qemu-devel.nongnu.org archive mirror
 help / color / mirror / Atom feed
From: Igor Mammedov <imammedo@redhat.com>
To: qemu-devel@nongnu.org
Cc: "Michael S. Tsirkin" <mst@redhat.com>,
	Eduardo Habkost <ehabkost@redhat.com>,
	Marcel Apfelbaum <marcel@redhat.com>
Subject: [Qemu-devel] [PATCH for-2.9 07/10] memhp: move GPE handler_E03 into build_memory_hotplug_aml()
Date: Tue,  6 Dec 2016 00:32:26 +0100	[thread overview]
Message-ID: <1480980749-182204-8-git-send-email-imammedo@redhat.com> (raw)
In-Reply-To: <1480980749-182204-1-git-send-email-imammedo@redhat.com>

>From this patch all the memory hotplug related AML
bits are consolidated in one place within DSTD.
Follow up patches will utilize that to simplify
memory hotplug related C/AML code.

Signed-off-by: Igor Mammedov <imammedo@redhat.com>
---
 include/hw/acpi/memory_hotplug.h |  6 +++---
 hw/acpi/memory_hotplug.c         | 42 ++++++++++++++++++++++++++--------------
 hw/i386/acpi-build.c             |  7 ++-----
 3 files changed, 32 insertions(+), 23 deletions(-)

diff --git a/include/hw/acpi/memory_hotplug.h b/include/hw/acpi/memory_hotplug.h
index 6dc48d2..37e2706 100644
--- a/include/hw/acpi/memory_hotplug.h
+++ b/include/hw/acpi/memory_hotplug.h
@@ -49,9 +49,9 @@ void acpi_memory_ospm_status(MemHotplugState *mem_st, ACPIOSTInfoList ***list);
 
 #define MEMORY_HOTPLUG_DEVICE        "MHPD"
 #define MEMORY_SLOT_SCAN_METHOD      "MSCN"
-#define MEMORY_HOTPLUG_HANDLER_PATH "\\_SB.PCI0." \
-     MEMORY_HOTPLUG_DEVICE "." MEMORY_SLOT_SCAN_METHOD
 
 void build_memory_hotplug_aml(Aml *table, uint32_t nr_mem,
-                              uint16_t io_base, uint16_t io_len);
+                              uint16_t io_base, uint16_t io_len,
+                              const char *res_root,
+                              const char *event_handler_method);
 #endif
diff --git a/hw/acpi/memory_hotplug.c b/hw/acpi/memory_hotplug.c
index 18b95f2..49e856f 100644
--- a/hw/acpi/memory_hotplug.c
+++ b/hw/acpi/memory_hotplug.c
@@ -308,18 +308,19 @@ const VMStateDescription vmstate_memory_hotplug = {
 };
 
 void build_memory_hotplug_aml(Aml *table, uint32_t nr_mem,
-                              uint16_t io_base, uint16_t io_len)
+                              uint16_t io_base, uint16_t io_len,
+                              const char *res_root,
+                              const char *event_handler_method)
 {
     int i;
     Aml *ifctx;
     Aml *method;
-    Aml *pci_scope;
     Aml *sb_scope;
     Aml *mem_ctrl_dev;
+    char *scan_path;
+    char *mhp_res_path = g_strdup_printf("%s." MEMORY_HOTPLUG_DEVICE, res_root);
 
-    /* scope for memory hotplug controller device node */
-    pci_scope = aml_scope("_SB.PCI0");
-    mem_ctrl_dev = aml_device(MEMORY_HOTPLUG_DEVICE);
+    mem_ctrl_dev = aml_device("%s", mhp_res_path);
     {
         Aml *crs;
         Aml *field;
@@ -610,47 +611,50 @@ void build_memory_hotplug_aml(Aml *table, uint32_t nr_mem,
         }
         aml_append(mem_ctrl_dev, method);
     }
-    aml_append(pci_scope, mem_ctrl_dev);
-    aml_append(table, pci_scope);
+    aml_append(table, mem_ctrl_dev);
 
     sb_scope = aml_scope("_SB");
     /* build memory devices */
     for (i = 0; i < nr_mem; i++) {
-        #define BASEPATH "\\_SB.PCI0." MEMORY_HOTPLUG_DEVICE "."
         Aml *dev;
-        const char *s;
+        char *s;
 
         dev = aml_device("MP%02X", i);
         aml_append(dev, aml_name_decl("_UID", aml_string("0x%02X", i)));
         aml_append(dev, aml_name_decl("_HID", aml_eisaid("PNP0C80")));
 
         method = aml_method("_CRS", 0, AML_NOTSERIALIZED);
-        s = BASEPATH MEMORY_SLOT_CRS_METHOD;
+        s = g_strdup_printf("%s.%s", mhp_res_path, MEMORY_SLOT_CRS_METHOD);
         aml_append(method, aml_return(aml_call1(s, aml_name("_UID"))));
+        g_free(s);
         aml_append(dev, method);
 
         method = aml_method("_STA", 0, AML_NOTSERIALIZED);
-        s = BASEPATH MEMORY_SLOT_STATUS_METHOD;
+        s = g_strdup_printf("%s.%s", mhp_res_path, MEMORY_SLOT_STATUS_METHOD);
         aml_append(method, aml_return(aml_call1(s, aml_name("_UID"))));
+        g_free(s);
         aml_append(dev, method);
 
         method = aml_method("_PXM", 0, AML_NOTSERIALIZED);
-        s = BASEPATH MEMORY_SLOT_PROXIMITY_METHOD;
+        s = g_strdup_printf("%s.%s", mhp_res_path,
+                            MEMORY_SLOT_PROXIMITY_METHOD);
         aml_append(method, aml_return(aml_call1(s, aml_name("_UID"))));
+        g_free(s);
         aml_append(dev, method);
 
         method = aml_method("_OST", 3, AML_NOTSERIALIZED);
-        s = BASEPATH MEMORY_SLOT_OST_METHOD;
-
+        s = g_strdup_printf("%s.%s", mhp_res_path, MEMORY_SLOT_OST_METHOD);
         aml_append(method, aml_return(aml_call4(
             s, aml_name("_UID"), aml_arg(0), aml_arg(1), aml_arg(2)
         )));
+        g_free(s);
         aml_append(dev, method);
 
         method = aml_method("_EJ0", 1, AML_NOTSERIALIZED);
-        s = BASEPATH MEMORY_SLOT_EJECT_METHOD;
+        s = g_strdup_printf("%s.%s", mhp_res_path, MEMORY_SLOT_EJECT_METHOD);
         aml_append(method, aml_return(aml_call2(
                    s, aml_name("_UID"), aml_arg(0))));
+        g_free(s);
         aml_append(dev, method);
 
         aml_append(sb_scope, dev);
@@ -669,4 +673,12 @@ void build_memory_hotplug_aml(Aml *table, uint32_t nr_mem,
     }
     aml_append(sb_scope, method);
     aml_append(table, sb_scope);
+
+    method = aml_method(event_handler_method, 0, AML_NOTSERIALIZED);
+    scan_path = g_strdup_printf("%s.%s", mhp_res_path, MEMORY_SLOT_SCAN_METHOD);
+    aml_append(method, aml_call0(scan_path));
+    g_free(scan_path);
+    aml_append(table, method);
+
+    g_free(mhp_res_path);
 }
diff --git a/hw/i386/acpi-build.c b/hw/i386/acpi-build.c
index 690e9a0..b7f4682 100644
--- a/hw/i386/acpi-build.c
+++ b/hw/i386/acpi-build.c
@@ -1926,7 +1926,8 @@ build_dsdt(GArray *table_data, BIOSLinker *linker,
                        "\\_SB.PCI0", "\\_GPE._E02");
     }
     build_memory_hotplug_aml(dsdt, nr_mem, pm->mem_hp_io_base,
-                             pm->mem_hp_io_len);
+                             pm->mem_hp_io_len,
+                             "\\_SB.PCI0", "\\_GPE._E03");
 
     scope =  aml_scope("_GPE");
     {
@@ -1941,10 +1942,6 @@ build_dsdt(GArray *table_data, BIOSLinker *linker,
             aml_append(scope, method);
         }
 
-        method = aml_method("_E03", 0, AML_NOTSERIALIZED);
-        aml_append(method, aml_call0(MEMORY_HOTPLUG_HANDLER_PATH));
-        aml_append(scope, method);
-
         if (pcms->acpi_nvdimm_state.is_enabled) {
             method = aml_method("_E04", 0, AML_NOTSERIALIZED);
             aml_append(method, aml_notify(aml_name("\\_SB.NVDR"),
-- 
2.7.4

  parent reply	other threads:[~2016-12-05 23:32 UTC|newest]

Thread overview: 37+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2016-12-05 23:32 [Qemu-devel] [PATCH for-2.9 00/10] pc: acpi: memory hotplug cleanup/consolidation Igor Mammedov
2016-12-05 23:32 ` [Qemu-devel] [PATCH for-2.9 01/10] tests: pc: add memory hotplug acpi tables tests Igor Mammedov
2016-12-20 10:40   ` Marcel Apfelbaum
2016-12-20 16:17     ` Igor Mammedov
2016-12-20 17:00       ` Marcel Apfelbaum
2016-12-05 23:32 ` [Qemu-devel] [PATCH for-2.9 02/10] tests: pc: acpi: add SRAT and DSDT blobs for memory hotplug variant Igor Mammedov
2016-12-05 23:32 ` [Qemu-devel] [PATCH for-2.9 03/10] memhp: move build_memory_hotplug_aml() into memory_hotplug.c Igor Mammedov
2016-12-20 10:42   ` Marcel Apfelbaum
2016-12-05 23:32 ` [Qemu-devel] [PATCH for-2.9 04/10] memhp: move build_memory_devices() " Igor Mammedov
2016-12-20 10:44   ` Marcel Apfelbaum
2016-12-20 16:24     ` Igor Mammedov
2016-12-05 23:32 ` [Qemu-devel] [PATCH for-2.9 05/10] memhp: consolidate scattered MHPD device declaration Igor Mammedov
2016-12-20 11:00   ` Marcel Apfelbaum
2016-12-20 16:34     ` Igor Mammedov
2016-12-21 11:54       ` Marcel Apfelbaum
2016-12-05 23:32 ` [Qemu-devel] [PATCH for-2.9 06/10] memhp: merge build_memory_devices() into build_memory_hotplug_aml() Igor Mammedov
2016-12-21 12:10   ` Marcel Apfelbaum
2016-12-21 12:54     ` Igor Mammedov
2016-12-05 23:32 ` Igor Mammedov [this message]
2016-12-21 12:31   ` [Qemu-devel] [PATCH for-2.9 07/10] memhp: move GPE handler_E03 " Marcel Apfelbaum
2016-12-21 13:39     ` Igor Mammedov
2016-12-22 10:45       ` Marcel Apfelbaum
2016-12-22 15:10   ` [Qemu-devel] [PATCH for-2.9 v2 " Igor Mammedov
2016-12-05 23:32 ` [Qemu-devel] [PATCH for-2.9 08/10] memhp: move memory hotplug only defines to memory_hotplug.c Igor Mammedov
2016-12-21 12:32   ` Marcel Apfelbaum
2016-12-05 23:32 ` [Qemu-devel] [PATCH for-2.9 09/10] memhp: don't generate memory hotplug AML if it's not enabled/supported Igor Mammedov
2016-12-22 10:55   ` Marcel Apfelbaum
2016-12-05 23:32 ` [Qemu-devel] [PATCH for-2.9 10/10] memhp: move DIMM devices into dedicated scope with related common methods Igor Mammedov
2016-12-22 12:31   ` Marcel Apfelbaum
2016-12-22 13:31     ` Igor Mammedov
2016-12-22 13:53       ` Marcel Apfelbaum
2016-12-22 14:10         ` Igor Mammedov
2016-12-16  9:07 ` [Qemu-devel] [PATCH for-2.9 00/10] pc: acpi: memory hotplug cleanup/consolidation Igor Mammedov
2017-01-09 14:22 ` Igor Mammedov
2017-01-09 14:39   ` Michael S. Tsirkin
2017-01-10  5:08   ` Michael S. Tsirkin
2017-01-10 12:29     ` Igor Mammedov

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1480980749-182204-8-git-send-email-imammedo@redhat.com \
    --to=imammedo@redhat.com \
    --cc=ehabkost@redhat.com \
    --cc=marcel@redhat.com \
    --cc=mst@redhat.com \
    --cc=qemu-devel@nongnu.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).