From: Peter Maydell <peter.maydell@linaro.org>
To: qemu-devel@nongnu.org
Subject: [Qemu-devel] [PULL 23/30] armv7m: Raise correct kind of UsageFault for attempts to execute ARM code
Date: Mon, 27 Feb 2017 18:04:52 +0000 [thread overview]
Message-ID: <1488218699-31035-24-git-send-email-peter.maydell@linaro.org> (raw)
In-Reply-To: <1488218699-31035-1-git-send-email-peter.maydell@linaro.org>
M profile doesn't implement ARM, and the architecturally required
behaviour for attempts to execute with the Thumb bit clear is to
generate a UsageFault with the CFSR INVSTATE bit set. We were
incorrectly implementing this as generating an UNDEFINSTR UsageFault;
fix this.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
---
target/arm/cpu.h | 1 +
linux-user/main.c | 1 +
target/arm/helper.c | 4 ++++
target/arm/translate.c | 8 ++++++--
4 files changed, 12 insertions(+), 2 deletions(-)
diff --git a/target/arm/cpu.h b/target/arm/cpu.h
index 045830a..9e7b2df 100644
--- a/target/arm/cpu.h
+++ b/target/arm/cpu.h
@@ -57,6 +57,7 @@
#define EXCP_VFIQ 15
#define EXCP_SEMIHOST 16 /* semihosting call */
#define EXCP_NOCP 17 /* v7M NOCP UsageFault */
+#define EXCP_INVSTATE 18 /* v7M INVSTATE UsageFault */
#define ARMV7M_EXCP_RESET 1
#define ARMV7M_EXCP_NMI 2
diff --git a/linux-user/main.c b/linux-user/main.c
index 9645122..10a3bb3 100644
--- a/linux-user/main.c
+++ b/linux-user/main.c
@@ -574,6 +574,7 @@ void cpu_loop(CPUARMState *env)
switch(trapnr) {
case EXCP_UDEF:
case EXCP_NOCP:
+ case EXCP_INVSTATE:
{
TaskState *ts = cs->opaque;
uint32_t opcode;
diff --git a/target/arm/helper.c b/target/arm/helper.c
index 9081771..3f4211b 100644
--- a/target/arm/helper.c
+++ b/target/arm/helper.c
@@ -6245,6 +6245,10 @@ void arm_v7m_cpu_do_interrupt(CPUState *cs)
armv7m_nvic_set_pending(env->nvic, ARMV7M_EXCP_USAGE);
env->v7m.cfsr |= R_V7M_CFSR_NOCP_MASK;
break;
+ case EXCP_INVSTATE:
+ armv7m_nvic_set_pending(env->nvic, ARMV7M_EXCP_USAGE);
+ env->v7m.cfsr |= R_V7M_CFSR_INVSTATE_MASK;
+ break;
case EXCP_SWI:
/* The PC already points to the next instruction. */
armv7m_nvic_set_pending(env->nvic, ARMV7M_EXCP_SVC);
diff --git a/target/arm/translate.c b/target/arm/translate.c
index abc1f77..b859f10 100644
--- a/target/arm/translate.c
+++ b/target/arm/translate.c
@@ -7990,9 +7990,13 @@ static void disas_arm_insn(DisasContext *s, unsigned int insn)
TCGv_i32 addr;
TCGv_i64 tmp64;
- /* M variants do not implement ARM mode. */
+ /* M variants do not implement ARM mode; this must raise the INVSTATE
+ * UsageFault exception.
+ */
if (arm_dc_feature(s, ARM_FEATURE_M)) {
- goto illegal_op;
+ gen_exception_insn(s, 4, EXCP_INVSTATE, syn_uncategorized(),
+ default_exception_el(s));
+ return;
}
cond = insn >> 28;
if (cond == 0xf){
--
2.7.4
next prev parent reply other threads:[~2017-02-27 18:05 UTC|newest]
Thread overview: 33+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-02-27 18:04 [Qemu-devel] [PULL 00/30] target-arm queue Peter Maydell
2017-02-27 18:04 ` [Qemu-devel] [PULL 01/30] target-arm: Implement BCM2835 hardware RNG Peter Maydell
2017-02-27 18:04 ` [Qemu-devel] [PULL 02/30] bcm2835_rng: Use qcrypto_random_bytes() rather than rand() Peter Maydell
2017-02-27 18:04 ` [Qemu-devel] [PULL 03/30] sd: sdhci: mask transfer mode register value Peter Maydell
2017-02-27 18:04 ` [Qemu-devel] [PULL 04/30] sd: sdhci: check transfer mode register in multi block transfer Peter Maydell
2017-02-27 18:04 ` [Qemu-devel] [PULL 05/30] sd: sdhci: conditionally invoke " Peter Maydell
2017-02-27 18:04 ` [Qemu-devel] [PULL 06/30] sd: sdhci: Remove block count enable check in single block transfers Peter Maydell
2017-02-27 18:04 ` [Qemu-devel] [PULL 07/30] hw/arm/virt: fix cpu object reference leak Peter Maydell
2017-02-27 18:04 ` [Qemu-devel] [PULL 08/30] Add missing fp_access_check() to aarch64 crypto instructions Peter Maydell
2017-02-27 18:04 ` [Qemu-devel] [PULL 09/30] cputlb: Don't assume do_unassigned_access() never returns Peter Maydell
2017-02-27 18:04 ` [Qemu-devel] [PULL 10/30] hw/arm/virt: Add a user option to disallow ITS instantiation Peter Maydell
2017-02-27 18:04 ` [Qemu-devel] [PULL 11/30] ARM i.MX timers: fix reset handling Peter Maydell
2017-02-27 18:04 ` [Qemu-devel] [PULL 12/30] armv7m: Rename nvic_state to NVICState Peter Maydell
2017-02-27 18:04 ` [Qemu-devel] [PULL 13/30] armv7m: Implement reading and writing of PRIGROUP Peter Maydell
2017-02-27 18:04 ` [Qemu-devel] [PULL 14/30] armv7m: Rewrite NVIC to not use any GIC code Peter Maydell
2017-02-27 18:04 ` [Qemu-devel] [PULL 15/30] armv7m: Fix condition check for taking exceptions Peter Maydell
2017-02-27 18:04 ` [Qemu-devel] [PULL 16/30] arm: gic: Remove references to NVIC Peter Maydell
2017-02-27 18:04 ` [Qemu-devel] [PULL 17/30] armv7m: Escalate exceptions to HardFault if necessary Peter Maydell
2017-02-27 18:04 ` [Qemu-devel] [PULL 18/30] armv7m: Remove unused armv7m_nvic_acknowledge_irq() return value Peter Maydell
2017-02-27 18:04 ` [Qemu-devel] [PULL 19/30] armv7m: Simpler and faster exception start Peter Maydell
2017-02-27 18:04 ` [Qemu-devel] [PULL 20/30] armv7m: VECTCLRACTIVE and VECTRESET are UNPREDICTABLE Peter Maydell
2017-02-27 18:04 ` [Qemu-devel] [PULL 21/30] armv7m: Extract "exception taken" code into functions Peter Maydell
2017-02-27 18:04 ` [Qemu-devel] [PULL 22/30] armv7m: Check exception return consistency Peter Maydell
2017-02-27 18:04 ` Peter Maydell [this message]
2017-02-27 18:04 ` [Qemu-devel] [PULL 24/30] armv7m: Allow SHCSR writes to change pending and active bits Peter Maydell
2017-02-27 18:04 ` [Qemu-devel] [PULL 25/30] bcm2835_sdhost: add bcm2835 sdhost controller Peter Maydell
2017-02-27 18:04 ` [Qemu-devel] [PULL 26/30] hw/sd: add card-reparenting function Peter Maydell
2017-02-27 18:04 ` [Qemu-devel] [PULL 27/30] bcm2835_gpio: add bcm2835 gpio controller Peter Maydell
2017-02-27 18:04 ` [Qemu-devel] [PULL 28/30] bcm2835: add sdhost and gpio controllers Peter Maydell
2017-02-27 18:04 ` [Qemu-devel] [PULL 29/30] hw/arm/exynos: Fix Linux kernel division by zero for PLLs Peter Maydell
2017-02-27 18:04 ` [Qemu-devel] [PULL 30/30] hw/arm/exynos: Fix proper mapping of CPUs by providing real cluster ID Peter Maydell
2017-02-27 19:14 ` [Qemu-devel] [PULL 00/30] target-arm queue no-reply
2017-02-28 12:07 ` Peter Maydell
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1488218699-31035-24-git-send-email-peter.maydell@linaro.org \
--to=peter.maydell@linaro.org \
--cc=qemu-devel@nongnu.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).