From: "Michael S. Tsirkin" <mst@redhat.com>
To: qemu-devel@nongnu.org
Cc: Peter Maydell <peter.maydell@linaro.org>,
Igor Mammedov <imammedo@redhat.com>,
Marcel Apfelbaum <marcel@redhat.com>
Subject: [Qemu-devel] [PULL 33/41] memhp: move build_memory_hotplug_aml() into memory_hotplug.c
Date: Tue, 10 Jan 2017 07:40:44 +0200 [thread overview]
Message-ID: <1484026704-28027-34-git-send-email-mst@redhat.com> (raw)
In-Reply-To: <1484026704-28027-1-git-send-email-mst@redhat.com>
From: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Marcel Apfelbaum <marcel@redhat.com>
---
hw/acpi/memory_hotplug.c | 247 +++++++++++++++++++++++++++++++++
hw/acpi/memory_hotplug_acpi_table.c | 262 ------------------------------------
hw/acpi/Makefile.objs | 2 +-
3 files changed, 248 insertions(+), 263 deletions(-)
delete mode 100644 hw/acpi/memory_hotplug_acpi_table.c
diff --git a/hw/acpi/memory_hotplug.c b/hw/acpi/memory_hotplug.c
index ec4e64b..57ac4fc 100644
--- a/hw/acpi/memory_hotplug.c
+++ b/hw/acpi/memory_hotplug.c
@@ -306,3 +306,250 @@ const VMStateDescription vmstate_memory_hotplug = {
VMSTATE_END_OF_LIST()
}
};
+
+void build_memory_hotplug_aml(Aml *ctx, uint32_t nr_mem,
+ uint16_t io_base, uint16_t io_len)
+{
+ Aml *ifctx;
+ Aml *method;
+ Aml *pci_scope;
+ Aml *mem_ctrl_dev;
+
+ /* scope for memory hotplug controller device node */
+ pci_scope = aml_scope("_SB.PCI0");
+ mem_ctrl_dev = aml_device(MEMORY_HOTPLUG_DEVICE);
+ {
+ Aml *one = aml_int(1);
+ Aml *zero = aml_int(0);
+ Aml *ret_val = aml_local(0);
+ Aml *slot_arg0 = aml_arg(0);
+ Aml *slots_nr = aml_name(MEMORY_SLOTS_NUMBER);
+ Aml *ctrl_lock = aml_name(MEMORY_SLOT_LOCK);
+ Aml *slot_selector = aml_name(MEMORY_SLOT_SLECTOR);
+
+ aml_append(mem_ctrl_dev, aml_name_decl("_HID", aml_string("PNP0A06")));
+ aml_append(mem_ctrl_dev,
+ aml_name_decl("_UID", aml_string("Memory hotplug resources")));
+
+ method = aml_method("_STA", 0, AML_NOTSERIALIZED);
+ ifctx = aml_if(aml_equal(slots_nr, zero));
+ {
+ aml_append(ifctx, aml_return(zero));
+ }
+ aml_append(method, ifctx);
+ /* present, functioning, decoding, not shown in UI */
+ aml_append(method, aml_return(aml_int(0xB)));
+ aml_append(mem_ctrl_dev, method);
+
+ aml_append(mem_ctrl_dev, aml_mutex(MEMORY_SLOT_LOCK, 0));
+
+ method = aml_method(MEMORY_SLOT_SCAN_METHOD, 0, AML_NOTSERIALIZED);
+ {
+ Aml *else_ctx;
+ Aml *while_ctx;
+ Aml *idx = aml_local(0);
+ Aml *eject_req = aml_int(3);
+ Aml *dev_chk = aml_int(1);
+
+ ifctx = aml_if(aml_equal(slots_nr, zero));
+ {
+ aml_append(ifctx, aml_return(zero));
+ }
+ aml_append(method, ifctx);
+
+ aml_append(method, aml_store(zero, idx));
+ aml_append(method, aml_acquire(ctrl_lock, 0xFFFF));
+ /* build AML that:
+ * loops over all slots and Notifies DIMMs with
+ * Device Check or Eject Request notifications if
+ * slot has corresponding status bit set and clears
+ * slot status.
+ */
+ while_ctx = aml_while(aml_lless(idx, slots_nr));
+ {
+ Aml *ins_evt = aml_name(MEMORY_SLOT_INSERT_EVENT);
+ Aml *rm_evt = aml_name(MEMORY_SLOT_REMOVE_EVENT);
+
+ aml_append(while_ctx, aml_store(idx, slot_selector));
+ ifctx = aml_if(aml_equal(ins_evt, one));
+ {
+ aml_append(ifctx,
+ aml_call2(MEMORY_SLOT_NOTIFY_METHOD,
+ idx, dev_chk));
+ aml_append(ifctx, aml_store(one, ins_evt));
+ }
+ aml_append(while_ctx, ifctx);
+
+ else_ctx = aml_else();
+ ifctx = aml_if(aml_equal(rm_evt, one));
+ {
+ aml_append(ifctx,
+ aml_call2(MEMORY_SLOT_NOTIFY_METHOD,
+ idx, eject_req));
+ aml_append(ifctx, aml_store(one, rm_evt));
+ }
+ aml_append(else_ctx, ifctx);
+ aml_append(while_ctx, else_ctx);
+
+ aml_append(while_ctx, aml_add(idx, one, idx));
+ }
+ aml_append(method, while_ctx);
+ aml_append(method, aml_release(ctrl_lock));
+ aml_append(method, aml_return(one));
+ }
+ aml_append(mem_ctrl_dev, method);
+
+ method = aml_method(MEMORY_SLOT_STATUS_METHOD, 1, AML_NOTSERIALIZED);
+ {
+ Aml *slot_enabled = aml_name(MEMORY_SLOT_ENABLED);
+
+ aml_append(method, aml_store(zero, ret_val));
+ aml_append(method, aml_acquire(ctrl_lock, 0xFFFF));
+ aml_append(method,
+ aml_store(aml_to_integer(slot_arg0), slot_selector));
+
+ ifctx = aml_if(aml_equal(slot_enabled, one));
+ {
+ aml_append(ifctx, aml_store(aml_int(0xF), ret_val));
+ }
+ aml_append(method, ifctx);
+
+ aml_append(method, aml_release(ctrl_lock));
+ aml_append(method, aml_return(ret_val));
+ }
+ aml_append(mem_ctrl_dev, method);
+
+ method = aml_method(MEMORY_SLOT_CRS_METHOD, 1, AML_SERIALIZED);
+ {
+ Aml *mr64 = aml_name("MR64");
+ Aml *mr32 = aml_name("MR32");
+ Aml *crs_tmpl = aml_resource_template();
+ Aml *minl = aml_name("MINL");
+ Aml *minh = aml_name("MINH");
+ Aml *maxl = aml_name("MAXL");
+ Aml *maxh = aml_name("MAXH");
+ Aml *lenl = aml_name("LENL");
+ Aml *lenh = aml_name("LENH");
+
+ aml_append(method, aml_acquire(ctrl_lock, 0xFFFF));
+ aml_append(method, aml_store(aml_to_integer(slot_arg0),
+ slot_selector));
+
+ aml_append(crs_tmpl,
+ aml_qword_memory(AML_POS_DECODE, AML_MIN_FIXED, AML_MAX_FIXED,
+ AML_CACHEABLE, AML_READ_WRITE,
+ 0, 0x0, 0xFFFFFFFFFFFFFFFEULL, 0,
+ 0xFFFFFFFFFFFFFFFFULL));
+ aml_append(method, aml_name_decl("MR64", crs_tmpl));
+ aml_append(method,
+ aml_create_dword_field(mr64, aml_int(14), "MINL"));
+ aml_append(method,
+ aml_create_dword_field(mr64, aml_int(18), "MINH"));
+ aml_append(method,
+ aml_create_dword_field(mr64, aml_int(38), "LENL"));
+ aml_append(method,
+ aml_create_dword_field(mr64, aml_int(42), "LENH"));
+ aml_append(method,
+ aml_create_dword_field(mr64, aml_int(22), "MAXL"));
+ aml_append(method,
+ aml_create_dword_field(mr64, aml_int(26), "MAXH"));
+
+ aml_append(method,
+ aml_store(aml_name(MEMORY_SLOT_ADDR_HIGH), minh));
+ aml_append(method,
+ aml_store(aml_name(MEMORY_SLOT_ADDR_LOW), minl));
+ aml_append(method,
+ aml_store(aml_name(MEMORY_SLOT_SIZE_HIGH), lenh));
+ aml_append(method,
+ aml_store(aml_name(MEMORY_SLOT_SIZE_LOW), lenl));
+
+ /* 64-bit math: MAX = MIN + LEN - 1 */
+ aml_append(method, aml_add(minl, lenl, maxl));
+ aml_append(method, aml_add(minh, lenh, maxh));
+ ifctx = aml_if(aml_lless(maxl, minl));
+ {
+ aml_append(ifctx, aml_add(maxh, one, maxh));
+ }
+ aml_append(method, ifctx);
+ ifctx = aml_if(aml_lless(maxl, one));
+ {
+ aml_append(ifctx, aml_subtract(maxh, one, maxh));
+ }
+ aml_append(method, ifctx);
+ aml_append(method, aml_subtract(maxl, one, maxl));
+
+ /* return 32-bit _CRS if addr/size is in low mem */
+ /* TODO: remove it since all hotplugged DIMMs are in high mem */
+ ifctx = aml_if(aml_equal(maxh, zero));
+ {
+ crs_tmpl = aml_resource_template();
+ aml_append(crs_tmpl,
+ aml_dword_memory(AML_POS_DECODE, AML_MIN_FIXED,
+ AML_MAX_FIXED, AML_CACHEABLE,
+ AML_READ_WRITE,
+ 0, 0x0, 0xFFFFFFFE, 0,
+ 0xFFFFFFFF));
+ aml_append(ifctx, aml_name_decl("MR32", crs_tmpl));
+ aml_append(ifctx,
+ aml_create_dword_field(mr32, aml_int(10), "MIN"));
+ aml_append(ifctx,
+ aml_create_dword_field(mr32, aml_int(14), "MAX"));
+ aml_append(ifctx,
+ aml_create_dword_field(mr32, aml_int(22), "LEN"));
+ aml_append(ifctx, aml_store(minl, aml_name("MIN")));
+ aml_append(ifctx, aml_store(maxl, aml_name("MAX")));
+ aml_append(ifctx, aml_store(lenl, aml_name("LEN")));
+
+ aml_append(ifctx, aml_release(ctrl_lock));
+ aml_append(ifctx, aml_return(mr32));
+ }
+ aml_append(method, ifctx);
+
+ aml_append(method, aml_release(ctrl_lock));
+ aml_append(method, aml_return(mr64));
+ }
+ aml_append(mem_ctrl_dev, method);
+
+ method = aml_method(MEMORY_SLOT_PROXIMITY_METHOD, 1,
+ AML_NOTSERIALIZED);
+ {
+ Aml *proximity = aml_name(MEMORY_SLOT_PROXIMITY);
+
+ aml_append(method, aml_acquire(ctrl_lock, 0xFFFF));
+ aml_append(method, aml_store(aml_to_integer(slot_arg0),
+ slot_selector));
+ aml_append(method, aml_store(proximity, ret_val));
+ aml_append(method, aml_release(ctrl_lock));
+ aml_append(method, aml_return(ret_val));
+ }
+ aml_append(mem_ctrl_dev, method);
+
+ method = aml_method(MEMORY_SLOT_OST_METHOD, 4, AML_NOTSERIALIZED);
+ {
+ Aml *ost_evt = aml_name(MEMORY_SLOT_OST_EVENT);
+ Aml *ost_status = aml_name(MEMORY_SLOT_OST_STATUS);
+
+ aml_append(method, aml_acquire(ctrl_lock, 0xFFFF));
+ aml_append(method, aml_store(aml_to_integer(slot_arg0),
+ slot_selector));
+ aml_append(method, aml_store(aml_arg(1), ost_evt));
+ aml_append(method, aml_store(aml_arg(2), ost_status));
+ aml_append(method, aml_release(ctrl_lock));
+ }
+ aml_append(mem_ctrl_dev, method);
+
+ method = aml_method(MEMORY_SLOT_EJECT_METHOD, 2, AML_NOTSERIALIZED);
+ {
+ Aml *eject = aml_name(MEMORY_SLOT_EJECT);
+
+ aml_append(method, aml_acquire(ctrl_lock, 0xFFFF));
+ aml_append(method, aml_store(aml_to_integer(slot_arg0),
+ slot_selector));
+ aml_append(method, aml_store(one, eject));
+ aml_append(method, aml_release(ctrl_lock));
+ }
+ aml_append(mem_ctrl_dev, method);
+ }
+ aml_append(pci_scope, mem_ctrl_dev);
+ aml_append(ctx, pci_scope);
+}
diff --git a/hw/acpi/memory_hotplug_acpi_table.c b/hw/acpi/memory_hotplug_acpi_table.c
deleted file mode 100644
index c756602..0000000
--- a/hw/acpi/memory_hotplug_acpi_table.c
+++ /dev/null
@@ -1,262 +0,0 @@
-/*
- * Memory hotplug AML code of DSDT ACPI table
- *
- * Copyright (C) 2015 Red Hat Inc
- *
- * Author: Igor Mammedov <imammedo@redhat.com>
- *
- * This work is licensed under the terms of the GNU GPL, version 2 or later.
- * See the COPYING file in the top-level directory.
- */
-
-#include "qemu/osdep.h"
-#include "hw/acpi/memory_hotplug.h"
-#include "include/hw/acpi/pc-hotplug.h"
-#include "hw/boards.h"
-
-void build_memory_hotplug_aml(Aml *ctx, uint32_t nr_mem,
- uint16_t io_base, uint16_t io_len)
-{
- Aml *ifctx;
- Aml *method;
- Aml *pci_scope;
- Aml *mem_ctrl_dev;
-
- /* scope for memory hotplug controller device node */
- pci_scope = aml_scope("_SB.PCI0");
- mem_ctrl_dev = aml_device(MEMORY_HOTPLUG_DEVICE);
- {
- Aml *one = aml_int(1);
- Aml *zero = aml_int(0);
- Aml *ret_val = aml_local(0);
- Aml *slot_arg0 = aml_arg(0);
- Aml *slots_nr = aml_name(MEMORY_SLOTS_NUMBER);
- Aml *ctrl_lock = aml_name(MEMORY_SLOT_LOCK);
- Aml *slot_selector = aml_name(MEMORY_SLOT_SLECTOR);
-
- aml_append(mem_ctrl_dev, aml_name_decl("_HID", aml_string("PNP0A06")));
- aml_append(mem_ctrl_dev,
- aml_name_decl("_UID", aml_string("Memory hotplug resources")));
-
- method = aml_method("_STA", 0, AML_NOTSERIALIZED);
- ifctx = aml_if(aml_equal(slots_nr, zero));
- {
- aml_append(ifctx, aml_return(zero));
- }
- aml_append(method, ifctx);
- /* present, functioning, decoding, not shown in UI */
- aml_append(method, aml_return(aml_int(0xB)));
- aml_append(mem_ctrl_dev, method);
-
- aml_append(mem_ctrl_dev, aml_mutex(MEMORY_SLOT_LOCK, 0));
-
- method = aml_method(MEMORY_SLOT_SCAN_METHOD, 0, AML_NOTSERIALIZED);
- {
- Aml *else_ctx;
- Aml *while_ctx;
- Aml *idx = aml_local(0);
- Aml *eject_req = aml_int(3);
- Aml *dev_chk = aml_int(1);
-
- ifctx = aml_if(aml_equal(slots_nr, zero));
- {
- aml_append(ifctx, aml_return(zero));
- }
- aml_append(method, ifctx);
-
- aml_append(method, aml_store(zero, idx));
- aml_append(method, aml_acquire(ctrl_lock, 0xFFFF));
- /* build AML that:
- * loops over all slots and Notifies DIMMs with
- * Device Check or Eject Request notifications if
- * slot has corresponding status bit set and clears
- * slot status.
- */
- while_ctx = aml_while(aml_lless(idx, slots_nr));
- {
- Aml *ins_evt = aml_name(MEMORY_SLOT_INSERT_EVENT);
- Aml *rm_evt = aml_name(MEMORY_SLOT_REMOVE_EVENT);
-
- aml_append(while_ctx, aml_store(idx, slot_selector));
- ifctx = aml_if(aml_equal(ins_evt, one));
- {
- aml_append(ifctx,
- aml_call2(MEMORY_SLOT_NOTIFY_METHOD,
- idx, dev_chk));
- aml_append(ifctx, aml_store(one, ins_evt));
- }
- aml_append(while_ctx, ifctx);
-
- else_ctx = aml_else();
- ifctx = aml_if(aml_equal(rm_evt, one));
- {
- aml_append(ifctx,
- aml_call2(MEMORY_SLOT_NOTIFY_METHOD,
- idx, eject_req));
- aml_append(ifctx, aml_store(one, rm_evt));
- }
- aml_append(else_ctx, ifctx);
- aml_append(while_ctx, else_ctx);
-
- aml_append(while_ctx, aml_add(idx, one, idx));
- }
- aml_append(method, while_ctx);
- aml_append(method, aml_release(ctrl_lock));
- aml_append(method, aml_return(one));
- }
- aml_append(mem_ctrl_dev, method);
-
- method = aml_method(MEMORY_SLOT_STATUS_METHOD, 1, AML_NOTSERIALIZED);
- {
- Aml *slot_enabled = aml_name(MEMORY_SLOT_ENABLED);
-
- aml_append(method, aml_store(zero, ret_val));
- aml_append(method, aml_acquire(ctrl_lock, 0xFFFF));
- aml_append(method,
- aml_store(aml_to_integer(slot_arg0), slot_selector));
-
- ifctx = aml_if(aml_equal(slot_enabled, one));
- {
- aml_append(ifctx, aml_store(aml_int(0xF), ret_val));
- }
- aml_append(method, ifctx);
-
- aml_append(method, aml_release(ctrl_lock));
- aml_append(method, aml_return(ret_val));
- }
- aml_append(mem_ctrl_dev, method);
-
- method = aml_method(MEMORY_SLOT_CRS_METHOD, 1, AML_SERIALIZED);
- {
- Aml *mr64 = aml_name("MR64");
- Aml *mr32 = aml_name("MR32");
- Aml *crs_tmpl = aml_resource_template();
- Aml *minl = aml_name("MINL");
- Aml *minh = aml_name("MINH");
- Aml *maxl = aml_name("MAXL");
- Aml *maxh = aml_name("MAXH");
- Aml *lenl = aml_name("LENL");
- Aml *lenh = aml_name("LENH");
-
- aml_append(method, aml_acquire(ctrl_lock, 0xFFFF));
- aml_append(method, aml_store(aml_to_integer(slot_arg0),
- slot_selector));
-
- aml_append(crs_tmpl,
- aml_qword_memory(AML_POS_DECODE, AML_MIN_FIXED, AML_MAX_FIXED,
- AML_CACHEABLE, AML_READ_WRITE,
- 0, 0x0, 0xFFFFFFFFFFFFFFFEULL, 0,
- 0xFFFFFFFFFFFFFFFFULL));
- aml_append(method, aml_name_decl("MR64", crs_tmpl));
- aml_append(method,
- aml_create_dword_field(mr64, aml_int(14), "MINL"));
- aml_append(method,
- aml_create_dword_field(mr64, aml_int(18), "MINH"));
- aml_append(method,
- aml_create_dword_field(mr64, aml_int(38), "LENL"));
- aml_append(method,
- aml_create_dword_field(mr64, aml_int(42), "LENH"));
- aml_append(method,
- aml_create_dword_field(mr64, aml_int(22), "MAXL"));
- aml_append(method,
- aml_create_dword_field(mr64, aml_int(26), "MAXH"));
-
- aml_append(method,
- aml_store(aml_name(MEMORY_SLOT_ADDR_HIGH), minh));
- aml_append(method,
- aml_store(aml_name(MEMORY_SLOT_ADDR_LOW), minl));
- aml_append(method,
- aml_store(aml_name(MEMORY_SLOT_SIZE_HIGH), lenh));
- aml_append(method,
- aml_store(aml_name(MEMORY_SLOT_SIZE_LOW), lenl));
-
- /* 64-bit math: MAX = MIN + LEN - 1 */
- aml_append(method, aml_add(minl, lenl, maxl));
- aml_append(method, aml_add(minh, lenh, maxh));
- ifctx = aml_if(aml_lless(maxl, minl));
- {
- aml_append(ifctx, aml_add(maxh, one, maxh));
- }
- aml_append(method, ifctx);
- ifctx = aml_if(aml_lless(maxl, one));
- {
- aml_append(ifctx, aml_subtract(maxh, one, maxh));
- }
- aml_append(method, ifctx);
- aml_append(method, aml_subtract(maxl, one, maxl));
-
- /* return 32-bit _CRS if addr/size is in low mem */
- /* TODO: remove it since all hotplugged DIMMs are in high mem */
- ifctx = aml_if(aml_equal(maxh, zero));
- {
- crs_tmpl = aml_resource_template();
- aml_append(crs_tmpl,
- aml_dword_memory(AML_POS_DECODE, AML_MIN_FIXED,
- AML_MAX_FIXED, AML_CACHEABLE,
- AML_READ_WRITE,
- 0, 0x0, 0xFFFFFFFE, 0,
- 0xFFFFFFFF));
- aml_append(ifctx, aml_name_decl("MR32", crs_tmpl));
- aml_append(ifctx,
- aml_create_dword_field(mr32, aml_int(10), "MIN"));
- aml_append(ifctx,
- aml_create_dword_field(mr32, aml_int(14), "MAX"));
- aml_append(ifctx,
- aml_create_dword_field(mr32, aml_int(22), "LEN"));
- aml_append(ifctx, aml_store(minl, aml_name("MIN")));
- aml_append(ifctx, aml_store(maxl, aml_name("MAX")));
- aml_append(ifctx, aml_store(lenl, aml_name("LEN")));
-
- aml_append(ifctx, aml_release(ctrl_lock));
- aml_append(ifctx, aml_return(mr32));
- }
- aml_append(method, ifctx);
-
- aml_append(method, aml_release(ctrl_lock));
- aml_append(method, aml_return(mr64));
- }
- aml_append(mem_ctrl_dev, method);
-
- method = aml_method(MEMORY_SLOT_PROXIMITY_METHOD, 1,
- AML_NOTSERIALIZED);
- {
- Aml *proximity = aml_name(MEMORY_SLOT_PROXIMITY);
-
- aml_append(method, aml_acquire(ctrl_lock, 0xFFFF));
- aml_append(method, aml_store(aml_to_integer(slot_arg0),
- slot_selector));
- aml_append(method, aml_store(proximity, ret_val));
- aml_append(method, aml_release(ctrl_lock));
- aml_append(method, aml_return(ret_val));
- }
- aml_append(mem_ctrl_dev, method);
-
- method = aml_method(MEMORY_SLOT_OST_METHOD, 4, AML_NOTSERIALIZED);
- {
- Aml *ost_evt = aml_name(MEMORY_SLOT_OST_EVENT);
- Aml *ost_status = aml_name(MEMORY_SLOT_OST_STATUS);
-
- aml_append(method, aml_acquire(ctrl_lock, 0xFFFF));
- aml_append(method, aml_store(aml_to_integer(slot_arg0),
- slot_selector));
- aml_append(method, aml_store(aml_arg(1), ost_evt));
- aml_append(method, aml_store(aml_arg(2), ost_status));
- aml_append(method, aml_release(ctrl_lock));
- }
- aml_append(mem_ctrl_dev, method);
-
- method = aml_method(MEMORY_SLOT_EJECT_METHOD, 2, AML_NOTSERIALIZED);
- {
- Aml *eject = aml_name(MEMORY_SLOT_EJECT);
-
- aml_append(method, aml_acquire(ctrl_lock, 0xFFFF));
- aml_append(method, aml_store(aml_to_integer(slot_arg0),
- slot_selector));
- aml_append(method, aml_store(one, eject));
- aml_append(method, aml_release(ctrl_lock));
- }
- aml_append(mem_ctrl_dev, method);
- }
- aml_append(pci_scope, mem_ctrl_dev);
- aml_append(ctx, pci_scope);
-}
diff --git a/hw/acpi/Makefile.objs b/hw/acpi/Makefile.objs
index 489e63b..834c63b 100644
--- a/hw/acpi/Makefile.objs
+++ b/hw/acpi/Makefile.objs
@@ -1,7 +1,7 @@
common-obj-$(CONFIG_ACPI_X86) += core.o piix4.o pcihp.o
common-obj-$(CONFIG_ACPI_X86_ICH) += ich9.o tco.o
common-obj-$(CONFIG_ACPI_CPU_HOTPLUG) += cpu_hotplug.o
-common-obj-$(CONFIG_ACPI_MEMORY_HOTPLUG) += memory_hotplug.o memory_hotplug_acpi_table.o
+common-obj-$(CONFIG_ACPI_MEMORY_HOTPLUG) += memory_hotplug.o
common-obj-$(CONFIG_ACPI_CPU_HOTPLUG) += cpu.o
common-obj-$(CONFIG_ACPI_NVDIMM) += nvdimm.o
common-obj-$(CONFIG_ACPI) += acpi_interface.o
--
MST
next prev parent reply other threads:[~2017-01-10 5:40 UTC|newest]
Thread overview: 65+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-01-10 5:39 [Qemu-devel] [PULL 00/41] virtio, vhost, pc: fixes, features Michael S. Tsirkin
2017-01-10 5:39 ` [Qemu-devel] [PULL 01/41] migration: allow to prioritize save state entries Michael S. Tsirkin
2017-01-10 5:39 ` [Qemu-devel] [PULL 02/41] intel_iommu: allow migration Michael S. Tsirkin
2017-01-10 5:39 ` [Qemu-devel] [PULL 03/41] virtio-crypto: fix possible integer and heap overflow Michael S. Tsirkin
2017-01-10 5:39 ` [Qemu-devel] [PULL 04/41] virtio: convert to use DMA api Michael S. Tsirkin
2017-01-18 11:59 ` Paolo Bonzini
2017-01-18 19:10 ` Michael S. Tsirkin
2017-01-19 9:05 ` Paolo Bonzini
2017-01-10 5:39 ` [Qemu-devel] [PULL 05/41] intel_iommu: name vtd address space with devfn Michael S. Tsirkin
2017-01-10 5:39 ` [Qemu-devel] [PULL 06/41] intel_iommu: allocate new key when creating new address space Michael S. Tsirkin
2017-01-10 5:39 ` [Qemu-devel] [PULL 07/41] exec: introduce address_space_get_iotlb_entry() Michael S. Tsirkin
2017-01-10 5:39 ` [Qemu-devel] [PULL 08/41] intel_iommu: support device iotlb descriptor Michael S. Tsirkin
2017-01-18 12:19 ` Paolo Bonzini
2017-01-19 2:50 ` Jason Wang
2017-01-19 3:28 ` Peter Xu
2017-01-19 3:35 ` Jason Wang
2017-01-19 3:32 ` Jason Wang
2017-01-19 9:07 ` Paolo Bonzini
2017-02-16 5:36 ` Liu, Yi L
2017-02-16 5:43 ` Jason Wang
2017-02-16 5:59 ` Jason Wang
2017-02-17 6:18 ` Liu, Yi L
2017-02-17 6:43 ` Jason Wang
2017-02-20 8:27 ` Liu, Yi L
2017-02-20 9:03 ` Jason Wang
2017-02-20 9:13 ` Liu, Yi L
2017-02-20 9:18 ` Jason Wang
2017-02-17 3:26 ` Peter Xu
2017-02-17 6:36 ` Liu, Yi L
2017-02-17 7:00 ` Peter Xu
2017-02-20 8:47 ` Liu, Yi L
2017-01-10 5:39 ` [Qemu-devel] [PULL 09/41] virtio-pci: address space translation service (ATS) support Michael S. Tsirkin
2017-01-10 5:39 ` [Qemu-devel] [PULL 10/41] acpi: add ATSR for q35 Michael S. Tsirkin
2017-01-10 5:39 ` [Qemu-devel] [PULL 11/41] memory: handle alias for iommu notifier Michael S. Tsirkin
2017-01-10 5:39 ` [Qemu-devel] [PULL 12/41] memory: handle alias in memory_region_is_iommu() Michael S. Tsirkin
2017-01-10 5:39 ` [Qemu-devel] [PULL 13/41] doc/pcie: correct command line examples Michael S. Tsirkin
2017-01-10 5:39 ` [Qemu-devel] [PULL 14/41] virtio-crypto: use the correct length for cipher operation Michael S. Tsirkin
2017-01-10 5:39 ` [Qemu-devel] [PULL 15/41] cryptodev: introduce a new is_used property Michael S. Tsirkin
2017-01-10 5:40 ` [Qemu-devel] [PULL 16/41] cryptodev: wrap the ready flag Michael S. Tsirkin
2017-01-10 5:40 ` [Qemu-devel] [PULL 17/41] virtio-crypto-pci: add check for cryptodev object Michael S. Tsirkin
2017-01-10 5:40 ` [Qemu-devel] [PULL 18/41] virtio-crypto: avoid one cryptodev device is used by multiple virtio crypto devices Michael S. Tsirkin
2017-01-10 5:40 ` [Qemu-devel] [PULL 19/41] virtio-crypto-pci: tag virtio-crypto device hot pluggable Michael S. Tsirkin
2017-01-10 5:40 ` [Qemu-devel] [PULL 20/41] virtio-crypto: zeroize the key material before free Michael S. Tsirkin
2017-01-10 5:40 ` [Qemu-devel] [PULL 21/41] pcie_aer: Convert pcie_aer_init to Error Michael S. Tsirkin
2017-01-10 5:40 ` [Qemu-devel] [PULL 22/41] pcie_aer: support configurable AER capa version Michael S. Tsirkin
2017-01-10 5:40 ` [Qemu-devel] [PULL 23/41] virtio: fix vq->inuse recalc after migr Michael S. Tsirkin
2017-01-10 5:40 ` [Qemu-devel] [PULL 24/41] balloon: Don't balloon roms Michael S. Tsirkin
2017-01-10 5:40 ` [Qemu-devel] [PULL 25/41] net: Add virtio queue interface to update used index from vring state Michael S. Tsirkin
2017-01-10 5:40 ` [Qemu-devel] [PULL 26/41] net: vhost stop updates virtio queue state Michael S. Tsirkin
2017-01-10 5:40 ` [Qemu-devel] [PULL 27/41] virtio: Introduce virtqueue_drop_all procedure Michael S. Tsirkin
2017-01-10 5:40 ` [Qemu-devel] [PULL 28/41] net: virtio-net discards TX data after link down Michael S. Tsirkin
2017-01-10 5:40 ` [Qemu-devel] [PULL 29/41] vhost-user: Add MTU protocol feature and op Michael S. Tsirkin
2017-01-10 5:40 ` [Qemu-devel] [PULL 30/41] vhost-net: Notify the backend about the host MTU Michael S. Tsirkin
2017-01-10 5:40 ` [Qemu-devel] [PULL 31/41] virtio-net: Add MTU feature support Michael S. Tsirkin
2017-01-10 5:40 ` [Qemu-devel] [PULL 32/41] tests: pc: add memory hotplug acpi tables tests Michael S. Tsirkin
2017-01-10 5:40 ` Michael S. Tsirkin [this message]
2017-01-10 5:40 ` [Qemu-devel] [PULL 34/41] memhp: move build_memory_devices() into memory_hotplug.c Michael S. Tsirkin
2017-01-10 5:40 ` [Qemu-devel] [PULL 35/41] memhp: consolidate scattered MHPD device declaration Michael S. Tsirkin
2017-01-10 5:40 ` [Qemu-devel] [PULL 36/41] memhp: merge build_memory_devices() into build_memory_hotplug_aml() Michael S. Tsirkin
2017-01-10 5:40 ` [Qemu-devel] [PULL 37/41] memhp: move GPE handler_E03 " Michael S. Tsirkin
2017-01-10 5:40 ` [Qemu-devel] [PULL 38/41] memhp: move memory hotplug only defines to memory_hotplug.c Michael S. Tsirkin
2017-01-10 5:41 ` [Qemu-devel] [PULL 39/41] memhp: don't generate memory hotplug AML if it's not enabled/supported Michael S. Tsirkin
2017-01-10 5:41 ` [Qemu-devel] [PULL 40/41] memhp: move DIMM devices into dedicated scope with related common methods Michael S. Tsirkin
2017-01-10 5:41 ` [Qemu-devel] [PULL 41/41] acpi-test: update expected files Michael S. Tsirkin
2017-01-10 14:52 ` [Qemu-devel] [PULL 00/41] virtio, vhost, pc: fixes, features Peter Maydell
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1484026704-28027-34-git-send-email-mst@redhat.com \
--to=mst@redhat.com \
--cc=imammedo@redhat.com \
--cc=marcel@redhat.com \
--cc=peter.maydell@linaro.org \
--cc=qemu-devel@nongnu.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).