[Qemu-devel] [PULL 00/24] target-arm queue

[Qemu-devel] [PULL 00/24] target-arm queue

[Peter Maydell]

First ARM pullreq of the 2.10 cycle...

thanks
-- PMM

The following changes since commit 64c8ed97cceabac4fafe17fca8d88ef08183f439:

  Open 2.10 development tree (2017-04-20 15:42:31 +0100)

are available in the git repository at:

  git://git.linaro.org/people/pmaydell/qemu-arm.git tags/pull-target-arm-20170420

for you to fetch changes up to f4e8e4edda875cab9df91dc4ae9767f7cb1f50aa:

  arm: Remove workarounds for old M-profile exception return implementation (2017-04-20 17:39:17 +0100)

----------------------------------------------------------------
target-arm queue:
 * implement M profile exception return properly
 * cadence GEM: fix multiqueue handling bugs
 * pxa2xx.c: QOMify a device
 * arm/kvm: Remove trailing newlines from error_report()
 * stellaris: Don't hw_error() on bad register accesses
 * Add assertion about FSC format for syndrome registers
 * Move excnames[] array into arm_log_exceptions()
 * exynos: minor code cleanups
 * hw/arm/boot: take Linux/arm64 TEXT_OFFSET header field into account
 * Fix APSR writes via M profile MSR

----------------------------------------------------------------
Alistair Francis (5):
      cadence_gem: Read the correct queue descriptor
      cadence_gem: Correct the multi-queue can rx logic
      cadence_gem: Correct the interupt logic
      cadence_gem: Make the revision a property
      xlnx-zynqmp: Set the Cadence GEM revision

Ard Biesheuvel (1):
      hw/arm/boot: take Linux/arm64 TEXT_OFFSET header field into account

Ishani Chugh (1):
      arm/kvm: Remove trailing newlines from error_report()

Krzysztof Kozlowski (3):
      hw/arm/exynos: Convert fprintf to qemu_log_mask/error_report
      hw/char/exynos4210_uart: Constify static array and few arguments
      hw/misc/exynos4210_pmu: Reorder local variables for readability

Peter Maydell (13):
      target/arm: Add missing entries to excnames[] for log strings
      arm: Move excnames[] array into arm_log_exceptions()
      target/arm: Add assertion about FSC format for syndrome registers
      stellaris: Don't hw_error() on bad register accesses
      arm: Don't implement BXJ on M-profile CPUs
      arm: Thumb shift operations should not permit interworking branches
      arm: Factor out "generate right kind of step exception"
      arm: Move gen_set_condexec() and gen_set_pc_im() up in the file
      arm: Move condition-failed codepath generation out of if()
      arm: Abstract out "are we singlestepping" test to utility function
      arm: Track M profile handler mode state in TB flags
      arm: Implement M profile exception return properly
      arm: Remove workarounds for old M-profile exception return implementation

Suramya Shah (1):
      hw/arm: Qomify pxa2xx.c

 include/hw/net/cadence_gem.h |   1 +
 target/arm/cpu.h             |  10 +++
 target/arm/internals.h       |  21 -----
 target/arm/translate.h       |   5 ++
 hw/arm/boot.c                |  64 ++++++++++++---
 hw/arm/exynos4_boards.c      |   7 +-
 hw/arm/pxa2xx.c              |  14 ++--
 hw/arm/stellaris.c           |  60 ++++++++------
 hw/arm/xlnx-zynqmp.c         |   6 +-
 hw/char/exynos4210_uart.c    |   8 +-
 hw/misc/exynos4210_pmu.c     |   4 +-
 hw/net/cadence_gem.c         |  45 +++++++----
 hw/timer/exynos4210_mct.c    |   6 +-
 hw/timer/exynos4210_pwm.c    |  13 ++--
 hw/timer/exynos4210_rtc.c    |  19 ++---
 target/arm/cpu.c             |  43 +---------
 target/arm/helper.c          |  19 +++++
 target/arm/kvm64.c           |   4 +-
 target/arm/op_helper.c       |  23 ++++--
 target/arm/translate.c       | 181 +++++++++++++++++++++++++++++--------------
 20 files changed, 341 insertions(+), 212 deletions(-)

[Qemu-devel] [PULL 01/24] hw/arm/boot: take Linux/arm64 TEXT_OFFSET header field into account

[Peter Maydell]

From: Ard Biesheuvel <ard.biesheuvel@linaro.org>

The arm64 boot protocol stipulates that the kernel must be loaded
TEXT_OFFSET bytes beyond a 2 MB aligned base address, where TEXT_OFFSET
could be any 4 KB multiple between 0 and 2 MB, and whose value can be
found in the header of the Image file.

So after attempts to load the arm64 kernel image as an ELF file or as a
U-Boot image have failed (both of which have their own way of specifying
the load offset), try to determine the TEXT_OFFSET from the image after
loading it but before mapping it as a ROM mapping into the guest address
space.

Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1489414630-21609-1-git-send-email-ard.biesheuvel@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 hw/arm/boot.c | 64 +++++++++++++++++++++++++++++++++++++++++++++++++----------
 1 file changed, 53 insertions(+), 11 deletions(-)

diff --git a/hw/arm/boot.c b/hw/arm/boot.c
index ff621e4..c2720c8 100644
--- a/hw/arm/boot.c
+++ b/hw/arm/boot.c
@@ -31,6 +31,9 @@
 #define KERNEL_LOAD_ADDR 0x00010000
 #define KERNEL64_LOAD_ADDR 0x00080000
 
+#define ARM64_TEXT_OFFSET_OFFSET    8
+#define ARM64_MAGIC_OFFSET          56
+
 typedef enum {
     FIXUP_NONE = 0,     /* do nothing */
     FIXUP_TERMINATOR,   /* end of insns */
@@ -768,6 +771,49 @@ static uint64_t arm_load_elf(struct arm_boot_info *info, uint64_t *pentry,
     return ret;
 }
 
+static uint64_t load_aarch64_image(const char *filename, hwaddr mem_base,
+                                   hwaddr *entry)
+{
+    hwaddr kernel_load_offset = KERNEL64_LOAD_ADDR;
+    uint8_t *buffer;
+    int size;
+
+    /* On aarch64, it's the bootloader's job to uncompress the kernel. */
+    size = load_image_gzipped_buffer(filename, LOAD_IMAGE_MAX_GUNZIP_BYTES,
+                                     &buffer);
+
+    if (size < 0) {
+        gsize len;
+
+        /* Load as raw file otherwise */
+        if (!g_file_get_contents(filename, (char **)&buffer, &len, NULL)) {
+            return -1;
+        }
+        size = len;
+    }
+
+    /* check the arm64 magic header value -- very old kernels may not have it */
+    if (memcmp(buffer + ARM64_MAGIC_OFFSET, "ARM\x64", 4) == 0) {
+        uint64_t hdrvals[2];
+
+        /* The arm64 Image header has text_offset and image_size fields at 8 and
+         * 16 bytes into the Image header, respectively. The text_offset field
+         * is only valid if the image_size is non-zero.
+         */
+        memcpy(&hdrvals, buffer + ARM64_TEXT_OFFSET_OFFSET, sizeof(hdrvals));
+        if (hdrvals[1] != 0) {
+            kernel_load_offset = le64_to_cpu(hdrvals[0]);
+        }
+    }
+
+    *entry = mem_base + kernel_load_offset;
+    rom_add_blob_fixed(filename, buffer, size, *entry);
+
+    g_free(buffer);
+
+    return size;
+}
+
 static void arm_load_kernel_notify(Notifier *notifier, void *data)
 {
     CPUState *cs;
@@ -776,7 +822,7 @@ static void arm_load_kernel_notify(Notifier *notifier, void *data)
     int is_linux = 0;
     uint64_t elf_entry, elf_low_addr, elf_high_addr;
     int elf_machine;
-    hwaddr entry, kernel_load_offset;
+    hwaddr entry;
     static const ARMInsnFixup *primary_loader;
     ArmLoadKernelNotifier *n = DO_UPCAST(ArmLoadKernelNotifier,
                                          notifier, notifier);
@@ -841,14 +887,12 @@ static void arm_load_kernel_notify(Notifier *notifier, void *data)
 
     if (arm_feature(&cpu->env, ARM_FEATURE_AARCH64)) {
         primary_loader = bootloader_aarch64;
-        kernel_load_offset = KERNEL64_LOAD_ADDR;
         elf_machine = EM_AARCH64;
     } else {
         primary_loader = bootloader;
         if (!info->write_board_setup) {
             primary_loader += BOOTLOADER_NO_BOARD_SETUP_OFFSET;
         }
-        kernel_load_offset = KERNEL_LOAD_ADDR;
         elf_machine = EM_ARM;
     }
 
@@ -900,17 +944,15 @@ static void arm_load_kernel_notify(Notifier *notifier, void *data)
         kernel_size = load_uimage(info->kernel_filename, &entry, NULL,
                                   &is_linux, NULL, NULL);
     }
-    /* On aarch64, it's the bootloader's job to uncompress the kernel. */
     if (arm_feature(&cpu->env, ARM_FEATURE_AARCH64) && kernel_size < 0) {
-        entry = info->loader_start + kernel_load_offset;
-        kernel_size = load_image_gzipped(info->kernel_filename, entry,
-                                         info->ram_size - kernel_load_offset);
+        kernel_size = load_aarch64_image(info->kernel_filename,
+                                         info->loader_start, &entry);
         is_linux = 1;
-    }
-    if (kernel_size < 0) {
-        entry = info->loader_start + kernel_load_offset;
+    } else if (kernel_size < 0) {
+        /* 32-bit ARM */
+        entry = info->loader_start + KERNEL_LOAD_ADDR;
         kernel_size = load_image_targphys(info->kernel_filename, entry,
-                                          info->ram_size - kernel_load_offset);
+                                          info->ram_size - KERNEL_LOAD_ADDR);
         is_linux = 1;
     }
     if (kernel_size < 0) {
-- 
2.7.4

[Qemu-devel] [PULL 02/24] hw/arm/exynos: Convert fprintf to qemu_log_mask/error_report

[Peter Maydell]

From: Krzysztof Kozlowski <krzk@kernel.org>

qemu_log_mask() and error_report() are preferred over fprintf() for
logging errors.  Also remove square brackets [] and additional new line
characters in printed messages.

Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20170313184750.429-2-krzk@kernel.org
[PMM: wrapped long line]
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 hw/arm/exynos4_boards.c   |  7 ++++---
 hw/timer/exynos4210_mct.c |  6 ++++--
 hw/timer/exynos4210_pwm.c | 13 +++++++------
 hw/timer/exynos4210_rtc.c | 19 ++++++++++---------
 4 files changed, 25 insertions(+), 20 deletions(-)

diff --git a/hw/arm/exynos4_boards.c b/hw/arm/exynos4_boards.c
index 0efa194..4853c31 100644
--- a/hw/arm/exynos4_boards.c
+++ b/hw/arm/exynos4_boards.c
@@ -22,6 +22,7 @@
  */
 
 #include "qemu/osdep.h"
+#include "qemu/error-report.h"
 #include "qemu-common.h"
 #include "cpu.h"
 #include "sysemu/sysemu.h"
@@ -101,9 +102,9 @@ static Exynos4210State *exynos4_boards_init_common(MachineState *machine,
     MachineClass *mc = MACHINE_GET_CLASS(machine);
 
     if (smp_cpus != EXYNOS4210_NCPUS && !qtest_enabled()) {
-        fprintf(stderr, "%s board supports only %d CPU cores. Ignoring smp_cpus"
-                " value.\n",
-                mc->name, EXYNOS4210_NCPUS);
+        error_report("%s board supports only %d CPU cores, ignoring smp_cpus"
+                     " value",
+                     mc->name, EXYNOS4210_NCPUS);
     }
 
     exynos4_board_binfo.ram_size = exynos4_board_ram_size[board_type];
diff --git a/hw/timer/exynos4210_mct.c b/hw/timer/exynos4210_mct.c
index 0c18934..a2ec392 100644
--- a/hw/timer/exynos4210_mct.c
+++ b/hw/timer/exynos4210_mct.c
@@ -53,6 +53,7 @@
  */
 
 #include "qemu/osdep.h"
+#include "qemu/log.h"
 #include "hw/sysbus.h"
 #include "qemu/timer.h"
 #include "qemu/main-loop.h"
@@ -1372,8 +1373,9 @@ break;
     case L0_TCNTO: case L1_TCNTO:
     case L0_ICNTO: case L1_ICNTO:
     case L0_FRCNTO: case L1_FRCNTO:
-        fprintf(stderr, "\n[exynos4210.mct: write to RO register "
-                TARGET_FMT_plx "]\n\n", offset);
+        qemu_log_mask(LOG_GUEST_ERROR,
+                      "exynos4210.mct: write to RO register " TARGET_FMT_plx,
+                      offset);
         break;
 
     case L0_INT_CSTAT: case L1_INT_CSTAT:
diff --git a/hw/timer/exynos4210_pwm.c b/hw/timer/exynos4210_pwm.c
index f576507..87f63f0 100644
--- a/hw/timer/exynos4210_pwm.c
+++ b/hw/timer/exynos4210_pwm.c
@@ -21,6 +21,7 @@
  */
 
 #include "qemu/osdep.h"
+#include "qemu/log.h"
 #include "hw/sysbus.h"
 #include "qemu/timer.h"
 #include "qemu-common.h"
@@ -252,9 +253,9 @@ static uint64_t exynos4210_pwm_read(void *opaque, hwaddr offset,
         break;
 
     default:
-        fprintf(stderr,
-                "[exynos4210.pwm: bad read offset " TARGET_FMT_plx "]\n",
-                offset);
+        qemu_log_mask(LOG_GUEST_ERROR,
+                      "exynos4210.pwm: bad read offset " TARGET_FMT_plx,
+                      offset);
         break;
     }
     return value;
@@ -343,9 +344,9 @@ static void exynos4210_pwm_write(void *opaque, hwaddr offset,
         break;
 
     default:
-        fprintf(stderr,
-                "[exynos4210.pwm: bad write offset " TARGET_FMT_plx "]\n",
-                offset);
+        qemu_log_mask(LOG_GUEST_ERROR,
+                      "exynos4210.pwm: bad write offset " TARGET_FMT_plx,
+                      offset);
         break;
 
     }
diff --git a/hw/timer/exynos4210_rtc.c b/hw/timer/exynos4210_rtc.c
index 1a648c5..4607833 100644
--- a/hw/timer/exynos4210_rtc.c
+++ b/hw/timer/exynos4210_rtc.c
@@ -26,6 +26,7 @@
  */
 
 #include "qemu/osdep.h"
+#include "qemu/log.h"
 #include "hw/sysbus.h"
 #include "qemu/timer.h"
 #include "qemu-common.h"
@@ -370,9 +371,9 @@ static uint64_t exynos4210_rtc_read(void *opaque, hwaddr offset,
         break;
 
     default:
-        fprintf(stderr,
-                "[exynos4210.rtc: bad read offset " TARGET_FMT_plx "]\n",
-                offset);
+        qemu_log_mask(LOG_GUEST_ERROR,
+                      "exynos4210.rtc: bad read offset " TARGET_FMT_plx,
+                      offset);
         break;
     }
     return value;
@@ -433,9 +434,9 @@ static void exynos4210_rtc_write(void *opaque, hwaddr offset,
         if (value > TICNT_THRESHOLD) {
             s->reg_ticcnt = value;
         } else {
-            fprintf(stderr,
-                    "[exynos4210.rtc: bad TICNT value %u ]\n",
-                    (uint32_t)value);
+            qemu_log_mask(LOG_GUEST_ERROR,
+                          "exynos4210.rtc: bad TICNT value %u",
+                          (uint32_t)value);
         }
         break;
 
@@ -500,9 +501,9 @@ static void exynos4210_rtc_write(void *opaque, hwaddr offset,
         break;
 
     default:
-        fprintf(stderr,
-                "[exynos4210.rtc: bad write offset " TARGET_FMT_plx "]\n",
-                offset);
+        qemu_log_mask(LOG_GUEST_ERROR,
+                      "exynos4210.rtc: bad write offset " TARGET_FMT_plx,
+                      offset);
         break;
 
     }
-- 
2.7.4

[Qemu-devel] [PULL 03/24] hw/char/exynos4210_uart: Constify static array and few arguments

[Peter Maydell]

From: Krzysztof Kozlowski <krzk@kernel.org>

The static array exynos4210_uart_regs with register values is not
modified so it can be made const.

Few other functions accept driver or uart state as an argument but they
do not change it and do not cast it so this can be made const for code
safeness.

Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Message-id: 20170313184750.429-3-krzk@kernel.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 hw/char/exynos4210_uart.c | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/hw/char/exynos4210_uart.c b/hw/char/exynos4210_uart.c
index b75f28d..bff706a 100644
--- a/hw/char/exynos4210_uart.c
+++ b/hw/char/exynos4210_uart.c
@@ -102,7 +102,7 @@ typedef struct Exynos4210UartReg {
     uint32_t            reset_value;
 } Exynos4210UartReg;
 
-static Exynos4210UartReg exynos4210_uart_regs[] = {
+static const Exynos4210UartReg exynos4210_uart_regs[] = {
     {"ULCON",    ULCON,    0x00000000},
     {"UCON",     UCON,     0x00003000},
     {"UFCON",    UFCON,    0x00000000},
@@ -220,7 +220,7 @@ static uint8_t fifo_retrieve(Exynos4210UartFIFO *q)
     return  ret;
 }
 
-static int fifo_elements_number(Exynos4210UartFIFO *q)
+static int fifo_elements_number(const Exynos4210UartFIFO *q)
 {
     if (q->sp < q->rp) {
         return q->size - q->rp + q->sp;
@@ -229,7 +229,7 @@ static int fifo_elements_number(Exynos4210UartFIFO *q)
     return q->sp - q->rp;
 }
 
-static int fifo_empty_elements_number(Exynos4210UartFIFO *q)
+static int fifo_empty_elements_number(const Exynos4210UartFIFO *q)
 {
     return q->size - fifo_elements_number(q);
 }
@@ -245,7 +245,7 @@ static void fifo_reset(Exynos4210UartFIFO *q)
     q->rp = 0;
 }
 
-static uint32_t exynos4210_uart_Tx_FIFO_trigger_level(Exynos4210UartState *s)
+static uint32_t exynos4210_uart_Tx_FIFO_trigger_level(const Exynos4210UartState *s)
 {
     uint32_t level = 0;
     uint32_t reg;
-- 
2.7.4

[Qemu-devel] [PULL 04/24] hw/misc/exynos4210_pmu: Reorder local variables for readability

[Peter Maydell]

From: Krzysztof Kozlowski <krzk@kernel.org>

Short declaration of 'i' was in the middle of declarations with
assignments.  Make it a little bit more readable.  Additionally switch
from "unsigned" to "unsigned int" as this pattern is more widely used.
No functional change.

Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20170313184750.429-4-krzk@kernel.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 hw/misc/exynos4210_pmu.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/hw/misc/exynos4210_pmu.c b/hw/misc/exynos4210_pmu.c
index e30dbc7..63a8ccd 100644
--- a/hw/misc/exynos4210_pmu.c
+++ b/hw/misc/exynos4210_pmu.c
@@ -401,8 +401,8 @@ static uint64_t exynos4210_pmu_read(void *opaque, hwaddr offset,
                                     unsigned size)
 {
     Exynos4210PmuState *s = (Exynos4210PmuState *)opaque;
-    unsigned i;
     const Exynos4210PmuReg *reg_p = exynos4210_pmu_regs;
+    unsigned int i;
 
     for (i = 0; i < PMU_NUM_OF_REGISTERS; i++) {
         if (reg_p->offset == offset) {
@@ -420,8 +420,8 @@ static void exynos4210_pmu_write(void *opaque, hwaddr offset,
                                  uint64_t val, unsigned size)
 {
     Exynos4210PmuState *s = (Exynos4210PmuState *)opaque;
-    unsigned i;
     const Exynos4210PmuReg *reg_p = exynos4210_pmu_regs;
+    unsigned int i;
 
     for (i = 0; i < PMU_NUM_OF_REGISTERS; i++) {
         if (reg_p->offset == offset) {
-- 
2.7.4

[Qemu-devel] [PULL 05/24] target/arm: Add missing entries to excnames[] for log strings

[Peter Maydell]

Recent changes have added new EXCP_ values to ARM but forgot
to update the excnames[] array which is used to provide
human-readable strings when printing information about the
exception for debug logging. Add the missing entries, and
add a comment to the list of #defines to help avoid the mistake
being repeated in future.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Message-id: 1491486340-25988-1-git-send-email-peter.maydell@linaro.org
---
 target/arm/cpu.h       | 1 +
 target/arm/internals.h | 2 ++
 2 files changed, 3 insertions(+)

diff --git a/target/arm/cpu.h b/target/arm/cpu.h
index a8aabce..e6f05e2 100644
--- a/target/arm/cpu.h
+++ b/target/arm/cpu.h
@@ -58,6 +58,7 @@
 #define EXCP_SEMIHOST       16   /* semihosting call */
 #define EXCP_NOCP           17   /* v7M NOCP UsageFault */
 #define EXCP_INVSTATE       18   /* v7M INVSTATE UsageFault */
+/* NB: new EXCP_ defines should be added to the excnames[] array too */
 
 #define ARMV7M_EXCP_RESET   1
 #define ARMV7M_EXCP_NMI     2
diff --git a/target/arm/internals.h b/target/arm/internals.h
index f742a41..97ca034 100644
--- a/target/arm/internals.h
+++ b/target/arm/internals.h
@@ -70,6 +70,8 @@ static const char * const excnames[] = {
     [EXCP_VIRQ] = "Virtual IRQ",
     [EXCP_VFIQ] = "Virtual FIQ",
     [EXCP_SEMIHOST] = "Semihosting call",
+    [EXCP_NOCP] = "v7M NOCP UsageFault",
+    [EXCP_INVSTATE] = "v7M INVSTATE UsageFault",
 };
 
 /* Scale factor for generic timers, ie number of ns per tick.
-- 
2.7.4

[Qemu-devel] [PULL 06/24] arm: Move excnames[] array into arm_log_exceptions()

[Peter Maydell]

The excnames[] array is defined in internals.h because we used
to use it from two different source files for handling logging
of AArch32 and AArch64 exception entry. Refactoring means that
it's now used only in arm_log_exception() in helper.c, so move
the array into that function.

Suggested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 1491821097-5647-1-git-send-email-peter.maydell@linaro.org
---
 target/arm/cpu.h       |  2 +-
 target/arm/internals.h | 23 -----------------------
 target/arm/helper.c    | 19 +++++++++++++++++++
 3 files changed, 20 insertions(+), 24 deletions(-)

diff --git a/target/arm/cpu.h b/target/arm/cpu.h
index e6f05e2..ab86943 100644
--- a/target/arm/cpu.h
+++ b/target/arm/cpu.h
@@ -58,7 +58,7 @@
 #define EXCP_SEMIHOST       16   /* semihosting call */
 #define EXCP_NOCP           17   /* v7M NOCP UsageFault */
 #define EXCP_INVSTATE       18   /* v7M INVSTATE UsageFault */
-/* NB: new EXCP_ defines should be added to the excnames[] array too */
+/* NB: add new EXCP_ defines to the array in arm_log_exception() too */
 
 #define ARMV7M_EXCP_RESET   1
 #define ARMV7M_EXCP_NMI     2
diff --git a/target/arm/internals.h b/target/arm/internals.h
index 97ca034..1f6efef 100644
--- a/target/arm/internals.h
+++ b/target/arm/internals.h
@@ -51,29 +51,6 @@ static inline bool excp_is_internal(int excp)
         || excp == EXCP_SEMIHOST;
 }
 
-/* Exception names for debug logging; note that not all of these
- * precisely correspond to architectural exceptions.
- */
-static const char * const excnames[] = {
-    [EXCP_UDEF] = "Undefined Instruction",
-    [EXCP_SWI] = "SVC",
-    [EXCP_PREFETCH_ABORT] = "Prefetch Abort",
-    [EXCP_DATA_ABORT] = "Data Abort",
-    [EXCP_IRQ] = "IRQ",
-    [EXCP_FIQ] = "FIQ",
-    [EXCP_BKPT] = "Breakpoint",
-    [EXCP_EXCEPTION_EXIT] = "QEMU v7M exception exit",
-    [EXCP_KERNEL_TRAP] = "QEMU intercept of kernel commpage",
-    [EXCP_HVC] = "Hypervisor Call",
-    [EXCP_HYP_TRAP] = "Hypervisor Trap",
-    [EXCP_SMC] = "Secure Monitor Call",
-    [EXCP_VIRQ] = "Virtual IRQ",
-    [EXCP_VFIQ] = "Virtual FIQ",
-    [EXCP_SEMIHOST] = "Semihosting call",
-    [EXCP_NOCP] = "v7M NOCP UsageFault",
-    [EXCP_INVSTATE] = "v7M INVSTATE UsageFault",
-};
-
 /* Scale factor for generic timers, ie number of ns per tick.
  * This gives a 62.5MHz timer.
  */
diff --git a/target/arm/helper.c b/target/arm/helper.c
index 8cb7a94..8a3e448 100644
--- a/target/arm/helper.c
+++ b/target/arm/helper.c
@@ -6271,6 +6271,25 @@ static void arm_log_exception(int idx)
 {
     if (qemu_loglevel_mask(CPU_LOG_INT)) {
         const char *exc = NULL;
+        static const char * const excnames[] = {
+            [EXCP_UDEF] = "Undefined Instruction",
+            [EXCP_SWI] = "SVC",
+            [EXCP_PREFETCH_ABORT] = "Prefetch Abort",
+            [EXCP_DATA_ABORT] = "Data Abort",
+            [EXCP_IRQ] = "IRQ",
+            [EXCP_FIQ] = "FIQ",
+            [EXCP_BKPT] = "Breakpoint",
+            [EXCP_EXCEPTION_EXIT] = "QEMU v7M exception exit",
+            [EXCP_KERNEL_TRAP] = "QEMU intercept of kernel commpage",
+            [EXCP_HVC] = "Hypervisor Call",
+            [EXCP_HYP_TRAP] = "Hypervisor Trap",
+            [EXCP_SMC] = "Secure Monitor Call",
+            [EXCP_VIRQ] = "Virtual IRQ",
+            [EXCP_VFIQ] = "Virtual FIQ",
+            [EXCP_SEMIHOST] = "Semihosting call",
+            [EXCP_NOCP] = "v7M NOCP UsageFault",
+            [EXCP_INVSTATE] = "v7M INVSTATE UsageFault",
+        };
 
         if (idx >= 0 && idx < ARRAY_SIZE(excnames)) {
             exc = excnames[idx];
-- 
2.7.4

[Qemu-devel] [PULL 07/24] target/arm: Add assertion about FSC format for syndrome registers

[Peter Maydell]

In tlb_fill() we construct a syndrome register value from a
fault status register value which is filled in by arm_tlb_fill().
arm_tlb_fill() returns FSR values which might be in the format
used with short-format page descriptors, or the format used
with long-format (LPAE) descriptors. The syndrome register
always uses LPAE-format FSR status codes.

It isn't actually possible to end up delivering a syndrome
register value to the guest for a fault which is reported
with a short-format FSR (that kind of stage 1 fault will only
happen for an AArch32 translation regime which doesn't have
a syndrome register, and can never be redirected to an AArch64
or Hyp exception level). Add an assertion which checks this,
and adjust the code so that we construct a syndrome with
an invalid status code, rather than allowing set bits in
the FSR input to randomly corrupt other fields in the syndrome.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Message-id: 1491486152-24304-1-git-send-email-peter.maydell@linaro.org
---
 target/arm/op_helper.c | 23 ++++++++++++++++++-----
 1 file changed, 18 insertions(+), 5 deletions(-)

diff --git a/target/arm/op_helper.c b/target/arm/op_helper.c
index d64c867..156b825 100644
--- a/target/arm/op_helper.c
+++ b/target/arm/op_helper.c
@@ -130,7 +130,7 @@ void tlb_fill(CPUState *cs, target_ulong addr, MMUAccessType access_type,
     if (unlikely(ret)) {
         ARMCPU *cpu = ARM_CPU(cs);
         CPUARMState *env = &cpu->env;
-        uint32_t syn, exc;
+        uint32_t syn, exc, fsc;
         unsigned int target_el;
         bool same_el;
 
@@ -145,19 +145,32 @@ void tlb_fill(CPUState *cs, target_ulong addr, MMUAccessType access_type,
             env->cp15.hpfar_el2 = extract64(fi.s2addr, 12, 47) << 4;
         }
         same_el = arm_current_el(env) == target_el;
-        /* AArch64 syndrome does not have an LPAE bit */
-        syn = fsr & ~(1 << 9);
+
+        if (fsr & (1 << 9)) {
+            /* LPAE format fault status register : bottom 6 bits are
+             * status code in the same form as needed for syndrome
+             */
+            fsc = extract32(fsr, 0, 6);
+        } else {
+            /* Short format FSR : this fault will never actually be reported
+             * to an EL that uses a syndrome register. Check that here,
+             * and use a (currently) reserved FSR code in case the constructed
+             * syndrome does leak into the guest somehow.
+             */
+            assert(target_el != 2 && !arm_el_is_aa64(env, target_el));
+            fsc = 0x3f;
+        }
 
         /* For insn and data aborts we assume there is no instruction syndrome
          * information; this is always true for exceptions reported to EL1.
          */
         if (access_type == MMU_INST_FETCH) {
-            syn = syn_insn_abort(same_el, 0, fi.s1ptw, syn);
+            syn = syn_insn_abort(same_el, 0, fi.s1ptw, fsc);
             exc = EXCP_PREFETCH_ABORT;
         } else {
             syn = merge_syn_data_abort(env->exception.syndrome, target_el,
                                        same_el, fi.s1ptw,
-                                       access_type == MMU_DATA_STORE, syn);
+                                       access_type == MMU_DATA_STORE, fsc);
             if (access_type == MMU_DATA_STORE
                 && arm_feature(env, ARM_FEATURE_V6)) {
                 fsr |= (1 << 11);
-- 
2.7.4

[Qemu-devel] [PULL 08/24] stellaris: Don't hw_error() on bad register accesses

[Peter Maydell]

Current recommended style is to log a guest error on bad register
accesses, not kill the whole system with hw_error().  Change the
hw_error() calls to log as LOG_GUEST_ERROR or LOG_UNIMP or use
g_assert_not_reached() as appropriate.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 1491486314-25823-1-git-send-email-peter.maydell@linaro.org
---
 hw/arm/stellaris.c | 60 +++++++++++++++++++++++++++++++++---------------------
 1 file changed, 37 insertions(+), 23 deletions(-)

diff --git a/hw/arm/stellaris.c b/hw/arm/stellaris.c
index 9edcd49..ea7a809 100644
--- a/hw/arm/stellaris.c
+++ b/hw/arm/stellaris.c
@@ -108,7 +108,10 @@ static void gptm_reload(gptm_state *s, int n, int reset)
     } else if (s->mode[n] == 0xa) {
         /* PWM mode.  Not implemented.  */
     } else {
-        hw_error("TODO: 16-bit timer mode 0x%x\n", s->mode[n]);
+        qemu_log_mask(LOG_UNIMP,
+                      "GPTM: 16-bit timer mode unimplemented: 0x%x\n",
+                      s->mode[n]);
+        return;
     }
     s->tick[n] = tick;
     timer_mod(s->timer[n], tick);
@@ -149,7 +152,9 @@ static void gptm_tick(void *opaque)
     } else if (s->mode[n] == 0xa) {
         /* PWM mode.  Not implemented.  */
     } else {
-        hw_error("TODO: 16-bit timer mode 0x%x\n", s->mode[n]);
+        qemu_log_mask(LOG_UNIMP,
+                      "GPTM: 16-bit timer mode unimplemented: 0x%x\n",
+                      s->mode[n]);
     }
     gptm_update_irq(s);
 }
@@ -286,7 +291,8 @@ static void gptm_write(void *opaque, hwaddr offset,
         s->match_prescale[0] = value;
         break;
     default:
-        hw_error("gptm_write: Bad offset 0x%x\n", (int)offset);
+        qemu_log_mask(LOG_GUEST_ERROR,
+                      "GPTM: read at bad offset 0x%x\n", (int)offset);
     }
     gptm_update_irq(s);
 }
@@ -425,7 +431,10 @@ static int ssys_board_class(const ssys_state *s)
         }
         /* for unknown classes, fall through */
     default:
-        hw_error("ssys_board_class: Unknown class 0x%08x\n", did0);
+        /* This can only happen if the hardwired constant did0 value
+         * in this board's stellaris_board_info struct is wrong.
+         */
+        g_assert_not_reached();
     }
 }
 
@@ -479,8 +488,7 @@ static uint64_t ssys_read(void *opaque, hwaddr offset,
             case DID0_CLASS_SANDSTORM:
                 return pllcfg_sandstorm[xtal];
             default:
-                hw_error("ssys_read: Unhandled class for PLLCFG read.\n");
-                return 0;
+                g_assert_not_reached();
             }
         }
     case 0x070: /* RCC2 */
@@ -512,7 +520,8 @@ static uint64_t ssys_read(void *opaque, hwaddr offset,
     case 0x1e4: /* USER1 */
         return s->user1;
     default:
-        hw_error("ssys_read: Bad offset 0x%x\n", (int)offset);
+        qemu_log_mask(LOG_GUEST_ERROR,
+                      "SSYS: read at bad offset 0x%x\n", (int)offset);
         return 0;
     }
 }
@@ -614,7 +623,8 @@ static void ssys_write(void *opaque, hwaddr offset,
         s->ldoarst = value;
         break;
     default:
-        hw_error("ssys_write: Bad offset 0x%x\n", (int)offset);
+        qemu_log_mask(LOG_GUEST_ERROR,
+                      "SSYS: write at bad offset 0x%x\n", (int)offset);
     }
     ssys_update(s);
 }
@@ -748,7 +758,8 @@ static uint64_t stellaris_i2c_read(void *opaque, hwaddr offset,
     case 0x20: /* MCR */
         return s->mcr;
     default:
-        hw_error("strllaris_i2c_read: Bad offset 0x%x\n", (int)offset);
+        qemu_log_mask(LOG_GUEST_ERROR,
+                      "stellaris_i2c: read at bad offset 0x%x\n", (int)offset);
         return 0;
     }
 }
@@ -823,17 +834,18 @@ static void stellaris_i2c_write(void *opaque, hwaddr offset,
         s->mris &= ~value;
         break;
     case 0x20: /* MCR */
-        if (value & 1)
-            hw_error(
-                      "stellaris_i2c_write: Loopback not implemented\n");
-        if (value & 0x20)
-            hw_error(
-                      "stellaris_i2c_write: Slave mode not implemented\n");
+        if (value & 1) {
+            qemu_log_mask(LOG_UNIMP, "stellaris_i2c: Loopback not implemented");
+        }
+        if (value & 0x20) {
+            qemu_log_mask(LOG_UNIMP,
+                          "stellaris_i2c: Slave mode not implemented");
+        }
         s->mcr = value & 0x31;
         break;
     default:
-        hw_error("stellaris_i2c_write: Bad offset 0x%x\n",
-                  (int)offset);
+        qemu_log_mask(LOG_GUEST_ERROR,
+                      "stellaris_i2c: write at bad offset 0x%x\n", (int)offset);
     }
     stellaris_i2c_update(s);
 }
@@ -1057,8 +1069,8 @@ static uint64_t stellaris_adc_read(void *opaque, hwaddr offset,
     case 0x30: /* SAC */
         return s->sac;
     default:
-        hw_error("strllaris_adc_read: Bad offset 0x%x\n",
-                  (int)offset);
+        qemu_log_mask(LOG_GUEST_ERROR,
+                      "stellaris_adc: read at bad offset 0x%x\n", (int)offset);
         return 0;
     }
 }
@@ -1078,8 +1090,9 @@ static void stellaris_adc_write(void *opaque, hwaddr offset,
             return;
         case 0x04: /* SSCTL */
             if (value != 6) {
-                hw_error("ADC: Unimplemented sequence %" PRIx64 "\n",
-                          value);
+                qemu_log_mask(LOG_UNIMP,
+                              "ADC: Unimplemented sequence %" PRIx64 "\n",
+                              value);
             }
             s->ssctl[n] = value;
             return;
@@ -1110,13 +1123,14 @@ static void stellaris_adc_write(void *opaque, hwaddr offset,
         s->sspri = value;
         break;
     case 0x28: /* PSSI */
-        hw_error("Not implemented:  ADC sample initiate\n");
+        qemu_log_mask(LOG_UNIMP, "ADC: sample initiate unimplemented");
         break;
     case 0x30: /* SAC */
         s->sac = value;
         break;
     default:
-        hw_error("stellaris_adc_write: Bad offset 0x%x\n", (int)offset);
+        qemu_log_mask(LOG_GUEST_ERROR,
+                      "stellaris_adc: write at bad offset 0x%x\n", (int)offset);
     }
     stellaris_adc_update(s);
 }
-- 
2.7.4

[Qemu-devel] [PULL 09/24] arm/kvm: Remove trailing newlines from error_report()

[Peter Maydell]

From: Ishani Chugh <chugh.ishani@research.iiit.ac.in>

Signed-off-by: Ishani Chugh <chugh.ishani@research.iiit.ac.in>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 1491629987-6826-1-git-send-email-chugh.ishani@research.iiit.ac.in
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 target/arm/kvm64.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/target/arm/kvm64.c b/target/arm/kvm64.c
index 6111109..a16abc8 100644
--- a/target/arm/kvm64.c
+++ b/target/arm/kvm64.c
@@ -940,7 +940,7 @@ bool kvm_arm_handle_debug(CPUState *cs, struct kvm_debug_exit_arch *debug_exit)
              * single step at this point so something has gone wrong.
              */
             error_report("%s: guest single-step while debugging unsupported"
-                         " (%"PRIx64", %"PRIx32")\n",
+                         " (%"PRIx64", %"PRIx32")",
                          __func__, env->pc, debug_exit->hsr);
             return false;
         }
@@ -965,7 +965,7 @@ bool kvm_arm_handle_debug(CPUState *cs, struct kvm_debug_exit_arch *debug_exit)
         break;
     }
     default:
-        error_report("%s: unhandled debug exit (%"PRIx32", %"PRIx64")\n",
+        error_report("%s: unhandled debug exit (%"PRIx32", %"PRIx64")",
                      __func__, debug_exit->hsr, env->pc);
     }
 
-- 
2.7.4

[Qemu-devel] [PULL 10/24] hw/arm: Qomify pxa2xx.c

[Peter Maydell]

From: Suramya Shah <shah.suramya@gmail.com>

Signed-off-by: Suramya Shah <shah.suramya@gmail.com>
Message-id: 20170415180316.2694-1-shah.suramya@gmail.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 hw/arm/pxa2xx.c | 14 ++++++--------
 1 file changed, 6 insertions(+), 8 deletions(-)

diff --git a/hw/arm/pxa2xx.c b/hw/arm/pxa2xx.c
index cfee392..eea551d 100644
--- a/hw/arm/pxa2xx.c
+++ b/hw/arm/pxa2xx.c
@@ -755,19 +755,18 @@ static void pxa2xx_ssp_reset(DeviceState *d)
     s->rx_start = s->rx_level = 0;
 }
 
-static int pxa2xx_ssp_init(SysBusDevice *sbd)
+static void pxa2xx_ssp_init(Object *obj)
 {
-    DeviceState *dev = DEVICE(sbd);
-    PXA2xxSSPState *s = PXA2XX_SSP(dev);
-
+    DeviceState *dev = DEVICE(obj);
+    PXA2xxSSPState *s = PXA2XX_SSP(obj);
+    SysBusDevice *sbd = SYS_BUS_DEVICE(obj);
     sysbus_init_irq(sbd, &s->irq);
 
-    memory_region_init_io(&s->iomem, OBJECT(s), &pxa2xx_ssp_ops, s,
+    memory_region_init_io(&s->iomem, obj, &pxa2xx_ssp_ops, s,
                           "pxa2xx-ssp", 0x1000);
     sysbus_init_mmio(sbd, &s->iomem);
 
     s->bus = ssi_create_bus(dev, "ssi");
-    return 0;
 }
 
 /* Real-Time Clock */
@@ -2321,10 +2320,8 @@ PXA2xxState *pxa255_init(MemoryRegion *address_space, unsigned int sdram_size)
 
 static void pxa2xx_ssp_class_init(ObjectClass *klass, void *data)
 {
-    SysBusDeviceClass *sdc = SYS_BUS_DEVICE_CLASS(klass);
     DeviceClass *dc = DEVICE_CLASS(klass);
 
-    sdc->init = pxa2xx_ssp_init;
     dc->reset = pxa2xx_ssp_reset;
     dc->vmsd = &vmstate_pxa2xx_ssp;
 }
@@ -2333,6 +2330,7 @@ static const TypeInfo pxa2xx_ssp_info = {
     .name          = TYPE_PXA2XX_SSP,
     .parent        = TYPE_SYS_BUS_DEVICE,
     .instance_size = sizeof(PXA2xxSSPState),
+    .instance_init = pxa2xx_ssp_init,
     .class_init    = pxa2xx_ssp_class_init,
 };
 
-- 
2.7.4

[Qemu-devel] [PULL 11/24] cadence_gem: Read the correct queue descriptor

[Peter Maydell]

From: Alistair Francis <alistair.francis@xilinx.com>

Read the correct descriptor instead of hardcoding the first (q=0).

Signed-off-by: Alistair Francis <alistair.francis@xilinx.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 988b183dcf951856d8b3379f7e911ec95233bbf4.1491947224.git.alistair.francis@xilinx.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 hw/net/cadence_gem.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/hw/net/cadence_gem.c b/hw/net/cadence_gem.c
index d4de8ad..17c229d 100644
--- a/hw/net/cadence_gem.c
+++ b/hw/net/cadence_gem.c
@@ -790,8 +790,8 @@ static void gem_get_rx_desc(CadenceGEMState *s, int q)
 {
     DB_PRINT("read descriptor 0x%x\n", (unsigned)s->rx_desc_addr[q]);
     /* read current descriptor */
-    cpu_physical_memory_read(s->rx_desc_addr[0],
-                             (uint8_t *)s->rx_desc[0], sizeof(s->rx_desc[0]));
+    cpu_physical_memory_read(s->rx_desc_addr[q],
+                             (uint8_t *)s->rx_desc[q], sizeof(s->rx_desc[q]));
 
     /* Descriptor owned by software ? */
     if (rx_desc_get_ownership(s->rx_desc[q]) == 1) {
-- 
2.7.4

[Qemu-devel] [PULL 12/24] cadence_gem: Correct the multi-queue can rx logic

[Peter Maydell]

From: Alistair Francis <alistair.francis@xilinx.com>

Correct the buffer descriptor busy logic to work correctly when using
multiple queues.

Signed-off-by: Alistair Francis <alistair.francis@xilinx.com>
Message-id: 8a7e8059984e27d46a276a66299d035a0afd280f.1491947224.git.alistair.francis@xilinx.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
---
 hw/net/cadence_gem.c | 17 ++++++++++-------
 1 file changed, 10 insertions(+), 7 deletions(-)

diff --git a/hw/net/cadence_gem.c b/hw/net/cadence_gem.c
index 17c229d..a66a9cc 100644
--- a/hw/net/cadence_gem.c
+++ b/hw/net/cadence_gem.c
@@ -481,14 +481,17 @@ static int gem_can_receive(NetClientState *nc)
     }
 
     for (i = 0; i < s->num_priority_queues; i++) {
-        if (rx_desc_get_ownership(s->rx_desc[i]) == 1) {
-            if (s->can_rx_state != 2) {
-                s->can_rx_state = 2;
-                DB_PRINT("can't receive - busy buffer descriptor (q%d) 0x%x\n",
-                         i, s->rx_desc_addr[i]);
-             }
-            return 0;
+        if (rx_desc_get_ownership(s->rx_desc[i]) != 1) {
+            break;
+        }
+    };
+
+    if (i == s->num_priority_queues) {
+        if (s->can_rx_state != 2) {
+            s->can_rx_state = 2;
+            DB_PRINT("can't receive - all the buffer descriptors are busy\n");
         }
+        return 0;
     }
 
     if (s->can_rx_state != 0) {
-- 
2.7.4

[Qemu-devel] [PULL 13/24] cadence_gem: Correct the interupt logic

[Peter Maydell]

From: Alistair Francis <alistair.francis@xilinx.com>

This patch fixes two mistakes in the interrupt logic.

First we only trigger single-queue or multi-queue interrupts if the status
register is set. This logic was already used for non multi-queue interrupts
but it also applies to multi-queue interrupts.

Secondly we need to lower the interrupts if the ISR isn't set. As part
of this we can remove the other interrupt lowering logic and consolidate
it inside gem_update_int_status().

Signed-off-by: Alistair Francis <alistair.francis@xilinx.com>
Message-id: 438bcc014f8f8a2f8f68f322cb6a53f4c04688c2.1491947224.git.alistair.francis@xilinx.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
---
 hw/net/cadence_gem.c | 18 +++++++++++++-----
 1 file changed, 13 insertions(+), 5 deletions(-)

diff --git a/hw/net/cadence_gem.c b/hw/net/cadence_gem.c
index a66a9cc..e1962e1 100644
--- a/hw/net/cadence_gem.c
+++ b/hw/net/cadence_gem.c
@@ -509,7 +509,18 @@ static void gem_update_int_status(CadenceGEMState *s)
 {
     int i;
 
-    if ((s->num_priority_queues == 1) && s->regs[GEM_ISR]) {
+    if (!s->regs[GEM_ISR]) {
+        /* ISR isn't set, clear all the interrupts */
+        for (i = 0; i < s->num_priority_queues; ++i) {
+            qemu_set_irq(s->irq[i], 0);
+        }
+        return;
+    }
+
+    /* If we get here we know s->regs[GEM_ISR] is set, so we don't need to
+     * check it again.
+     */
+    if (s->num_priority_queues == 1) {
         /* No priority queues, just trigger the interrupt */
         DB_PRINT("asserting int.\n");
         qemu_set_irq(s->irq[0], 1);
@@ -1274,7 +1285,6 @@ static uint64_t gem_read(void *opaque, hwaddr offset, unsigned size)
 {
     CadenceGEMState *s;
     uint32_t retval;
-    int i;
     s = (CadenceGEMState *)opaque;
 
     offset >>= 2;
@@ -1285,9 +1295,7 @@ static uint64_t gem_read(void *opaque, hwaddr offset, unsigned size)
     switch (offset) {
     case GEM_ISR:
         DB_PRINT("lowering irqs on ISR read\n");
-        for (i = 0; i < s->num_priority_queues; ++i) {
-            qemu_set_irq(s->irq[i], 0);
-        }
+        /* The interrupts get updated at the end of the function. */
         break;
     case GEM_PHYMNTNC:
         if (retval & GEM_PHYMNTNC_OP_R) {
-- 
2.7.4

[Qemu-devel] [PULL 14/24] cadence_gem: Make the revision a property

[Peter Maydell]

From: Alistair Francis <alistair.francis@xilinx.com>

Expose the Cadence GEM revision as a property.

Signed-off-by: Alistair Francis <alistair.francis@xilinx.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 541324373cf87b50f8be0439a0cb89f5028b016f.1491947224.git.alistair.francis@xilinx.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 include/hw/net/cadence_gem.h | 1 +
 hw/net/cadence_gem.c         | 6 +++++-
 2 files changed, 6 insertions(+), 1 deletion(-)

diff --git a/include/hw/net/cadence_gem.h b/include/hw/net/cadence_gem.h
index c469ffe..35de622 100644
--- a/include/hw/net/cadence_gem.h
+++ b/include/hw/net/cadence_gem.h
@@ -50,6 +50,7 @@ typedef struct CadenceGEMState {
     uint8_t num_priority_queues;
     uint8_t num_type1_screeners;
     uint8_t num_type2_screeners;
+    uint32_t revision;
 
     /* GEM registers backing store */
     uint32_t regs[CADENCE_GEM_MAXREG];
diff --git a/hw/net/cadence_gem.c b/hw/net/cadence_gem.c
index e1962e1..3943187 100644
--- a/hw/net/cadence_gem.c
+++ b/hw/net/cadence_gem.c
@@ -300,6 +300,8 @@
 #define DESC_1_RX_SOF 0x00004000
 #define DESC_1_RX_EOF 0x00008000
 
+#define GEM_MODID_VALUE 0x00020118
+
 static inline unsigned tx_desc_get_buffer(unsigned *desc)
 {
     return desc[0];
@@ -1223,7 +1225,7 @@ static void gem_reset(DeviceState *d)
     s->regs[GEM_TXPAUSE] = 0x0000ffff;
     s->regs[GEM_TXPARTIALSF] = 0x000003ff;
     s->regs[GEM_RXPARTIALSF] = 0x000003ff;
-    s->regs[GEM_MODID] = 0x00020118;
+    s->regs[GEM_MODID] = s->revision;
     s->regs[GEM_DESCONF] = 0x02500111;
     s->regs[GEM_DESCONF2] = 0x2ab13fff;
     s->regs[GEM_DESCONF5] = 0x002f2145;
@@ -1519,6 +1521,8 @@ static const VMStateDescription vmstate_cadence_gem = {
 
 static Property gem_properties[] = {
     DEFINE_NIC_PROPERTIES(CadenceGEMState, conf),
+    DEFINE_PROP_UINT32("revision", CadenceGEMState, revision,
+                       GEM_MODID_VALUE),
     DEFINE_PROP_UINT8("num-priority-queues", CadenceGEMState,
                       num_priority_queues, 1),
     DEFINE_PROP_UINT8("num-type1-screeners", CadenceGEMState,
-- 
2.7.4

[Qemu-devel] [PULL 15/24] xlnx-zynqmp: Set the Cadence GEM revision

[Peter Maydell]

From: Alistair Francis <alistair.francis@xilinx.com>

Signed-off-by: Alistair Francis <alistair.francis@xilinx.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 026dbe01a1d42619eee30ce3f2079741bf04bc73.1491947224.git.alistair.francis@xilinx.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 hw/arm/xlnx-zynqmp.c | 6 +++++-
 1 file changed, 5 insertions(+), 1 deletion(-)

diff --git a/hw/arm/xlnx-zynqmp.c b/hw/arm/xlnx-zynqmp.c
index bc4e66b..e41b6fe 100644
--- a/hw/arm/xlnx-zynqmp.c
+++ b/hw/arm/xlnx-zynqmp.c
@@ -30,6 +30,8 @@
 #define ARM_PHYS_TIMER_PPI  30
 #define ARM_VIRT_TIMER_PPI  27
 
+#define GEM_REVISION        0x40070106
+
 #define GIC_BASE_ADDR       0xf9000000
 #define GIC_DIST_ADDR       0xf9010000
 #define GIC_CPU_ADDR        0xf9020000
@@ -334,8 +336,10 @@ static void xlnx_zynqmp_realize(DeviceState *dev, Error **errp)
             qemu_check_nic_model(nd, TYPE_CADENCE_GEM);
             qdev_set_nic_properties(DEVICE(&s->gem[i]), nd);
         }
+        object_property_set_int(OBJECT(&s->gem[i]), GEM_REVISION, "revision",
+                                &error_abort);
         object_property_set_int(OBJECT(&s->gem[i]), 2, "num-priority-queues",
-                                  &error_abort);
+                                &error_abort);
         object_property_set_bool(OBJECT(&s->gem[i]), true, "realized", &err);
         if (err) {
             error_propagate(errp, err);
-- 
2.7.4

[Qemu-devel] [PULL 16/24] arm: Don't implement BXJ on M-profile CPUs

[Peter Maydell]

For M-profile CPUs, the BXJ instruction does not exist at all, and
the encoding should always UNDEF. We were accidentally implementing
it to behave like A-profile BXJ; correct the error.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Message-id: 1491844419-12485-2-git-send-email-peter.maydell@linaro.org
---
 target/arm/translate.c | 7 ++++++-
 1 file changed, 6 insertions(+), 1 deletion(-)

diff --git a/target/arm/translate.c b/target/arm/translate.c
index e32e38c..fe3f442 100644
--- a/target/arm/translate.c
+++ b/target/arm/translate.c
@@ -10485,7 +10485,12 @@ static int disas_thumb2_insn(CPUARMState *env, DisasContext *s, uint16_t insn_hw
                         }
                         break;
                     case 4: /* bxj */
-                        /* Trivial implementation equivalent to bx.  */
+                        /* Trivial implementation equivalent to bx.
+                         * This instruction doesn't exist at all for M-profile.
+                         */
+                        if (arm_dc_feature(s, ARM_FEATURE_M)) {
+                            goto illegal_op;
+                        }
                         tmp = load_reg(s, rn);
                         gen_bx(s, tmp);
                         break;
-- 
2.7.4

[Qemu-devel] [PULL 17/24] arm: Thumb shift operations should not permit interworking branches

[Peter Maydell]

In Thumb mode, the only instructions which can cause an interworking
branch by writing the PC are BLX, BX, BXJ, LDR, POP and LDM. Unlike
ARM mode, data processing instructions which target the PC do not
cause interworking branches.

When we added support for doing interworking branches on writes to
PC from data processing instructions in commit 21aeb3430ce7ba, we
accidentally changed a Thumb instruction to have interworking
branch behaviour for writes to PC. (MOV, MOVS register-shifted
register, encoding T2; this is the standard encoding for
LSL/LSR/ASR/ROR (register).)

For this encoding, behaviour with Rd == R15 is specified as
UNPREDICTABLE, so allowing an interworking branch is within
spec, but it's confusing and differs from our handling of this
class of UNPREDICTABLE for other Thumb ALU operations. Make
it perform a simple (non-interworking) branch like the others.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 1491844419-12485-3-git-send-email-peter.maydell@linaro.org
---
 target/arm/translate.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/target/arm/translate.c b/target/arm/translate.c
index fe3f442..ddc62b6 100644
--- a/target/arm/translate.c
+++ b/target/arm/translate.c
@@ -9959,7 +9959,7 @@ static int disas_thumb2_insn(CPUARMState *env, DisasContext *s, uint16_t insn_hw
             gen_arm_shift_reg(tmp, op, tmp2, logic_cc);
             if (logic_cc)
                 gen_logic_CC(tmp);
-            store_reg_bx(s, rd, tmp);
+            store_reg(s, rd, tmp);
             break;
         case 1: /* Sign/zero extend.  */
             op = (insn >> 20) & 7;
-- 
2.7.4

[Qemu-devel] [PULL 18/24] arm: Factor out "generate right kind of step exception"

[Peter Maydell]

We currently have two places that do:
            if (dc->ss_active) {
                gen_step_complete_exception(dc);
            } else {
                gen_exception_internal(EXCP_DEBUG);
            }

Factor this out into its own function, as we're about to add
a third place that needs the same logic.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Message-id: 1491844419-12485-4-git-send-email-peter.maydell@linaro.org
---
 target/arm/translate.c | 28 ++++++++++++++++------------
 1 file changed, 16 insertions(+), 12 deletions(-)

diff --git a/target/arm/translate.c b/target/arm/translate.c
index ddc62b6..870e320 100644
--- a/target/arm/translate.c
+++ b/target/arm/translate.c
@@ -296,6 +296,19 @@ static void gen_step_complete_exception(DisasContext *s)
     s->is_jmp = DISAS_EXC;
 }
 
+static void gen_singlestep_exception(DisasContext *s)
+{
+    /* Generate the right kind of exception for singlestep, which is
+     * either the architectural singlestep or EXCP_DEBUG for QEMU's
+     * gdb singlestepping.
+     */
+    if (s->ss_active) {
+        gen_step_complete_exception(s);
+    } else {
+        gen_exception_internal(EXCP_DEBUG);
+    }
+}
+
 static void gen_smul_dual(TCGv_i32 a, TCGv_i32 b)
 {
     TCGv_i32 tmp1 = tcg_temp_new_i32();
@@ -11998,24 +12011,15 @@ void gen_intermediate_code(CPUARMState *env, TranslationBlock *tb)
             gen_set_pc_im(dc, dc->pc);
             /* fall through */
         default:
-            if (dc->ss_active) {
-                gen_step_complete_exception(dc);
-            } else {
-                /* FIXME: Single stepping a WFI insn will not halt
-                   the CPU.  */
-                gen_exception_internal(EXCP_DEBUG);
-            }
+            /* FIXME: Single stepping a WFI insn will not halt the CPU. */
+            gen_singlestep_exception(dc);
         }
         if (dc->condjmp) {
             /* "Condition failed" instruction codepath. */
             gen_set_label(dc->condlabel);
             gen_set_condexec(dc);
             gen_set_pc_im(dc, dc->pc);
-            if (dc->ss_active) {
-                gen_step_complete_exception(dc);
-            } else {
-                gen_exception_internal(EXCP_DEBUG);
-            }
+            gen_singlestep_exception(dc);
         }
     } else {
         /* While branches must always occur at the end of an IT block,
-- 
2.7.4

[Qemu-devel] [PULL 19/24] arm: Move gen_set_condexec() and gen_set_pc_im() up in the file

[Peter Maydell]

Move the utility routines gen_set_condexec() and gen_set_pc_im()
up in the file, as we will want to use them from a function
placed earlier in the file than their current location.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Message-id: 1491844419-12485-5-git-send-email-peter.maydell@linaro.org
---
 target/arm/translate.c | 31 +++++++++++++++----------------
 1 file changed, 15 insertions(+), 16 deletions(-)

diff --git a/target/arm/translate.c b/target/arm/translate.c
index 870e320..a1a0e73 100644
--- a/target/arm/translate.c
+++ b/target/arm/translate.c
@@ -893,6 +893,21 @@ static const uint8_t table_logic_cc[16] = {
     1, /* mvn */
 };
 
+static inline void gen_set_condexec(DisasContext *s)
+{
+    if (s->condexec_mask) {
+        uint32_t val = (s->condexec_cond << 4) | (s->condexec_mask >> 1);
+        TCGv_i32 tmp = tcg_temp_new_i32();
+        tcg_gen_movi_i32(tmp, val);
+        store_cpu_field(tmp, condexec_bits);
+    }
+}
+
+static inline void gen_set_pc_im(DisasContext *s, target_ulong val)
+{
+    tcg_gen_movi_i32(cpu_R[15], val);
+}
+
 /* Set PC and Thumb state from an immediate address.  */
 static inline void gen_bx_im(DisasContext *s, uint32_t addr)
 {
@@ -1069,11 +1084,6 @@ DO_GEN_ST(8, MO_UB)
 DO_GEN_ST(16, MO_UW)
 DO_GEN_ST(32, MO_UL)
 
-static inline void gen_set_pc_im(DisasContext *s, target_ulong val)
-{
-    tcg_gen_movi_i32(cpu_R[15], val);
-}
-
 static inline void gen_hvc(DisasContext *s, int imm16)
 {
     /* The pre HVC helper handles cases when HVC gets trapped
@@ -1107,17 +1117,6 @@ static inline void gen_smc(DisasContext *s)
     s->is_jmp = DISAS_SMC;
 }
 
-static inline void
-gen_set_condexec (DisasContext *s)
-{
-    if (s->condexec_mask) {
-        uint32_t val = (s->condexec_cond << 4) | (s->condexec_mask >> 1);
-        TCGv_i32 tmp = tcg_temp_new_i32();
-        tcg_gen_movi_i32(tmp, val);
-        store_cpu_field(tmp, condexec_bits);
-    }
-}
-
 static void gen_exception_internal_insn(DisasContext *s, int offset, int excp)
 {
     gen_set_condexec(s);
-- 
2.7.4

[Qemu-devel] [PULL 20/24] arm: Move condition-failed codepath generation out of if()

[Peter Maydell]

Move the code to generate the "condition failed" instruction
codepath out of the if (singlestepping) {} else {}. This
will allow adding support for handling a new is_jmp type
which can't be neatly split into "singlestepping case"
versus "not singlestepping case".

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Message-id: 1491844419-12485-6-git-send-email-peter.maydell@linaro.org
---
 target/arm/translate.c | 24 +++++++++++-------------
 1 file changed, 11 insertions(+), 13 deletions(-)

diff --git a/target/arm/translate.c b/target/arm/translate.c
index a1a0e73..87fd702 100644
--- a/target/arm/translate.c
+++ b/target/arm/translate.c
@@ -11988,9 +11988,9 @@ void gen_intermediate_code(CPUARMState *env, TranslationBlock *tb)
     /* At this stage dc->condjmp will only be set when the skipped
        instruction was a conditional branch or trap, and the PC has
        already been written.  */
+    gen_set_condexec(dc);
     if (unlikely(cs->singlestep_enabled || dc->ss_active)) {
         /* Unconditional and "condition passed" instruction codepath. */
-        gen_set_condexec(dc);
         switch (dc->is_jmp) {
         case DISAS_SWI:
             gen_ss_advance(dc);
@@ -12013,13 +12013,6 @@ void gen_intermediate_code(CPUARMState *env, TranslationBlock *tb)
             /* FIXME: Single stepping a WFI insn will not halt the CPU. */
             gen_singlestep_exception(dc);
         }
-        if (dc->condjmp) {
-            /* "Condition failed" instruction codepath. */
-            gen_set_label(dc->condlabel);
-            gen_set_condexec(dc);
-            gen_set_pc_im(dc, dc->pc);
-            gen_singlestep_exception(dc);
-        }
     } else {
         /* While branches must always occur at the end of an IT block,
            there are a few other things that can cause us to terminate
@@ -12029,7 +12022,6 @@ void gen_intermediate_code(CPUARMState *env, TranslationBlock *tb)
             - Hardware watchpoints.
            Hardware breakpoints have already been handled and skip this code.
          */
-        gen_set_condexec(dc);
         switch(dc->is_jmp) {
         case DISAS_NEXT:
             gen_goto_tb(dc, 1, dc->pc);
@@ -12069,11 +12061,17 @@ void gen_intermediate_code(CPUARMState *env, TranslationBlock *tb)
             gen_exception(EXCP_SMC, syn_aa32_smc(), 3);
             break;
         }
-        if (dc->condjmp) {
-            gen_set_label(dc->condlabel);
-            gen_set_condexec(dc);
+    }
+
+    if (dc->condjmp) {
+        /* "Condition failed" instruction codepath for the branch/trap insn */
+        gen_set_label(dc->condlabel);
+        gen_set_condexec(dc);
+        if (unlikely(cs->singlestep_enabled || dc->ss_active)) {
+            gen_set_pc_im(dc, dc->pc);
+            gen_singlestep_exception(dc);
+        } else {
             gen_goto_tb(dc, 1, dc->pc);
-            dc->condjmp = 0;
         }
     }
 
-- 
2.7.4

[Qemu-devel] [PULL 21/24] arm: Abstract out "are we singlestepping" test to utility function

[Peter Maydell]

We now test for "are we singlestepping" in several places and
it's not a trivial check because we need to care about both
architectural singlestep and QEMU gdbstub singlestep. We're
also about to add another place that needs to make this check,
so pull the condition out into a function.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 1491844419-12485-7-git-send-email-peter.maydell@linaro.org
---
 target/arm/translate.c | 20 +++++++++++++++-----
 1 file changed, 15 insertions(+), 5 deletions(-)

diff --git a/target/arm/translate.c b/target/arm/translate.c
index 87fd702..f28c4ca 100644
--- a/target/arm/translate.c
+++ b/target/arm/translate.c
@@ -309,6 +309,17 @@ static void gen_singlestep_exception(DisasContext *s)
     }
 }
 
+static inline bool is_singlestepping(DisasContext *s)
+{
+    /* Return true if we are singlestepping either because of
+     * architectural singlestep or QEMU gdbstub singlestep. This does
+     * not include the command line '-singlestep' mode which is rather
+     * misnamed as it only means "one instruction per TB" and doesn't
+     * affect the code we generate.
+     */
+    return s->singlestep_enabled || s->ss_active;
+}
+
 static void gen_smul_dual(TCGv_i32 a, TCGv_i32 b)
 {
     TCGv_i32 tmp1 = tcg_temp_new_i32();
@@ -4104,7 +4115,7 @@ static inline void gen_goto_tb(DisasContext *s, int n, target_ulong dest)
 
 static inline void gen_jmp (DisasContext *s, uint32_t dest)
 {
-    if (unlikely(s->singlestep_enabled || s->ss_active)) {
+    if (unlikely(is_singlestepping(s))) {
         /* An indirect jump so that we still trigger the debug exception.  */
         if (s->thumb)
             dest |= 1;
@@ -11970,9 +11981,8 @@ void gen_intermediate_code(CPUARMState *env, TranslationBlock *tb)
             ((dc->pc >= next_page_start - 3) && insn_crosses_page(env, dc));
 
     } while (!dc->is_jmp && !tcg_op_buf_full() &&
-             !cs->singlestep_enabled &&
+             !is_singlestepping(dc) &&
              !singlestep &&
-             !dc->ss_active &&
              !end_of_page &&
              num_insns < max_insns);
 
@@ -11989,7 +11999,7 @@ void gen_intermediate_code(CPUARMState *env, TranslationBlock *tb)
        instruction was a conditional branch or trap, and the PC has
        already been written.  */
     gen_set_condexec(dc);
-    if (unlikely(cs->singlestep_enabled || dc->ss_active)) {
+    if (unlikely(is_singlestepping(dc))) {
         /* Unconditional and "condition passed" instruction codepath. */
         switch (dc->is_jmp) {
         case DISAS_SWI:
@@ -12067,7 +12077,7 @@ void gen_intermediate_code(CPUARMState *env, TranslationBlock *tb)
         /* "Condition failed" instruction codepath for the branch/trap insn */
         gen_set_label(dc->condlabel);
         gen_set_condexec(dc);
-        if (unlikely(cs->singlestep_enabled || dc->ss_active)) {
+        if (unlikely(is_singlestepping(dc))) {
             gen_set_pc_im(dc, dc->pc);
             gen_singlestep_exception(dc);
         } else {
-- 
2.7.4

[Qemu-devel] [PULL 22/24] arm: Track M profile handler mode state in TB flags

[Peter Maydell]

For M profile exception-return handling we'd like to generate different
code for some instructions depending on whether we are in Handler
mode or Thread mode. This isn't the same as "are we privileged
or user", so we need an extra bit in the TB flags to distinguish.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 1491844419-12485-8-git-send-email-peter.maydell@linaro.org
---
 target/arm/cpu.h       | 9 +++++++++
 target/arm/translate.h | 1 +
 target/arm/translate.c | 1 +
 3 files changed, 11 insertions(+)

diff --git a/target/arm/cpu.h b/target/arm/cpu.h
index ab86943..1055bfe 100644
--- a/target/arm/cpu.h
+++ b/target/arm/cpu.h
@@ -2291,6 +2291,9 @@ static inline bool arm_cpu_data_is_big_endian(CPUARMState *env)
 #define ARM_TBFLAG_NS_MASK          (1 << ARM_TBFLAG_NS_SHIFT)
 #define ARM_TBFLAG_BE_DATA_SHIFT    20
 #define ARM_TBFLAG_BE_DATA_MASK     (1 << ARM_TBFLAG_BE_DATA_SHIFT)
+/* For M profile only, Handler (ie not Thread) mode */
+#define ARM_TBFLAG_HANDLER_SHIFT    21
+#define ARM_TBFLAG_HANDLER_MASK     (1 << ARM_TBFLAG_HANDLER_SHIFT)
 
 /* Bit usage when in AArch64 state */
 #define ARM_TBFLAG_TBI0_SHIFT 0        /* TBI0 for EL0/1 or TBI for EL2/3 */
@@ -2327,6 +2330,8 @@ static inline bool arm_cpu_data_is_big_endian(CPUARMState *env)
     (((F) & ARM_TBFLAG_NS_MASK) >> ARM_TBFLAG_NS_SHIFT)
 #define ARM_TBFLAG_BE_DATA(F) \
     (((F) & ARM_TBFLAG_BE_DATA_MASK) >> ARM_TBFLAG_BE_DATA_SHIFT)
+#define ARM_TBFLAG_HANDLER(F) \
+    (((F) & ARM_TBFLAG_HANDLER_MASK) >> ARM_TBFLAG_HANDLER_SHIFT)
 #define ARM_TBFLAG_TBI0(F) \
     (((F) & ARM_TBFLAG_TBI0_MASK) >> ARM_TBFLAG_TBI0_SHIFT)
 #define ARM_TBFLAG_TBI1(F) \
@@ -2517,6 +2522,10 @@ static inline void cpu_get_tb_cpu_state(CPUARMState *env, target_ulong *pc,
     }
     *flags |= fp_exception_el(env) << ARM_TBFLAG_FPEXC_EL_SHIFT;
 
+    if (env->v7m.exception != 0) {
+        *flags |= ARM_TBFLAG_HANDLER_MASK;
+    }
+
     *cs_base = 0;
 }
 
diff --git a/target/arm/translate.h b/target/arm/translate.h
index abb0760..3d0e8a6 100644
--- a/target/arm/translate.h
+++ b/target/arm/translate.h
@@ -31,6 +31,7 @@ typedef struct DisasContext {
     bool vfp_enabled; /* FP enabled via FPSCR.EN */
     int vec_len;
     int vec_stride;
+    bool v7m_handler_mode;
     /* Immediate value in AArch32 SVC insn; must be set if is_jmp == DISAS_SWI
      * so that top level loop can generate correct syndrome information.
      */
diff --git a/target/arm/translate.c b/target/arm/translate.c
index f28c4ca..4fe7692 100644
--- a/target/arm/translate.c
+++ b/target/arm/translate.c
@@ -11780,6 +11780,7 @@ void gen_intermediate_code(CPUARMState *env, TranslationBlock *tb)
     dc->vec_len = ARM_TBFLAG_VECLEN(tb->flags);
     dc->vec_stride = ARM_TBFLAG_VECSTRIDE(tb->flags);
     dc->c15_cpar = ARM_TBFLAG_XSCALE_CPAR(tb->flags);
+    dc->v7m_handler_mode = ARM_TBFLAG_HANDLER(tb->flags);
     dc->cp_regs = cpu->cp_regs;
     dc->features = env->features;
 
-- 
2.7.4

[Qemu-devel] [PULL 23/24] arm: Implement M profile exception return properly

[Peter Maydell]

On M profile, return from exceptions happen when code in Handler mode
executes one of the following function call return instructions:
 * POP or LDM which loads the PC
 * LDR to PC
 * BX register
and the new PC value is 0xFFxxxxxx.

QEMU tries to implement this by not treating the instruction
specially but then catching the attempt to execute from the magic
address value.  This is not ideal, because:
 * there are guest visible differences from the architecturally
   specified behaviour (for instance jumping to 0xFFxxxxxx via a
   different instruction should not cause an exception return but it
   will in the QEMU implementation)
 * we have to account for it in various places (like refusing to take
   an interrupt if the PC is at a magic value, and making sure that
   the MPU doesn't deny execution at the magic value addresses)

Drop these hacks, and instead implement exception return the way the
architecture specifies -- by having the relevant instructions check
for the magic value and raise the 'do an exception return' QEMU
internal exception immediately.

The effect on the generated code is minor:

 bx lr, old code (and new code for Thread mode):
  TCG:
   mov_i32 tmp5,r14
   movi_i32 tmp6,$0xfffffffffffffffe
   and_i32 pc,tmp5,tmp6
   movi_i32 tmp6,$0x1
   and_i32 tmp5,tmp5,tmp6
   st_i32 tmp5,env,$0x218
   exit_tb $0x0
   set_label $L0
   exit_tb $0x7f2aabd61993
  x86_64 generated code:
   0x7f2aabe87019:  mov    %ebx,%ebp
   0x7f2aabe8701b:  and    $0xfffffffffffffffe,%ebp
   0x7f2aabe8701e:  mov    %ebp,0x3c(%r14)
   0x7f2aabe87022:  and    $0x1,%ebx
   0x7f2aabe87025:  mov    %ebx,0x218(%r14)
   0x7f2aabe8702c:  xor    %eax,%eax
   0x7f2aabe8702e:  jmpq   0x7f2aabe7c016

 bx lr, new code when in Handler mode:
  TCG:
   mov_i32 tmp5,r14
   movi_i32 tmp6,$0xfffffffffffffffe
   and_i32 pc,tmp5,tmp6
   movi_i32 tmp6,$0x1
   and_i32 tmp5,tmp5,tmp6
   st_i32 tmp5,env,$0x218
   movi_i32 tmp5,$0xffffffffff000000
   brcond_i32 pc,tmp5,geu,$L1
   exit_tb $0x0
   set_label $L1
   movi_i32 tmp5,$0x8
   call exception_internal,$0x0,$0,env,tmp5
  x86_64 generated code:
   0x7fe8fa1264e3:  mov    %ebp,%ebx
   0x7fe8fa1264e5:  and    $0xfffffffffffffffe,%ebx
   0x7fe8fa1264e8:  mov    %ebx,0x3c(%r14)
   0x7fe8fa1264ec:  and    $0x1,%ebp
   0x7fe8fa1264ef:  mov    %ebp,0x218(%r14)
   0x7fe8fa1264f6:  cmp    $0xff000000,%ebx
   0x7fe8fa1264fc:  jae    0x7fe8fa126509
   0x7fe8fa126502:  xor    %eax,%eax
   0x7fe8fa126504:  jmpq   0x7fe8fa122016
   0x7fe8fa126509:  mov    %r14,%rdi
   0x7fe8fa12650c:  mov    $0x8,%esi
   0x7fe8fa126511:  mov    $0x56095dbeccf5,%r10
   0x7fe8fa12651b:  callq  *%r10

which is a difference of one cmp/branch-not-taken. This will
be lost in the noise of having to exit generated code and
look up the next TB anyway.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 1491844419-12485-9-git-send-email-peter.maydell@linaro.org
---
 target/arm/translate.h |  4 +++
 target/arm/translate.c | 66 +++++++++++++++++++++++++++++++++++++++++++++-----
 2 files changed, 64 insertions(+), 6 deletions(-)

diff --git a/target/arm/translate.h b/target/arm/translate.h
index 3d0e8a6..629dab9 100644
--- a/target/arm/translate.h
+++ b/target/arm/translate.h
@@ -135,6 +135,10 @@ static void disas_set_insn_syndrome(DisasContext *s, uint32_t syn)
 #define DISAS_HVC 8
 #define DISAS_SMC 9
 #define DISAS_YIELD 10
+/* M profile branch which might be an exception return (and so needs
+ * custom end-of-TB code)
+ */
+#define DISAS_BX_EXCRET 11
 
 #ifdef TARGET_AARCH64
 void a64_translate_init(void);
diff --git a/target/arm/translate.c b/target/arm/translate.c
index 4fe7692..da03e153 100644
--- a/target/arm/translate.c
+++ b/target/arm/translate.c
@@ -943,6 +943,51 @@ static inline void gen_bx(DisasContext *s, TCGv_i32 var)
     store_cpu_field(var, thumb);
 }
 
+/* Set PC and Thumb state from var. var is marked as dead.
+ * For M-profile CPUs, include logic to detect exception-return
+ * branches and handle them. This is needed for Thumb POP/LDM to PC, LDR to PC,
+ * and BX reg, and no others, and happens only for code in Handler mode.
+ */
+static inline void gen_bx_excret(DisasContext *s, TCGv_i32 var)
+{
+    /* Generate the same code here as for a simple bx, but flag via
+     * s->is_jmp that we need to do the rest of the work later.
+     */
+    gen_bx(s, var);
+    if (s->v7m_handler_mode && arm_dc_feature(s, ARM_FEATURE_M)) {
+        s->is_jmp = DISAS_BX_EXCRET;
+    }
+}
+
+static inline void gen_bx_excret_final_code(DisasContext *s)
+{
+    /* Generate the code to finish possible exception return and end the TB */
+    TCGLabel *excret_label = gen_new_label();
+
+    /* Is the new PC value in the magic range indicating exception return? */
+    tcg_gen_brcondi_i32(TCG_COND_GEU, cpu_R[15], 0xff000000, excret_label);
+    /* No: end the TB as we would for a DISAS_JMP */
+    if (is_singlestepping(s)) {
+        gen_singlestep_exception(s);
+    } else {
+        tcg_gen_exit_tb(0);
+    }
+    gen_set_label(excret_label);
+    /* Yes: this is an exception return.
+     * At this point in runtime env->regs[15] and env->thumb will hold
+     * the exception-return magic number, which do_v7m_exception_exit()
+     * will read. Nothing else will be able to see those values because
+     * the cpu-exec main loop guarantees that we will always go straight
+     * from raising the exception to the exception-handling code.
+     *
+     * gen_ss_advance(s) does nothing on M profile currently but
+     * calling it is conceptually the right thing as we have executed
+     * this instruction (compare SWI, HVC, SMC handling).
+     */
+    gen_ss_advance(s);
+    gen_exception_internal(EXCP_EXCEPTION_EXIT);
+}
+
 /* Variant of store_reg which uses branch&exchange logic when storing
    to r15 in ARM architecture v7 and above. The source must be a temporary
    and will be marked as dead. */
@@ -962,7 +1007,7 @@ static inline void store_reg_bx(DisasContext *s, int reg, TCGv_i32 var)
 static inline void store_reg_from_load(DisasContext *s, int reg, TCGv_i32 var)
 {
     if (reg == 15 && ENABLE_ARCH_5) {
-        gen_bx(s, var);
+        gen_bx_excret(s, var);
     } else {
         store_reg(s, reg, var);
     }
@@ -9881,7 +9926,7 @@ static int disas_thumb2_insn(CPUARMState *env, DisasContext *s, uint16_t insn_hw
                         tmp = tcg_temp_new_i32();
                         gen_aa32_ld32u(s, tmp, addr, get_mem_index(s));
                         if (i == 15) {
-                            gen_bx(s, tmp);
+                            gen_bx_excret(s, tmp);
                         } else if (i == rn) {
                             loaded_var = tmp;
                             loaded_base = 1;
@@ -10913,7 +10958,7 @@ static int disas_thumb2_insn(CPUARMState *env, DisasContext *s, uint16_t insn_hw
                 goto illegal_op;
             }
             if (rs == 15) {
-                gen_bx(s, tmp);
+                gen_bx_excret(s, tmp);
             } else {
                 store_reg(s, rs, tmp);
             }
@@ -11103,9 +11148,11 @@ static void disas_thumb_insn(CPUARMState *env, DisasContext *s)
                     tmp2 = tcg_temp_new_i32();
                     tcg_gen_movi_i32(tmp2, val);
                     store_reg(s, 14, tmp2);
+                    gen_bx(s, tmp);
+                } else {
+                    /* Only BX works as exception-return, not BLX */
+                    gen_bx_excret(s, tmp);
                 }
-                /* already thumb, no need to check */
-                gen_bx(s, tmp);
                 break;
             }
             break;
@@ -12000,7 +12047,14 @@ void gen_intermediate_code(CPUARMState *env, TranslationBlock *tb)
        instruction was a conditional branch or trap, and the PC has
        already been written.  */
     gen_set_condexec(dc);
-    if (unlikely(is_singlestepping(dc))) {
+    if (dc->is_jmp == DISAS_BX_EXCRET) {
+        /* Exception return branches need some special case code at the
+         * end of the TB, which is complex enough that it has to
+         * handle the single-step vs not and the condition-failed
+         * insn codepath itself.
+         */
+        gen_bx_excret_final_code(dc);
+    } else if (unlikely(is_singlestepping(dc))) {
         /* Unconditional and "condition passed" instruction codepath. */
         switch (dc->is_jmp) {
         case DISAS_SWI:
-- 
2.7.4

[Qemu-devel] [PULL 24/24] arm: Remove workarounds for old M-profile exception return implementation

[Peter Maydell]

Now that we've rewritten M-profile exception return so that the magic
PC values are not visible to other parts of QEMU, we can delete the
special casing of them elsewhere.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Message-id: 1491844419-12485-10-git-send-email-peter.maydell@linaro.org
---
 target/arm/cpu.c       | 43 ++-----------------------------------------
 target/arm/translate.c |  8 --------
 2 files changed, 2 insertions(+), 49 deletions(-)

diff --git a/target/arm/cpu.c b/target/arm/cpu.c
index 04b062c..b357aee 100644
--- a/target/arm/cpu.c
+++ b/target/arm/cpu.c
@@ -304,33 +304,6 @@ bool arm_cpu_exec_interrupt(CPUState *cs, int interrupt_request)
 }
 
 #if !defined(CONFIG_USER_ONLY) || !defined(TARGET_AARCH64)
-static void arm_v7m_unassigned_access(CPUState *cpu, hwaddr addr,
-                                      bool is_write, bool is_exec, int opaque,
-                                      unsigned size)
-{
-    ARMCPU *arm = ARM_CPU(cpu);
-    CPUARMState *env = &arm->env;
-
-    /* ARMv7-M interrupt return works by loading a magic value into the PC.
-     * On real hardware the load causes the return to occur.  The qemu
-     * implementation performs the jump normally, then does the exception
-     * return by throwing a special exception when when the CPU tries to
-     * execute code at the magic address.
-     */
-    if (env->v7m.exception != 0 && addr >= 0xfffffff0 && is_exec) {
-        cpu->exception_index = EXCP_EXCEPTION_EXIT;
-        cpu_loop_exit(cpu);
-    }
-
-    /* In real hardware an attempt to access parts of the address space
-     * with nothing there will usually cause an external abort.
-     * However our QEMU board models are often missing device models where
-     * the guest can boot anyway with the default read-as-zero/writes-ignored
-     * behaviour that you get without a QEMU unassigned_access hook.
-     * So just return here to retain that default behaviour.
-     */
-}
-
 static bool arm_v7m_cpu_exec_interrupt(CPUState *cs, int interrupt_request)
 {
     CPUClass *cc = CPU_GET_CLASS(cs);
@@ -338,17 +311,7 @@ static bool arm_v7m_cpu_exec_interrupt(CPUState *cs, int interrupt_request)
     CPUARMState *env = &cpu->env;
     bool ret = false;
 
-    /* ARMv7-M interrupt return works by loading a magic value
-     * into the PC.  On real hardware the load causes the
-     * return to occur.  The qemu implementation performs the
-     * jump normally, then does the exception return when the
-     * CPU tries to execute code at the magic address.
-     * This will cause the magic PC value to be pushed to
-     * the stack if an interrupt occurred at the wrong time.
-     * We avoid this by disabling interrupts when
-     * pc contains a magic address.
-     *
-     * ARMv7-M interrupt masking works differently than -A or -R.
+    /* ARMv7-M interrupt masking works differently than -A or -R.
      * There is no FIQ/IRQ distinction. Instead of I and F bits
      * masking FIQ and IRQ interrupts, an exception is taken only
      * if it is higher priority than the current execution priority
@@ -356,8 +319,7 @@ static bool arm_v7m_cpu_exec_interrupt(CPUState *cs, int interrupt_request)
      * currently active exception).
      */
     if (interrupt_request & CPU_INTERRUPT_HARD
-        && (armv7m_nvic_can_take_pending_exception(env->nvic))
-        && (env->regs[15] < 0xfffffff0)) {
+        && (armv7m_nvic_can_take_pending_exception(env->nvic))) {
         cs->exception_index = EXCP_IRQ;
         cc->do_interrupt(cs);
         ret = true;
@@ -1091,7 +1053,6 @@ static void arm_v7m_class_init(ObjectClass *oc, void *data)
     cc->do_interrupt = arm_v7m_cpu_do_interrupt;
 #endif
 
-    cc->do_unassigned_access = arm_v7m_unassigned_access;
     cc->cpu_exec_interrupt = arm_v7m_cpu_exec_interrupt;
 }
 
diff --git a/target/arm/translate.c b/target/arm/translate.c
index da03e153..0b5a0bc 100644
--- a/target/arm/translate.c
+++ b/target/arm/translate.c
@@ -11927,14 +11927,6 @@ void gen_intermediate_code(CPUARMState *env, TranslationBlock *tb)
             dc->is_jmp = DISAS_EXC;
             break;
         }
-#else
-        if (arm_dc_feature(dc, ARM_FEATURE_M)) {
-            /* Branches to the magic exception-return addresses should
-             * already have been caught via the arm_v7m_unassigned_access hook,
-             * and never get here.
-             */
-            assert(dc->pc < 0xfffffff0);
-        }
 #endif
 
         if (unlikely(!QTAILQ_EMPTY(&cs->breakpoints))) {
-- 
2.7.4

Re: [Qemu-devel] [PULL 00/24] target-arm queue

[Peter Maydell]

On 20 April 2017 at 17:40, Peter Maydell <peter.maydell@linaro.org> wrote:
> First ARM pullreq of the 2.10 cycle...
>
> thanks
> -- PMM
>
> The following changes since commit 64c8ed97cceabac4fafe17fca8d88ef08183f439:
>
>   Open 2.10 development tree (2017-04-20 15:42:31 +0100)
>
> are available in the git repository at:
>
>   git://git.linaro.org/people/pmaydell/qemu-arm.git tags/pull-target-arm-20170420
>
> for you to fetch changes up to f4e8e4edda875cab9df91dc4ae9767f7cb1f50aa:
>
>   arm: Remove workarounds for old M-profile exception return implementation (2017-04-20 17:39:17 +0100)
>
> ----------------------------------------------------------------
> target-arm queue:
>  * implement M profile exception return properly
>  * cadence GEM: fix multiqueue handling bugs
>  * pxa2xx.c: QOMify a device
>  * arm/kvm: Remove trailing newlines from error_report()
>  * stellaris: Don't hw_error() on bad register accesses
>  * Add assertion about FSC format for syndrome registers
>  * Move excnames[] array into arm_log_exceptions()
>  * exynos: minor code cleanups
>  * hw/arm/boot: take Linux/arm64 TEXT_OFFSET header field into account
>  * Fix APSR writes via M profile MSR
>
> ----------------------------------------------------------------
> Alistair Francis (5):
>       cadence_gem: Read the correct queue descriptor
>       cadence_gem: Correct the multi-queue can rx logic
>       cadence_gem: Correct the interupt logic
>       cadence_gem: Make the revision a property
>       xlnx-zynqmp: Set the Cadence GEM revision
>
> Ard Biesheuvel (1):
>       hw/arm/boot: take Linux/arm64 TEXT_OFFSET header field into account
>
> Ishani Chugh (1):
>       arm/kvm: Remove trailing newlines from error_report()
>
> Krzysztof Kozlowski (3):
>       hw/arm/exynos: Convert fprintf to qemu_log_mask/error_report
>       hw/char/exynos4210_uart: Constify static array and few arguments
>       hw/misc/exynos4210_pmu: Reorder local variables for readability
>
> Peter Maydell (13):
>       target/arm: Add missing entries to excnames[] for log strings
>       arm: Move excnames[] array into arm_log_exceptions()
>       target/arm: Add assertion about FSC format for syndrome registers
>       stellaris: Don't hw_error() on bad register accesses
>       arm: Don't implement BXJ on M-profile CPUs
>       arm: Thumb shift operations should not permit interworking branches
>       arm: Factor out "generate right kind of step exception"
>       arm: Move gen_set_condexec() and gen_set_pc_im() up in the file
>       arm: Move condition-failed codepath generation out of if()
>       arm: Abstract out "are we singlestepping" test to utility function
>       arm: Track M profile handler mode state in TB flags
>       arm: Implement M profile exception return properly
>       arm: Remove workarounds for old M-profile exception return implementation
>
> Suramya Shah (1):
>       hw/arm: Qomify pxa2xx.c
>

Applied, thanks.

-- PMM