From: Markus Armbruster <armbru@redhat.com>
To: qemu-devel@nongnu.org
Cc: kwolf@redhat.com, mreitz@redhat.com, qemu-block@nongnu.org,
"John Snow" <jsnow@redhat.com>,
"Hervé Poussineau" <hpoussin@reactos.org>,
"Mark Cave-Ayland" <mark.cave-ayland@ilande.co.uk>
Subject: [Qemu-devel] [PATCH v3 8/8] hw: Drop superfluous special checks for orphaned -drive
Date: Wed, 15 Feb 2017 11:05:47 +0100 [thread overview]
Message-ID: <1487153147-11530-9-git-send-email-armbru@redhat.com> (raw)
In-Reply-To: <1487153147-11530-1-git-send-email-armbru@redhat.com>
We've traditionally rejected orphans here and there, but not
systematically. For instance, the sun4m machines have an onboard SCSI
HBA (bus=0), and have always rejected bus>0. Other machines with an
onboard SCSI HBA don't.
Commit a66c9dc made all orphans trigger a warning, and the previous
commit turned this into an error. The checks "here and there" are now
redundant. Drop them.
Note that the one in mips_jazz.c was wrong: it rejected bus > MAX_FD,
but MAX_FD is the number of floppy drives per bus.
Error messages change from
$ qemu-system-x86_64 -drive if=ide,bus=2
qemu-system-x86_64: Too many IDE buses defined (3 > 2)
$ qemu-system-mips64 -M magnum,accel=qtest -drive if=floppy,bus=2,id=fd1
qemu: too many floppy drives
$ qemu-system-sparc -M LX -drive if=scsi,bus=1
qemu: too many SCSI bus
to
$ qemu-system-x86_64 -drive if=ide,bus=2
qemu-system-x86_64: -drive if=ide,bus=2: machine type does not support if=ide,bus=2,unit=0
$ qemu-system-mips64 -M magnum,accel=qtest -drive if=floppy,bus=2,id=fd1
qemu-system-mips64: -drive if=floppy,bus=2,id=fd1: machine type does not support if=floppy,bus=2,unit=0
$ qemu-system-sparc -M LX -drive if=scsi,bus=1
qemu-system-sparc: -drive if=scsi,bus=1: machine type does not support if=scsi,bus=1,unit=0
Cc: John Snow <jsnow@redhat.com>
Cc: "Hervé Poussineau" <hpoussin@reactos.org>
Cc: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
---
hw/ide/core.c | 17 -----------------
hw/mips/mips_jazz.c | 4 ----
hw/sparc/sun4m.c | 5 -----
3 files changed, 26 deletions(-)
diff --git a/hw/ide/core.c b/hw/ide/core.c
index 43709e5..cfa5de6 100644
--- a/hw/ide/core.c
+++ b/hw/ide/core.c
@@ -2840,23 +2840,6 @@ const VMStateDescription vmstate_ide_bus = {
void ide_drive_get(DriveInfo **hd, int n)
{
int i;
- int highest_bus = drive_get_max_bus(IF_IDE) + 1;
- int max_devs = drive_get_max_devs(IF_IDE);
- int n_buses = max_devs ? (n / max_devs) : n;
-
- /*
- * Note: The number of actual buses available is not known.
- * We compute this based on the size of the DriveInfo* array, n.
- * If it is less than max_devs * <num_real_buses>,
- * We will stop looking for drives prematurely instead of overfilling
- * the array.
- */
-
- if (highest_bus > n_buses) {
- error_report("Too many IDE buses defined (%d > %d)",
- highest_bus, n_buses);
- exit(1);
- }
for (i = 0; i < n; i++) {
hd[i] = drive_get_by_index(IF_IDE, i);
diff --git a/hw/mips/mips_jazz.c b/hw/mips/mips_jazz.c
index 73f6c9f..1cef581 100644
--- a/hw/mips/mips_jazz.c
+++ b/hw/mips/mips_jazz.c
@@ -291,10 +291,6 @@ static void mips_jazz_init(MachineState *machine,
qdev_get_gpio_in(rc4030, 5), &esp_reset, &dma_enable);
/* Floppy */
- if (drive_get_max_bus(IF_FLOPPY) >= MAX_FD) {
- fprintf(stderr, "qemu: too many floppy drives\n");
- exit(1);
- }
for (n = 0; n < MAX_FD; n++) {
fds[n] = drive_get(IF_FLOPPY, 0, n);
}
diff --git a/hw/sparc/sun4m.c b/hw/sparc/sun4m.c
index f5b6efd..61416a6 100644
--- a/hw/sparc/sun4m.c
+++ b/hw/sparc/sun4m.c
@@ -989,11 +989,6 @@ static void sun4m_hw_init(const struct sun4m_hwdef *hwdef,
slavio_misc_init(hwdef->slavio_base, hwdef->aux1_base, hwdef->aux2_base,
slavio_irq[30], fdc_tc);
- if (drive_get_max_bus(IF_SCSI) > 0) {
- fprintf(stderr, "qemu: too many SCSI bus\n");
- exit(1);
- }
-
esp_init(hwdef->esp_base, 2,
espdma_memory_read, espdma_memory_write,
espdma, espdma_irq, &esp_reset, &dma_enable);
--
2.7.4
next prev parent reply other threads:[~2017-02-15 10:06 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-02-15 10:05 [Qemu-devel] [PATCH v3 0/8] More sensible default for -drive interface type Markus Armbruster
2017-02-15 10:05 ` [Qemu-devel] [PATCH v3 1/8] hw: Default -drive to if=ide explicitly where it works Markus Armbruster
2017-02-15 10:05 ` [Qemu-devel] [PATCH v3 2/8] hw/arm/cubieboard hw/arm/xlnx-ep108: Fix units_per_default_bus Markus Armbruster
2017-02-15 10:05 ` [Qemu-devel] [PATCH v3 3/8] hw: Default -drive to if=none instead of ide when ide cannot work Markus Armbruster
2017-02-15 10:05 ` [Qemu-devel] [PATCH v3 4/8] hw: Default -drive to if=none instead of scsi when scsi " Markus Armbruster
2017-02-15 10:05 ` [Qemu-devel] [PATCH v3 5/8] hw/arm/highbank: Default -drive to if=ide instead of if=scsi Markus Armbruster
2017-02-15 10:05 ` [Qemu-devel] [PATCH v3 6/8] blockdev: Improve message for orphaned -drive Markus Armbruster
2017-02-15 10:05 ` [Qemu-devel] [PATCH v3 7/8] blockdev: Make orphaned -drive fatal Markus Armbruster
2017-02-16 21:29 ` [Qemu-devel] [Qemu-block] " John Snow
2017-02-15 10:05 ` Markus Armbruster [this message]
2017-02-15 20:32 ` [Qemu-devel] [PATCH v3 8/8] hw: Drop superfluous special checks for orphaned -drive John Snow
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1487153147-11530-9-git-send-email-armbru@redhat.com \
--to=armbru@redhat.com \
--cc=hpoussin@reactos.org \
--cc=jsnow@redhat.com \
--cc=kwolf@redhat.com \
--cc=mark.cave-ayland@ilande.co.uk \
--cc=mreitz@redhat.com \
--cc=qemu-block@nongnu.org \
--cc=qemu-devel@nongnu.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).