* [Qemu-devel] [PATCH v6 1/2] move vm_start to cpus.c
2017-01-26 15:39 [Qemu-devel] [PATCH v6 0/2] Qemu: gdbstub: fix vCont Claudio Imbrenda
@ 2017-01-26 15:39 ` Claudio Imbrenda
2017-01-26 15:39 ` [Qemu-devel] [PATCH v6 2/2] gdbstub: Fix vCont behaviour Claudio Imbrenda
1 sibling, 0 replies; 3+ messages in thread
From: Claudio Imbrenda @ 2017-01-26 15:39 UTC (permalink / raw)
To: pbonzini; +Cc: borntraeger, qemu-devel, palves
This patch:
* moves vm_start to cpus.c .
* exports qemu_vmstop_requested, since it's needed by vm_start .
* extracts vm_prepare_start from vm_start; it does what vm_start did,
except restarting the cpus. vm_start now calls vm_prepare_start.
* moves the call to qemu_clock_enable away from resume_all_vcpus, and
add an explicit call to it before each instance of resume_all_vcpus
in the code.
Signed-off-by: Claudio Imbrenda <imbrenda@linux.vnet.ibm.com>
---
cpus.c | 42 ++++++++++++++++++++++++++++++++++++++++++
include/sysemu/sysemu.h | 2 ++
vl.c | 30 +-----------------------------
3 files changed, 45 insertions(+), 29 deletions(-)
diff --git a/cpus.c b/cpus.c
index 71a82e5..061de39 100644
--- a/cpus.c
+++ b/cpus.c
@@ -1578,6 +1578,48 @@ int vm_stop(RunState state)
return do_vm_stop(state);
}
+/**
+ * Prepare for (re)starting the VM.
+ * Returns -1 if the vCPUs are not to be restarted (e.g. if they are already
+ * running or in case of an error condition), 0 otherwise.
+ */
+int vm_prepare_start(void)
+{
+ RunState requested;
+ int res = 0;
+
+ qemu_vmstop_requested(&requested);
+ if (runstate_is_running() && requested == RUN_STATE__MAX) {
+ return -1;
+ }
+
+ /* Ensure that a STOP/RESUME pair of events is emitted if a
+ * vmstop request was pending. The BLOCK_IO_ERROR event, for
+ * example, according to documentation is always followed by
+ * the STOP event.
+ */
+ if (runstate_is_running()) {
+ qapi_event_send_stop(&error_abort);
+ res = -1;
+ } else {
+ replay_enable_events();
+ cpu_enable_ticks();
+ runstate_set(RUN_STATE_RUNNING);
+ vm_state_notify(1, RUN_STATE_RUNNING);
+ }
+
+ /* XXX: is it ok to send this even before actually resuming the CPUs? */
+ qapi_event_send_resume(&error_abort);
+ return res;
+}
+
+void vm_start(void)
+{
+ if (!vm_prepare_start()) {
+ resume_all_vcpus();
+ }
+}
+
/* does a state transition even if the VM is already stopped,
current state is forgotten forever */
int vm_stop_force_state(RunState state)
diff --git a/include/sysemu/sysemu.h b/include/sysemu/sysemu.h
index ff8ffb5..0bb0c40 100644
--- a/include/sysemu/sysemu.h
+++ b/include/sysemu/sysemu.h
@@ -37,6 +37,7 @@ void vm_state_notify(int running, RunState state);
#define VMRESET_REPORT true
void vm_start(void);
+int vm_prepare_start(void);
int vm_stop(RunState state);
int vm_stop_force_state(RunState state);
@@ -60,6 +61,7 @@ void qemu_register_powerdown_notifier(Notifier *notifier);
void qemu_system_debug_request(void);
void qemu_system_vmstop_request(RunState reason);
void qemu_system_vmstop_request_prepare(void);
+bool qemu_vmstop_requested(RunState *r);
int qemu_shutdown_requested_get(void);
int qemu_reset_requested_get(void);
void qemu_system_killed(int signal, pid_t pid);
diff --git a/vl.c b/vl.c
index abb0900..7a32a30 100644
--- a/vl.c
+++ b/vl.c
@@ -757,7 +757,7 @@ StatusInfo *qmp_query_status(Error **errp)
return info;
}
-static bool qemu_vmstop_requested(RunState *r)
+bool qemu_vmstop_requested(RunState *r)
{
qemu_mutex_lock(&vmstop_lock);
*r = vmstop_requested;
@@ -778,34 +778,6 @@ void qemu_system_vmstop_request(RunState state)
qemu_notify_event();
}
-void vm_start(void)
-{
- RunState requested;
-
- qemu_vmstop_requested(&requested);
- if (runstate_is_running() && requested == RUN_STATE__MAX) {
- return;
- }
-
- /* Ensure that a STOP/RESUME pair of events is emitted if a
- * vmstop request was pending. The BLOCK_IO_ERROR event, for
- * example, according to documentation is always followed by
- * the STOP event.
- */
- if (runstate_is_running()) {
- qapi_event_send_stop(&error_abort);
- } else {
- replay_enable_events();
- cpu_enable_ticks();
- runstate_set(RUN_STATE_RUNNING);
- vm_state_notify(1, RUN_STATE_RUNNING);
- resume_all_vcpus();
- }
-
- qapi_event_send_resume(&error_abort);
-}
-
-
/***********************************************************/
/* real time host monotonic timer */
--
1.9.1
^ permalink raw reply related [flat|nested] 3+ messages in thread* [Qemu-devel] [PATCH v6 2/2] gdbstub: Fix vCont behaviour
2017-01-26 15:39 [Qemu-devel] [PATCH v6 0/2] Qemu: gdbstub: fix vCont Claudio Imbrenda
2017-01-26 15:39 ` [Qemu-devel] [PATCH v6 1/2] move vm_start to cpus.c Claudio Imbrenda
@ 2017-01-26 15:39 ` Claudio Imbrenda
1 sibling, 0 replies; 3+ messages in thread
From: Claudio Imbrenda @ 2017-01-26 15:39 UTC (permalink / raw)
To: pbonzini; +Cc: borntraeger, qemu-devel, palves
When GDB issues a "vCont", QEMU was not handling it correctly when
multiple VCPUs are active.
For vCont, for each thread (VCPU), it can be specified whether to
single step, continue or stop that thread. The default is to stop a
thread.
However, when (for example) "vCont;s:2" is issued, all VCPUs continue
to run, although all but VCPU nr 2 are to be stopped.
This patch completely rewrites the vCont parsing code.
Please note that this improvement only works in system emulation mode,
when in userspace emulation mode the old behaviour is preserved.
Signed-off-by: Claudio Imbrenda <imbrenda@linux.vnet.ibm.com>
---
gdbstub.c | 187 +++++++++++++++++++++++++++++++++++++-------------
include/sysemu/cpus.h | 1 +
2 files changed, 141 insertions(+), 47 deletions(-)
diff --git a/gdbstub.c b/gdbstub.c
index de9b62b..eead8d2 100644
--- a/gdbstub.c
+++ b/gdbstub.c
@@ -386,6 +386,50 @@ static inline void gdb_continue(GDBState *s)
#endif
}
+/*
+ * Resume execution, per CPU actions. For user-mode emulation it's
+ * equivalent to gdb_continue.
+ */
+static int gdb_continue_partial(GDBState *s, char *newstates)
+{
+ int res = 0, flag = 0;
+#ifdef CONFIG_USER_ONLY
+ s->running_state = 1;
+#else
+ CPUState *cpu;
+
+ if (!runstate_needs_reset()) {
+ if (vm_prepare_start()) {
+ return 0;
+ }
+
+ CPU_FOREACH(cpu) {
+ switch (newstates[cpu_index(cpu) - 1]) {
+ case 0:
+ case 1:
+ break; /* nothing to do here */
+ case 's':
+ cpu_single_step(cpu, sstep_flags);
+ cpu_resume(cpu);
+ flag = 1;
+ break;
+ case 'c':
+ cpu_resume(cpu);
+ flag = 1;
+ break;
+ default:
+ res = -1;
+ break;
+ }
+ }
+ }
+ if (flag) {
+ qemu_clock_enable(QEMU_CLOCK_VIRTUAL, true);
+ }
+#endif
+ return res;
+}
+
static void put_buffer(GDBState *s, const uint8_t *buf, int len)
{
#ifdef CONFIG_USER_ONLY
@@ -784,6 +828,95 @@ static int is_query_packet(const char *p, const char *query, char separator)
(p[query_len] == '\0' || p[query_len] == separator);
}
+/**
+ * gdb_handle_vcont - Parses and handles a vCont packet.
+ * returns -ENOTSUP if a command is unsupported, -EINVAL or -ERANGE if there is
+ * a format error, 0 on success.
+ */
+static int gdb_handle_vcont(GDBState *s, const char *p)
+{
+ int res, idx, signal = 0;
+ char cur_action;
+ char *newstates;
+ unsigned long tmp;
+ CPUState *cpu;
+
+ /* uninitialised CPUs stay 0 */
+ newstates = g_new0(char, max_cpus);
+
+ /* mark valid CPUs with 1 */
+ CPU_FOREACH(cpu) {
+ newstates[cpu_index(cpu) - 1] = 1;
+ }
+
+ /*
+ * res keeps track of what error we are returning, with -1 meaning
+ * that the command is unknown or unsupported, and thus returning
+ * an empty packet, while -22 returns an E22 packet due to
+ * invalid or incorrect parameters passed.
+ */
+ res = 0;
+ while (*p) {
+ if (*p++ != ';') {
+ res = -ENOTSUP;
+ goto out;
+ }
+
+ cur_action = *p++;
+ if (cur_action == 'C' || cur_action == 'S') {
+ cur_action = tolower(cur_action);
+ res = qemu_strtoul(p + 1, &p, 16, &tmp);
+ if (res) {
+ goto out;
+ }
+ signal = gdb_signal_to_target(tmp);
+ } else if (cur_action != 'c' && cur_action != 's') {
+ /* unknown/invalid/unsupported command */
+ res = -ENOTSUP;
+ goto out;
+ }
+ /* thread specification. special values: (none), -1 = all; 0 = any */
+ if ((p[0] == ':' && p[1] == '-' && p[2] == '1') || (p[0] != ':')) {
+ if (*p == ':') {
+ p += 3;
+ }
+ for (idx = 0; idx < max_cpus; idx++) {
+ if (newstates[idx] == 1) {
+ newstates[idx] = cur_action;
+ }
+ }
+ } else if (*p == ':') {
+ p++;
+ res = qemu_strtoul(p, &p, 16, &tmp);
+ if (res) {
+ goto out;
+ }
+ idx = tmp;
+ /* 0 means any thread, so we pick the first valid CPU */
+ if (!idx) {
+ idx = cpu_index(first_cpu);
+ }
+
+ /* invalid CPU specified */
+ if (!idx || idx > max_cpus || !newstates[idx - 1]) {
+ res = -EINVAL;
+ goto out;
+ }
+ /* only use if no previous match occourred */
+ if (newstates[idx - 1] == 1) {
+ newstates[idx - 1] = cur_action;
+ }
+ }
+ }
+ s->signal = signal;
+ gdb_continue_partial(s, newstates);
+
+out:
+ g_free(newstates);
+
+ return res;
+}
+
static int gdb_handle_packet(GDBState *s, const char *line_buf)
{
CPUState *cpu;
@@ -829,60 +962,20 @@ static int gdb_handle_packet(GDBState *s, const char *line_buf)
return RS_IDLE;
case 'v':
if (strncmp(p, "Cont", 4) == 0) {
- int res_signal, res_thread;
-
p += 4;
if (*p == '?') {
put_packet(s, "vCont;c;C;s;S");
break;
}
- res = 0;
- res_signal = 0;
- res_thread = 0;
- while (*p) {
- int action, signal;
-
- if (*p++ != ';') {
- res = 0;
- break;
- }
- action = *p++;
- signal = 0;
- if (action == 'C' || action == 'S') {
- signal = gdb_signal_to_target(strtoul(p, (char **)&p, 16));
- if (signal == -1) {
- signal = 0;
- }
- } else if (action != 'c' && action != 's') {
- res = 0;
- break;
- }
- thread = 0;
- if (*p == ':') {
- thread = strtoull(p+1, (char **)&p, 16);
- }
- action = tolower(action);
- if (res == 0 || (res == 'c' && action == 's')) {
- res = action;
- res_signal = signal;
- res_thread = thread;
- }
- }
+
+ res = gdb_handle_vcont(s, p);
+
if (res) {
- if (res_thread != -1 && res_thread != 0) {
- cpu = find_cpu(res_thread);
- if (cpu == NULL) {
- put_packet(s, "E22");
- break;
- }
- s->c_cpu = cpu;
- }
- if (res == 's') {
- cpu_single_step(s->c_cpu, sstep_flags);
+ if ((res == -EINVAL) || (res == -ERANGE)) {
+ put_packet(s, "E22");
+ break;
}
- s->signal = res_signal;
- gdb_continue(s);
- return RS_IDLE;
+ goto unknown_command;
}
break;
} else {
diff --git a/include/sysemu/cpus.h b/include/sysemu/cpus.h
index 3728a1e..5fa074b 100644
--- a/include/sysemu/cpus.h
+++ b/include/sysemu/cpus.h
@@ -5,6 +5,7 @@
bool qemu_in_vcpu_thread(void);
void qemu_init_cpu_loop(void);
void resume_all_vcpus(void);
+void resume_some_vcpus(CPUState **cpus);
void pause_all_vcpus(void);
void cpu_stop_current(void);
void cpu_ticks_init(void);
--
1.9.1
^ permalink raw reply related [flat|nested] 3+ messages in thread