* [Qemu-devel] [PULL v2 1/8] crypto: use uint64_t for pbkdf iteration count parameters
2016-09-19 15:33 [Qemu-devel] [PULL v2 0/8] Merge qcrypto 2016/09/19 Daniel P. Berrange
@ 2016-09-19 15:33 ` Daniel P. Berrange
2016-09-19 15:33 ` [Qemu-devel] [PULL v2 2/8] crypto: make PBKDF iterations configurable for LUKS format Daniel P. Berrange
` (9 subsequent siblings)
10 siblings, 0 replies; 12+ messages in thread
From: Daniel P. Berrange @ 2016-09-19 15:33 UTC (permalink / raw)
To: qemu-devel; +Cc: Peter Maydell, Daniel P. Berrange
The qcrypto_pbkdf_count_iters method uses a 64 bit int
but then checks its value against INT32_MAX before
returning it. This bounds check is premature, because
the calling code may well scale the iteration count
by some value. It is thus better to return a 64-bit
integer and let the caller do range checking.
For consistency the qcrypto_pbkdf method is also changed
to accept a 64bit int, though this is somewhat academic
since nettle is limited to taking an 'int' while gcrypt
is limited to taking a 'long int'.
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
---
crypto/block-luks.c | 52 ++++++++++++++++++++++++++++++--------------------
crypto/pbkdf-gcrypt.c | 9 ++++++++-
crypto/pbkdf-nettle.c | 8 +++++++-
crypto/pbkdf-stub.c | 2 +-
crypto/pbkdf.c | 16 +++++-----------
include/crypto/pbkdf.h | 10 +++++-----
6 files changed, 57 insertions(+), 40 deletions(-)
diff --git a/crypto/block-luks.c b/crypto/block-luks.c
index aba4455..bc086ac 100644
--- a/crypto/block-luks.c
+++ b/crypto/block-luks.c
@@ -917,6 +917,7 @@ qcrypto_block_luks_create(QCryptoBlock *block,
const char *hash_alg;
char *cipher_mode_spec = NULL;
QCryptoCipherAlgorithm ivcipheralg = 0;
+ uint64_t iters;
memcpy(&luks_opts, &options->u.luks, sizeof(luks_opts));
if (!luks_opts.has_cipher_alg) {
@@ -1064,12 +1065,11 @@ qcrypto_block_luks_create(QCryptoBlock *block,
/* Determine how many iterations we need to hash the master
* key, in order to have 1 second of compute time used
*/
- luks->header.master_key_iterations =
- qcrypto_pbkdf2_count_iters(luks_opts.hash_alg,
- masterkey, luks->header.key_bytes,
- luks->header.master_key_salt,
- QCRYPTO_BLOCK_LUKS_SALT_LEN,
- &local_err);
+ iters = qcrypto_pbkdf2_count_iters(luks_opts.hash_alg,
+ masterkey, luks->header.key_bytes,
+ luks->header.master_key_salt,
+ QCRYPTO_BLOCK_LUKS_SALT_LEN,
+ &local_err);
if (local_err) {
error_propagate(errp, local_err);
goto error;
@@ -1079,11 +1079,15 @@ qcrypto_block_luks_create(QCryptoBlock *block,
* explanation why they chose /= 8... Probably so that
* if all 8 keyslots are active we only spend 1 second
* in total time to check all keys */
- luks->header.master_key_iterations /= 8;
- luks->header.master_key_iterations = MAX(
- luks->header.master_key_iterations,
- QCRYPTO_BLOCK_LUKS_MIN_MASTER_KEY_ITERS);
-
+ iters /= 8;
+ if (iters > UINT32_MAX) {
+ error_setg_errno(errp, ERANGE,
+ "PBKDF iterations %llu larger than %u",
+ (unsigned long long)iters, UINT32_MAX);
+ goto error;
+ }
+ iters = MAX(iters, QCRYPTO_BLOCK_LUKS_MIN_MASTER_KEY_ITERS);
+ luks->header.master_key_iterations = iters;
/* Hash the master key, saving the result in the LUKS
* header. This hash is used when opening the encrypted
@@ -1131,22 +1135,28 @@ qcrypto_block_luks_create(QCryptoBlock *block,
/* Again we determine how many iterations are required to
* hash the user password while consuming 1 second of compute
* time */
- luks->header.key_slots[0].iterations =
- qcrypto_pbkdf2_count_iters(luks_opts.hash_alg,
- (uint8_t *)password, strlen(password),
- luks->header.key_slots[0].salt,
- QCRYPTO_BLOCK_LUKS_SALT_LEN,
- &local_err);
+ iters = qcrypto_pbkdf2_count_iters(luks_opts.hash_alg,
+ (uint8_t *)password, strlen(password),
+ luks->header.key_slots[0].salt,
+ QCRYPTO_BLOCK_LUKS_SALT_LEN,
+ &local_err);
if (local_err) {
error_propagate(errp, local_err);
goto error;
}
/* Why /= 2 ? That matches cryptsetup, but there's no
* explanation why they chose /= 2... */
- luks->header.key_slots[0].iterations /= 2;
- luks->header.key_slots[0].iterations = MAX(
- luks->header.key_slots[0].iterations,
- QCRYPTO_BLOCK_LUKS_MIN_SLOT_KEY_ITERS);
+ iters /= 2;
+
+ if (iters > UINT32_MAX) {
+ error_setg_errno(errp, ERANGE,
+ "PBKDF iterations %llu larger than %u",
+ (unsigned long long)iters, UINT32_MAX);
+ goto error;
+ }
+
+ luks->header.key_slots[0].iterations =
+ MAX(iters, QCRYPTO_BLOCK_LUKS_MIN_SLOT_KEY_ITERS);
/* Generate a key that we'll use to encrypt the master
diff --git a/crypto/pbkdf-gcrypt.c b/crypto/pbkdf-gcrypt.c
index 34af3a9..44cf31a 100644
--- a/crypto/pbkdf-gcrypt.c
+++ b/crypto/pbkdf-gcrypt.c
@@ -38,7 +38,7 @@ bool qcrypto_pbkdf2_supports(QCryptoHashAlgorithm hash)
int qcrypto_pbkdf2(QCryptoHashAlgorithm hash,
const uint8_t *key, size_t nkey,
const uint8_t *salt, size_t nsalt,
- unsigned int iterations,
+ uint64_t iterations,
uint8_t *out, size_t nout,
Error **errp)
{
@@ -49,6 +49,13 @@ int qcrypto_pbkdf2(QCryptoHashAlgorithm hash,
};
int ret;
+ if (iterations > ULONG_MAX) {
+ error_setg_errno(errp, ERANGE,
+ "PBKDF iterations %llu must be less than %lu",
+ (long long unsigned)iterations, ULONG_MAX);
+ return -1;
+ }
+
if (hash >= G_N_ELEMENTS(hash_map) ||
hash_map[hash] == GCRY_MD_NONE) {
error_setg(errp, "Unexpected hash algorithm %d", hash);
diff --git a/crypto/pbkdf-nettle.c b/crypto/pbkdf-nettle.c
index d681a60..db81517 100644
--- a/crypto/pbkdf-nettle.c
+++ b/crypto/pbkdf-nettle.c
@@ -38,10 +38,16 @@ bool qcrypto_pbkdf2_supports(QCryptoHashAlgorithm hash)
int qcrypto_pbkdf2(QCryptoHashAlgorithm hash,
const uint8_t *key, size_t nkey,
const uint8_t *salt, size_t nsalt,
- unsigned int iterations,
+ uint64_t iterations,
uint8_t *out, size_t nout,
Error **errp)
{
+ if (iterations > UINT_MAX) {
+ error_setg_errno(errp, ERANGE,
+ "PBKDF iterations %llu must be less than %u",
+ (long long unsigned)iterations, UINT_MAX);
+ return -1;
+ }
switch (hash) {
case QCRYPTO_HASH_ALG_SHA1:
pbkdf2_hmac_sha1(nkey, key,
diff --git a/crypto/pbkdf-stub.c b/crypto/pbkdf-stub.c
index 266a505..a15044d 100644
--- a/crypto/pbkdf-stub.c
+++ b/crypto/pbkdf-stub.c
@@ -32,7 +32,7 @@ int qcrypto_pbkdf2(QCryptoHashAlgorithm hash G_GNUC_UNUSED,
size_t nkey G_GNUC_UNUSED,
const uint8_t *salt G_GNUC_UNUSED,
size_t nsalt G_GNUC_UNUSED,
- unsigned int iterations G_GNUC_UNUSED,
+ uint64_t iterations G_GNUC_UNUSED,
uint8_t *out G_GNUC_UNUSED,
size_t nout G_GNUC_UNUSED,
Error **errp)
diff --git a/crypto/pbkdf.c b/crypto/pbkdf.c
index 695cc35..929458b 100644
--- a/crypto/pbkdf.c
+++ b/crypto/pbkdf.c
@@ -62,13 +62,13 @@ static int qcrypto_pbkdf2_get_thread_cpu(unsigned long long *val_ms,
#endif
}
-int qcrypto_pbkdf2_count_iters(QCryptoHashAlgorithm hash,
- const uint8_t *key, size_t nkey,
- const uint8_t *salt, size_t nsalt,
- Error **errp)
+uint64_t qcrypto_pbkdf2_count_iters(QCryptoHashAlgorithm hash,
+ const uint8_t *key, size_t nkey,
+ const uint8_t *salt, size_t nsalt,
+ Error **errp)
{
uint8_t out[32];
- long long int iterations = (1 << 15);
+ uint64_t iterations = (1 << 15);
unsigned long long delta_ms, start_ms, end_ms;
while (1) {
@@ -100,11 +100,5 @@ int qcrypto_pbkdf2_count_iters(QCryptoHashAlgorithm hash,
iterations = iterations * 1000 / delta_ms;
- if (iterations > INT32_MAX) {
- error_setg(errp, "Iterations %lld too large for a 32-bit int",
- iterations);
- return -1;
- }
-
return iterations;
}
diff --git a/include/crypto/pbkdf.h b/include/crypto/pbkdf.h
index e9e4cec..6f4ac85 100644
--- a/include/crypto/pbkdf.h
+++ b/include/crypto/pbkdf.h
@@ -122,7 +122,7 @@ bool qcrypto_pbkdf2_supports(QCryptoHashAlgorithm hash);
int qcrypto_pbkdf2(QCryptoHashAlgorithm hash,
const uint8_t *key, size_t nkey,
const uint8_t *salt, size_t nsalt,
- unsigned int iterations,
+ uint64_t iterations,
uint8_t *out, size_t nout,
Error **errp);
@@ -144,9 +144,9 @@ int qcrypto_pbkdf2(QCryptoHashAlgorithm hash,
*
* Returns: number of iterations in 1 second, -1 on error
*/
-int qcrypto_pbkdf2_count_iters(QCryptoHashAlgorithm hash,
- const uint8_t *key, size_t nkey,
- const uint8_t *salt, size_t nsalt,
- Error **errp);
+uint64_t qcrypto_pbkdf2_count_iters(QCryptoHashAlgorithm hash,
+ const uint8_t *key, size_t nkey,
+ const uint8_t *salt, size_t nsalt,
+ Error **errp);
#endif /* QCRYPTO_PBKDF_H */
--
2.7.4
^ permalink raw reply related [flat|nested] 12+ messages in thread* [Qemu-devel] [PULL v2 2/8] crypto: make PBKDF iterations configurable for LUKS format
2016-09-19 15:33 [Qemu-devel] [PULL v2 0/8] Merge qcrypto 2016/09/19 Daniel P. Berrange
2016-09-19 15:33 ` [Qemu-devel] [PULL v2 1/8] crypto: use uint64_t for pbkdf iteration count parameters Daniel P. Berrange
@ 2016-09-19 15:33 ` Daniel P. Berrange
2016-09-19 15:33 ` [Qemu-devel] [PULL v2 3/8] crypto: clear out buffer after timing pbkdf algorithm Daniel P. Berrange
` (8 subsequent siblings)
10 siblings, 0 replies; 12+ messages in thread
From: Daniel P. Berrange @ 2016-09-19 15:33 UTC (permalink / raw)
To: qemu-devel; +Cc: Peter Maydell, Daniel P. Berrange
As protection against bruteforcing passphrases, the PBKDF
algorithm is tuned by counting the number of iterations
needed to produce 1 second of running time. If the machine
that the image will be used on is much faster than the
machine where the image is created, it can be desirable
to raise the number of iterations. This change adds a new
'iter-time' property that allows the user to choose the
iteration wallclock time.
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
---
block/crypto.c | 6 ++++++
crypto/block-luks.c | 24 ++++++++++++++++++++++++
qapi/crypto.json | 6 +++++-
3 files changed, 35 insertions(+), 1 deletion(-)
diff --git a/block/crypto.c b/block/crypto.c
index 7f61e12..7aa7eb5 100644
--- a/block/crypto.c
+++ b/block/crypto.c
@@ -33,6 +33,7 @@
#define BLOCK_CRYPTO_OPT_LUKS_IVGEN_ALG "ivgen-alg"
#define BLOCK_CRYPTO_OPT_LUKS_IVGEN_HASH_ALG "ivgen-hash-alg"
#define BLOCK_CRYPTO_OPT_LUKS_HASH_ALG "hash-alg"
+#define BLOCK_CRYPTO_OPT_LUKS_ITER_TIME "iter-time"
typedef struct BlockCrypto BlockCrypto;
@@ -183,6 +184,11 @@ static QemuOptsList block_crypto_create_opts_luks = {
.type = QEMU_OPT_STRING,
.help = "Name of encryption hash algorithm",
},
+ {
+ .name = BLOCK_CRYPTO_OPT_LUKS_ITER_TIME,
+ .type = QEMU_OPT_NUMBER,
+ .help = "Time to spend in PBKDF in milliseconds",
+ },
{ /* end of list */ }
},
};
diff --git a/crypto/block-luks.c b/crypto/block-luks.c
index bc086ac..91a4172 100644
--- a/crypto/block-luks.c
+++ b/crypto/block-luks.c
@@ -920,6 +920,9 @@ qcrypto_block_luks_create(QCryptoBlock *block,
uint64_t iters;
memcpy(&luks_opts, &options->u.luks, sizeof(luks_opts));
+ if (!luks_opts.has_iter_time) {
+ luks_opts.iter_time = 1000;
+ }
if (!luks_opts.has_cipher_alg) {
luks_opts.cipher_alg = QCRYPTO_CIPHER_ALG_AES_256;
}
@@ -1075,6 +1078,16 @@ qcrypto_block_luks_create(QCryptoBlock *block,
goto error;
}
+ if (iters > (ULLONG_MAX / luks_opts.iter_time)) {
+ error_setg_errno(errp, ERANGE,
+ "PBKDF iterations %llu too large to scale",
+ (unsigned long long)iters);
+ goto error;
+ }
+
+ /* iter_time was in millis, but count_iters reported for secs */
+ iters = iters * luks_opts.iter_time / 1000;
+
/* Why /= 8 ? That matches cryptsetup, but there's no
* explanation why they chose /= 8... Probably so that
* if all 8 keyslots are active we only spend 1 second
@@ -1144,6 +1157,17 @@ qcrypto_block_luks_create(QCryptoBlock *block,
error_propagate(errp, local_err);
goto error;
}
+
+ if (iters > (ULLONG_MAX / luks_opts.iter_time)) {
+ error_setg_errno(errp, ERANGE,
+ "PBKDF iterations %llu too large to scale",
+ (unsigned long long)iters);
+ goto error;
+ }
+
+ /* iter_time was in millis, but count_iters reported for secs */
+ iters = iters * luks_opts.iter_time / 1000;
+
/* Why /= 2 ? That matches cryptsetup, but there's no
* explanation why they chose /= 2... */
iters /= 2;
diff --git a/qapi/crypto.json b/qapi/crypto.json
index 34d2583..2b6118f 100644
--- a/qapi/crypto.json
+++ b/qapi/crypto.json
@@ -185,6 +185,9 @@
# Currently defaults to 'sha256'
# @hash-alg: #optional the master key hash algorithm
# Currently defaults to 'sha256'
+# @iter-time: #optional number of milliseconds to spend in
+# PBKDF passphrase processing. Currently defaults
+# to 1000. (since 2.8)
# Since: 2.6
##
{ 'struct': 'QCryptoBlockCreateOptionsLUKS',
@@ -193,7 +196,8 @@
'*cipher-mode': 'QCryptoCipherMode',
'*ivgen-alg': 'QCryptoIVGenAlgorithm',
'*ivgen-hash-alg': 'QCryptoHashAlgorithm',
- '*hash-alg': 'QCryptoHashAlgorithm'}}
+ '*hash-alg': 'QCryptoHashAlgorithm',
+ '*iter-time': 'int'}}
##
--
2.7.4
^ permalink raw reply related [flat|nested] 12+ messages in thread* [Qemu-devel] [PULL v2 3/8] crypto: clear out buffer after timing pbkdf algorithm
2016-09-19 15:33 [Qemu-devel] [PULL v2 0/8] Merge qcrypto 2016/09/19 Daniel P. Berrange
2016-09-19 15:33 ` [Qemu-devel] [PULL v2 1/8] crypto: use uint64_t for pbkdf iteration count parameters Daniel P. Berrange
2016-09-19 15:33 ` [Qemu-devel] [PULL v2 2/8] crypto: make PBKDF iterations configurable for LUKS format Daniel P. Berrange
@ 2016-09-19 15:33 ` Daniel P. Berrange
2016-09-19 15:33 ` [Qemu-devel] [PULL v2 4/8] crypto: use correct derived key size when timing pbkdf Daniel P. Berrange
` (7 subsequent siblings)
10 siblings, 0 replies; 12+ messages in thread
From: Daniel P. Berrange @ 2016-09-19 15:33 UTC (permalink / raw)
To: qemu-devel; +Cc: Peter Maydell, Daniel P. Berrange
The 'out' buffer will hold a key derived from master
password, so it is best practice to clear this buffer
when no longer required.
At this time, the code isn't worrying about locking
buffers into RAM to prevent swapping sensitive data
to disk.
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
---
crypto/pbkdf.c | 13 +++++++++----
1 file changed, 9 insertions(+), 4 deletions(-)
diff --git a/crypto/pbkdf.c b/crypto/pbkdf.c
index 929458b..e391505 100644
--- a/crypto/pbkdf.c
+++ b/crypto/pbkdf.c
@@ -67,13 +67,14 @@ uint64_t qcrypto_pbkdf2_count_iters(QCryptoHashAlgorithm hash,
const uint8_t *salt, size_t nsalt,
Error **errp)
{
+ uint64_t ret = -1;
uint8_t out[32];
uint64_t iterations = (1 << 15);
unsigned long long delta_ms, start_ms, end_ms;
while (1) {
if (qcrypto_pbkdf2_get_thread_cpu(&start_ms, errp) < 0) {
- return -1;
+ goto cleanup;
}
if (qcrypto_pbkdf2(hash,
key, nkey,
@@ -81,10 +82,10 @@ uint64_t qcrypto_pbkdf2_count_iters(QCryptoHashAlgorithm hash,
iterations,
out, sizeof(out),
errp) < 0) {
- return -1;
+ goto cleanup;
}
if (qcrypto_pbkdf2_get_thread_cpu(&end_ms, errp) < 0) {
- return -1;
+ goto cleanup;
}
delta_ms = end_ms - start_ms;
@@ -100,5 +101,9 @@ uint64_t qcrypto_pbkdf2_count_iters(QCryptoHashAlgorithm hash,
iterations = iterations * 1000 / delta_ms;
- return iterations;
+ ret = iterations;
+
+ cleanup:
+ memset(out, 0, sizeof(out));
+ return ret;
}
--
2.7.4
^ permalink raw reply related [flat|nested] 12+ messages in thread* [Qemu-devel] [PULL v2 4/8] crypto: use correct derived key size when timing pbkdf
2016-09-19 15:33 [Qemu-devel] [PULL v2 0/8] Merge qcrypto 2016/09/19 Daniel P. Berrange
` (2 preceding siblings ...)
2016-09-19 15:33 ` [Qemu-devel] [PULL v2 3/8] crypto: clear out buffer after timing pbkdf algorithm Daniel P. Berrange
@ 2016-09-19 15:33 ` Daniel P. Berrange
2016-09-19 15:33 ` [Qemu-devel] [PULL v2 5/8] crypto: remove bogus /= 2 for pbkdf iterations Daniel P. Berrange
` (6 subsequent siblings)
10 siblings, 0 replies; 12+ messages in thread
From: Daniel P. Berrange @ 2016-09-19 15:33 UTC (permalink / raw)
To: qemu-devel; +Cc: Peter Maydell, Daniel P. Berrange
Currently when timing the pbkdf algorithm a fixed key
size of 32 bytes is used. This results in inaccurate
timings for certain hashes depending on their digest
size. For example when using sha1 with aes-256, this
causes us to measure time for the master key digest
doing 2 sha1 operations per iteration, instead of 1.
Instead we should pass in the desired key size to the
timing routine that matches the key size that will be
used for real later.
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
---
crypto/block-luks.c | 2 ++
crypto/pbkdf.c | 10 +++++++---
include/crypto/pbkdf.h | 6 +++++-
tests/test-crypto-pbkdf.c | 1 +
4 files changed, 15 insertions(+), 4 deletions(-)
diff --git a/crypto/block-luks.c b/crypto/block-luks.c
index 91a4172..9269aaf 100644
--- a/crypto/block-luks.c
+++ b/crypto/block-luks.c
@@ -1072,6 +1072,7 @@ qcrypto_block_luks_create(QCryptoBlock *block,
masterkey, luks->header.key_bytes,
luks->header.master_key_salt,
QCRYPTO_BLOCK_LUKS_SALT_LEN,
+ QCRYPTO_BLOCK_LUKS_DIGEST_LEN,
&local_err);
if (local_err) {
error_propagate(errp, local_err);
@@ -1152,6 +1153,7 @@ qcrypto_block_luks_create(QCryptoBlock *block,
(uint8_t *)password, strlen(password),
luks->header.key_slots[0].salt,
QCRYPTO_BLOCK_LUKS_SALT_LEN,
+ luks->header.key_bytes,
&local_err);
if (local_err) {
error_propagate(errp, local_err);
diff --git a/crypto/pbkdf.c b/crypto/pbkdf.c
index e391505..f22e71d 100644
--- a/crypto/pbkdf.c
+++ b/crypto/pbkdf.c
@@ -65,13 +65,16 @@ static int qcrypto_pbkdf2_get_thread_cpu(unsigned long long *val_ms,
uint64_t qcrypto_pbkdf2_count_iters(QCryptoHashAlgorithm hash,
const uint8_t *key, size_t nkey,
const uint8_t *salt, size_t nsalt,
+ size_t nout,
Error **errp)
{
uint64_t ret = -1;
- uint8_t out[32];
+ uint8_t *out;
uint64_t iterations = (1 << 15);
unsigned long long delta_ms, start_ms, end_ms;
+ out = g_new(uint8_t, nout);
+
while (1) {
if (qcrypto_pbkdf2_get_thread_cpu(&start_ms, errp) < 0) {
goto cleanup;
@@ -80,7 +83,7 @@ uint64_t qcrypto_pbkdf2_count_iters(QCryptoHashAlgorithm hash,
key, nkey,
salt, nsalt,
iterations,
- out, sizeof(out),
+ out, nout,
errp) < 0) {
goto cleanup;
}
@@ -104,6 +107,7 @@ uint64_t qcrypto_pbkdf2_count_iters(QCryptoHashAlgorithm hash,
ret = iterations;
cleanup:
- memset(out, 0, sizeof(out));
+ memset(out, 0, nout);
+ g_free(out);
return ret;
}
diff --git a/include/crypto/pbkdf.h b/include/crypto/pbkdf.h
index 6f4ac85..ef209b3 100644
--- a/include/crypto/pbkdf.h
+++ b/include/crypto/pbkdf.h
@@ -133,6 +133,7 @@ int qcrypto_pbkdf2(QCryptoHashAlgorithm hash,
* @nkey: the length of @key in bytes
* @salt: a random salt
* @nsalt: length of @salt in bytes
+ * @nout: size of desired derived key
* @errp: pointer to a NULL-initialized error object
*
* Time the PBKDF2 algorithm to determine how many
@@ -140,13 +141,16 @@ int qcrypto_pbkdf2(QCryptoHashAlgorithm hash,
* key from a user password provided in @key in 1
* second of compute time. The result of this can
* be used as a the @iterations parameter of a later
- * call to qcrypto_pbkdf2().
+ * call to qcrypto_pbkdf2(). The value of @nout should
+ * match that value that will later be provided with
+ * a call to qcrypto_pbkdf2().
*
* Returns: number of iterations in 1 second, -1 on error
*/
uint64_t qcrypto_pbkdf2_count_iters(QCryptoHashAlgorithm hash,
const uint8_t *key, size_t nkey,
const uint8_t *salt, size_t nsalt,
+ size_t nout,
Error **errp);
#endif /* QCRYPTO_PBKDF_H */
diff --git a/tests/test-crypto-pbkdf.c b/tests/test-crypto-pbkdf.c
index 8ceceb1..a651dc5 100644
--- a/tests/test-crypto-pbkdf.c
+++ b/tests/test-crypto-pbkdf.c
@@ -358,6 +358,7 @@ static void test_pbkdf_timing(void)
iters = qcrypto_pbkdf2_count_iters(QCRYPTO_HASH_ALG_SHA256,
key, sizeof(key),
salt, sizeof(salt),
+ 32,
&error_abort);
g_assert(iters >= (1 << 15));
--
2.7.4
^ permalink raw reply related [flat|nested] 12+ messages in thread* [Qemu-devel] [PULL v2 5/8] crypto: remove bogus /= 2 for pbkdf iterations
2016-09-19 15:33 [Qemu-devel] [PULL v2 0/8] Merge qcrypto 2016/09/19 Daniel P. Berrange
` (3 preceding siblings ...)
2016-09-19 15:33 ` [Qemu-devel] [PULL v2 4/8] crypto: use correct derived key size when timing pbkdf Daniel P. Berrange
@ 2016-09-19 15:33 ` Daniel P. Berrange
2016-09-19 15:33 ` [Qemu-devel] [PULL v2 6/8] crypto: increase default pbkdf2 time for luks to 2 seconds Daniel P. Berrange
` (5 subsequent siblings)
10 siblings, 0 replies; 12+ messages in thread
From: Daniel P. Berrange @ 2016-09-19 15:33 UTC (permalink / raw)
To: qemu-devel; +Cc: Peter Maydell, Daniel P. Berrange
When calculating iterations for pbkdf of the key slot
data, we had a /= 2, which was copied from identical
code in cryptsetup. It was always unclear & undocumented
why cryptsetup had this division and it was recently
removed there, too.
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
---
crypto/block-luks.c | 4 ----
1 file changed, 4 deletions(-)
diff --git a/crypto/block-luks.c b/crypto/block-luks.c
index 9269aaf..3ab3250 100644
--- a/crypto/block-luks.c
+++ b/crypto/block-luks.c
@@ -1170,10 +1170,6 @@ qcrypto_block_luks_create(QCryptoBlock *block,
/* iter_time was in millis, but count_iters reported for secs */
iters = iters * luks_opts.iter_time / 1000;
- /* Why /= 2 ? That matches cryptsetup, but there's no
- * explanation why they chose /= 2... */
- iters /= 2;
-
if (iters > UINT32_MAX) {
error_setg_errno(errp, ERANGE,
"PBKDF iterations %llu larger than %u",
--
2.7.4
^ permalink raw reply related [flat|nested] 12+ messages in thread* [Qemu-devel] [PULL v2 6/8] crypto: increase default pbkdf2 time for luks to 2 seconds
2016-09-19 15:33 [Qemu-devel] [PULL v2 0/8] Merge qcrypto 2016/09/19 Daniel P. Berrange
` (4 preceding siblings ...)
2016-09-19 15:33 ` [Qemu-devel] [PULL v2 5/8] crypto: remove bogus /= 2 for pbkdf iterations Daniel P. Berrange
@ 2016-09-19 15:33 ` Daniel P. Berrange
2016-09-19 15:33 ` [Qemu-devel] [PULL v2 7/8] crypto: support more hash algorithms for pbkdf Daniel P. Berrange
` (4 subsequent siblings)
10 siblings, 0 replies; 12+ messages in thread
From: Daniel P. Berrange @ 2016-09-19 15:33 UTC (permalink / raw)
To: qemu-devel; +Cc: Peter Maydell, Daniel P. Berrange
cryptsetup recently increased the default pbkdf2 time to 2 seconds
to partially mitigate improvements in hardware performance wrt
brute-forcing the pbkdf algorithm. This updates QEMU defaults to
match.
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
---
crypto/block-luks.c | 2 +-
qapi/crypto.json | 2 +-
2 files changed, 2 insertions(+), 2 deletions(-)
diff --git a/crypto/block-luks.c b/crypto/block-luks.c
index 3ab3250..a848232 100644
--- a/crypto/block-luks.c
+++ b/crypto/block-luks.c
@@ -921,7 +921,7 @@ qcrypto_block_luks_create(QCryptoBlock *block,
memcpy(&luks_opts, &options->u.luks, sizeof(luks_opts));
if (!luks_opts.has_iter_time) {
- luks_opts.iter_time = 1000;
+ luks_opts.iter_time = 2000;
}
if (!luks_opts.has_cipher_alg) {
luks_opts.cipher_alg = QCRYPTO_CIPHER_ALG_AES_256;
diff --git a/qapi/crypto.json b/qapi/crypto.json
index 2b6118f..6933b13 100644
--- a/qapi/crypto.json
+++ b/qapi/crypto.json
@@ -187,7 +187,7 @@
# Currently defaults to 'sha256'
# @iter-time: #optional number of milliseconds to spend in
# PBKDF passphrase processing. Currently defaults
-# to 1000. (since 2.8)
+# to 2000. (since 2.8)
# Since: 2.6
##
{ 'struct': 'QCryptoBlockCreateOptionsLUKS',
--
2.7.4
^ permalink raw reply related [flat|nested] 12+ messages in thread* [Qemu-devel] [PULL v2 7/8] crypto: support more hash algorithms for pbkdf
2016-09-19 15:33 [Qemu-devel] [PULL v2 0/8] Merge qcrypto 2016/09/19 Daniel P. Berrange
` (5 preceding siblings ...)
2016-09-19 15:33 ` [Qemu-devel] [PULL v2 6/8] crypto: increase default pbkdf2 time for luks to 2 seconds Daniel P. Berrange
@ 2016-09-19 15:33 ` Daniel P. Berrange
2016-09-19 15:33 ` [Qemu-devel] [PULL v2 8/8] crypto: add trace points for TLS cert verification Daniel P. Berrange
` (3 subsequent siblings)
10 siblings, 0 replies; 12+ messages in thread
From: Daniel P. Berrange @ 2016-09-19 15:33 UTC (permalink / raw)
To: qemu-devel; +Cc: Peter Maydell, Daniel P. Berrange
Currently pbkdf is only supported with SHA1 and SHA256. Expand
this to support all algorithms known to QEMU.
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
---
crypto/pbkdf-gcrypt.c | 12 ++++++++-
crypto/pbkdf-nettle.c | 63 ++++++++++++++++++++++++++++++++++++++++-------
tests/test-crypto-pbkdf.c | 53 ++++++++++++++++++++++++++++++++++++++-
3 files changed, 117 insertions(+), 11 deletions(-)
diff --git a/crypto/pbkdf-gcrypt.c b/crypto/pbkdf-gcrypt.c
index 44cf31a..4028985 100644
--- a/crypto/pbkdf-gcrypt.c
+++ b/crypto/pbkdf-gcrypt.c
@@ -28,7 +28,11 @@ bool qcrypto_pbkdf2_supports(QCryptoHashAlgorithm hash)
switch (hash) {
case QCRYPTO_HASH_ALG_MD5:
case QCRYPTO_HASH_ALG_SHA1:
+ case QCRYPTO_HASH_ALG_SHA224:
case QCRYPTO_HASH_ALG_SHA256:
+ case QCRYPTO_HASH_ALG_SHA384:
+ case QCRYPTO_HASH_ALG_SHA512:
+ case QCRYPTO_HASH_ALG_RIPEMD160:
return true;
default:
return false;
@@ -45,7 +49,11 @@ int qcrypto_pbkdf2(QCryptoHashAlgorithm hash,
static const int hash_map[QCRYPTO_HASH_ALG__MAX] = {
[QCRYPTO_HASH_ALG_MD5] = GCRY_MD_MD5,
[QCRYPTO_HASH_ALG_SHA1] = GCRY_MD_SHA1,
+ [QCRYPTO_HASH_ALG_SHA224] = GCRY_MD_SHA224,
[QCRYPTO_HASH_ALG_SHA256] = GCRY_MD_SHA256,
+ [QCRYPTO_HASH_ALG_SHA384] = GCRY_MD_SHA384,
+ [QCRYPTO_HASH_ALG_SHA512] = GCRY_MD_SHA512,
+ [QCRYPTO_HASH_ALG_RIPEMD160] = GCRY_MD_RMD160,
};
int ret;
@@ -58,7 +66,9 @@ int qcrypto_pbkdf2(QCryptoHashAlgorithm hash,
if (hash >= G_N_ELEMENTS(hash_map) ||
hash_map[hash] == GCRY_MD_NONE) {
- error_setg(errp, "Unexpected hash algorithm %d", hash);
+ error_setg_errno(errp, ENOSYS,
+ "PBKDF does not support hash algorithm %s",
+ QCryptoHashAlgorithm_lookup[hash]);
return -1;
}
diff --git a/crypto/pbkdf-nettle.c b/crypto/pbkdf-nettle.c
index db81517..6fb2671 100644
--- a/crypto/pbkdf-nettle.c
+++ b/crypto/pbkdf-nettle.c
@@ -20,6 +20,7 @@
#include "qemu/osdep.h"
#include <nettle/pbkdf2.h>
+#include <nettle/hmac.h>
#include "qapi/error.h"
#include "crypto/pbkdf.h"
@@ -28,7 +29,11 @@ bool qcrypto_pbkdf2_supports(QCryptoHashAlgorithm hash)
{
switch (hash) {
case QCRYPTO_HASH_ALG_SHA1:
+ case QCRYPTO_HASH_ALG_SHA224:
case QCRYPTO_HASH_ALG_SHA256:
+ case QCRYPTO_HASH_ALG_SHA384:
+ case QCRYPTO_HASH_ALG_SHA512:
+ case QCRYPTO_HASH_ALG_RIPEMD160:
return true;
default:
return false;
@@ -42,30 +47,70 @@ int qcrypto_pbkdf2(QCryptoHashAlgorithm hash,
uint8_t *out, size_t nout,
Error **errp)
{
+ union {
+ struct hmac_md5_ctx md5;
+ struct hmac_sha1_ctx sha1;
+ struct hmac_sha224_ctx sha224;
+ struct hmac_sha256_ctx sha256;
+ struct hmac_sha384_ctx sha384;
+ struct hmac_sha512_ctx sha512;
+ struct hmac_ripemd160_ctx ripemd160;
+ } ctx;
+
if (iterations > UINT_MAX) {
error_setg_errno(errp, ERANGE,
"PBKDF iterations %llu must be less than %u",
(long long unsigned)iterations, UINT_MAX);
return -1;
}
+
switch (hash) {
+ case QCRYPTO_HASH_ALG_MD5:
+ hmac_md5_set_key(&ctx.md5, nkey, key);
+ PBKDF2(&ctx.md5, hmac_md5_update, hmac_md5_digest,
+ MD5_DIGEST_SIZE, iterations, nsalt, salt, nout, out);
+ break;
+
case QCRYPTO_HASH_ALG_SHA1:
- pbkdf2_hmac_sha1(nkey, key,
- iterations,
- nsalt, salt,
- nout, out);
+ hmac_sha1_set_key(&ctx.sha1, nkey, key);
+ PBKDF2(&ctx.sha1, hmac_sha1_update, hmac_sha1_digest,
+ SHA1_DIGEST_SIZE, iterations, nsalt, salt, nout, out);
+ break;
+
+ case QCRYPTO_HASH_ALG_SHA224:
+ hmac_sha224_set_key(&ctx.sha224, nkey, key);
+ PBKDF2(&ctx.sha224, hmac_sha224_update, hmac_sha224_digest,
+ SHA224_DIGEST_SIZE, iterations, nsalt, salt, nout, out);
break;
case QCRYPTO_HASH_ALG_SHA256:
- pbkdf2_hmac_sha256(nkey, key,
- iterations,
- nsalt, salt,
- nout, out);
+ hmac_sha256_set_key(&ctx.sha256, nkey, key);
+ PBKDF2(&ctx.sha256, hmac_sha256_update, hmac_sha256_digest,
+ SHA256_DIGEST_SIZE, iterations, nsalt, salt, nout, out);
+ break;
+
+ case QCRYPTO_HASH_ALG_SHA384:
+ hmac_sha384_set_key(&ctx.sha384, nkey, key);
+ PBKDF2(&ctx.sha384, hmac_sha384_update, hmac_sha384_digest,
+ SHA384_DIGEST_SIZE, iterations, nsalt, salt, nout, out);
+ break;
+
+ case QCRYPTO_HASH_ALG_SHA512:
+ hmac_sha512_set_key(&ctx.sha512, nkey, key);
+ PBKDF2(&ctx.sha512, hmac_sha512_update, hmac_sha512_digest,
+ SHA512_DIGEST_SIZE, iterations, nsalt, salt, nout, out);
+ break;
+
+ case QCRYPTO_HASH_ALG_RIPEMD160:
+ hmac_ripemd160_set_key(&ctx.ripemd160, nkey, key);
+ PBKDF2(&ctx.ripemd160, hmac_ripemd160_update, hmac_ripemd160_digest,
+ RIPEMD160_DIGEST_SIZE, iterations, nsalt, salt, nout, out);
break;
default:
error_setg_errno(errp, ENOSYS,
- "PBKDF does not support hash algorithm %d", hash);
+ "PBKDF does not support hash algorithm %s",
+ QCryptoHashAlgorithm_lookup[hash]);
return -1;
}
return 0;
diff --git a/tests/test-crypto-pbkdf.c b/tests/test-crypto-pbkdf.c
index a651dc5..d937aff 100644
--- a/tests/test-crypto-pbkdf.c
+++ b/tests/test-crypto-pbkdf.c
@@ -261,7 +261,6 @@ static QCryptoPbkdfTestData test_data[] = {
"\xcc\x4a\x5e\x6d\xca\x04\xec\x58",
.nout = 32
},
-#if 0
{
.path = "/crypto/pbkdf/nonrfc/sha512/iter1200",
.hash = QCRYPTO_HASH_ALG_SHA512,
@@ -280,6 +279,58 @@ static QCryptoPbkdfTestData test_data[] = {
.nout = 32
},
{
+ .path = "/crypto/pbkdf/nonrfc/sha224/iter1200",
+ .hash = QCRYPTO_HASH_ALG_SHA224,
+ .iterations = 1200,
+ .key = "XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX"
+ "XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX"
+ "XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX"
+ "XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX",
+ .nkey = 129,
+ .salt = "pass phrase exceeds block size",
+ .nsalt = 30,
+ .out = "\x13\x3b\x88\x0c\x0e\x52\xa2\x41"
+ "\x49\x33\x35\xa6\xc3\x83\xae\x23"
+ "\xf6\x77\x43\x9e\x5b\x30\x92\x3e"
+ "\x4a\x3a\xaa\x24\x69\x3c\xed\x20",
+ .nout = 32
+ },
+ {
+ .path = "/crypto/pbkdf/nonrfc/sha384/iter1200",
+ .hash = QCRYPTO_HASH_ALG_SHA384,
+ .iterations = 1200,
+ .key = "XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX"
+ "XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX"
+ "XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX"
+ "XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX",
+ .nkey = 129,
+ .salt = "pass phrase exceeds block size",
+ .nsalt = 30,
+ .out = "\xfe\xe3\xe1\x84\xc9\x25\x3e\x10"
+ "\x47\xc8\x7d\x53\xc6\xa5\xe3\x77"
+ "\x29\x41\x76\xbd\x4b\xe3\x9b\xac"
+ "\x05\x6c\x11\xdd\x17\xc5\x93\x80",
+ .nout = 32
+ },
+ {
+ .path = "/crypto/pbkdf/nonrfc/ripemd160/iter1200",
+ .hash = QCRYPTO_HASH_ALG_RIPEMD160,
+ .iterations = 1200,
+ .key = "XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX"
+ "XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX"
+ "XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX"
+ "XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX",
+ .nkey = 129,
+ .salt = "pass phrase exceeds block size",
+ .nsalt = 30,
+ .out = "\xd6\xcb\xd8\xa7\xdb\x0c\xa2\x2a"
+ "\x23\x5e\x47\xaf\xdb\xda\xa8\xef"
+ "\xe4\x01\x0d\x6f\xb5\x33\xc8\xbd"
+ "\xce\xbf\x91\x14\x8b\x5c\x48\x41",
+ .nout = 32
+ },
+#if 0
+ {
.path = "/crypto/pbkdf/nonrfc/whirlpool/iter1200",
.hash = QCRYPTO_HASH_ALG_WHIRLPOOL,
.iterations = 1200,
--
2.7.4
^ permalink raw reply related [flat|nested] 12+ messages in thread* [Qemu-devel] [PULL v2 8/8] crypto: add trace points for TLS cert verification
2016-09-19 15:33 [Qemu-devel] [PULL v2 0/8] Merge qcrypto 2016/09/19 Daniel P. Berrange
` (6 preceding siblings ...)
2016-09-19 15:33 ` [Qemu-devel] [PULL v2 7/8] crypto: support more hash algorithms for pbkdf Daniel P. Berrange
@ 2016-09-19 15:33 ` Daniel P. Berrange
2016-09-19 15:55 ` [Qemu-devel] [PULL v2 0/8] Merge qcrypto 2016/09/19 no-reply
` (2 subsequent siblings)
10 siblings, 0 replies; 12+ messages in thread
From: Daniel P. Berrange @ 2016-09-19 15:33 UTC (permalink / raw)
To: qemu-devel; +Cc: Peter Maydell, Daniel P. Berrange
It is very useful to know about TLS cert verification
status when debugging, so add a trace point for it.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
---
crypto/tlssession.c | 10 ++++++++--
crypto/trace-events | 1 +
2 files changed, 9 insertions(+), 2 deletions(-)
diff --git a/crypto/tlssession.c b/crypto/tlssession.c
index 2de42c6..96a02de 100644
--- a/crypto/tlssession.c
+++ b/crypto/tlssession.c
@@ -351,16 +351,22 @@ qcrypto_tls_session_check_credentials(QCryptoTLSSession *session,
{
if (object_dynamic_cast(OBJECT(session->creds),
TYPE_QCRYPTO_TLS_CREDS_ANON)) {
+ trace_qcrypto_tls_session_check_creds(session, "nop");
return 0;
} else if (object_dynamic_cast(OBJECT(session->creds),
TYPE_QCRYPTO_TLS_CREDS_X509)) {
if (session->creds->verifyPeer) {
- return qcrypto_tls_session_check_certificate(session,
- errp);
+ int ret = qcrypto_tls_session_check_certificate(session,
+ errp);
+ trace_qcrypto_tls_session_check_creds(session,
+ ret == 0 ? "pass" : "fail");
+ return ret;
} else {
+ trace_qcrypto_tls_session_check_creds(session, "skip");
return 0;
}
} else {
+ trace_qcrypto_tls_session_check_creds(session, "error");
error_setg(errp, "Unexpected credential type %s",
object_get_typename(OBJECT(session->creds)));
return -1;
diff --git a/crypto/trace-events b/crypto/trace-events
index 8181843..dc6ddd3 100644
--- a/crypto/trace-events
+++ b/crypto/trace-events
@@ -17,3 +17,4 @@ qcrypto_tls_creds_x509_load_cert_list(void *creds, const char *file) "TLS creds
# crypto/tlssession.c
qcrypto_tls_session_new(void *session, void *creds, const char *hostname, const char *aclname, int endpoint) "TLS session new session=%p creds=%p hostname=%s aclname=%s endpoint=%d"
+qcrypto_tls_session_check_creds(void *session, const char *status) "TLS session check creds session=%p status=%s"
--
2.7.4
^ permalink raw reply related [flat|nested] 12+ messages in thread* Re: [Qemu-devel] [PULL v2 0/8] Merge qcrypto 2016/09/19
2016-09-19 15:33 [Qemu-devel] [PULL v2 0/8] Merge qcrypto 2016/09/19 Daniel P. Berrange
` (7 preceding siblings ...)
2016-09-19 15:33 ` [Qemu-devel] [PULL v2 8/8] crypto: add trace points for TLS cert verification Daniel P. Berrange
@ 2016-09-19 15:55 ` no-reply
2016-09-19 17:06 ` Peter Maydell
2016-09-19 20:16 ` no-reply
10 siblings, 0 replies; 12+ messages in thread
From: no-reply @ 2016-09-19 15:55 UTC (permalink / raw)
To: berrange; +Cc: famz, qemu-devel, peter.maydell
Hi,
Your series seems to have some coding style problems. See output below for
more information:
Type: series
Subject: [Qemu-devel] [PULL v2 0/8] Merge qcrypto 2016/09/19
Message-id: 1474299237-1054-1-git-send-email-berrange@redhat.com
=== TEST SCRIPT BEGIN ===
#!/bin/bash
BASE=base
n=1
total=$(git log --oneline $BASE.. | wc -l)
failed=0
# Useful git options
git config --local diff.renamelimit 0
git config --local diff.renames True
commits="$(git log --format=%H --reverse $BASE..)"
for c in $commits; do
echo "Checking PATCH $n/$total: $(git show --no-patch --format=%s $c)..."
if ! git show $c --format=email | ./scripts/checkpatch.pl --mailback -; then
failed=1
echo
fi
n=$((n+1))
done
exit $failed
=== TEST SCRIPT END ===
Updating 3c8cf5a9c21ff8782164d1def7f44bd888713384
Switched to a new branch 'test'
e82628e crypto: add trace points for TLS cert verification
9d93d38 crypto: support more hash algorithms for pbkdf
08053a6 crypto: increase default pbkdf2 time for luks to 2 seconds
657e1cd crypto: remove bogus /= 2 for pbkdf iterations
d3206e1 crypto: use correct derived key size when timing pbkdf
435e4e2 crypto: clear out buffer after timing pbkdf algorithm
cce8751 crypto: make PBKDF iterations configurable for LUKS format
2f624b1 crypto: use uint64_t for pbkdf iteration count parameters
=== OUTPUT BEGIN ===
Checking PATCH 1/8: crypto: use uint64_t for pbkdf iteration count parameters...
Checking PATCH 2/8: crypto: make PBKDF iterations configurable for LUKS format...
Checking PATCH 3/8: crypto: clear out buffer after timing pbkdf algorithm...
Checking PATCH 4/8: crypto: use correct derived key size when timing pbkdf...
Checking PATCH 5/8: crypto: remove bogus /= 2 for pbkdf iterations...
Checking PATCH 6/8: crypto: increase default pbkdf2 time for luks to 2 seconds...
Checking PATCH 7/8: crypto: support more hash algorithms for pbkdf...
ERROR: if this code is redundant consider removing it
#222: FILE: tests/test-crypto-pbkdf.c:332:
+#if 0
total: 1 errors, 0 warnings, 194 lines checked
Your patch has style problems, please review. If any of these errors
are false positives report them to the maintainer, see
CHECKPATCH in MAINTAINERS.
Checking PATCH 8/8: crypto: add trace points for TLS cert verification...
=== OUTPUT END ===
Test command exited with code: 1
---
Email generated automatically by Patchew [http://patchew.org/].
Please send your feedback to patchew-devel@freelists.org
^ permalink raw reply [flat|nested] 12+ messages in thread* Re: [Qemu-devel] [PULL v2 0/8] Merge qcrypto 2016/09/19
2016-09-19 15:33 [Qemu-devel] [PULL v2 0/8] Merge qcrypto 2016/09/19 Daniel P. Berrange
` (8 preceding siblings ...)
2016-09-19 15:55 ` [Qemu-devel] [PULL v2 0/8] Merge qcrypto 2016/09/19 no-reply
@ 2016-09-19 17:06 ` Peter Maydell
2016-09-19 20:16 ` no-reply
10 siblings, 0 replies; 12+ messages in thread
From: Peter Maydell @ 2016-09-19 17:06 UTC (permalink / raw)
To: Daniel P. Berrange; +Cc: QEMU Developers
On 19 September 2016 at 16:33, Daniel P. Berrange <berrange@redhat.com> wrote:
> The following changes since commit 0f2fa73ba0ca19ebdaccf0d1785583d6601411b6:
>
> Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into staging (2016-09-19 11:23:20 +0100)
>
> are available in the git repository at:
>
> git://github.com/berrange/qemu tags/pull-qcrypto-2016-09-19-2
>
> for you to fetch changes up to b57482d7a0fe669aeb6f0c3c3503d143b9db89dd:
>
> crypto: add trace points for TLS cert verification (2016-09-19 16:30:46 +0100)
>
> ----------------------------------------------------------------
> Merge qcrypto 2016/09/19 v2
>
> ----------------------------------------------------------------
> Daniel P. Berrange (8):
> crypto: use uint64_t for pbkdf iteration count parameters
> crypto: make PBKDF iterations configurable for LUKS format
> crypto: clear out buffer after timing pbkdf algorithm
> crypto: use correct derived key size when timing pbkdf
> crypto: remove bogus /= 2 for pbkdf iterations
> crypto: increase default pbkdf2 time for luks to 2 seconds
> crypto: support more hash algorithms for pbkdf
> crypto: add trace points for TLS cert verification
>
Applied, thanks.
-- PMM
^ permalink raw reply [flat|nested] 12+ messages in thread* Re: [Qemu-devel] [PULL v2 0/8] Merge qcrypto 2016/09/19
2016-09-19 15:33 [Qemu-devel] [PULL v2 0/8] Merge qcrypto 2016/09/19 Daniel P. Berrange
` (9 preceding siblings ...)
2016-09-19 17:06 ` Peter Maydell
@ 2016-09-19 20:16 ` no-reply
10 siblings, 0 replies; 12+ messages in thread
From: no-reply @ 2016-09-19 20:16 UTC (permalink / raw)
To: berrange; +Cc: famz, qemu-devel, peter.maydell
Hi,
Your series failed automatic build test. Please find the testing commands and
their output below. If you have docker installed, you can probably reproduce it
locally.
Type: series
Subject: [Qemu-devel] [PULL v2 0/8] Merge qcrypto 2016/09/19
Message-id: 1474299237-1054-1-git-send-email-berrange@redhat.com
=== TEST SCRIPT BEGIN ===
#!/bin/bash
set -e
git submodule update --init dtc
make J=8 docker-test-quick@centos6
make J=8 docker-test-mingw@fedora
=== TEST SCRIPT END ===
Updating 3c8cf5a9c21ff8782164d1def7f44bd888713384
Switched to a new branch 'test'
e82628e crypto: add trace points for TLS cert verification
9d93d38 crypto: support more hash algorithms for pbkdf
08053a6 crypto: increase default pbkdf2 time for luks to 2 seconds
657e1cd crypto: remove bogus /= 2 for pbkdf iterations
d3206e1 crypto: use correct derived key size when timing pbkdf
435e4e2 crypto: clear out buffer after timing pbkdf algorithm
cce8751 crypto: make PBKDF iterations configurable for LUKS format
2f624b1 crypto: use uint64_t for pbkdf iteration count parameters
=== OUTPUT BEGIN ===
Submodule 'dtc' (git://git.qemu-project.org/dtc.git) registered for path 'dtc'
Cloning into 'dtc'...
Submodule path 'dtc': checked out '65cc4d2748a2c2e6f27f1cf39e07a5dbabd80ebf'
BUILD centos6
=== OUTPUT END ===
Abort: command timeout (>3600 seconds)
---
Email generated automatically by Patchew [http://patchew.org/].
Please send your feedback to patchew-devel@freelists.org
^ permalink raw reply [flat|nested] 12+ messages in thread