From: Kevin Wolf <kwolf@redhat.com>
To: qemu-block@nongnu.org
Cc: kwolf@redhat.com, qemu-devel@nongnu.org
Subject: [Qemu-devel] [PULL 21/34] qemu-img/convert: Move bs_n > 1 && -B check down
Date: Fri, 28 Apr 2017 22:33:29 +0200 [thread overview]
Message-ID: <1493411622-5343-22-git-send-email-kwolf@redhat.com> (raw)
In-Reply-To: <1493411622-5343-1-git-send-email-kwolf@redhat.com>
From: Max Reitz <mreitz@redhat.com>
It does not make much sense to use a backing image for the target when
you concatenate multiple images (because then there is no correspondence
between the source images' backing files and the target's); but it was
still possible to give one by using -o backing_file=X instead of -B X.
Fix this by moving the check.
(Also, change the error message because -B is not the only way to
specify the backing file, evidently.)
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
---
qemu-img.c | 13 +++++++------
tests/qemu-iotests/122.out | 4 ++--
2 files changed, 9 insertions(+), 8 deletions(-)
diff --git a/qemu-img.c b/qemu-img.c
index e0503ae..7044884 100644
--- a/qemu-img.c
+++ b/qemu-img.c
@@ -2089,12 +2089,6 @@ static int img_convert(int argc, char **argv)
}
- if (s.src_num > 1 && out_baseimg) {
- error_report("-B makes no sense when concatenating multiple input "
- "images");
- goto fail_getopt;
- }
-
/* ret is still -EINVAL until here */
ret = bdrv_parse_cache_mode(src_cache, &src_flags, &src_writethrough);
if (ret < 0) {
@@ -2208,6 +2202,13 @@ static int img_convert(int argc, char **argv)
}
s.target_has_backing = (bool) out_baseimg;
+ if (s.src_num > 1 && out_baseimg) {
+ error_report("Having a backing file for the target makes no sense when "
+ "concatenating multiple input images");
+ ret = -1;
+ goto out;
+ }
+
/* Check if compression is supported */
if (s.compressed) {
bool encryption =
diff --git a/tests/qemu-iotests/122.out b/tests/qemu-iotests/122.out
index 98814de..9317d80 100644
--- a/tests/qemu-iotests/122.out
+++ b/tests/qemu-iotests/122.out
@@ -61,8 +61,8 @@ read 65536/65536 bytes at offset 4194304
64 KiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
read 65536/65536 bytes at offset 8388608
64 KiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
-qemu-img: -B makes no sense when concatenating multiple input images
-qemu-img: -B makes no sense when concatenating multiple input images
+qemu-img: Having a backing file for the target makes no sense when concatenating multiple input images
+qemu-img: Having a backing file for the target makes no sense when concatenating multiple input images
=== Compression with misaligned allocations and image sizes ===
--
1.8.3.1
next prev parent reply other threads:[~2017-04-28 20:34 UTC|newest]
Thread overview: 39+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-04-28 20:33 [Qemu-devel] [PULL 00/34] Block layer patches Kevin Wolf
2017-04-28 20:33 ` [Qemu-devel] [PULL 01/34] block: Constify data passed by pointer to blk_name Kevin Wolf
2017-04-28 20:33 ` [Qemu-devel] [PULL 02/34] file-posix: Remove unnecessary includes Kevin Wolf
2017-04-28 20:33 ` [Qemu-devel] [PULL 03/34] file-win32: Remove unnecessary include Kevin Wolf
2017-04-28 20:33 ` [Qemu-devel] [PULL 04/34] Revert "block/io: Comment out permission assertions" Kevin Wolf
2017-04-29 12:41 ` Paolo Bonzini
2017-04-28 20:33 ` [Qemu-devel] [PULL 05/34] qemu-img: simplify img_convert Kevin Wolf
2017-04-28 20:33 ` [Qemu-devel] [PULL 06/34] migration: Call blk_resume_after_migration() for postcopy Kevin Wolf
2017-04-28 20:33 ` [Qemu-devel] [PULL 07/34] qemu-iotests: Filter HMP readline escape characters Kevin Wolf
2017-04-28 20:33 ` [Qemu-devel] [PULL 08/34] qemu-iotests: Test postcopy migration Kevin Wolf
2017-04-28 20:33 ` [Qemu-devel] [PULL 09/34] block: An empty filename counts as no filename Kevin Wolf
2017-04-28 20:33 ` [Qemu-devel] [PULL 10/34] iotests/051: Add test for empty filename Kevin Wolf
2017-04-28 20:33 ` [Qemu-devel] [PULL 11/34] qemu-iotests: Remove PERL_PROG and BC_PROG Kevin Wolf
2017-04-28 20:33 ` [Qemu-devel] [PULL 12/34] qemu_iotests: Remove _readlink() Kevin Wolf
2017-04-28 20:33 ` [Qemu-devel] [PULL 13/34] block: Remove NULL check in bdrv_co_flush Kevin Wolf
2017-04-28 20:33 ` [Qemu-devel] [PULL 14/34] iotests: Launch qemu-nbd with -e 42 Kevin Wolf
2017-04-28 22:08 ` Eric Blake
2017-05-03 14:12 ` Kevin Wolf
2017-04-28 20:33 ` [Qemu-devel] [PULL 15/34] Issue a deprecation warning if the user specifies the "-hdachs" option Kevin Wolf
2017-04-28 20:33 ` [Qemu-devel] [PULL 16/34] iotests: Fix typo in 026 Kevin Wolf
2017-04-28 20:33 ` [Qemu-devel] [PULL 17/34] iotests: 109: Filter out "len" of failed jobs Kevin Wolf
2017-04-28 20:33 ` [Qemu-devel] [PULL 18/34] block: Do not unref bs->file on error in BD's open Kevin Wolf
2017-04-28 20:33 ` [Qemu-devel] [PULL 19/34] block: fix alignment calculations in bdrv_co_do_zero_pwritev Kevin Wolf
2017-04-28 20:33 ` [Qemu-devel] [PULL 20/34] qemu-img/convert: Use @opts for one thing only Kevin Wolf
2017-04-28 20:33 ` Kevin Wolf [this message]
2017-04-28 20:33 ` [Qemu-devel] [PULL 22/34] qemu-img: Document backing options Kevin Wolf
2017-04-28 20:33 ` [Qemu-devel] [PULL 23/34] block/vhdx: Make vhdx_create() always set errp Kevin Wolf
2017-04-28 20:33 ` [Qemu-devel] [PULL 24/34] block: Add errp to b{lk,drv}_truncate() Kevin Wolf
2017-04-28 20:33 ` [Qemu-devel] [PULL 25/34] block: Add errp to BD.bdrv_truncate() Kevin Wolf
2017-04-28 20:33 ` [Qemu-devel] [PULL 26/34] block: Add .bdrv_truncate() error messages Kevin Wolf
2017-04-28 20:33 ` [Qemu-devel] [PULL 27/34] qcow2: Allow discard of final unaligned cluster Kevin Wolf
2017-04-28 20:33 ` [Qemu-devel] [PULL 28/34] block: fix obvious coding style mistakes in block_int.h Kevin Wolf
2017-04-28 20:33 ` [Qemu-devel] [PULL 29/34] block: assert no image modification under BDRV_O_INACTIVE Kevin Wolf
2017-04-28 20:33 ` [Qemu-devel] [PULL 30/34] qemu-img: improve convert_iteration_sectors() Kevin Wolf
2017-04-28 20:33 ` [Qemu-devel] [PULL 31/34] qemu-img: use blk_co_pwrite_zeroes for zero sectors when compressed Kevin Wolf
2017-04-28 20:33 ` [Qemu-devel] [PULL 32/34] iotests: clarify help text Kevin Wolf
2017-04-28 20:33 ` [Qemu-devel] [PULL 33/34] iotests: fix exclusion option Kevin Wolf
2017-04-28 20:33 ` [Qemu-devel] [PULL 34/34] progress: Show current progress on SIGINFO Kevin Wolf
2017-05-04 12:46 ` [Qemu-devel] [Qemu-block] [PULL 00/34] Block layer patches Stefan Hajnoczi
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1493411622-5343-22-git-send-email-kwolf@redhat.com \
--to=kwolf@redhat.com \
--cc=qemu-block@nongnu.org \
--cc=qemu-devel@nongnu.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).