From: John Snow <jsnow@redhat.com>
To: qemu-devel@nongnu.org
Cc: peter.maydell@linaro.org, jsnow@redhat.com,
Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Subject: [Qemu-devel] [PULL 1/6] dma-helpers: explicitly pass alignment into DMA helpers
Date: Thu, 27 Oct 2016 17:18:43 -0400 [thread overview]
Message-ID: <1477603128-1265-2-git-send-email-jsnow@redhat.com> (raw)
In-Reply-To: <1477603128-1265-1-git-send-email-jsnow@redhat.com>
From: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
The hard-coded default alignment is BDRV_SECTOR_SIZE, however this is not
necessarily the case for all platforms. Use this as the default alignment for
all current callers.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Eric Blake <eblake@redhat.com>
Acked-by: John Snow <jsnow@redhat.com>
Message-id: 1476445266-27503-2-git-send-email-mark.cave-ayland@ilande.co.uk
Signed-off-by: John Snow <jsnow@redhat.com>
---
dma-helpers.c | 21 ++++++++++++---------
hw/block/nvme.c | 6 ++++--
hw/ide/ahci.c | 2 ++
hw/ide/core.c | 6 +++---
hw/scsi/scsi-disk.c | 2 ++
include/sysemu/dma.h | 6 +++---
6 files changed, 26 insertions(+), 17 deletions(-)
diff --git a/dma-helpers.c b/dma-helpers.c
index 9defc10..6f9d47c 100644
--- a/dma-helpers.c
+++ b/dma-helpers.c
@@ -73,6 +73,7 @@ typedef struct {
AioContext *ctx;
BlockAIOCB *acb;
QEMUSGList *sg;
+ uint32_t align;
uint64_t offset;
DMADirection dir;
int sg_cur_index;
@@ -160,8 +161,9 @@ static void dma_blk_cb(void *opaque, int ret)
return;
}
- if (dbs->iov.size & ~BDRV_SECTOR_MASK) {
- qemu_iovec_discard_back(&dbs->iov, dbs->iov.size & ~BDRV_SECTOR_MASK);
+ if (!QEMU_IS_ALIGNED(dbs->iov.size, dbs->align)) {
+ qemu_iovec_discard_back(&dbs->iov,
+ QEMU_ALIGN_DOWN(dbs->iov.size, dbs->align));
}
dbs->acb = dbs->io_func(dbs->offset, &dbs->iov,
@@ -199,7 +201,7 @@ static const AIOCBInfo dma_aiocb_info = {
};
BlockAIOCB *dma_blk_io(AioContext *ctx,
- QEMUSGList *sg, uint64_t offset,
+ QEMUSGList *sg, uint64_t offset, uint32_t align,
DMAIOFunc *io_func, void *io_func_opaque,
BlockCompletionFunc *cb,
void *opaque, DMADirection dir)
@@ -212,6 +214,7 @@ BlockAIOCB *dma_blk_io(AioContext *ctx,
dbs->sg = sg;
dbs->ctx = ctx;
dbs->offset = offset;
+ dbs->align = align;
dbs->sg_cur_index = 0;
dbs->sg_cur_byte = 0;
dbs->dir = dir;
@@ -234,11 +237,11 @@ BlockAIOCB *dma_blk_read_io_func(int64_t offset, QEMUIOVector *iov,
}
BlockAIOCB *dma_blk_read(BlockBackend *blk,
- QEMUSGList *sg, uint64_t offset,
+ QEMUSGList *sg, uint64_t offset, uint32_t align,
void (*cb)(void *opaque, int ret), void *opaque)
{
- return dma_blk_io(blk_get_aio_context(blk),
- sg, offset, dma_blk_read_io_func, blk, cb, opaque,
+ return dma_blk_io(blk_get_aio_context(blk), sg, offset, align,
+ dma_blk_read_io_func, blk, cb, opaque,
DMA_DIRECTION_FROM_DEVICE);
}
@@ -252,11 +255,11 @@ BlockAIOCB *dma_blk_write_io_func(int64_t offset, QEMUIOVector *iov,
}
BlockAIOCB *dma_blk_write(BlockBackend *blk,
- QEMUSGList *sg, uint64_t offset,
+ QEMUSGList *sg, uint64_t offset, uint32_t align,
void (*cb)(void *opaque, int ret), void *opaque)
{
- return dma_blk_io(blk_get_aio_context(blk),
- sg, offset, dma_blk_write_io_func, blk, cb, opaque,
+ return dma_blk_io(blk_get_aio_context(blk), sg, offset, align,
+ dma_blk_write_io_func, blk, cb, opaque,
DMA_DIRECTION_TO_DEVICE);
}
diff --git a/hw/block/nvme.c b/hw/block/nvme.c
index cef3bb4..b380142 100644
--- a/hw/block/nvme.c
+++ b/hw/block/nvme.c
@@ -258,8 +258,10 @@ static uint16_t nvme_rw(NvmeCtrl *n, NvmeNamespace *ns, NvmeCmd *cmd,
req->has_sg = true;
dma_acct_start(n->conf.blk, &req->acct, &req->qsg, acct);
req->aiocb = is_write ?
- dma_blk_write(n->conf.blk, &req->qsg, data_offset, nvme_rw_cb, req) :
- dma_blk_read(n->conf.blk, &req->qsg, data_offset, nvme_rw_cb, req);
+ dma_blk_write(n->conf.blk, &req->qsg, data_offset, BDRV_SECTOR_SIZE,
+ nvme_rw_cb, req) :
+ dma_blk_read(n->conf.blk, &req->qsg, data_offset, BDRV_SECTOR_SIZE,
+ nvme_rw_cb, req);
return NVME_NO_COMPLETE;
}
diff --git a/hw/ide/ahci.c b/hw/ide/ahci.c
index 63ead21..3c19bda 100644
--- a/hw/ide/ahci.c
+++ b/hw/ide/ahci.c
@@ -1009,6 +1009,7 @@ static void execute_ncq_command(NCQTransferState *ncq_tfs)
&ncq_tfs->sglist, BLOCK_ACCT_READ);
ncq_tfs->aiocb = dma_blk_read(ide_state->blk, &ncq_tfs->sglist,
ncq_tfs->lba << BDRV_SECTOR_BITS,
+ BDRV_SECTOR_SIZE,
ncq_cb, ncq_tfs);
break;
case WRITE_FPDMA_QUEUED:
@@ -1022,6 +1023,7 @@ static void execute_ncq_command(NCQTransferState *ncq_tfs)
&ncq_tfs->sglist, BLOCK_ACCT_WRITE);
ncq_tfs->aiocb = dma_blk_write(ide_state->blk, &ncq_tfs->sglist,
ncq_tfs->lba << BDRV_SECTOR_BITS,
+ BDRV_SECTOR_SIZE,
ncq_cb, ncq_tfs);
break;
default:
diff --git a/hw/ide/core.c b/hw/ide/core.c
index 7291677..43709e5 100644
--- a/hw/ide/core.c
+++ b/hw/ide/core.c
@@ -882,15 +882,15 @@ static void ide_dma_cb(void *opaque, int ret)
switch (s->dma_cmd) {
case IDE_DMA_READ:
s->bus->dma->aiocb = dma_blk_read(s->blk, &s->sg, offset,
- ide_dma_cb, s);
+ BDRV_SECTOR_SIZE, ide_dma_cb, s);
break;
case IDE_DMA_WRITE:
s->bus->dma->aiocb = dma_blk_write(s->blk, &s->sg, offset,
- ide_dma_cb, s);
+ BDRV_SECTOR_SIZE, ide_dma_cb, s);
break;
case IDE_DMA_TRIM:
s->bus->dma->aiocb = dma_blk_io(blk_get_aio_context(s->blk),
- &s->sg, offset,
+ &s->sg, offset, BDRV_SECTOR_SIZE,
ide_issue_trim, s->blk, ide_dma_cb, s,
DMA_DIRECTION_TO_DEVICE);
break;
diff --git a/hw/scsi/scsi-disk.c b/hw/scsi/scsi-disk.c
index 88beaf4..a963191 100644
--- a/hw/scsi/scsi-disk.c
+++ b/hw/scsi/scsi-disk.c
@@ -341,6 +341,7 @@ static void scsi_do_read(SCSIDiskReq *r, int ret)
r->req.resid -= r->req.sg->size;
r->req.aiocb = dma_blk_io(blk_get_aio_context(s->qdev.conf.blk),
r->req.sg, r->sector << BDRV_SECTOR_BITS,
+ BDRV_SECTOR_SIZE,
sdc->dma_readv, r, scsi_dma_complete, r,
DMA_DIRECTION_FROM_DEVICE);
} else {
@@ -539,6 +540,7 @@ static void scsi_write_data(SCSIRequest *req)
r->req.resid -= r->req.sg->size;
r->req.aiocb = dma_blk_io(blk_get_aio_context(s->qdev.conf.blk),
r->req.sg, r->sector << BDRV_SECTOR_BITS,
+ BDRV_SECTOR_SIZE,
sdc->dma_writev, r, scsi_dma_complete, r,
DMA_DIRECTION_TO_DEVICE);
} else {
diff --git a/include/sysemu/dma.h b/include/sysemu/dma.h
index 34c8eaf..c228c66 100644
--- a/include/sysemu/dma.h
+++ b/include/sysemu/dma.h
@@ -199,14 +199,14 @@ typedef BlockAIOCB *DMAIOFunc(int64_t offset, QEMUIOVector *iov,
void *opaque);
BlockAIOCB *dma_blk_io(AioContext *ctx,
- QEMUSGList *sg, uint64_t offset,
+ QEMUSGList *sg, uint64_t offset, uint32_t align,
DMAIOFunc *io_func, void *io_func_opaque,
BlockCompletionFunc *cb, void *opaque, DMADirection dir);
BlockAIOCB *dma_blk_read(BlockBackend *blk,
- QEMUSGList *sg, uint64_t offset,
+ QEMUSGList *sg, uint64_t offset, uint32_t align,
BlockCompletionFunc *cb, void *opaque);
BlockAIOCB *dma_blk_write(BlockBackend *blk,
- QEMUSGList *sg, uint64_t offset,
+ QEMUSGList *sg, uint64_t offset, uint32_t align,
BlockCompletionFunc *cb, void *opaque);
uint64_t dma_buf_read(uint8_t *ptr, int32_t len, QEMUSGList *sg);
uint64_t dma_buf_write(uint8_t *ptr, int32_t len, QEMUSGList *sg);
--
2.7.4
next prev parent reply other threads:[~2016-10-27 21:18 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-10-27 21:18 [Qemu-devel] [PULL 0/6] Ide patches John Snow
2016-10-27 21:18 ` John Snow [this message]
2016-10-27 21:18 ` [Qemu-devel] [PULL 2/6] macio: switch over to new byte-aligned DMA helpers John Snow
2016-10-27 21:18 ` [Qemu-devel] [PULL 3/6] fdc: Add a floppy qbus John Snow
2016-10-27 21:18 ` [Qemu-devel] [PULL 4/6] fdc: Add a floppy drive qdev John Snow
2016-10-27 21:18 ` [Qemu-devel] [PULL 5/6] fdc: Move qdev properties to FloppyDrive John Snow
2016-10-27 21:18 ` [Qemu-devel] [PULL 6/6] qemu-iotests: Test creating floppy drives John Snow
2016-10-28 14:30 ` [Qemu-devel] [PULL 0/6] Ide patches Peter Maydell
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1477603128-1265-2-git-send-email-jsnow@redhat.com \
--to=jsnow@redhat.com \
--cc=mark.cave-ayland@ilande.co.uk \
--cc=peter.maydell@linaro.org \
--cc=qemu-devel@nongnu.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).