From: David Gibson <david@gibson.dropbear.id.au>
To: pbonzini@redhat.com, qemu-devel@nongnu.org
Cc: qemu-ppc@nongnu.org, lvivier@redhat.com, agraf@suse.de,
stefanha@redhat.com, mst@redhat.com, aik@ozlabs.ru,
mdroth@linux.vnet.ibm.com, groug@kaod.org, thuth@redhat.com,
David Gibson <david@gibson.dropbear.id.au>
Subject: [Qemu-devel] [PATCH 5/8] libqos: Add streaming accessors for PCI MMIO
Date: Tue, 18 Oct 2016 21:52:10 +1100 [thread overview]
Message-ID: <1476787933-7180-6-git-send-email-david@gibson.dropbear.id.au> (raw)
In-Reply-To: <1476787933-7180-1-git-send-email-david@gibson.dropbear.id.au>
Currently PCI memory (aka MMIO) space is accessed via a set of readb/writeb
style accessors. This is what we want for accessing discrete registers of
a certain size. However, there are a few cases where we instead need a
"bag of bytes" style streaming interface to PCI MMIO space. This can be
either for streaming data style registers or when there's actual memory
rather than registers in PCI space, for example frame buffers or ivshmem.
This patch adds backend callbacks, and libqos wrappers for this type of
byte address order preserving accesses.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
---
tests/libqos/pci-pc.c | 14 ++++++++++++++
tests/libqos/pci-spapr.c | 17 +++++++++++++++++
tests/libqos/pci.c | 16 ++++++++++++++++
tests/libqos/pci.h | 6 ++++++
4 files changed, 53 insertions(+)
diff --git a/tests/libqos/pci-pc.c b/tests/libqos/pci-pc.c
index b087d13..0e95772 100644
--- a/tests/libqos/pci-pc.c
+++ b/tests/libqos/pci-pc.c
@@ -95,6 +95,17 @@ static void qpci_pc_mmio_writel(QPCIBus *bus, uint32_t addr, uint32_t val)
writel(addr, val);
}
+static void qpci_pc_memread(QPCIBus *bus, uint32_t addr, void *buf, size_t len)
+{
+ memread(addr, buf, len);
+}
+
+static void qpci_pc_memwrite(QPCIBus *bus, uint32_t addr,
+ const void *buf, size_t len)
+{
+ memwrite(addr, buf, len);
+}
+
static uint8_t qpci_pc_config_readb(QPCIBus *bus, int devfn, uint8_t offset)
{
outl(0xcf8, (1U << 31) | (devfn << 8) | offset);
@@ -153,6 +164,9 @@ QPCIBus *qpci_init_pc(QGuestAllocator *alloc)
ret->bus.mmio_writew = qpci_pc_mmio_writew;
ret->bus.mmio_writel = qpci_pc_mmio_writel;
+ ret->bus.memread = qpci_pc_memread;
+ ret->bus.memwrite = qpci_pc_memwrite;
+
ret->bus.config_readb = qpci_pc_config_readb;
ret->bus.config_readw = qpci_pc_config_readw;
ret->bus.config_readl = qpci_pc_config_readl;
diff --git a/tests/libqos/pci-spapr.c b/tests/libqos/pci-spapr.c
index 9a18d8a..b4c4b81 100644
--- a/tests/libqos/pci-spapr.c
+++ b/tests/libqos/pci-spapr.c
@@ -122,6 +122,20 @@ static void qpci_spapr_mmio32_writel(QPCIBus *bus, uint32_t addr, uint32_t val)
writel(s->mmio32_cpu_base + addr, bswap32(val));
}
+static void qpci_spapr_memread(QPCIBus *bus, uint32_t addr,
+ void *buf, size_t len)
+{
+ QPCIBusSPAPR *s = container_of(bus, QPCIBusSPAPR, bus);
+ memread(s->mmio32_cpu_base + addr, buf, len);
+}
+
+static void qpci_spapr_memwrite(QPCIBus *bus, uint32_t addr,
+ const void *buf, size_t len)
+{
+ QPCIBusSPAPR *s = container_of(bus, QPCIBusSPAPR, bus);
+ memwrite(s->mmio32_cpu_base + addr, buf, len);
+}
+
static uint8_t qpci_spapr_config_readb(QPCIBus *bus, int devfn, uint8_t offset)
{
QPCIBusSPAPR *s = container_of(bus, QPCIBusSPAPR, bus);
@@ -196,6 +210,9 @@ QPCIBus *qpci_init_spapr(QGuestAllocator *alloc)
ret->bus.mmio_writew = qpci_spapr_mmio32_writew;
ret->bus.mmio_writel = qpci_spapr_mmio32_writel;
+ ret->bus.memread = qpci_spapr_memread;
+ ret->bus.memwrite = qpci_spapr_memwrite;
+
ret->bus.config_readb = qpci_spapr_config_readb;
ret->bus.config_readw = qpci_spapr_config_readw;
ret->bus.config_readl = qpci_spapr_config_readl;
diff --git a/tests/libqos/pci.c b/tests/libqos/pci.c
index bf1c532..1e242f9 100644
--- a/tests/libqos/pci.c
+++ b/tests/libqos/pci.c
@@ -289,6 +289,22 @@ void qpci_io_writel(QPCIDevice *dev, void *data, uint32_t value)
}
}
+void qpci_memread(QPCIDevice *dev, void *data, void *buf, size_t len)
+{
+ uintptr_t addr = (uintptr_t)data;
+
+ g_assert(addr >= QPCI_PIO_LIMIT);
+ dev->bus->memread(dev->bus, addr, buf, len);
+}
+
+void qpci_memwrite(QPCIDevice *dev, void *data, const void *buf, size_t len)
+{
+ uintptr_t addr = (uintptr_t)data;
+
+ g_assert(addr >= QPCI_PIO_LIMIT);
+ dev->bus->memwrite(dev->bus, addr, buf, len);
+}
+
void *qpci_iomap(QPCIDevice *dev, int barno, uint64_t *sizeptr)
{
QPCIBus *bus = dev->bus;
diff --git a/tests/libqos/pci.h b/tests/libqos/pci.h
index f6f916d..2fa5b4f 100644
--- a/tests/libqos/pci.h
+++ b/tests/libqos/pci.h
@@ -39,6 +39,9 @@ struct QPCIBus {
void (*mmio_writew)(QPCIBus *bus, uint32_t addr, uint16_t value);
void (*mmio_writel)(QPCIBus *bus, uint32_t addr, uint32_t value);
+ void (*memread)(QPCIBus *bus, uint32_t addr, void *buf, size_t len);
+ void (*memwrite)(QPCIBus *bus, uint32_t addr, const void *buf, size_t len);
+
uint8_t (*config_readb)(QPCIBus *bus, int devfn, uint8_t offset);
uint16_t (*config_readw)(QPCIBus *bus, int devfn, uint8_t offset);
uint32_t (*config_readl)(QPCIBus *bus, int devfn, uint8_t offset);
@@ -92,6 +95,9 @@ void qpci_io_writeb(QPCIDevice *dev, void *data, uint8_t value);
void qpci_io_writew(QPCIDevice *dev, void *data, uint16_t value);
void qpci_io_writel(QPCIDevice *dev, void *data, uint32_t value);
+void qpci_memread(QPCIDevice *bus, void *data, void *buf, size_t len);
+void qpci_memwrite(QPCIDevice *bus, void *data, const void *buf, size_t len);
+
void *qpci_iomap(QPCIDevice *dev, int barno, uint64_t *sizeptr);
void qpci_iounmap(QPCIDevice *dev, void *data);
--
2.7.4
next prev parent reply other threads:[~2016-10-18 10:52 UTC|newest]
Thread overview: 28+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-10-18 10:52 [Qemu-devel] [PATCH 0/8] Cleanups to qtest PCI handling David Gibson
2016-10-18 10:52 ` [Qemu-devel] [PATCH 1/8] libqos: Give qvirtio_config_read*() consistent semantics David Gibson
2016-10-18 12:41 ` Laurent Vivier
2016-10-18 13:27 ` Greg Kurz
2016-10-19 2:41 ` David Gibson
2016-10-18 10:52 ` [Qemu-devel] [PATCH 2/8] libqos: Handle PCI IO de-multiplexing in common code David Gibson
2016-10-18 13:28 ` Laurent Vivier
2016-10-19 2:59 ` David Gibson
2016-10-18 10:52 ` [Qemu-devel] [PATCH 3/8] libqos: Move BAR assignment to " David Gibson
2016-10-18 15:00 ` Laurent Vivier
2016-10-19 3:07 ` David Gibson
2016-10-18 10:52 ` [Qemu-devel] [PATCH 4/8] tests: Better handle legacy IO addresses in tco-test David Gibson
2016-10-18 15:14 ` Laurent Vivier
2016-10-18 16:28 ` Laurent Vivier
2016-10-19 3:19 ` David Gibson
2016-10-19 3:09 ` David Gibson
2016-10-18 10:52 ` David Gibson [this message]
2016-10-18 15:17 ` [Qemu-devel] [PATCH 5/8] libqos: Add streaming accessors for PCI MMIO Laurent Vivier
2016-10-18 10:52 ` [Qemu-devel] [PATCH 6/8] libqos: Implement mmio accessors in terms of mem{read, write} David Gibson
2016-10-18 16:04 ` Laurent Vivier
2016-10-18 10:52 ` [Qemu-devel] [PATCH 7/8] tests: Use qpci_mem{read, write} in ivshmem-test David Gibson
2016-10-18 16:14 ` Laurent Vivier
2016-10-19 4:13 ` David Gibson
2016-10-18 10:52 ` [Qemu-devel] [PATCH 8/8] libqos: Change PCI accessors to take opaque BAR handle David Gibson
2016-10-18 16:48 ` Laurent Vivier
2016-10-19 4:06 ` David Gibson
2016-10-18 11:56 ` [Qemu-devel] [PATCH 0/8] Cleanups to qtest PCI handling Laurent Vivier
2016-10-19 1:11 ` David Gibson
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1476787933-7180-6-git-send-email-david@gibson.dropbear.id.au \
--to=david@gibson.dropbear.id.au \
--cc=agraf@suse.de \
--cc=aik@ozlabs.ru \
--cc=groug@kaod.org \
--cc=lvivier@redhat.com \
--cc=mdroth@linux.vnet.ibm.com \
--cc=mst@redhat.com \
--cc=pbonzini@redhat.com \
--cc=qemu-devel@nongnu.org \
--cc=qemu-ppc@nongnu.org \
--cc=stefanha@redhat.com \
--cc=thuth@redhat.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).