[Qemu-devel] [Qemu-devel RFC v2 0/4] Add support for Smartfusion2 SoC

[Subbaraya Sundeep <sundeep.lkml@gmail.com>]

Hi Qemu-devel,

I am trying to add Smartfusion2 SoC.
SoC is from Microsemi and System on Module(SOM)
board is from Emcraft systems. Smartfusion2 has hardened
Microcontroller(Cortex-M3)based Sub System and FPGA fabric.
At the moment only system timer, sysreg and SPI
controller are modelled.

Testing:
./arm-softmmu/qemu-system-arm -M smartfusion2-som -serial mon:stdio \
-kernel u-boot.bin -display none -drive file=spi.bin,if=mtd,format=raw

U-boot is from Emcraft with modified SPI driver not to use PDMA.
Linux is 4.5 linux with Smartfusion2 SoC dts and clocksource 
driver added by myself @
https://github.com/Subbaraya-Sundeep/linux.git

Baremetal elfs from Microsemi Softconsole IDE are also working.

Changes from v1:
    Added SPI controller.

Thanks,
Sundeep

Subbaraya Sundeep (4):
  msf2: Add Smartfusion2 System timer
  msf2: Microsemi Smartfusion2 System Register block.
  msf2: Add Smartfusion2 SPI controller
  msf2: Add Emcraft's Smartfusion2 SOM kit.

 default-configs/arm-softmmu.mak |   1 +
 hw/arm/Makefile.objs            |   2 +-
 hw/arm/msf2_soc.c               | 141 +++++++++++++
 hw/misc/Makefile.objs           |   1 +
 hw/misc/msf2_sysreg.c           | 168 +++++++++++++++
 hw/ssi/Makefile.objs            |   1 +
 hw/ssi/msf2_spi.c               | 449 ++++++++++++++++++++++++++++++++++++++++
 hw/timer/Makefile.objs          |   1 +
 hw/timer/msf2_timer.c           | 273 ++++++++++++++++++++++++
 9 files changed, 1036 insertions(+), 1 deletion(-)
 create mode 100644 hw/arm/msf2_soc.c
 create mode 100644 hw/misc/msf2_sysreg.c
 create mode 100644 hw/ssi/msf2_spi.c
 create mode 100644 hw/timer/msf2_timer.c

-- 
2.5.0