hpte(cpu, pte_index, v, r);
+ /* Flush the tlb */
+ check_tlb_flush(env, 1);
/* Don't need a memory barrier, due to qemu's global lock */
ppc_hash64_store_hpte(cpu, pte_index, v | HPTE64_V_HPTE_DIRTY, r);
return H_SUCCESS;
diff --git a/target-ppc/cpu.h b/target-ppc/cpu.h
index 96d2def..1c90adb 100644
--- a/target-ppc/cpu.h
+++ b/target-ppc/cpu.h
@@ -1010,6 +1010,7 @@ struct CPUPPCState {
bool kvm_sw_tlb; /* non-zero if KVM SW TLB API is active */
uint32_t tlb_need_flush; /* Delayed flush needed */
#define TLB_NEED_LOCAL_FLUSH 0x1
+#define TLB_NEED_GLOBAL_FLUSH 0x2
#endif
/* Other registers */
diff --git a/target-ppc/helper_regs.h b/target-ppc/helper_regs.h
index bcf65ce..fd2c961 100644
--- a/target-ppc/helper_regs.h
+++ b/target-ppc/helper_regs.h
@@ -161,6 +161,23 @@ static inline void check_tlb_flush(CPUPPCState *env, uint32_t global)
tlb_flush(cs, 1);
env->tlb_need_flush &= ~TLB_NEED_LOCAL_FLUSH;
}
+
+ /* Propagate TLB invalidations to other CPUs when the guest uses broadcast
+ * TLB invalidation instructions.
+ */
+ if (global && (env->tlb_need_flush & TLB_NEED_GLOBAL_FLUSH)) {
+ CPUState *other_cs;
+ CPU_FOREACH(other_cs) {
+ if (other_cs != cs) {
+ PowerPCCPU *cpu = POWERPC_CPU(other_cs);
+ CPUPPCState *other_env = &cpu->env;
+
+ other_env->tlb_need_flush &= ~TLB_NEED_LOCAL_FLUSH;
+ tlb_flush(other_cs, 1);
+ }
+ }
+ env->tlb_need_flush &= ~TLB_NEED_GLOBAL_FLUSH;
+ }
}
#else
static inline void check_tlb_flush(CPUPPCState *env, uint32_t global) { }
diff --git a/target-ppc/mmu-hash64.c b/target-ppc/mmu-hash64.c
index 1f52b64..fdb7a78 100644
--- a/target-ppc/mmu-hash64.c
+++ b/target-ppc/mmu-hash64.c
@@ -912,7 +912,7 @@ void ppc_hash64_tlb_flush_hpte(PowerPCCPU *cpu,
* invalidate, and we still don't have a tlb_flush_mask(env, n,
* mask) in QEMU, we just invalidate all TLBs
*/
- tlb_flush(CPU(cpu), 1);
+ cpu->env.tlb_need_flush = TLB_NEED_GLOBAL_FLUSH | TLB_NEED_LOCAL_FLUSH;
}
void ppc_hash64_update_rmls(CPUPPCState *env)
diff --git a/target-ppc/mmu_helper.c b/target-ppc/mmu_helper.c
index bf9f329..1dd057a 100644
--- a/target-ppc/mmu_helper.c
+++ b/target-ppc/mmu_helper.c
@@ -2757,7 +2757,7 @@ static inline void booke206_invalidate_ea_tlb(CPUPPCState *env, int tlbn,
void helper_booke206_tlbivax(CPUPPCState *env, target_ulong address)
{
- PowerPCCPU *cpu = ppc_env_get_cpu(env);
+ CPUState *cs;
if (address & 0x4) {
/* flush all entries */
@@ -2774,11 +2774,15 @@ void helper_booke206_tlbivax(CPUPPCState *env, target_ulong address)
if (address & 0x8) {
/* flush TLB1 entries */
booke206_invalidate_ea_tlb(env, 1, address);
- tlb_flush(CPU(cpu), 1);
+ CPU_FOREACH(cs) {
+ tlb_flush(cs, 1);
+ }
} else {
/* flush TLB0 entries */
booke206_invalidate_ea_tlb(env, 0, address);
- tlb_flush_page(CPU(cpu), address & MAS2_EPN_MASK);
+ CPU_FOREACH(cs) {
+ tlb_flush_page(cs, address & MAS2_EPN_MASK);
+ }
}
}
diff --git a/target-ppc/translate.c b/target-ppc/translate.c
index 1ed5868..a434ae5 100644
--- a/target-ppc/translate.c
+++ b/target-ppc/translate.c
@@ -4419,6 +4419,7 @@ static void gen_tlbie(DisasContext *ctx)
#if defined(CONFIG_USER_ONLY)
GEN_PRIV;
#else
+ TCGv_i32 t1;
CHK_HV;
if (NARROW_MODE(ctx)) {
@@ -4429,6 +4430,11 @@ static void gen_tlbie(DisasContext *ctx)
} else {
gen_helper_tlbie(cpu_env, cpu_gpr[rB(ctx->opcode)]);
}
+ t1 = tcg_temp_new_i32();
+ tcg_gen_ld_i32(t1, cpu_env, offsetof(CPUPPCState, tlb_need_flush));
+ tcg_gen_ori_i32(t1, t1, TLB_NEED_GLOBAL_FLUSH);
+ tcg_gen_st_i32(t1, cpu_env, offsetof(CPUPPCState, tlb_need_flush));
+ tcg_temp_free_i32(t1);
#endif /* defined(CONFIG_USER_ONLY) */
}
--
2.7.4
next prev parent reply other threads:[~2016-09-19 6:22 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-09-19 6:22 [Qemu-devel] [PATCH v5 0/3] ppc: handle broadcast tlb flush Nikunj A Dadhania
2016-09-19 6:22 ` [Qemu-devel] [PATCH v5 1/3] target-ppc: add TLB_NEED_LOCAL_FLUSH flag Nikunj A Dadhania
2016-09-20 6:39 ` David Gibson
2016-09-19 6:22 ` [Qemu-devel] [PATCH v5 2/3] target-ppc: add flag in chech_tlb_flush() Nikunj A Dadhania
2016-09-20 7:43 ` David Gibson
2016-09-19 6:22 ` Nikunj A Dadhania [this message]
2016-09-20 7:45 ` [Qemu-devel] [PATCH v5 3/3] target-ppc: tlbie/tlbivax should have global effect David Gibson
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1474266132-5397-4-git-send-email-nikunj@linux.vnet.ibm.com \
--to=nikunj@linux.vnet.ibm.com \
--cc=alex.bennee@linaro.org \
--cc=benh@kernel.crashing.org \
--cc=david@gibson.dropbear.id.au \
--cc=qemu-devel@nongnu.org \
--cc=qemu-ppc@nongnu.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).