qemu-devel.nongnu.org archive mirror
 help / color / mirror / Atom feed
From: Peter Maydell <peter.maydell@linaro.org>
To: qemu-devel@nongnu.org
Subject: [Qemu-devel] [PULL 11/22] armv7m: add state for v7M CCR, CFSR, HFSR, DFSR, MMFAR, BFAR
Date: Fri, 27 Jan 2017 15:32:06 +0000	[thread overview]
Message-ID: <1485531137-2362-12-git-send-email-peter.maydell@linaro.org> (raw)
In-Reply-To: <1485531137-2362-1-git-send-email-peter.maydell@linaro.org>

Add the structure fields, VMState fields, reset code and macros for
the v7M system control registers CCR, CFSR, HFSR, DFSR, MMFAR and
BFAR.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 1485285380-10565-4-git-send-email-peter.maydell@linaro.org
---
 target/arm/cpu.h     | 54 ++++++++++++++++++++++++++++++++++++++++++++++++++++
 target/arm/cpu.c     |  7 +++++++
 target/arm/machine.c | 10 ++++++++--
 3 files changed, 69 insertions(+), 2 deletions(-)

diff --git a/target/arm/cpu.h b/target/arm/cpu.h
index b2cc329..4b062d2 100644
--- a/target/arm/cpu.h
+++ b/target/arm/cpu.h
@@ -21,6 +21,7 @@
 #define ARM_CPU_H
 
 #include "kvm-consts.h"
+#include "hw/registerfields.h"
 
 #if defined(TARGET_AARCH64)
   /* AArch64 definitions */
@@ -405,6 +406,12 @@ typedef struct CPUARMState {
         uint32_t vecbase;
         uint32_t basepri;
         uint32_t control;
+        uint32_t ccr; /* Configuration and Control */
+        uint32_t cfsr; /* Configurable Fault Status */
+        uint32_t hfsr; /* HardFault Status */
+        uint32_t dfsr; /* Debug Fault Status Register */
+        uint32_t mmfar; /* MemManage Fault Address */
+        uint32_t bfar; /* BusFault Address */
         int exception;
     } v7m;
 
@@ -1086,6 +1093,53 @@ enum arm_cpu_mode {
 #define ARM_IWMMXT_wCGR2	10
 #define ARM_IWMMXT_wCGR3	11
 
+/* V7M CCR bits */
+FIELD(V7M_CCR, NONBASETHRDENA, 0, 1)
+FIELD(V7M_CCR, USERSETMPEND, 1, 1)
+FIELD(V7M_CCR, UNALIGN_TRP, 3, 1)
+FIELD(V7M_CCR, DIV_0_TRP, 4, 1)
+FIELD(V7M_CCR, BFHFNMIGN, 8, 1)
+FIELD(V7M_CCR, STKALIGN, 9, 1)
+FIELD(V7M_CCR, DC, 16, 1)
+FIELD(V7M_CCR, IC, 17, 1)
+
+/* V7M CFSR bits for MMFSR */
+FIELD(V7M_CFSR, IACCVIOL, 0, 1)
+FIELD(V7M_CFSR, DACCVIOL, 1, 1)
+FIELD(V7M_CFSR, MUNSTKERR, 3, 1)
+FIELD(V7M_CFSR, MSTKERR, 4, 1)
+FIELD(V7M_CFSR, MLSPERR, 5, 1)
+FIELD(V7M_CFSR, MMARVALID, 7, 1)
+
+/* V7M CFSR bits for BFSR */
+FIELD(V7M_CFSR, IBUSERR, 8 + 0, 1)
+FIELD(V7M_CFSR, PRECISERR, 8 + 1, 1)
+FIELD(V7M_CFSR, IMPRECISERR, 8 + 2, 1)
+FIELD(V7M_CFSR, UNSTKERR, 8 + 3, 1)
+FIELD(V7M_CFSR, STKERR, 8 + 4, 1)
+FIELD(V7M_CFSR, LSPERR, 8 + 5, 1)
+FIELD(V7M_CFSR, BFARVALID, 8 + 7, 1)
+
+/* V7M CFSR bits for UFSR */
+FIELD(V7M_CFSR, UNDEFINSTR, 16 + 0, 1)
+FIELD(V7M_CFSR, INVSTATE, 16 + 1, 1)
+FIELD(V7M_CFSR, INVPC, 16 + 2, 1)
+FIELD(V7M_CFSR, NOCP, 16 + 3, 1)
+FIELD(V7M_CFSR, UNALIGNED, 16 + 8, 1)
+FIELD(V7M_CFSR, DIVBYZERO, 16 + 9, 1)
+
+/* V7M HFSR bits */
+FIELD(V7M_HFSR, VECTTBL, 1, 1)
+FIELD(V7M_HFSR, FORCED, 30, 1)
+FIELD(V7M_HFSR, DEBUGEVT, 31, 1)
+
+/* V7M DFSR bits */
+FIELD(V7M_DFSR, HALTED, 0, 1)
+FIELD(V7M_DFSR, BKPT, 1, 1)
+FIELD(V7M_DFSR, DWTTRAP, 2, 1)
+FIELD(V7M_DFSR, VCATCH, 3, 1)
+FIELD(V7M_DFSR, EXTERNAL, 4, 1)
+
 /* If adding a feature bit which corresponds to a Linux ELF
  * HWCAP bit, remember to update the feature-bit-to-hwcap
  * mapping in linux-user/elfload.c:get_elf_hwcap().
diff --git a/target/arm/cpu.c b/target/arm/cpu.c
index 6395d5a..c804f59 100644
--- a/target/arm/cpu.c
+++ b/target/arm/cpu.c
@@ -188,6 +188,13 @@ static void arm_cpu_reset(CPUState *s)
         uint8_t *rom;
 
         env->daif &= ~PSTATE_I;
+
+        /* The reset value of this bit is IMPDEF, but ARM recommends
+         * that it resets to 1, so QEMU always does that rather than making
+         * it dependent on CPU model.
+         */
+        env->v7m.ccr = R_V7M_CCR_STKALIGN_MASK;
+
         rom = rom_ptr(0);
         if (rom) {
             /* Address zero is covered by ROM which hasn't yet been
diff --git a/target/arm/machine.c b/target/arm/machine.c
index 8d93571..fa5ec76 100644
--- a/target/arm/machine.c
+++ b/target/arm/machine.c
@@ -99,13 +99,19 @@ static bool m_needed(void *opaque)
 
 static const VMStateDescription vmstate_m = {
     .name = "cpu/m",
-    .version_id = 2,
-    .minimum_version_id = 2,
+    .version_id = 3,
+    .minimum_version_id = 3,
     .needed = m_needed,
     .fields = (VMStateField[]) {
         VMSTATE_UINT32(env.v7m.vecbase, ARMCPU),
         VMSTATE_UINT32(env.v7m.basepri, ARMCPU),
         VMSTATE_UINT32(env.v7m.control, ARMCPU),
+        VMSTATE_UINT32(env.v7m.ccr, ARMCPU),
+        VMSTATE_UINT32(env.v7m.cfsr, ARMCPU),
+        VMSTATE_UINT32(env.v7m.hfsr, ARMCPU),
+        VMSTATE_UINT32(env.v7m.dfsr, ARMCPU),
+        VMSTATE_UINT32(env.v7m.mmfar, ARMCPU),
+        VMSTATE_UINT32(env.v7m.bfar, ARMCPU),
         VMSTATE_INT32(env.v7m.exception, ARMCPU),
         VMSTATE_END_OF_LIST()
     }
-- 
2.7.4

  parent reply	other threads:[~2017-01-27 15:32 UTC|newest]

Thread overview: 25+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2017-01-27 15:31 [Qemu-devel] [PULL 00/22] target-arm queue Peter Maydell
2017-01-27 15:31 ` [Qemu-devel] [PULL 01/22] aspeed/smc: handle dummy bytes when doing fast reads in command mode Peter Maydell
2017-01-27 15:31 ` [Qemu-devel] [PULL 02/22] armv7m: MRS/MSR: handle unprivileged access Peter Maydell
2017-01-27 15:31 ` [Qemu-devel] [PULL 03/22] armv7m: Replace armv7m.hack with unassigned_access handler Peter Maydell
2017-01-27 15:31 ` [Qemu-devel] [PULL 04/22] armv7m: Explicit error for bad vector table Peter Maydell
2017-01-27 15:32 ` [Qemu-devel] [PULL 05/22] hw/registerfields.h: Pull FIELD etc macros out of hw/register.h Peter Maydell
2017-01-27 15:32 ` [Qemu-devel] [PULL 06/22] armv7m: Fix reads of CONTROL register bit 1 Peter Maydell
2017-01-27 15:32 ` [Qemu-devel] [PULL 07/22] armv7m: Clear FAULTMASK on return from non-NMI exceptions Peter Maydell
2017-01-27 15:32 ` [Qemu-devel] [PULL 08/22] pflash_cfi01: fix per-device sector length in CFI table Peter Maydell
2017-01-27 15:32 ` [Qemu-devel] [PULL 09/22] target/arm: Drop IS_M() macro Peter Maydell
2017-01-27 15:32 ` [Qemu-devel] [PULL 10/22] armv7m_nvic: keep a pointer to the CPU Peter Maydell
2017-01-27 15:32 ` Peter Maydell [this message]
2017-01-27 15:32 ` [Qemu-devel] [PULL 12/22] armv7m: implement CCR, CFSR, HFSR, DFSR, BFAR, and MMFAR Peter Maydell
2017-01-27 15:32 ` [Qemu-devel] [PULL 13/22] armv7m: honour CCR.STACKALIGN on exception entry Peter Maydell
2017-01-27 15:32 ` [Qemu-devel] [PULL 14/22] armv7m: set CFSR.UNDEFINSTR on undefined instructions Peter Maydell
2017-01-27 15:32 ` [Qemu-devel] [PULL 15/22] armv7m: Report no-coprocessor faults correctly Peter Maydell
2017-01-27 15:32 ` [Qemu-devel] [PULL 16/22] armv7m: Honour CCR.USERSETMPEND Peter Maydell
2017-01-27 15:32 ` [Qemu-devel] [PULL 17/22] armv7m: FAULTMASK should be 0 on reset Peter Maydell
2017-01-27 15:32 ` [Qemu-devel] [PULL 18/22] armv7m: R14 should reset to 0xffffffff Peter Maydell
2017-01-27 15:32 ` [Qemu-devel] [PULL 19/22] arm: stellaris: make MII accesses complete immediately Peter Maydell
2017-01-27 15:32 ` [Qemu-devel] [PULL 20/22] hw/char/exynos4210_uart: Drop unused local variable frame_size Peter Maydell
2017-01-27 15:32 ` [Qemu-devel] [PULL 21/22] arm_gicv3: Fix broken logic in ELRSR calculation Peter Maydell
2017-01-27 15:32 ` [Qemu-devel] [PULL 22/22] dma: omap: check dma channel data_type Peter Maydell
2017-01-27 16:12 ` [Qemu-devel] [PULL 00/22] target-arm queue no-reply
2017-01-30 10:23 ` Peter Maydell

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1485531137-2362-12-git-send-email-peter.maydell@linaro.org \
    --to=peter.maydell@linaro.org \
    --cc=qemu-devel@nongnu.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).