qemu-devel.nongnu.org archive mirror
 help / color / mirror / Atom feed
From: Peter Maydell <peter.maydell@linaro.org>
To: qemu-devel@nongnu.org
Subject: [Qemu-devel] [PULL 01/12] target-arm: Add support for PMU register PMSELR_EL0
Date: Fri, 10 Feb 2017 18:07:51 +0000	[thread overview]
Message-ID: <1486750082-12324-2-git-send-email-peter.maydell@linaro.org> (raw)
In-Reply-To: <1486750082-12324-1-git-send-email-peter.maydell@linaro.org>

From: Wei Huang <wei@redhat.com>

This patch adds support for AArch64 register PMSELR_EL0. The existing
PMSELR definition is revised accordingly.

Signed-off-by: Wei Huang <wei@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
[PMM: Moved #ifndef CONFIG_USER_ONLY to cover new regdefs]
Message-id: 1486504171-26807-2-git-send-email-wei@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 target/arm/cpu.h    |  1 +
 target/arm/helper.c | 27 +++++++++++++++++++++------
 2 files changed, 22 insertions(+), 6 deletions(-)

diff --git a/target/arm/cpu.h b/target/arm/cpu.h
index c0b3832..7e609f7 100644
--- a/target/arm/cpu.h
+++ b/target/arm/cpu.h
@@ -309,6 +309,7 @@ typedef struct CPUARMState {
         uint32_t c9_pmovsr; /* perf monitor overflow status */
         uint32_t c9_pmxevtyper; /* perf monitor event type */
         uint32_t c9_pmuserenr; /* perf monitor user enable */
+        uint64_t c9_pmselr; /* perf monitor counter selection register */
         uint32_t c9_pminten; /* perf monitor interrupt enables */
         union { /* Memory attribute redirection */
             struct {
diff --git a/target/arm/helper.c b/target/arm/helper.c
index c23df1b..42803d4 100644
--- a/target/arm/helper.c
+++ b/target/arm/helper.c
@@ -975,6 +975,17 @@ static uint64_t pmccntr_read(CPUARMState *env, const ARMCPRegInfo *ri)
     return total_ticks - env->cp15.c15_ccnt;
 }
 
+static void pmselr_write(CPUARMState *env, const ARMCPRegInfo *ri,
+                         uint64_t value)
+{
+    /* The value of PMSELR.SEL affects the behavior of PMXEVTYPER and
+     * PMXEVCNTR. We allow [0..31] to be written to PMSELR here; in the
+     * meanwhile, we check PMSELR.SEL when PMXEVTYPER and PMXEVCNTR are
+     * accessed.
+     */
+    env->cp15.c9_pmselr = value & 0x1f;
+}
+
 static void pmccntr_write(CPUARMState *env, const ARMCPRegInfo *ri,
                         uint64_t value)
 {
@@ -1194,13 +1205,17 @@ static const ARMCPRegInfo v7_cp_reginfo[] = {
     /* Unimplemented so WI. */
     { .name = "PMSWINC", .cp = 15, .crn = 9, .crm = 12, .opc1 = 0, .opc2 = 4,
       .access = PL0_W, .accessfn = pmreg_access, .type = ARM_CP_NOP },
-    /* Since we don't implement any events, writing to PMSELR is UNPREDICTABLE.
-     * We choose to RAZ/WI.
-     */
-    { .name = "PMSELR", .cp = 15, .crn = 9, .crm = 12, .opc1 = 0, .opc2 = 5,
-      .access = PL0_RW, .type = ARM_CP_CONST, .resetvalue = 0,
-      .accessfn = pmreg_access },
 #ifndef CONFIG_USER_ONLY
+    { .name = "PMSELR", .cp = 15, .crn = 9, .crm = 12, .opc1 = 0, .opc2 = 5,
+      .access = PL0_RW, .type = ARM_CP_ALIAS,
+      .fieldoffset = offsetoflow32(CPUARMState, cp15.c9_pmselr),
+      .accessfn = pmreg_access, .writefn = pmselr_write,
+      .raw_writefn = raw_write},
+    { .name = "PMSELR_EL0", .state = ARM_CP_STATE_AA64,
+      .opc0 = 3, .opc1 = 3, .crn = 9, .crm = 12, .opc2 = 5,
+      .access = PL0_RW, .accessfn = pmreg_access,
+      .fieldoffset = offsetof(CPUARMState, cp15.c9_pmselr),
+      .writefn = pmselr_write, .raw_writefn = raw_write, },
     { .name = "PMCCNTR", .cp = 15, .crn = 9, .crm = 13, .opc1 = 0, .opc2 = 0,
       .access = PL0_RW, .resetvalue = 0, .type = ARM_CP_IO,
       .readfn = pmccntr_read, .writefn = pmccntr_write32,
-- 
2.7.4

  reply	other threads:[~2017-02-10 18:08 UTC|newest]

Thread overview: 16+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2017-02-10 18:07 [Qemu-devel] [PULL 00/12] target-arm queue Peter Maydell
2017-02-10 18:07 ` Peter Maydell [this message]
2017-02-10 18:07 ` [Qemu-devel] [PULL 02/12] target-arm: Add support for AArch64 PMU register PMXEVTYPER_EL0 Peter Maydell
2017-02-10 18:07 ` [Qemu-devel] [PULL 03/12] target-arm: Add support for PMU register PMINTENSET_EL1 Peter Maydell
2017-02-23 13:58   ` Aaron Lindsay
2017-02-23 14:49     ` Peter Maydell
2017-02-10 18:07 ` [Qemu-devel] [PULL 04/12] target-arm: Enable vPMU support under TCG mode Peter Maydell
2017-02-10 18:07 ` [Qemu-devel] [PULL 05/12] target-arm: Declare virtio-mmio as dma-coherent in dt Peter Maydell
2017-02-10 18:07 ` [Qemu-devel] [PULL 06/12] hw/arm/virt: Declare virtio-mmio as dma cache coherent in ACPI Peter Maydell
2017-02-10 18:07 ` [Qemu-devel] [PULL 07/12] hw/arm/virt: Declare fwcfg " Peter Maydell
2017-02-10 18:07 ` [Qemu-devel] [PULL 08/12] hw/arm/virt: Declare fwcfg as dma cache coherent in dt Peter Maydell
2017-02-10 18:07 ` [Qemu-devel] [PULL 09/12] aspeed: check for negative values returned by blk_getlength() Peter Maydell
2017-02-10 18:08 ` [Qemu-devel] [PULL 10/12] aspeed: remove useless comment on controller segment size Peter Maydell
2017-02-10 18:08 ` [Qemu-devel] [PULL 11/12] aspeed/smc: handle dummies only in fast read mode Peter Maydell
2017-02-10 18:08 ` [Qemu-devel] [PULL 12/12] aspeed/smc: use a modulo to check segment limits Peter Maydell
2017-02-13  9:30 ` [Qemu-devel] [PULL 00/12] target-arm queue Peter Maydell

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1486750082-12324-2-git-send-email-peter.maydell@linaro.org \
    --to=peter.maydell@linaro.org \
    --cc=qemu-devel@nongnu.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).