qemu-devel.nongnu.org archive mirror
 help / color / mirror / Atom feed
From: Paolo Bonzini <pbonzini@redhat.com>
To: qemu-devel@nongnu.org
Subject: [Qemu-devel] [PULL 10/27] nbd: Treat flags vs. command type as separate fields
Date: Mon, 31 Oct 2016 15:37:26 +0100	[thread overview]
Message-ID: <1477924663-30950-11-git-send-email-pbonzini@redhat.com> (raw)
In-Reply-To: <1477924663-30950-1-git-send-email-pbonzini@redhat.com>

From: Eric Blake <eblake@redhat.com>

Current upstream NBD documents that requests have a 16-bit flags,
followed by a 16-bit type integer; although older versions mentioned
only a 32-bit field with masking to find flags.  Since the protocol
is in network order (big-endian over the wire), the ABI is unchanged;
but dealing with the flags as a separate field rather than masking
will make it easier to add support for upcoming NBD extensions that
increase the number of both flags and commands.

Improve some comments in nbd.h based on the current upstream
NBD protocol (https://github.com/yoe/nbd/blob/master/doc/proto.md),
and touch some nearby code to keep checkpatch.pl happy.

Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <1476469998-28592-3-git-send-email-eblake@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
---
 block/nbd-client.c  |  9 +++------
 include/block/nbd.h | 18 ++++++++++++------
 nbd/client.c        |  9 ++++++---
 nbd/nbd-internal.h  |  4 ++--
 nbd/server.c        | 39 +++++++++++++++++++--------------------
 5 files changed, 42 insertions(+), 37 deletions(-)

diff --git a/block/nbd-client.c b/block/nbd-client.c
index 40b28ab..8ca5030 100644
--- a/block/nbd-client.c
+++ b/block/nbd-client.c
@@ -1,6 +1,7 @@
 /*
  * QEMU Block driver for  NBD
  *
+ * Copyright (C) 2016 Red Hat, Inc.
  * Copyright (C) 2008 Bull S.A.S.
  *     Author: Laurent Vivier <Laurent.Vivier@bull.net>
  *
@@ -258,7 +259,7 @@ int nbd_client_co_pwritev(BlockDriverState *bs, uint64_t offset,
 
     if (flags & BDRV_REQ_FUA) {
         assert(client->nbdflags & NBD_FLAG_SEND_FUA);
-        request.type |= NBD_CMD_FLAG_FUA;
+        request.flags |= NBD_CMD_FLAG_FUA;
     }
 
     assert(bytes <= NBD_MAX_BUFFER_SIZE);
@@ -343,11 +344,7 @@ void nbd_client_attach_aio_context(BlockDriverState *bs,
 void nbd_client_close(BlockDriverState *bs)
 {
     NbdClientSession *client = nbd_get_client_session(bs);
-    struct nbd_request request = {
-        .type = NBD_CMD_DISC,
-        .from = 0,
-        .len = 0
-    };
+    struct nbd_request request = { .type = NBD_CMD_DISC };
 
     if (client->ioc == NULL) {
         return;
diff --git a/include/block/nbd.h b/include/block/nbd.h
index fd58390..5fe2670 100644
--- a/include/block/nbd.h
+++ b/include/block/nbd.h
@@ -1,4 +1,5 @@
 /*
+ *  Copyright (C) 2016 Red Hat, Inc.
  *  Copyright (C) 2005  Anthony Liguori <anthony@codemonkey.ws>
  *
  *  Network Block Device
@@ -32,7 +33,8 @@ struct nbd_request {
     uint64_t handle;
     uint64_t from;
     uint32_t len;
-    uint32_t type;
+    uint16_t flags;
+    uint16_t type;
 };
 
 struct nbd_reply {
@@ -40,6 +42,8 @@ struct nbd_reply {
     uint32_t error;
 };
 
+/* Transmission (export) flags: sent from server to client during handshake,
+   but describe what will happen during transmission */
 #define NBD_FLAG_HAS_FLAGS      (1 << 0)        /* Flags are there */
 #define NBD_FLAG_READ_ONLY      (1 << 1)        /* Device is read-only */
 #define NBD_FLAG_SEND_FLUSH     (1 << 2)        /* Send FLUSH */
@@ -47,10 +51,12 @@ struct nbd_reply {
 #define NBD_FLAG_ROTATIONAL     (1 << 4)        /* Use elevator algorithm - rotational media */
 #define NBD_FLAG_SEND_TRIM      (1 << 5)        /* Send TRIM (discard) */
 
-/* New-style global flags. */
+/* New-style handshake (global) flags, sent from server to client, and
+   control what will happen during handshake phase. */
 #define NBD_FLAG_FIXED_NEWSTYLE     (1 << 0)    /* Fixed newstyle protocol. */
 
-/* New-style client flags. */
+/* New-style client flags, sent from client to server to control what happens
+   during handshake phase. */
 #define NBD_FLAG_C_FIXED_NEWSTYLE   (1 << 0)    /* Fixed newstyle protocol. */
 
 /* Reply types. */
@@ -61,10 +67,10 @@ struct nbd_reply {
 #define NBD_REP_ERR_INVALID     ((UINT32_C(1) << 31) | 3) /* Invalid length. */
 #define NBD_REP_ERR_TLS_REQD    ((UINT32_C(1) << 31) | 5) /* TLS required */
 
+/* Request flags, sent from client to server during transmission phase */
+#define NBD_CMD_FLAG_FUA        (1 << 0)
 
-#define NBD_CMD_MASK_COMMAND	0x0000ffff
-#define NBD_CMD_FLAG_FUA	(1 << 16)
-
+/* Supported request types */
 enum {
     NBD_CMD_READ = 0,
     NBD_CMD_WRITE = 1,
diff --git a/nbd/client.c b/nbd/client.c
index f6db836..4620e8d 100644
--- a/nbd/client.c
+++ b/nbd/client.c
@@ -1,4 +1,5 @@
 /*
+ *  Copyright (C) 2016 Red Hat, Inc.
  *  Copyright (C) 2005  Anthony Liguori <anthony@codemonkey.ws>
  *
  *  Network Block Device Client Side
@@ -714,11 +715,13 @@ ssize_t nbd_send_request(QIOChannel *ioc, struct nbd_request *request)
 
     TRACE("Sending request to server: "
           "{ .from = %" PRIu64", .len = %" PRIu32 ", .handle = %" PRIu64
-          ", .type=%" PRIu32 " }",
-          request->from, request->len, request->handle, request->type);
+          ", .flags = %" PRIx16 ", .type = %" PRIu16 " }",
+          request->from, request->len, request->handle,
+          request->flags, request->type);
 
     stl_be_p(buf, NBD_REQUEST_MAGIC);
-    stl_be_p(buf + 4, request->type);
+    stw_be_p(buf + 4, request->flags);
+    stw_be_p(buf + 6, request->type);
     stq_be_p(buf + 8, request->handle);
     stq_be_p(buf + 16, request->from);
     stl_be_p(buf + 24, request->len);
diff --git a/nbd/nbd-internal.h b/nbd/nbd-internal.h
index 7e78064..99e5157 100644
--- a/nbd/nbd-internal.h
+++ b/nbd/nbd-internal.h
@@ -53,10 +53,10 @@
 /* This is all part of the "official" NBD API.
  *
  * The most up-to-date documentation is available at:
- * https://github.com/yoe/nbd/blob/master/doc/proto.txt
+ * https://github.com/yoe/nbd/blob/master/doc/proto.md
  */
 
-#define NBD_REQUEST_SIZE        (4 + 4 + 8 + 8 + 4)
+#define NBD_REQUEST_SIZE        (4 + 2 + 2 + 8 + 8 + 4)
 #define NBD_REPLY_SIZE          (4 + 4 + 8)
 #define NBD_REQUEST_MAGIC       0x25609513
 #define NBD_REPLY_MAGIC         0x67446698
diff --git a/nbd/server.c b/nbd/server.c
index ac42391..38a0fef 100644
--- a/nbd/server.c
+++ b/nbd/server.c
@@ -1,4 +1,5 @@
 /*
+ *  Copyright (C) 2016 Red Hat, Inc.
  *  Copyright (C) 2005  Anthony Liguori <anthony@codemonkey.ws>
  *
  *  Network Block Device Server Side
@@ -652,21 +653,23 @@ static ssize_t nbd_receive_request(QIOChannel *ioc, struct nbd_request *request)
 
     /* Request
        [ 0 ..  3]   magic   (NBD_REQUEST_MAGIC)
-       [ 4 ..  7]   type    (0 == READ, 1 == WRITE)
+       [ 4 ..  5]   flags   (NBD_CMD_FLAG_FUA, ...)
+       [ 6 ..  7]   type    (NBD_CMD_READ, ...)
        [ 8 .. 15]   handle
        [16 .. 23]   from
        [24 .. 27]   len
      */
 
     magic = ldl_be_p(buf);
-    request->type   = ldl_be_p(buf + 4);
+    request->flags  = lduw_be_p(buf + 4);
+    request->type   = lduw_be_p(buf + 6);
     request->handle = ldq_be_p(buf + 8);
     request->from   = ldq_be_p(buf + 16);
     request->len    = ldl_be_p(buf + 24);
 
-    TRACE("Got request: { magic = 0x%" PRIx32 ", .type = %" PRIx32
-          ", from = %" PRIu64 " , len = %" PRIu32 " }",
-          magic, request->type, request->from, request->len);
+    TRACE("Got request: { magic = 0x%" PRIx32 ", .flags = %" PRIx16
+          ", .type = %" PRIx16 ", from = %" PRIu64 ", len = %" PRIu32 " }",
+          magic, request->flags, request->type, request->from, request->len);
 
     if (magic != NBD_REQUEST_MAGIC) {
         LOG("invalid magic (got 0x%" PRIx32 ")", magic);
@@ -1013,7 +1016,6 @@ static ssize_t nbd_co_receive_request(NBDRequest *req,
                                       struct nbd_request *request)
 {
     NBDClient *client = req->client;
-    uint32_t command;
     ssize_t rc;
 
     g_assert(qemu_in_coroutine());
@@ -1030,13 +1032,12 @@ static ssize_t nbd_co_receive_request(NBDRequest *req,
 
     TRACE("Decoding type");
 
-    command = request->type & NBD_CMD_MASK_COMMAND;
-    if (command != NBD_CMD_WRITE) {
+    if (request->type != NBD_CMD_WRITE) {
         /* No payload, we are ready to read the next request.  */
         req->complete = true;
     }
 
-    if (command == NBD_CMD_DISC) {
+    if (request->type == NBD_CMD_DISC) {
         /* Special case: we're going to disconnect without a reply,
          * whether or not flags, from, or len are bogus */
         TRACE("Request type is DISCONNECT");
@@ -1053,7 +1054,7 @@ static ssize_t nbd_co_receive_request(NBDRequest *req,
         goto out;
     }
 
-    if (command == NBD_CMD_READ || command == NBD_CMD_WRITE) {
+    if (request->type == NBD_CMD_READ || request->type == NBD_CMD_WRITE) {
         if (request->len > NBD_MAX_BUFFER_SIZE) {
             LOG("len (%" PRIu32" ) is larger than max len (%u)",
                 request->len, NBD_MAX_BUFFER_SIZE);
@@ -1067,7 +1068,7 @@ static ssize_t nbd_co_receive_request(NBDRequest *req,
             goto out;
         }
     }
-    if (command == NBD_CMD_WRITE) {
+    if (request->type == NBD_CMD_WRITE) {
         TRACE("Reading %" PRIu32 " byte(s)", request->len);
 
         if (read_sync(client->ioc, req->data, request->len) != request->len) {
@@ -1083,12 +1084,11 @@ static ssize_t nbd_co_receive_request(NBDRequest *req,
         LOG("operation past EOF; From: %" PRIu64 ", Len: %" PRIu32
             ", Size: %" PRIu64, request->from, request->len,
             (uint64_t)client->exp->size);
-        rc = command == NBD_CMD_WRITE ? -ENOSPC : -EINVAL;
+        rc = request->type == NBD_CMD_WRITE ? -ENOSPC : -EINVAL;
         goto out;
     }
-    if (request->type & ~NBD_CMD_MASK_COMMAND & ~NBD_CMD_FLAG_FUA) {
-        LOG("unsupported flags (got 0x%x)",
-            request->type & ~NBD_CMD_MASK_COMMAND);
+    if (request->flags & ~NBD_CMD_FLAG_FUA) {
+        LOG("unsupported flags (got 0x%x)", request->flags);
         rc = -EINVAL;
         goto out;
     }
@@ -1110,7 +1110,6 @@ static void nbd_trip(void *opaque)
     struct nbd_request request;
     struct nbd_reply reply;
     ssize_t ret;
-    uint32_t command;
     int flags;
 
     TRACE("Reading request.");
@@ -1134,7 +1133,6 @@ static void nbd_trip(void *opaque)
         reply.error = -ret;
         goto error_reply;
     }
-    command = request.type & NBD_CMD_MASK_COMMAND;
 
     if (client->closing) {
         /*
@@ -1144,11 +1142,12 @@ static void nbd_trip(void *opaque)
         goto done;
     }
 
-    switch (command) {
+    switch (request.type) {
     case NBD_CMD_READ:
         TRACE("Request type is READ");
 
-        if (request.type & NBD_CMD_FLAG_FUA) {
+        /* XXX: NBD Protocol only documents use of FUA with WRITE */
+        if (request.flags & NBD_CMD_FLAG_FUA) {
             ret = blk_co_flush(exp->blk);
             if (ret < 0) {
                 LOG("flush failed");
@@ -1181,7 +1180,7 @@ static void nbd_trip(void *opaque)
         TRACE("Writing to device");
 
         flags = 0;
-        if (request.type & NBD_CMD_FLAG_FUA) {
+        if (request.flags & NBD_CMD_FLAG_FUA) {
             flags |= BDRV_REQ_FUA;
         }
         ret = blk_pwrite(exp->blk, request.from + exp->dev_offset,
-- 
2.7.4

  parent reply	other threads:[~2016-10-31 14:38 UTC|newest]

Thread overview: 40+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2016-10-31 14:37 [Qemu-devel] [PULL 00/27] Misc patches for 2016-10-31 Paolo Bonzini
2016-10-31 14:37 ` [Qemu-devel] [PULL 01/27] checkpatch: tweak "struct should normally be const" warning Paolo Bonzini
2016-10-31 14:37 ` [Qemu-devel] [PULL 02/27] nbd: Use CoQueue for free_sema instead of CoMutex Paolo Bonzini
2016-10-31 14:37 ` [Qemu-devel] [PULL 03/27] qemu-error: remove dependency of stubs on monitor Paolo Bonzini
2016-10-31 14:37 ` [Qemu-devel] [PULL 04/27] tests: send error_report to test log Paolo Bonzini
2016-10-31 14:37 ` [Qemu-devel] [PULL 05/27] exec.c: ensure all AddressSpaceDispatch updates under RCU Paolo Bonzini
2016-10-31 14:37 ` [Qemu-devel] [PULL 06/27] exec.c: do not truncate non-empty memory backend file Paolo Bonzini
2016-10-31 14:37 ` [Qemu-devel] [PULL 07/27] exec.c: check memory backend file size with 'size' option Paolo Bonzini
2016-10-31 14:37 ` [Qemu-devel] [PULL 08/27] hostmem-file: make option 'size' optional Paolo Bonzini
2016-10-31 18:20   ` Eduardo Habkost
2016-10-31 19:47     ` Paolo Bonzini
2016-10-31 22:22       ` Eduardo Habkost
2016-11-01  9:32         ` Haozhong Zhang
2016-11-01 14:16           ` Eduardo Habkost
2016-11-02  1:27             ` Haozhong Zhang
2016-10-31 14:37 ` [Qemu-devel] [PULL 09/27] nbd: Add qemu-nbd -D for human-readable description Paolo Bonzini
2016-10-31 14:37 ` Paolo Bonzini [this message]
2016-10-31 14:37 ` [Qemu-devel] [PULL 11/27] nbd: Rename NBDRequest to NBDRequestData Paolo Bonzini
2016-10-31 14:37 ` [Qemu-devel] [PULL 12/27] nbd: Rename NbdClientSession to NBDClientSession Paolo Bonzini
2016-10-31 14:37 ` [Qemu-devel] [PULL 13/27] nbd: Rename struct nbd_request and nbd_reply Paolo Bonzini
2016-10-31 14:37 ` [Qemu-devel] [PULL 14/27] nbd: Share common reply-sending code in server Paolo Bonzini
2016-10-31 14:37 ` [Qemu-devel] [PULL 15/27] nbd: Send message along with server NBD_REP_ERR errors Paolo Bonzini
2016-10-31 14:37 ` [Qemu-devel] [PULL 16/27] nbd: Share common option-sending code in client Paolo Bonzini
2016-10-31 14:37 ` [Qemu-devel] [PULL 17/27] nbd: Let server know when client gives up negotiation Paolo Bonzini
2016-10-31 14:37 ` [Qemu-devel] [PULL 18/27] nbd: Let client skip portions of server reply Paolo Bonzini
2016-10-31 14:37 ` [Qemu-devel] [PULL 19/27] nbd: Less allocation during NBD_OPT_LIST Paolo Bonzini
2016-10-31 14:37 ` [Qemu-devel] [PULL 20/27] nbd: Support shorter handshake Paolo Bonzini
2016-10-31 14:37 ` [Qemu-devel] [PULL 21/27] nbd: Refactor conversion to errno to silence checkpatch Paolo Bonzini
2016-10-31 14:37 ` [Qemu-devel] [PULL 22/27] nbd: Improve server handling of shutdown requests Paolo Bonzini
2016-10-31 18:05   ` Eric Blake
2016-10-31 14:37 ` [Qemu-devel] [PULL 23/27] nbd: Implement NBD_CMD_WRITE_ZEROES on server Paolo Bonzini
2016-10-31 14:37 ` [Qemu-devel] [PULL 24/27] nbd: Implement NBD_CMD_WRITE_ZEROES on client Paolo Bonzini
2016-11-15 22:59   ` Eric Blake
2016-10-31 14:37 ` [Qemu-devel] [PULL 25/27] qemu-char: do not forward events through the mux until QEMU has started Paolo Bonzini
2016-10-31 14:37 ` [Qemu-devel] [PULL 26/27] slirp: fix CharDriver breakage Paolo Bonzini
2016-10-31 14:37 ` [Qemu-devel] [PULL 27/27] x86: add AVX512_4VNNIW and AVX512_4FMAPS features Paolo Bonzini
2016-10-31 16:21 ` [Qemu-devel] [PULL 00/27] Misc patches for 2016-10-31 Peter Maydell
2016-10-31 17:18   ` Alex Bennée
2016-10-31 17:20     ` Peter Maydell
2016-10-31 17:57       ` Paolo Bonzini

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1477924663-30950-11-git-send-email-pbonzini@redhat.com \
    --to=pbonzini@redhat.com \
    --cc=qemu-devel@nongnu.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).