From: John Snow <jsnow@redhat.com>
To: qemu-block@nongnu.org
Cc: kwolf@redhat.com, qemu-stable@nongnu.org, qemu-devel@nongnu.org,
mreitz@redhat.com, John Snow <jsnow@redhat.com>
Subject: [Qemu-devel] [PATCH v5 3/3] block-backend: remove blk_flush_all
Date: Thu, 22 Sep 2016 21:45:52 -0400 [thread overview]
Message-ID: <1474595152-4383-4-git-send-email-jsnow@redhat.com> (raw)
In-Reply-To: <1474595152-4383-1-git-send-email-jsnow@redhat.com>
We can teach Xen to drain and flush each device as it needs to, instead
of trying to flush ALL devices. This removes the last user of
blk_flush_all.
The function is therefore removed under the premise that any new uses
of blk_flush_all would be the wrong paradigm: either flush the single
device that requires flushing, or use an appropriate flush_all mechanism
from outside of the BlkBackend layer.
Signed-off-by: John Snow <jsnow@redhat.com>
---
block/block-backend.c | 22 ----------------------
hw/i386/xen/xen_platform.c | 2 --
hw/ide/piix.c | 4 ++++
include/sysemu/block-backend.h | 1 -
4 files changed, 4 insertions(+), 25 deletions(-)
diff --git a/block/block-backend.c b/block/block-backend.c
index d1349d9..bfb1ddb 100644
--- a/block/block-backend.c
+++ b/block/block-backend.c
@@ -1621,28 +1621,6 @@ int blk_commit_all(void)
return 0;
}
-int blk_flush_all(void)
-{
- BlockBackend *blk = NULL;
- int result = 0;
-
- while ((blk = blk_all_next(blk)) != NULL) {
- AioContext *aio_context = blk_get_aio_context(blk);
- int ret;
-
- aio_context_acquire(aio_context);
- if (blk_is_inserted(blk)) {
- ret = blk_flush(blk);
- if (ret < 0 && !result) {
- result = ret;
- }
- }
- aio_context_release(aio_context);
- }
-
- return result;
-}
-
/* throttling disk I/O limits */
void blk_set_io_limits(BlockBackend *blk, ThrottleConfig *cfg)
diff --git a/hw/i386/xen/xen_platform.c b/hw/i386/xen/xen_platform.c
index aa78393..f85635c 100644
--- a/hw/i386/xen/xen_platform.c
+++ b/hw/i386/xen/xen_platform.c
@@ -134,8 +134,6 @@ static void platform_fixed_ioport_writew(void *opaque, uint32_t addr, uint32_t v
devices, and bit 2 the non-primary-master IDE devices. */
if (val & UNPLUG_ALL_IDE_DISKS) {
DPRINTF("unplug disks\n");
- blk_drain_all();
- blk_flush_all();
pci_unplug_disks(pci_dev->bus);
}
if (val & UNPLUG_ALL_NICS) {
diff --git a/hw/ide/piix.c b/hw/ide/piix.c
index c190fca..d5777fd 100644
--- a/hw/ide/piix.c
+++ b/hw/ide/piix.c
@@ -179,6 +179,10 @@ int pci_piix3_xen_ide_unplug(DeviceState *dev)
if (di != NULL && !di->media_cd) {
BlockBackend *blk = blk_by_legacy_dinfo(di);
DeviceState *ds = blk_get_attached_dev(blk);
+
+ blk_drain(blk);
+ blk_flush(blk);
+
if (ds) {
blk_detach_dev(blk, ds);
}
diff --git a/include/sysemu/block-backend.h b/include/sysemu/block-backend.h
index 4808a96..3d43592 100644
--- a/include/sysemu/block-backend.h
+++ b/include/sysemu/block-backend.h
@@ -150,7 +150,6 @@ BlockAIOCB *blk_aio_ioctl(BlockBackend *blk, unsigned long int req, void *buf,
int blk_co_pdiscard(BlockBackend *blk, int64_t offset, int count);
int blk_co_flush(BlockBackend *blk);
int blk_flush(BlockBackend *blk);
-int blk_flush_all(void);
int blk_commit_all(void);
void blk_drain(BlockBackend *blk);
void blk_drain_all(void);
--
2.7.4
next prev parent reply other threads:[~2016-09-23 1:46 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-09-23 1:45 [Qemu-devel] [PATCH v5 0/3] block: allow flush on devices with open tray John Snow
2016-09-23 1:45 ` [Qemu-devel] [PATCH v5 1/3] block: reintroduce bdrv_flush_all John Snow
2016-09-23 1:45 ` [Qemu-devel] [PATCH v5 2/3] qemu: use bdrv_flush_all for vm_stop et al John Snow
2016-09-23 1:45 ` John Snow [this message]
2016-09-23 4:11 ` [Qemu-devel] [PATCH v5 0/3] block: allow flush on devices with open tray Fam Zheng
2016-09-23 15:35 ` Max Reitz
2016-09-23 19:38 ` John Snow
2016-09-26 8:28 ` Kevin Wolf
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1474595152-4383-4-git-send-email-jsnow@redhat.com \
--to=jsnow@redhat.com \
--cc=kwolf@redhat.com \
--cc=mreitz@redhat.com \
--cc=qemu-block@nongnu.org \
--cc=qemu-devel@nongnu.org \
--cc=qemu-stable@nongnu.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).