From: Peter Maydell <peter.maydell@linaro.org>
To: qemu-arm@nongnu.org, qemu-devel@nongnu.org
Cc: patches@linaro.org, "Edgar E. Iglesias" <edgar.iglesias@gmail.com>
Subject: [Qemu-devel] [PATCH 2/3] target-arm: Add trace events for the generic timers
Date: Thu, 6 Oct 2016 14:21:06 +0100 [thread overview]
Message-ID: <1475760067-25756-3-git-send-email-peter.maydell@linaro.org> (raw)
In-Reply-To: <1475760067-25756-1-git-send-email-peter.maydell@linaro.org>
Add some useful trace events for the ARM generic timers (notably
the various register writes and the resulting IRQ line state).
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
Makefile.objs | 1 +
target-arm/helper.c | 20 ++++++++++++++++----
2 files changed, 17 insertions(+), 4 deletions(-)
diff --git a/Makefile.objs b/Makefile.objs
index 02fb8e7..69fdd48 100644
--- a/Makefile.objs
+++ b/Makefile.objs
@@ -155,6 +155,7 @@ trace-events-y += hw/alpha/trace-events
trace-events-y += ui/trace-events
trace-events-y += audio/trace-events
trace-events-y += net/trace-events
+trace-events-y += target-arm/trace-events
trace-events-y += target-i386/trace-events
trace-events-y += target-sparc/trace-events
trace-events-y += target-s390x/trace-events
diff --git a/target-arm/helper.c b/target-arm/helper.c
index 23792ab..5fcdc2b 100644
--- a/target-arm/helper.c
+++ b/target-arm/helper.c
@@ -1,4 +1,5 @@
#include "qemu/osdep.h"
+#include "trace.h"
#include "cpu.h"
#include "internals.h"
#include "exec/gdbstub.h"
@@ -1560,10 +1561,13 @@ static void gt_recalc_timer(ARMCPU *cpu, int timeridx)
/* Note that this must be unsigned 64 bit arithmetic: */
int istatus = count - offset >= gt->cval;
uint64_t nexttick;
+ int irqstate;
gt->ctl = deposit32(gt->ctl, 2, 1, istatus);
- qemu_set_irq(cpu->gt_timer_outputs[timeridx],
- (istatus && !(gt->ctl & 2)));
+
+ irqstate = (istatus && !(gt->ctl & 2));
+ qemu_set_irq(cpu->gt_timer_outputs[timeridx], irqstate);
+
if (istatus) {
/* Next transition is when count rolls back over to zero */
nexttick = UINT64_MAX;
@@ -1580,11 +1584,13 @@ static void gt_recalc_timer(ARMCPU *cpu, int timeridx)
nexttick = INT64_MAX / GTIMER_SCALE;
}
timer_mod(cpu->gt_timer[timeridx], nexttick);
+ trace_arm_gt_recalc(timeridx, irqstate, nexttick);
} else {
/* Timer disabled: ISTATUS and timer output always clear */
gt->ctl &= ~4;
qemu_set_irq(cpu->gt_timer_outputs[timeridx], 0);
timer_del(cpu->gt_timer[timeridx]);
+ trace_arm_gt_recalc_disabled(timeridx);
}
}
@@ -1610,6 +1616,7 @@ static void gt_cval_write(CPUARMState *env, const ARMCPRegInfo *ri,
int timeridx,
uint64_t value)
{
+ trace_arm_gt_cval_write(timeridx, value);
env->cp15.c14_timer[timeridx].cval = value;
gt_recalc_timer(arm_env_get_cpu(env), timeridx);
}
@@ -1629,6 +1636,7 @@ static void gt_tval_write(CPUARMState *env, const ARMCPRegInfo *ri,
{
uint64_t offset = timeridx == GTIMER_VIRT ? env->cp15.cntvoff_el2 : 0;
+ trace_arm_gt_tval_write(timeridx, value);
env->cp15.c14_timer[timeridx].cval = gt_get_countervalue(env) - offset +
sextract64(value, 0, 32);
gt_recalc_timer(arm_env_get_cpu(env), timeridx);
@@ -1641,6 +1649,7 @@ static void gt_ctl_write(CPUARMState *env, const ARMCPRegInfo *ri,
ARMCPU *cpu = arm_env_get_cpu(env);
uint32_t oldval = env->cp15.c14_timer[timeridx].ctl;
+ trace_arm_gt_ctl_write(timeridx, value);
env->cp15.c14_timer[timeridx].ctl = deposit64(oldval, 0, 2, value);
if ((oldval ^ value) & 1) {
/* Enable toggled */
@@ -1649,8 +1658,10 @@ static void gt_ctl_write(CPUARMState *env, const ARMCPRegInfo *ri,
/* IMASK toggled: don't need to recalculate,
* just set the interrupt line based on ISTATUS
*/
- qemu_set_irq(cpu->gt_timer_outputs[timeridx],
- (oldval & 4) && !(value & 2));
+ int irqstate = (oldval & 4) && !(value & 2);
+
+ trace_arm_gt_imask_toggle(timeridx, irqstate);
+ qemu_set_irq(cpu->gt_timer_outputs[timeridx], irqstate);
}
}
@@ -1715,6 +1726,7 @@ static void gt_cntvoff_write(CPUARMState *env, const ARMCPRegInfo *ri,
{
ARMCPU *cpu = arm_env_get_cpu(env);
+ trace_arm_gt_cntvoff_write(value);
raw_write(env, ri, value);
gt_recalc_timer(cpu, GTIMER_VIRT);
}
--
2.7.4
next prev parent reply other threads:[~2016-10-06 13:21 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-10-06 13:21 [Qemu-devel] [PATCH 0/3] preliminaries for GICv3 virt support Peter Maydell
2016-10-06 13:21 ` [Qemu-devel] [PATCH 1/3] target-arm: Implement dummy MDCCINT_EL1 Peter Maydell
2016-10-06 16:55 ` Edgar E. Iglesias
2016-10-06 13:21 ` Peter Maydell [this message]
2016-10-06 16:55 ` [Qemu-devel] [PATCH 2/3] target-arm: Add trace events for the generic timers Edgar E. Iglesias
2016-10-06 13:21 ` [Qemu-devel] [PATCH 3/3] hw/intc/arm_gicv3: Fix ICC register tracepoints Peter Maydell
2016-10-06 16:59 ` [Qemu-devel] [PATCH 0/3] preliminaries for GICv3 virt support Edgar E. Iglesias
2016-10-06 17:48 ` Peter Maydell
2016-10-06 17:59 ` Peter Maydell
2016-10-11 9:15 ` no-reply
2016-10-11 9:19 ` Peter Maydell
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1475760067-25756-3-git-send-email-peter.maydell@linaro.org \
--to=peter.maydell@linaro.org \
--cc=edgar.iglesias@gmail.com \
--cc=patches@linaro.org \
--cc=qemu-arm@nongnu.org \
--cc=qemu-devel@nongnu.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).