From: Peter Maydell <peter.maydell@linaro.org>
To: qemu-devel@nongnu.org
Subject: [Qemu-devel] [PULL 04/22] armv7m: Explicit error for bad vector table
Date: Fri, 27 Jan 2017 15:31:59 +0000 [thread overview]
Message-ID: <1485531137-2362-5-git-send-email-peter.maydell@linaro.org> (raw)
In-Reply-To: <1485531137-2362-1-git-send-email-peter.maydell@linaro.org>
From: Michael Davidsaver <mdavidsaver@gmail.com>
Give an explicit error and abort when a load
from the vector table fails. Architecturally this
should HardFault (which will then immediately
fail to load the HardFault vector and go into Lockup).
Since we don't model Lockup, just report this guest
error via cpu_abort(). This is more helpful than the
previous behaviour of reading a zero, which is the
address of the reset stack pointer and not a sensible
location to jump to.
Signed-off-by: Michael Davidsaver <mdavidsaver@gmail.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 1484937883-1068-4-git-send-email-peter.maydell@linaro.org
[PMM: expanded commit message]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
target/arm/helper.c | 26 +++++++++++++++++++++++++-
1 file changed, 25 insertions(+), 1 deletion(-)
diff --git a/target/arm/helper.c b/target/arm/helper.c
index ad23de3..8edb08c 100644
--- a/target/arm/helper.c
+++ b/target/arm/helper.c
@@ -6014,6 +6014,30 @@ static void arm_log_exception(int idx)
}
}
+static uint32_t arm_v7m_load_vector(ARMCPU *cpu)
+
+{
+ CPUState *cs = CPU(cpu);
+ CPUARMState *env = &cpu->env;
+ MemTxResult result;
+ hwaddr vec = env->v7m.vecbase + env->v7m.exception * 4;
+ uint32_t addr;
+
+ addr = address_space_ldl(cs->as, vec,
+ MEMTXATTRS_UNSPECIFIED, &result);
+ if (result != MEMTX_OK) {
+ /* Architecturally this should cause a HardFault setting HSFR.VECTTBL,
+ * which would then be immediately followed by our failing to load
+ * the entry vector for that HardFault, which is a Lockup case.
+ * Since we don't model Lockup, we just report this guest error
+ * via cpu_abort().
+ */
+ cpu_abort(cs, "Failed to read from exception vector table "
+ "entry %08x\n", (unsigned)vec);
+ }
+ return addr;
+}
+
void arm_v7m_cpu_do_interrupt(CPUState *cs)
{
ARMCPU *cpu = ARM_CPU(cs);
@@ -6095,7 +6119,7 @@ void arm_v7m_cpu_do_interrupt(CPUState *cs)
/* Clear IT bits */
env->condexec_bits = 0;
env->regs[14] = lr;
- addr = ldl_phys(cs->as, env->v7m.vecbase + env->v7m.exception * 4);
+ addr = arm_v7m_load_vector(cpu);
env->regs[15] = addr & 0xfffffffe;
env->thumb = addr & 1;
}
--
2.7.4
next prev parent reply other threads:[~2017-01-27 15:32 UTC|newest]
Thread overview: 25+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-01-27 15:31 [Qemu-devel] [PULL 00/22] target-arm queue Peter Maydell
2017-01-27 15:31 ` [Qemu-devel] [PULL 01/22] aspeed/smc: handle dummy bytes when doing fast reads in command mode Peter Maydell
2017-01-27 15:31 ` [Qemu-devel] [PULL 02/22] armv7m: MRS/MSR: handle unprivileged access Peter Maydell
2017-01-27 15:31 ` [Qemu-devel] [PULL 03/22] armv7m: Replace armv7m.hack with unassigned_access handler Peter Maydell
2017-01-27 15:31 ` Peter Maydell [this message]
2017-01-27 15:32 ` [Qemu-devel] [PULL 05/22] hw/registerfields.h: Pull FIELD etc macros out of hw/register.h Peter Maydell
2017-01-27 15:32 ` [Qemu-devel] [PULL 06/22] armv7m: Fix reads of CONTROL register bit 1 Peter Maydell
2017-01-27 15:32 ` [Qemu-devel] [PULL 07/22] armv7m: Clear FAULTMASK on return from non-NMI exceptions Peter Maydell
2017-01-27 15:32 ` [Qemu-devel] [PULL 08/22] pflash_cfi01: fix per-device sector length in CFI table Peter Maydell
2017-01-27 15:32 ` [Qemu-devel] [PULL 09/22] target/arm: Drop IS_M() macro Peter Maydell
2017-01-27 15:32 ` [Qemu-devel] [PULL 10/22] armv7m_nvic: keep a pointer to the CPU Peter Maydell
2017-01-27 15:32 ` [Qemu-devel] [PULL 11/22] armv7m: add state for v7M CCR, CFSR, HFSR, DFSR, MMFAR, BFAR Peter Maydell
2017-01-27 15:32 ` [Qemu-devel] [PULL 12/22] armv7m: implement CCR, CFSR, HFSR, DFSR, BFAR, and MMFAR Peter Maydell
2017-01-27 15:32 ` [Qemu-devel] [PULL 13/22] armv7m: honour CCR.STACKALIGN on exception entry Peter Maydell
2017-01-27 15:32 ` [Qemu-devel] [PULL 14/22] armv7m: set CFSR.UNDEFINSTR on undefined instructions Peter Maydell
2017-01-27 15:32 ` [Qemu-devel] [PULL 15/22] armv7m: Report no-coprocessor faults correctly Peter Maydell
2017-01-27 15:32 ` [Qemu-devel] [PULL 16/22] armv7m: Honour CCR.USERSETMPEND Peter Maydell
2017-01-27 15:32 ` [Qemu-devel] [PULL 17/22] armv7m: FAULTMASK should be 0 on reset Peter Maydell
2017-01-27 15:32 ` [Qemu-devel] [PULL 18/22] armv7m: R14 should reset to 0xffffffff Peter Maydell
2017-01-27 15:32 ` [Qemu-devel] [PULL 19/22] arm: stellaris: make MII accesses complete immediately Peter Maydell
2017-01-27 15:32 ` [Qemu-devel] [PULL 20/22] hw/char/exynos4210_uart: Drop unused local variable frame_size Peter Maydell
2017-01-27 15:32 ` [Qemu-devel] [PULL 21/22] arm_gicv3: Fix broken logic in ELRSR calculation Peter Maydell
2017-01-27 15:32 ` [Qemu-devel] [PULL 22/22] dma: omap: check dma channel data_type Peter Maydell
2017-01-27 16:12 ` [Qemu-devel] [PULL 00/22] target-arm queue no-reply
2017-01-30 10:23 ` Peter Maydell
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1485531137-2362-5-git-send-email-peter.maydell@linaro.org \
--to=peter.maydell@linaro.org \
--cc=qemu-devel@nongnu.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).