From: Igor Mammedov <imammedo@redhat.com>
To: qemu-devel@nongnu.org
Cc: kraxel@redhat.com, ehabkost@redhat.com, liuxiaojian6@huawei.com,
mst@redhat.com, rkrcmar@redhat.com, peterx@redhat.com,
kevin@koconnor.net, pbonzini@redhat.com, lersek@redhat.com,
chao.gao@intel.com
Subject: [Qemu-devel] [PATCH v3 12/13] pc: add 'etc/boot-cpus' fw_cfg file for machine with more than 255 CPUs
Date: Thu, 13 Oct 2016 11:52:46 +0200 [thread overview]
Message-ID: <1476352367-69400-13-git-send-email-imammedo@redhat.com> (raw)
In-Reply-To: <1476352367-69400-1-git-send-email-imammedo@redhat.com>
Currently firmware uses 1 byte at 0x5F offset in RTC CMOS
to get number of CPUs present at boot. However 1 byte is
not enough to handle more than 255 CPUs. So add a new
fw_cfg file that would allow QEMU to tell it.
For compat reasons add file only for machine types that
support more than 255 CPUs.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
---
v3:
* make boot_cpus to PCMachineState so it could be kept uptodate
when a cpu is added/removed and BIOS would read current value
on system reset
---
include/hw/i386/pc.h | 2 ++
hw/i386/pc.c | 36 +++++++++++++++++++++---------------
2 files changed, 23 insertions(+), 15 deletions(-)
diff --git a/include/hw/i386/pc.h b/include/hw/i386/pc.h
index b16c448..17fff80 100644
--- a/include/hw/i386/pc.h
+++ b/include/hw/i386/pc.h
@@ -37,6 +37,7 @@
/**
* PCMachineState:
* @acpi_dev: link to ACPI PM device that performs ACPI hotplug handling
+ * @boot_cpus_le: number of present VCPUs, referenced by 'etc/boot-cpus' fw_cfg
*/
struct PCMachineState {
/*< private >*/
@@ -69,6 +70,7 @@ struct PCMachineState {
bool apic_xrupt_override;
unsigned apic_id_limit;
CPUArchIdList *possible_cpus;
+ uint16_t boot_cpus_le;
/* NUMA information: */
uint64_t numa_nodes;
diff --git a/hw/i386/pc.c b/hw/i386/pc.c
index f807932..40eb43b 100644
--- a/hw/i386/pc.c
+++ b/hw/i386/pc.c
@@ -1084,17 +1084,6 @@ void pc_acpi_smi_interrupt(void *opaque, int irq, int level)
}
}
-static int pc_present_cpus_count(PCMachineState *pcms)
-{
- int i, boot_cpus = 0;
- for (i = 0; i < pcms->possible_cpus->len; i++) {
- if (pcms->possible_cpus->cpus[i].cpu) {
- boot_cpus++;
- }
- }
- return boot_cpus;
-}
-
static X86CPU *pc_new_cpu(const char *typename, int64_t apic_id,
Error **errp)
{
@@ -1231,6 +1220,11 @@ static void pc_build_feature_control_file(PCMachineState *pcms)
fw_cfg_add_file(pcms->fw_cfg, "etc/msr_feature_control", val, sizeof(*val));
}
+static void rtc_set_cpus_count(ISADevice *rtc, uint16_t cpus_count)
+{
+ rtc_set_memory(rtc, 0x5f, cpus_count - 1);
+}
+
static
void pc_machine_done(Notifier *notifier, void *data)
{
@@ -1239,7 +1233,7 @@ void pc_machine_done(Notifier *notifier, void *data)
PCIBus *bus = pcms->bus;
/* set the number of CPUs */
- rtc_set_memory(pcms->rtc, 0x5f, pc_present_cpus_count(pcms) - 1);
+ rtc_set_cpus_count(pcms->rtc, le16_to_cpu(pcms->boot_cpus_le));
if (bus) {
int extra_hosts = 0;
@@ -1260,8 +1254,15 @@ void pc_machine_done(Notifier *notifier, void *data)
acpi_setup();
if (pcms->fw_cfg) {
+ MachineClass *mc = MACHINE_GET_CLASS(pcms);
+
pc_build_smbios(pcms->fw_cfg);
pc_build_feature_control_file(pcms);
+
+ if (mc->max_cpus > 255) {
+ fw_cfg_add_file(pcms->fw_cfg, "etc/boot-cpus", &pcms->boot_cpus_le,
+ sizeof(pcms->boot_cpus_le));
+ }
}
}
@@ -1785,9 +1786,11 @@ static void pc_cpu_plug(HotplugHandler *hotplug_dev,
}
}
+ /* increment the number of CPUs */
+ pcms->boot_cpus_le = cpu_to_le16(le16_to_cpu(pcms->boot_cpus_le) + 1);
if (dev->hotplugged) {
- /* increment the number of CPUs */
- rtc_set_memory(pcms->rtc, 0x5f, rtc_get_memory(pcms->rtc, 0x5f) + 1);
+ /* Update the number of CPUs in CMOS */
+ rtc_set_cpus_count(pcms->rtc, le16_to_cpu(pcms->boot_cpus_le));
}
found_cpu = pc_find_cpu_slot(pcms, CPU(dev), NULL);
@@ -1841,7 +1844,10 @@ static void pc_cpu_unplug_cb(HotplugHandler *hotplug_dev,
found_cpu->cpu = NULL;
object_unparent(OBJECT(dev));
- rtc_set_memory(pcms->rtc, 0x5f, rtc_get_memory(pcms->rtc, 0x5f) - 1);
+ /* decrement the number of CPUs */
+ pcms->boot_cpus_le = cpu_to_le16(le16_to_cpu(pcms->boot_cpus_le) - 1);
+ /* Update the number of CPUs in CMOS */
+ rtc_set_cpus_count(pcms->rtc, le16_to_cpu(pcms->boot_cpus_le));
out:
error_propagate(errp, local_err);
}
--
2.7.4
next prev parent reply other threads:[~2016-10-13 9:53 UTC|newest]
Thread overview: 68+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-10-13 9:52 [Qemu-devel] [PATCH v3 00/13] pc: q35: x2APIC support in kvm_apic mode Igor Mammedov
2016-10-13 9:52 ` [Qemu-devel] [PATCH v3 01/13] pc: acpi: x2APIC support for MADT table Igor Mammedov
2016-10-18 12:47 ` Eduardo Habkost
2016-10-18 13:00 ` Igor Mammedov
2016-10-18 13:05 ` Eduardo Habkost
2016-10-18 13:42 ` Igor Mammedov
2016-10-13 9:52 ` [Qemu-devel] [PATCH v3 02/13] pc: acpi: x2APIC support for SRAT table Igor Mammedov
2016-10-18 13:07 ` Eduardo Habkost
2016-10-18 13:47 ` Igor Mammedov
2016-10-13 9:52 ` [Qemu-devel] [PATCH v3 03/13] acpi: cphp: support x2APIC entry in cpu._MAT Igor Mammedov
2016-10-18 13:34 ` Eduardo Habkost
2016-10-18 13:46 ` Igor Mammedov
2016-10-18 13:47 ` Eduardo Habkost
2016-10-18 14:02 ` Igor Mammedov
2016-10-13 9:52 ` [Qemu-devel] [PATCH v3 04/13] acpi: cphp: force switch to modern cpu hotplug if APIC ID > 254 Igor Mammedov
2016-10-18 13:38 ` Eduardo Habkost
2016-10-18 14:34 ` Igor Mammedov
2016-10-18 15:05 ` Eduardo Habkost
2016-10-18 15:23 ` Igor Mammedov
2016-10-18 16:37 ` Eduardo Habkost
2016-10-19 10:35 ` Igor Mammedov
2016-10-13 9:52 ` [Qemu-devel] [PATCH v3 05/13] pc: leave max apic_id_limit only in legacy cpu hotplug code Igor Mammedov
2016-10-17 21:44 ` Eduardo Habkost
2016-10-18 9:02 ` Igor Mammedov
2016-10-18 10:31 ` Eduardo Habkost
2016-10-18 11:37 ` [Qemu-devel] [PATCH v4 " Igor Mammedov
2016-10-18 12:01 ` Eduardo Habkost
2016-10-18 9:12 ` [Qemu-devel] [PATCH v3 " Igor Mammedov
2016-10-18 10:39 ` Eduardo Habkost
2016-10-18 12:10 ` Igor Mammedov
2016-10-13 9:52 ` [Qemu-devel] [PATCH v3 06/13] pc: apic_common: extend APIC ID property to 32bit Igor Mammedov
2016-10-18 10:56 ` Eduardo Habkost
2016-10-18 12:36 ` Igor Mammedov
2016-10-18 12:59 ` Eduardo Habkost
2016-10-18 14:01 ` Igor Mammedov
2016-10-18 14:14 ` Eduardo Habkost
2016-10-18 14:38 ` Igor Mammedov
2016-10-13 9:52 ` [Qemu-devel] [PATCH v3 07/13] pc: apic_common: restore APIC ID to initial ID on reset Igor Mammedov
2016-10-13 9:52 ` [Qemu-devel] [PATCH v3 08/13] pc: apic_common: reset APIC ID to initial ID when switching into x2APIC mode Igor Mammedov
2016-10-13 14:11 ` Radim Krčmář
2016-10-13 9:52 ` [Qemu-devel] [PATCH v3 09/13] pc: kvm_apic: pass APIC ID depending on xAPIC/x2APIC mode Igor Mammedov
2016-10-13 14:08 ` Radim Krčmář
2016-10-14 11:21 ` [Qemu-devel] [PATCH v4 " Igor Mammedov
2016-10-17 12:35 ` Radim Krčmář
2016-10-18 14:56 ` Eduardo Habkost
2016-10-18 16:26 ` Radim Krčmář
2016-10-18 18:04 ` Eduardo Habkost
2016-10-17 21:51 ` [Qemu-devel] [PATCH v3 " Eduardo Habkost
2016-10-18 7:17 ` Igor Mammedov
2016-10-18 10:40 ` Eduardo Habkost
2016-10-13 9:52 ` [Qemu-devel] [PATCH v3 10/13] pc: clarify FW_CFG_MAX_CPUS usage comment Igor Mammedov
2016-10-13 9:52 ` [Qemu-devel] [PATCH v3 11/13] increase MAX_CPUMASK_BITS from 255 to 288 Igor Mammedov
2016-10-13 13:01 ` Andrew Jones
2016-10-13 9:52 ` Igor Mammedov [this message]
2016-10-13 9:52 ` [Qemu-devel] [PATCH v3 13/13] pc: require IRQ remapping and EIM if there could be x2APIC CPUs Igor Mammedov
2016-10-13 13:56 ` Radim Krčmář
2016-10-14 11:25 ` [Qemu-devel] [PATCH v4 " Igor Mammedov
2016-10-18 11:27 ` Eduardo Habkost
2016-10-18 12:44 ` Igor Mammedov
2016-10-18 12:55 ` Eduardo Habkost
2016-10-18 14:39 ` Igor Mammedov
2016-10-13 10:01 ` [Qemu-devel] [PATCH v3 00/13] pc: q35: x2APIC support in kvm_apic mode Paolo Bonzini
2016-10-13 10:15 ` Igor Mammedov
2016-10-13 10:28 ` Gerd Hoffmann
2016-10-13 13:24 ` [Qemu-devel] [PATCH v3 14/13] pc: q35: bump max_cpus to 288 Igor Mammedov
2016-10-13 13:53 ` Radim Krčmář
2016-10-14 4:05 ` [Qemu-devel] [PATCH v3 00/13] pc: q35: x2APIC support in kvm_apic mode no-reply
2016-10-14 7:59 ` Igor Mammedov
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1476352367-69400-13-git-send-email-imammedo@redhat.com \
--to=imammedo@redhat.com \
--cc=chao.gao@intel.com \
--cc=ehabkost@redhat.com \
--cc=kevin@koconnor.net \
--cc=kraxel@redhat.com \
--cc=lersek@redhat.com \
--cc=liuxiaojian6@huawei.com \
--cc=mst@redhat.com \
--cc=pbonzini@redhat.com \
--cc=peterx@redhat.com \
--cc=qemu-devel@nongnu.org \
--cc=rkrcmar@redhat.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).