[Qemu-devel] [PATCH] hw/arm/pxa2xx: Set value default values for CCCR and CKEN on PXA255

[Guenter Roeck <linux@roeck-us.net>]

The code used default values for PXA270 to configure CCCR. For PXA255,
the resulting register value is invalid (unsupported) and resulted
in a division by zero in the Linux kernel. Use default values from
datasheet instead.

Signed-off-by: Guenter Roeck <linux@roeck-us.net>
---
 hw/arm/pxa2xx.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/hw/arm/pxa2xx.c b/hw/arm/pxa2xx.c
index 2a2a821..4d9aed4 100644
--- a/hw/arm/pxa2xx.c
+++ b/hw/arm/pxa2xx.c
@@ -2274,7 +2274,9 @@ PXA2xxState *pxa255_init(MemoryRegion *address_space, unsigned int sdram_size)
                     qdev_get_gpio_in(s->pic, PXA2XX_PIC_LCD));
 
     s->cm_base = 0x41300000;
-    s->cm_regs[CCCR >> 2] = 0x02000210;	/* 416.0 MHz */
+    s->cm_regs[CCCR >> 2] = 0x00000121;	/* from datasheet */
+    s->cm_regs[CKEN >> 2] = 0x00017def;	/* from datasheet */
+
     s->clkcfg = 0x00000009;		/* Turbo mode active */
     memory_region_init_io(&s->cm_iomem, NULL, &pxa2xx_cm_ops, s, "pxa2xx-cm", 0x1000);
     memory_region_add_subregion(address_space, s->cm_base, &s->cm_iomem);
-- 
2.5.0