From: Thomas Huth <huth@tuxfamily.org>
To: qemu-devel@nongnu.org, Laurent Vivier <laurent@vivier.eu>,
Jason Wang <jasowang@redhat.com>
Subject: [Qemu-devel] [PATCH v2] m68k: QOMify the MCF Fast Ethernet Controller device
Date: Sun, 8 Jan 2017 12:51:55 +0100 [thread overview]
Message-ID: <1483876315-10678-1-git-send-email-huth@tuxfamily.org> (raw)
When running qemu-system-m68k with the "-net" parameter (for example
simply "-net nic -net user"), there is currently a confusing warning
message saying:
Warning: requested NIC (anonymous, model mcf_fec) was not created
(not supported by this machine?)
This seems to happen because the MCF NIC has never been adapted to
the currently expected QEMU device behavior. Thus let's QOMify the
NIC now to get rid of the warning message.
Signed-off-by: Thomas Huth <huth@tuxfamily.org>
---
v2:
- Add the mcf_fec.h header file for the shared #defines
- Use qemu_check_nic_model() to verify the NIC model
hw/m68k/mcf5208.c | 25 ++++++++++++++++-
hw/net/mcf_fec.c | 71 +++++++++++++++++++++++++++++++++++------------
include/hw/m68k/mcf.h | 4 ---
include/hw/m68k/mcf_fec.h | 13 +++++++++
4 files changed, 90 insertions(+), 23 deletions(-)
create mode 100644 include/hw/m68k/mcf_fec.h
diff --git a/hw/m68k/mcf5208.c b/hw/m68k/mcf5208.c
index 3438314..bad1d33 100644
--- a/hw/m68k/mcf5208.c
+++ b/hw/m68k/mcf5208.c
@@ -11,6 +11,7 @@
#include "cpu.h"
#include "hw/hw.h"
#include "hw/m68k/mcf.h"
+#include "hw/m68k/mcf_fec.h"
#include "qemu/timer.h"
#include "hw/ptimer.h"
#include "sysemu/sysemu.h"
@@ -18,6 +19,7 @@
#include "net/net.h"
#include "hw/boards.h"
#include "hw/loader.h"
+#include "hw/sysbus.h"
#include "elf.h"
#include "exec/address-spaces.h"
@@ -192,6 +194,26 @@ static void mcf5208_sys_init(MemoryRegion *address_space, qemu_irq *pic)
}
}
+static void mcf_fec_init(MemoryRegion *sysmem, NICInfo *nd, hwaddr base,
+ qemu_irq *irqs)
+{
+ DeviceState *dev;
+ SysBusDevice *s;
+ int i;
+
+ qemu_check_nic_model(nd, TYPE_MCF_FEC_NET);
+ dev = qdev_create(NULL, TYPE_MCF_FEC_NET);
+ qdev_set_nic_properties(dev, nd);
+ qdev_init_nofail(dev);
+
+ s = SYS_BUS_DEVICE(dev);
+ for (i = 0; i < FEC_NUM_IRQ; i++) {
+ sysbus_connect_irq(s, i, irqs[i]);
+ }
+
+ memory_region_add_subregion(sysmem, base, sysbus_mmio_get_region(s, 0));
+}
+
static void mcf5208evb_init(MachineState *machine)
{
ram_addr_t ram_size = machine->ram_size;
@@ -243,9 +265,10 @@ static void mcf5208evb_init(MachineState *machine)
fprintf(stderr, "Too many NICs\n");
exit(1);
}
- if (nd_table[0].used)
+ if (nd_table[0].used) {
mcf_fec_init(address_space_mem, &nd_table[0],
0xfc030000, pic + 36);
+ }
/* 0xfc000000 SCM. */
/* 0xfc004000 XBS. */
diff --git a/hw/net/mcf_fec.c b/hw/net/mcf_fec.c
index 4025eb3..a3eca7e 100644
--- a/hw/net/mcf_fec.c
+++ b/hw/net/mcf_fec.c
@@ -9,7 +9,9 @@
#include "hw/hw.h"
#include "net/net.h"
#include "hw/m68k/mcf.h"
+#include "hw/m68k/mcf_fec.h"
#include "hw/net/mii.h"
+#include "hw/sysbus.h"
/* For crc32 */
#include <zlib.h>
#include "exec/address-spaces.h"
@@ -27,9 +29,10 @@ do { printf("mcf_fec: " fmt , ## __VA_ARGS__); } while (0)
#define FEC_MAX_FRAME_SIZE 2032
typedef struct {
- MemoryRegion *sysmem;
+ SysBusDevice parent_obj;
+
MemoryRegion iomem;
- qemu_irq *irq;
+ qemu_irq irq[FEC_NUM_IRQ];
NICState *nic;
NICConf conf;
uint32_t irq_state;
@@ -68,7 +71,6 @@ typedef struct {
#define FEC_RESET 1
/* Map interrupt flags onto IRQ lines. */
-#define FEC_NUM_IRQ 13
static const uint32_t mcf_fec_irq_map[FEC_NUM_IRQ] = {
FEC_INT_TXF,
FEC_INT_TXB,
@@ -208,8 +210,10 @@ static void mcf_fec_enable_rx(mcf_fec_state *s)
}
}
-static void mcf_fec_reset(mcf_fec_state *s)
+static void mcf_fec_reset(DeviceState *dev)
{
+ mcf_fec_state *s = MCF_FEC_NET(dev);
+
s->eir = 0;
s->eimr = 0;
s->rx_enabled = 0;
@@ -330,7 +334,7 @@ static void mcf_fec_write(void *opaque, hwaddr addr,
s->ecr = value;
if (value & FEC_RESET) {
DPRINTF("Reset\n");
- mcf_fec_reset(s);
+ mcf_fec_reset(opaque);
}
if ((s->ecr & FEC_EN) == 0) {
s->rx_enabled = 0;
@@ -513,24 +517,55 @@ static NetClientInfo net_mcf_fec_info = {
.receive = mcf_fec_receive,
};
-void mcf_fec_init(MemoryRegion *sysmem, NICInfo *nd,
- hwaddr base, qemu_irq *irq)
+static void mcf_fec_realize(DeviceState *dev, Error **errp)
{
- mcf_fec_state *s;
+ mcf_fec_state *s = MCF_FEC_NET(dev);
+
+ s->nic = qemu_new_nic(&net_mcf_fec_info, &s->conf,
+ object_get_typename(OBJECT(dev)), dev->id, s);
+ qemu_format_nic_info_str(qemu_get_queue(s->nic), s->conf.macaddr.a);
+}
- qemu_check_nic_model(nd, "mcf_fec");
+static void mcf_fec_instance_init(Object *obj)
+{
+ SysBusDevice *sbd = SYS_BUS_DEVICE(obj);
+ mcf_fec_state *s = MCF_FEC_NET(obj);
+ int i;
+
+ memory_region_init_io(&s->iomem, obj, &mcf_fec_ops, s, "fec", 0x400);
+ sysbus_init_mmio(sbd, &s->iomem);
+ for (i = 0; i < FEC_NUM_IRQ; i++) {
+ sysbus_init_irq(sbd, &s->irq[i]);
+ }
+}
- s = (mcf_fec_state *)g_malloc0(sizeof(mcf_fec_state));
- s->sysmem = sysmem;
- s->irq = irq;
+static Property mcf_fec_properties[] = {
+ DEFINE_NIC_PROPERTIES(mcf_fec_state, conf),
+ DEFINE_PROP_END_OF_LIST(),
+};
- memory_region_init_io(&s->iomem, NULL, &mcf_fec_ops, s, "fec", 0x400);
- memory_region_add_subregion(sysmem, base, &s->iomem);
+static void mcf_fec_class_init(ObjectClass *oc, void *data)
+{
+ DeviceClass *dc = DEVICE_CLASS(oc);
- s->conf.macaddr = nd->macaddr;
- s->conf.peers.ncs[0] = nd->netdev;
+ set_bit(DEVICE_CATEGORY_NETWORK, dc->categories);
+ dc->realize = mcf_fec_realize;
+ dc->desc = "MCF Fast Ethernet Controller network device";
+ dc->reset = mcf_fec_reset;
+ dc->props = mcf_fec_properties;
+}
- s->nic = qemu_new_nic(&net_mcf_fec_info, &s->conf, nd->model, nd->name, s);
+static const TypeInfo mcf_fec_info = {
+ .name = TYPE_MCF_FEC_NET,
+ .parent = TYPE_SYS_BUS_DEVICE,
+ .instance_size = sizeof(mcf_fec_state),
+ .instance_init = mcf_fec_instance_init,
+ .class_init = mcf_fec_class_init,
+};
- qemu_format_nic_info_str(qemu_get_queue(s->nic), s->conf.macaddr.a);
+static void mcf_fec_register_types(void)
+{
+ type_register_static(&mcf_fec_info);
}
+
+type_init(mcf_fec_register_types)
diff --git a/include/hw/m68k/mcf.h b/include/hw/m68k/mcf.h
index fdae229..bf43998 100644
--- a/include/hw/m68k/mcf.h
+++ b/include/hw/m68k/mcf.h
@@ -21,10 +21,6 @@ qemu_irq *mcf_intc_init(struct MemoryRegion *sysmem,
hwaddr base,
M68kCPU *cpu);
-/* mcf_fec.c */
-void mcf_fec_init(struct MemoryRegion *sysmem, NICInfo *nd,
- hwaddr base, qemu_irq *irq);
-
/* mcf5206.c */
qemu_irq *mcf5206_init(struct MemoryRegion *sysmem,
uint32_t base, M68kCPU *cpu);
diff --git a/include/hw/m68k/mcf_fec.h b/include/hw/m68k/mcf_fec.h
new file mode 100644
index 0000000..7f029f7
--- /dev/null
+++ b/include/hw/m68k/mcf_fec.h
@@ -0,0 +1,13 @@
+/*
+ * Definitions for the ColdFire Fast Ethernet Controller emulation.
+ *
+ * This code is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#define TYPE_MCF_FEC_NET "mcf-fec"
+#define MCF_FEC_NET(obj) OBJECT_CHECK(mcf_fec_state, (obj), TYPE_MCF_FEC_NET)
+
+#define FEC_NUM_IRQ 13
--
2.7.4
next reply other threads:[~2017-01-08 11:52 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-01-08 11:51 Thomas Huth [this message]
2017-01-09 4:00 ` [Qemu-devel] [PATCH v2] m68k: QOMify the MCF Fast Ethernet Controller device Jason Wang
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1483876315-10678-1-git-send-email-huth@tuxfamily.org \
--to=huth@tuxfamily.org \
--cc=jasowang@redhat.com \
--cc=laurent@vivier.eu \
--cc=qemu-devel@nongnu.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).