From: Nikunj A Dadhania <nikunj@linux.vnet.ibm.com>
To: qemu-ppc@nongnu.org, david@gibson.dropbear.id.au, rth@twiddle.net
Cc: qemu-devel@nongnu.org, bharata@linux.vnet.ibm.com,
nikunj@linux.vnet.ibm.com
Subject: [Qemu-devel] [PATCH v1 01/10] target/ppc: support for 32-bit carry and overflow
Date: Mon, 20 Feb 2017 15:41:52 +0530 [thread overview]
Message-ID: <1487585521-19445-2-git-send-email-nikunj@linux.vnet.ibm.com> (raw)
In-Reply-To: <1487585521-19445-1-git-send-email-nikunj@linux.vnet.ibm.com>
POWER ISA 3.0 adds CA32 and OV32 status in 64-bit mode. Add the flags
and corresponding defines.
Moreover, CA32 is updated when CA is updated and OV32 is updated when OV
is updated.
Arithmetic instructions:
* Addition and Substractions:
addic, addic., subfic, addc, subfc, adde, subfe, addme, subfme,
addze, and subfze always updates CA and CA32.
=> CA reflects the carry out of bit 0 in 64-bit mode and out of
bit 32 in 32-bit mode.
=> CA32 reflects the carry out of bit 32 independent of the
mode.
=> SO and OV reflects overflow of the 64-bit result in 64-bit
mode and overflow of the low-order 32-bit result in 32-bit
mode
=> OV32 reflects overflow of the low-order 32-bit independent of
the mode
* Multiply Low and Divide:
For mulld, divd, divde, divdu and divdeu: SO, OV, and OV32 bits
reflects overflow of the 64-bit result
For mullw, divw, divwe, divwu and divweu: SO, OV, and OV32 bits
reflects overflow of the 32-bit result
* Negate with OE=1 (nego)
For 64-bit mode if the register RA contains
0x8000_0000_0000_0000, OV and OV32 are set to 1.
For 32-bit mode if the register RA contains 0x8000_0000, OV and
OV32 are set to 1.
Signed-off-by: Nikunj A Dadhania <nikunj@linux.vnet.ibm.com>
---
target/ppc/cpu.h | 30 ++++++++++++++++++++++++++++++
target/ppc/translate.c | 17 ++++++++++++++++-
2 files changed, 46 insertions(+), 1 deletion(-)
diff --git a/target/ppc/cpu.h b/target/ppc/cpu.h
index 425e79d..ef392f0 100644
--- a/target/ppc/cpu.h
+++ b/target/ppc/cpu.h
@@ -965,6 +965,8 @@ struct CPUPPCState {
target_ulong so;
target_ulong ov;
target_ulong ca;
+ target_ulong ov32;
+ target_ulong ca32;
/* Reservation address */
target_ulong reserve_addr;
/* Reservation value */
@@ -1372,11 +1374,15 @@ int ppc_compat_max_threads(PowerPCCPU *cpu);
#define XER_SO 31
#define XER_OV 30
#define XER_CA 29
+#define XER_OV32 19
+#define XER_CA32 18
#define XER_CMP 8
#define XER_BC 0
#define xer_so (env->so)
#define xer_ov (env->ov)
#define xer_ca (env->ca)
+#define xer_ov32 (env->ov)
+#define xer_ca32 (env->ca)
#define xer_cmp ((env->xer >> XER_CMP) & 0xFF)
#define xer_bc ((env->xer >> XER_BC) & 0x7F)
@@ -2343,11 +2349,21 @@ enum {
/*****************************************************************************/
+#ifndef TARGET_PPC64
static inline target_ulong cpu_read_xer(CPUPPCState *env)
{
return env->xer | (env->so << XER_SO) | (env->ov << XER_OV) | (env->ca << XER_CA);
}
+#else
+static inline target_ulong cpu_read_xer(CPUPPCState *env)
+{
+ return env->xer | (env->so << XER_SO) |
+ (env->ov << XER_OV) | (env->ca << XER_CA) |
+ (env->ov32 << XER_OV32) | (env->ca32 << XER_CA32);
+}
+#endif
+#ifndef TARGET_PPC64
static inline void cpu_write_xer(CPUPPCState *env, target_ulong xer)
{
env->so = (xer >> XER_SO) & 1;
@@ -2355,6 +2371,20 @@ static inline void cpu_write_xer(CPUPPCState *env, target_ulong xer)
env->ca = (xer >> XER_CA) & 1;
env->xer = xer & ~((1u << XER_SO) | (1u << XER_OV) | (1u << XER_CA));
}
+#else
+static inline void cpu_write_xer(CPUPPCState *env, target_ulong xer)
+{
+ env->so = (xer >> XER_SO) & 1;
+ env->ov = (xer >> XER_OV) & 1;
+ env->ca = (xer >> XER_CA) & 1;
+ env->ov32 = (xer >> XER_OV32) & 1;
+ env->ca32 = (xer >> XER_CA32) & 1;
+ env->xer = xer & ~((1ul << XER_SO) |
+ (1ul << XER_OV) | (1ul << XER_CA) |
+ (1ul << XER_OV32) | (1ul << XER_CA32));
+}
+#endif
+
static inline void cpu_get_tb_cpu_state(CPUPPCState *env, target_ulong *pc,
target_ulong *cs_base, uint32_t *flags)
diff --git a/target/ppc/translate.c b/target/ppc/translate.c
index 3ba2616..498b095 100644
--- a/target/ppc/translate.c
+++ b/target/ppc/translate.c
@@ -71,7 +71,7 @@ static TCGv cpu_lr;
#if defined(TARGET_PPC64)
static TCGv cpu_cfar;
#endif
-static TCGv cpu_xer, cpu_so, cpu_ov, cpu_ca;
+static TCGv cpu_xer, cpu_so, cpu_ov, cpu_ca, cpu_ov32, cpu_ca32;
static TCGv cpu_reserve;
static TCGv cpu_fpscr;
static TCGv_i32 cpu_access_type;
@@ -173,6 +173,10 @@ void ppc_translate_init(void)
offsetof(CPUPPCState, ov), "OV");
cpu_ca = tcg_global_mem_new(cpu_env,
offsetof(CPUPPCState, ca), "CA");
+ cpu_ov32 = tcg_global_mem_new(cpu_env,
+ offsetof(CPUPPCState, ov32), "OV32");
+ cpu_ca32 = tcg_global_mem_new(cpu_env,
+ offsetof(CPUPPCState, ca32), "CA32");
cpu_reserve = tcg_global_mem_new(cpu_env,
offsetof(CPUPPCState, reserve_addr),
@@ -3715,6 +3719,12 @@ static void gen_read_xer(TCGv dst)
tcg_gen_or_tl(t0, t0, t1);
tcg_gen_or_tl(dst, dst, t2);
tcg_gen_or_tl(dst, dst, t0);
+#ifdef TARGET_PPC64
+ tcg_gen_shli_tl(t0, cpu_ov32, XER_OV32);
+ tcg_gen_or_tl(dst, dst, t0);
+ tcg_gen_shli_tl(t0, cpu_ca32, XER_CA32);
+ tcg_gen_or_tl(dst, dst, t0);
+#endif
tcg_temp_free(t0);
tcg_temp_free(t1);
tcg_temp_free(t2);
@@ -3727,9 +3737,14 @@ static void gen_write_xer(TCGv src)
tcg_gen_shri_tl(cpu_so, src, XER_SO);
tcg_gen_shri_tl(cpu_ov, src, XER_OV);
tcg_gen_shri_tl(cpu_ca, src, XER_CA);
+ tcg_gen_shri_tl(cpu_ov32, src, XER_OV32);
+ tcg_gen_shri_tl(cpu_ca32, src, XER_CA32);
tcg_gen_andi_tl(cpu_so, cpu_so, 1);
tcg_gen_andi_tl(cpu_ov, cpu_ov, 1);
tcg_gen_andi_tl(cpu_ca, cpu_ca, 1);
+ tcg_gen_andi_tl(cpu_ov32, cpu_ov32, 1);
+ tcg_gen_andi_tl(cpu_ca32, cpu_ca32, 1);
+
}
/* mcrxr */
--
2.7.4
next prev parent reply other threads:[~2017-02-20 10:14 UTC|newest]
Thread overview: 30+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-02-20 10:11 [Qemu-devel] [PATCH v1 00/10] POWER9 TCG enablements - part15 Nikunj A Dadhania
2017-02-20 10:11 ` Nikunj A Dadhania [this message]
2017-02-20 19:28 ` [Qemu-devel] [PATCH v1 01/10] target/ppc: support for 32-bit carry and overflow Richard Henderson
2017-02-21 4:45 ` Nikunj A Dadhania
2017-02-22 2:27 ` David Gibson
2017-02-20 10:11 ` [Qemu-devel] [PATCH v1 02/10] target/ppc: Update ca32 in arithmetic add Nikunj A Dadhania
2017-02-20 19:32 ` Richard Henderson
2017-02-20 10:11 ` [Qemu-devel] [PATCH v1 03/10] target/ppc: move subf logic block Nikunj A Dadhania
2017-02-20 19:34 ` Richard Henderson
2017-02-20 10:11 ` [Qemu-devel] [PATCH v1 04/10] target/ppc: compute ca32 for arithmetic substract Nikunj A Dadhania
2017-02-20 19:38 ` Richard Henderson
2017-02-20 10:11 ` [Qemu-devel] [PATCH v1 05/10] target/ppc: update overflow flags for add/sub Nikunj A Dadhania
2017-02-20 19:39 ` Richard Henderson
2017-02-21 9:22 ` Nikunj A Dadhania
2017-02-20 10:11 ` [Qemu-devel] [PATCH v1 06/10] target/ppc: use tcg ops for neg instruction Nikunj A Dadhania
2017-02-20 19:54 ` Richard Henderson
2017-02-21 9:23 ` Nikunj A Dadhania
2017-02-20 10:11 ` [Qemu-devel] [PATCH v1 07/10] target/ppc: update ov/ov32 for nego Nikunj A Dadhania
2017-02-20 19:55 ` Richard Henderson
2017-02-21 9:26 ` Nikunj A Dadhania
2017-02-21 19:56 ` Richard Henderson
2017-02-22 3:53 ` Nikunj A Dadhania
2017-02-22 10:17 ` Richard Henderson
2017-02-22 10:23 ` Nikunj A Dadhania
2017-02-20 10:11 ` [Qemu-devel] [PATCH v1 08/10] target/ppc: add ov32 flag for multiply low insns Nikunj A Dadhania
2017-02-20 19:59 ` Richard Henderson
2017-02-20 10:12 ` [Qemu-devel] [PATCH v1 09/10] target/ppc: add ov32 flag in divide operations Nikunj A Dadhania
2017-02-20 20:00 ` Richard Henderson
2017-02-20 10:12 ` [Qemu-devel] [PATCH v1 10/10] target/ppc: add mcrxrx instruction Nikunj A Dadhania
2017-02-20 20:06 ` Richard Henderson
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1487585521-19445-2-git-send-email-nikunj@linux.vnet.ibm.com \
--to=nikunj@linux.vnet.ibm.com \
--cc=bharata@linux.vnet.ibm.com \
--cc=david@gibson.dropbear.id.au \
--cc=qemu-devel@nongnu.org \
--cc=qemu-ppc@nongnu.org \
--cc=rth@twiddle.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).