From: "Michael S. Tsirkin" <mst@redhat.com>
To: qemu-devel@nongnu.org
Cc: Will Deacon <will.deacon@arm.com>,
virtualization@lists.linux-foundation.org, luto@kernel.org
Subject: [Qemu-devel] [PATCH 1/2] virtio_mmio: add standard header file
Date: Fri, 13 Jan 2017 00:17:25 +0200 [thread overview]
Message-ID: <1484259433-18188-1-git-send-email-mst@redhat.com> (raw)
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
---
include/standard-headers/linux/virtio_mmio.h | 141 +++++++++++++++++++++++++++
1 file changed, 141 insertions(+)
create mode 100644 include/standard-headers/linux/virtio_mmio.h
diff --git a/include/standard-headers/linux/virtio_mmio.h b/include/standard-headers/linux/virtio_mmio.h
new file mode 100644
index 0000000..c4b0968
--- /dev/null
+++ b/include/standard-headers/linux/virtio_mmio.h
@@ -0,0 +1,141 @@
+/*
+ * Virtio platform device driver
+ *
+ * Copyright 2011, ARM Ltd.
+ *
+ * Based on Virtio PCI driver by Anthony Liguori, copyright IBM Corp. 2007
+ *
+ * This header is BSD licensed so anyone can use the definitions to implement
+ * compatible drivers/servers.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * 3. Neither the name of IBM nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS'' AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED. IN NO EVENT SHALL IBM OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
+ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
+ * SUCH DAMAGE.
+ */
+
+#ifndef _LINUX_VIRTIO_MMIO_H
+#define _LINUX_VIRTIO_MMIO_H
+
+/*
+ * Control registers
+ */
+
+/* Magic value ("virt" string) - Read Only */
+#define VIRTIO_MMIO_MAGIC_VALUE 0x000
+
+/* Virtio device version - Read Only */
+#define VIRTIO_MMIO_VERSION 0x004
+
+/* Virtio device ID - Read Only */
+#define VIRTIO_MMIO_DEVICE_ID 0x008
+
+/* Virtio vendor ID - Read Only */
+#define VIRTIO_MMIO_VENDOR_ID 0x00c
+
+/* Bitmask of the features supported by the device (host)
+ * (32 bits per set) - Read Only */
+#define VIRTIO_MMIO_DEVICE_FEATURES 0x010
+
+/* Device (host) features set selector - Write Only */
+#define VIRTIO_MMIO_DEVICE_FEATURES_SEL 0x014
+
+/* Bitmask of features activated by the driver (guest)
+ * (32 bits per set) - Write Only */
+#define VIRTIO_MMIO_DRIVER_FEATURES 0x020
+
+/* Activated features set selector - Write Only */
+#define VIRTIO_MMIO_DRIVER_FEATURES_SEL 0x024
+
+
+#ifndef VIRTIO_MMIO_NO_LEGACY /* LEGACY DEVICES ONLY! */
+
+/* Guest's memory page size in bytes - Write Only */
+#define VIRTIO_MMIO_GUEST_PAGE_SIZE 0x028
+
+#endif
+
+
+/* Queue selector - Write Only */
+#define VIRTIO_MMIO_QUEUE_SEL 0x030
+
+/* Maximum size of the currently selected queue - Read Only */
+#define VIRTIO_MMIO_QUEUE_NUM_MAX 0x034
+
+/* Queue size for the currently selected queue - Write Only */
+#define VIRTIO_MMIO_QUEUE_NUM 0x038
+
+
+#ifndef VIRTIO_MMIO_NO_LEGACY /* LEGACY DEVICES ONLY! */
+
+/* Used Ring alignment for the currently selected queue - Write Only */
+#define VIRTIO_MMIO_QUEUE_ALIGN 0x03c
+
+/* Guest's PFN for the currently selected queue - Read Write */
+#define VIRTIO_MMIO_QUEUE_PFN 0x040
+
+#endif
+
+
+/* Ready bit for the currently selected queue - Read Write */
+#define VIRTIO_MMIO_QUEUE_READY 0x044
+
+/* Queue notifier - Write Only */
+#define VIRTIO_MMIO_QUEUE_NOTIFY 0x050
+
+/* Interrupt status - Read Only */
+#define VIRTIO_MMIO_INTERRUPT_STATUS 0x060
+
+/* Interrupt acknowledge - Write Only */
+#define VIRTIO_MMIO_INTERRUPT_ACK 0x064
+
+/* Device status register - Read Write */
+#define VIRTIO_MMIO_STATUS 0x070
+
+/* Selected queue's Descriptor Table address, 64 bits in two halves */
+#define VIRTIO_MMIO_QUEUE_DESC_LOW 0x080
+#define VIRTIO_MMIO_QUEUE_DESC_HIGH 0x084
+
+/* Selected queue's Available Ring address, 64 bits in two halves */
+#define VIRTIO_MMIO_QUEUE_AVAIL_LOW 0x090
+#define VIRTIO_MMIO_QUEUE_AVAIL_HIGH 0x094
+
+/* Selected queue's Used Ring address, 64 bits in two halves */
+#define VIRTIO_MMIO_QUEUE_USED_LOW 0x0a0
+#define VIRTIO_MMIO_QUEUE_USED_HIGH 0x0a4
+
+/* Configuration atomicity value */
+#define VIRTIO_MMIO_CONFIG_GENERATION 0x0fc
+
+/* The config space is defined by each driver as
+ * the per-driver configuration space - Read Write */
+#define VIRTIO_MMIO_CONFIG 0x100
+
+
+
+/*
+ * Interrupt flags (re: interrupt status & acknowledge registers)
+ */
+
+#define VIRTIO_MMIO_INT_VRING (1 << 0)
+#define VIRTIO_MMIO_INT_CONFIG (1 << 1)
+
+#endif
--
MST
next reply other threads:[~2017-01-12 22:17 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-01-12 22:17 Michael S. Tsirkin [this message]
2017-01-12 22:17 ` [Qemu-devel] [PATCH 2/2] virtio-mmio: switch to linux headers Michael S. Tsirkin
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1484259433-18188-1-git-send-email-mst@redhat.com \
--to=mst@redhat.com \
--cc=luto@kernel.org \
--cc=qemu-devel@nongnu.org \
--cc=virtualization@lists.linux-foundation.org \
--cc=will.deacon@arm.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).