From: "Michael S. Tsirkin" <mst@redhat.com>
To: qemu-devel@nongnu.org
Cc: Peter Maydell <peter.maydell@linaro.org>,
Paolo Bonzini <pbonzini@redhat.com>,
Stefan Hajnoczi <stefanha@redhat.com>,
Farhan Ali <alifm@linux.vnet.ibm.com>,
Alex Williamson <alex.williamson@redhat.com>
Subject: [Qemu-devel] [PULL 3/7] virtio: access ISR atomically
Date: Fri, 18 Nov 2016 17:53:33 +0200 [thread overview]
Message-ID: <1479484366-7977-4-git-send-email-mst@redhat.com> (raw)
In-Reply-To: <1479484366-7977-1-git-send-email-mst@redhat.com>
From: Paolo Bonzini <pbonzini@redhat.com>
This will be needed once dataplane will be able to set it outside
the big QEMU lock.
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Tested-by: Farhan Ali <alifm@linux.vnet.ibm.com>
Tested-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
---
hw/virtio/virtio-mmio.c | 6 +++---
hw/virtio/virtio-pci.c | 9 +++------
hw/virtio/virtio.c | 22 +++++++++++++++++-----
3 files changed, 23 insertions(+), 14 deletions(-)
diff --git a/hw/virtio/virtio-mmio.c b/hw/virtio/virtio-mmio.c
index a30270f..17412cb 100644
--- a/hw/virtio/virtio-mmio.c
+++ b/hw/virtio/virtio-mmio.c
@@ -191,7 +191,7 @@ static uint64_t virtio_mmio_read(void *opaque, hwaddr offset, unsigned size)
return virtio_queue_get_addr(vdev, vdev->queue_sel)
>> proxy->guest_page_shift;
case VIRTIO_MMIO_INTERRUPTSTATUS:
- return vdev->isr;
+ return atomic_read(&vdev->isr);
case VIRTIO_MMIO_STATUS:
return vdev->status;
case VIRTIO_MMIO_HOSTFEATURESSEL:
@@ -299,7 +299,7 @@ static void virtio_mmio_write(void *opaque, hwaddr offset, uint64_t value,
}
break;
case VIRTIO_MMIO_INTERRUPTACK:
- vdev->isr &= ~value;
+ atomic_and(&vdev->isr, ~value);
virtio_update_irq(vdev);
break;
case VIRTIO_MMIO_STATUS:
@@ -347,7 +347,7 @@ static void virtio_mmio_update_irq(DeviceState *opaque, uint16_t vector)
if (!vdev) {
return;
}
- level = (vdev->isr != 0);
+ level = (atomic_read(&vdev->isr) != 0);
DPRINTF("virtio_mmio setting IRQ %d\n", level);
qemu_set_irq(proxy->irq, level);
}
diff --git a/hw/virtio/virtio-pci.c b/hw/virtio/virtio-pci.c
index 97b32fe..521ba0b 100644
--- a/hw/virtio/virtio-pci.c
+++ b/hw/virtio/virtio-pci.c
@@ -73,7 +73,7 @@ static void virtio_pci_notify(DeviceState *d, uint16_t vector)
msix_notify(&proxy->pci_dev, vector);
else {
VirtIODevice *vdev = virtio_bus_get_device(&proxy->bus);
- pci_set_irq(&proxy->pci_dev, vdev->isr & 1);
+ pci_set_irq(&proxy->pci_dev, atomic_read(&vdev->isr) & 1);
}
}
@@ -449,8 +449,7 @@ static uint32_t virtio_ioport_read(VirtIOPCIProxy *proxy, uint32_t addr)
break;
case VIRTIO_PCI_ISR:
/* reading from the ISR also clears it. */
- ret = vdev->isr;
- vdev->isr = 0;
+ ret = atomic_xchg(&vdev->isr, 0);
pci_irq_deassert(&proxy->pci_dev);
break;
case VIRTIO_MSI_CONFIG_VECTOR:
@@ -1379,9 +1378,7 @@ static uint64_t virtio_pci_isr_read(void *opaque, hwaddr addr,
{
VirtIOPCIProxy *proxy = opaque;
VirtIODevice *vdev = virtio_bus_get_device(&proxy->bus);
- uint64_t val = vdev->isr;
-
- vdev->isr = 0;
+ uint64_t val = atomic_xchg(&vdev->isr, 0);
pci_irq_deassert(&proxy->pci_dev);
return val;
diff --git a/hw/virtio/virtio.c b/hw/virtio/virtio.c
index b7d5828..138a414 100644
--- a/hw/virtio/virtio.c
+++ b/hw/virtio/virtio.c
@@ -945,7 +945,7 @@ void virtio_reset(void *opaque)
vdev->guest_features = 0;
vdev->queue_sel = 0;
vdev->status = 0;
- vdev->isr = 0;
+ atomic_set(&vdev->isr, 0);
vdev->config_vector = VIRTIO_NO_VECTOR;
virtio_notify_vector(vdev, vdev->config_vector);
@@ -1318,10 +1318,22 @@ void virtio_del_queue(VirtIODevice *vdev, int n)
vdev->vq[n].vring.num_default = 0;
}
+static void virtio_set_isr(VirtIODevice *vdev, int value)
+{
+ uint8_t old = atomic_read(&vdev->isr);
+
+ /* Do not write ISR if it does not change, so that its cacheline remains
+ * shared in the common case where the guest does not read it.
+ */
+ if ((old & value) != value) {
+ atomic_or(&vdev->isr, value);
+ }
+}
+
void virtio_irq(VirtQueue *vq)
{
trace_virtio_irq(vq);
- vq->vdev->isr |= 0x01;
+ virtio_set_isr(vq->vdev, 0x1);
virtio_notify_vector(vq->vdev, vq->vector);
}
@@ -1355,7 +1367,7 @@ void virtio_notify(VirtIODevice *vdev, VirtQueue *vq)
}
trace_virtio_notify(vdev, vq);
- vdev->isr |= 0x01;
+ virtio_set_isr(vq->vdev, 0x1);
virtio_notify_vector(vdev, vq->vector);
}
@@ -1364,7 +1376,7 @@ void virtio_notify_config(VirtIODevice *vdev)
if (!(vdev->status & VIRTIO_CONFIG_S_DRIVER_OK))
return;
- vdev->isr |= 0x03;
+ virtio_set_isr(vdev, 0x3);
vdev->generation++;
virtio_notify_vector(vdev, vdev->config_vector);
}
@@ -1895,7 +1907,7 @@ void virtio_init(VirtIODevice *vdev, const char *name,
vdev->device_id = device_id;
vdev->status = 0;
- vdev->isr = 0;
+ atomic_set(&vdev->isr, 0);
vdev->queue_sel = 0;
vdev->config_vector = VIRTIO_NO_VECTOR;
vdev->vq = g_malloc0(sizeof(VirtQueue) * VIRTIO_QUEUE_MAX);
--
MST
next prev parent reply other threads:[~2016-11-18 15:53 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-11-18 15:53 [Qemu-devel] [PULL 0/7] virtio, vhost, pc: fixes Michael S. Tsirkin
2016-11-18 15:53 ` [Qemu-devel] [PULL 1/7] virtio-crypto: fix virtio_queue_set_notification() race Michael S. Tsirkin
2016-11-18 15:53 ` [Qemu-devel] [PULL 2/7] virtio: introduce grab/release_ioeventfd to fix vhost Michael S. Tsirkin
2016-11-18 15:53 ` Michael S. Tsirkin [this message]
2016-11-18 15:53 ` [Qemu-devel] [PULL 4/7] virtio: set ISR on dataplane notifications Michael S. Tsirkin
2016-11-18 15:53 ` [Qemu-devel] [PULL 5/7] ivshmem: Fix 64 bit memory bar configuration Michael S. Tsirkin
2016-11-18 15:53 ` [Qemu-devel] [PULL 6/7] ipmi: fix qemu crash while migrating with ipmi Michael S. Tsirkin
2016-11-18 15:54 ` [Qemu-devel] [PULL 7/7] acpi: Use apic_id_limit when calculating legacy ACPI table size Michael S. Tsirkin
2016-11-21 11:10 ` [Qemu-devel] [PULL 0/7] virtio, vhost, pc: fixes Stefan Hajnoczi
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1479484366-7977-4-git-send-email-mst@redhat.com \
--to=mst@redhat.com \
--cc=alex.williamson@redhat.com \
--cc=alifm@linux.vnet.ibm.com \
--cc=pbonzini@redhat.com \
--cc=peter.maydell@linaro.org \
--cc=qemu-devel@nongnu.org \
--cc=stefanha@redhat.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).