From: Pradeep Jagadeesh <pradeepkiruvale@gmail.com>
To: eric blake <eblake@redhat.com>, greg kurz <groug@kaod.org>
Cc: Pradeep Jagadeesh <pradeep.jagadeesh@huawei.com>,
alberto garcia <berto@igalia.com>,
jani kokkonen <jani.kokkonen@huawei.com>,
qemu-devel@nongnu.org
Subject: [Qemu-devel] [PATCH v3 4/4] throttle: factor out duplicate code
Date: Tue, 2 May 2017 10:29:46 -0400 [thread overview]
Message-ID: <1493735386-39622-5-git-send-email-pradeep.jagadeesh@huawei.com> (raw)
In-Reply-To: <1493735386-39622-1-git-send-email-pradeep.jagadeesh@huawei.com>
This patchset factor out the duplicate throttle code that was present in
block and fsdev devices.
Signed-off-by: Pradeep Jagadeesh <pradeep.jagadeesh@huawei.com>
---
blockdev.c | 44 +-------------------------------------
fsdev/qemu-fsdev-throttle.c | 43 +------------------------------------
include/qemu/throttle-options.h | 2 ++
util/throttle-options.c | 47 +++++++++++++++++++++++++++++++++++++++++
4 files changed, 51 insertions(+), 85 deletions(-)
diff --git a/blockdev.c b/blockdev.c
index b056788..a55f6be 100644
--- a/blockdev.c
+++ b/blockdev.c
@@ -386,49 +386,7 @@ static void extract_common_blockdev_options(QemuOpts *opts, int *bdrv_flags,
}
if (throttle_cfg) {
- throttle_config_init(throttle_cfg);
- throttle_cfg->buckets[THROTTLE_BPS_TOTAL].avg =
- qemu_opt_get_number(opts, "throttling.bps-total", 0);
- throttle_cfg->buckets[THROTTLE_BPS_READ].avg =
- qemu_opt_get_number(opts, "throttling.bps-read", 0);
- throttle_cfg->buckets[THROTTLE_BPS_WRITE].avg =
- qemu_opt_get_number(opts, "throttling.bps-write", 0);
- throttle_cfg->buckets[THROTTLE_OPS_TOTAL].avg =
- qemu_opt_get_number(opts, "throttling.iops-total", 0);
- throttle_cfg->buckets[THROTTLE_OPS_READ].avg =
- qemu_opt_get_number(opts, "throttling.iops-read", 0);
- throttle_cfg->buckets[THROTTLE_OPS_WRITE].avg =
- qemu_opt_get_number(opts, "throttling.iops-write", 0);
-
- throttle_cfg->buckets[THROTTLE_BPS_TOTAL].max =
- qemu_opt_get_number(opts, "throttling.bps-total-max", 0);
- throttle_cfg->buckets[THROTTLE_BPS_READ].max =
- qemu_opt_get_number(opts, "throttling.bps-read-max", 0);
- throttle_cfg->buckets[THROTTLE_BPS_WRITE].max =
- qemu_opt_get_number(opts, "throttling.bps-write-max", 0);
- throttle_cfg->buckets[THROTTLE_OPS_TOTAL].max =
- qemu_opt_get_number(opts, "throttling.iops-total-max", 0);
- throttle_cfg->buckets[THROTTLE_OPS_READ].max =
- qemu_opt_get_number(opts, "throttling.iops-read-max", 0);
- throttle_cfg->buckets[THROTTLE_OPS_WRITE].max =
- qemu_opt_get_number(opts, "throttling.iops-write-max", 0);
-
- throttle_cfg->buckets[THROTTLE_BPS_TOTAL].burst_length =
- qemu_opt_get_number(opts, "throttling.bps-total-max-length", 1);
- throttle_cfg->buckets[THROTTLE_BPS_READ].burst_length =
- qemu_opt_get_number(opts, "throttling.bps-read-max-length", 1);
- throttle_cfg->buckets[THROTTLE_BPS_WRITE].burst_length =
- qemu_opt_get_number(opts, "throttling.bps-write-max-length", 1);
- throttle_cfg->buckets[THROTTLE_OPS_TOTAL].burst_length =
- qemu_opt_get_number(opts, "throttling.iops-total-max-length", 1);
- throttle_cfg->buckets[THROTTLE_OPS_READ].burst_length =
- qemu_opt_get_number(opts, "throttling.iops-read-max-length", 1);
- throttle_cfg->buckets[THROTTLE_OPS_WRITE].burst_length =
- qemu_opt_get_number(opts, "throttling.iops-write-max-length", 1);
-
- throttle_cfg->op_size =
- qemu_opt_get_number(opts, "throttling.iops-size", 0);
-
+ parse_io_throttle_options(throttle_cfg, opts);
if (!throttle_is_valid(throttle_cfg, errp)) {
return;
}
diff --git a/fsdev/qemu-fsdev-throttle.c b/fsdev/qemu-fsdev-throttle.c
index cd653af..3cbf887 100644
--- a/fsdev/qemu-fsdev-throttle.c
+++ b/fsdev/qemu-fsdev-throttle.c
@@ -78,48 +78,7 @@ void fsdev_get_io_throttle(FsThrottle *fst, IOThrottle **fs9pcfg,
void fsdev_throttle_parse_opts(QemuOpts *opts, FsThrottle *fst, Error **errp)
{
- throttle_config_init(&fst->cfg);
- fst->cfg.buckets[THROTTLE_BPS_TOTAL].avg =
- qemu_opt_get_number(opts, "throttling.bps-total", 0);
- fst->cfg.buckets[THROTTLE_BPS_READ].avg =
- qemu_opt_get_number(opts, "throttling.bps-read", 0);
- fst->cfg.buckets[THROTTLE_BPS_WRITE].avg =
- qemu_opt_get_number(opts, "throttling.bps-write", 0);
- fst->cfg.buckets[THROTTLE_OPS_TOTAL].avg =
- qemu_opt_get_number(opts, "throttling.iops-total", 0);
- fst->cfg.buckets[THROTTLE_OPS_READ].avg =
- qemu_opt_get_number(opts, "throttling.iops-read", 0);
- fst->cfg.buckets[THROTTLE_OPS_WRITE].avg =
- qemu_opt_get_number(opts, "throttling.iops-write", 0);
-
- fst->cfg.buckets[THROTTLE_BPS_TOTAL].max =
- qemu_opt_get_number(opts, "throttling.bps-total-max", 0);
- fst->cfg.buckets[THROTTLE_BPS_READ].max =
- qemu_opt_get_number(opts, "throttling.bps-read-max", 0);
- fst->cfg.buckets[THROTTLE_BPS_WRITE].max =
- qemu_opt_get_number(opts, "throttling.bps-write-max", 0);
- fst->cfg.buckets[THROTTLE_OPS_TOTAL].max =
- qemu_opt_get_number(opts, "throttling.iops-total-max", 0);
- fst->cfg.buckets[THROTTLE_OPS_READ].max =
- qemu_opt_get_number(opts, "throttling.iops-read-max", 0);
- fst->cfg.buckets[THROTTLE_OPS_WRITE].max =
- qemu_opt_get_number(opts, "throttling.iops-write-max", 0);
-
- fst->cfg.buckets[THROTTLE_BPS_TOTAL].burst_length =
- qemu_opt_get_number(opts, "throttling.bps-total-max-length", 1);
- fst->cfg.buckets[THROTTLE_BPS_READ].burst_length =
- qemu_opt_get_number(opts, "throttling.bps-read-max-length", 1);
- fst->cfg.buckets[THROTTLE_BPS_WRITE].burst_length =
- qemu_opt_get_number(opts, "throttling.bps-write-max-length", 1);
- fst->cfg.buckets[THROTTLE_OPS_TOTAL].burst_length =
- qemu_opt_get_number(opts, "throttling.iops-total-max-length", 1);
- fst->cfg.buckets[THROTTLE_OPS_READ].burst_length =
- qemu_opt_get_number(opts, "throttling.iops-read-max-length", 1);
- fst->cfg.buckets[THROTTLE_OPS_WRITE].burst_length =
- qemu_opt_get_number(opts, "throttling.iops-write-max-length", 1);
- fst->cfg.op_size =
- qemu_opt_get_number(opts, "throttling.iops-size", 0);
-
+ parse_io_throttle_options(&fst->cfg, opts);
throttle_is_valid(&fst->cfg, errp);
}
diff --git a/include/qemu/throttle-options.h b/include/qemu/throttle-options.h
index ca0fd7d..bcfd185 100644
--- a/include/qemu/throttle-options.h
+++ b/include/qemu/throttle-options.h
@@ -94,4 +94,6 @@
void qmp_set_io_throttle(ThrottleConfig *, IOThrottle *);
+void parse_io_throttle_options(ThrottleConfig *, QemuOpts *);
+
#endif
diff --git a/util/throttle-options.c b/util/throttle-options.c
index 47cffed..e92c8c8 100644
--- a/util/throttle-options.c
+++ b/util/throttle-options.c
@@ -56,3 +56,50 @@ void qmp_set_io_throttle(ThrottleConfig *cfg, IOThrottle *arg)
cfg->op_size = arg->iops_size;
}
}
+
+void parse_io_throttle_options(ThrottleConfig *throttle_cfg, QemuOpts *opts)
+{
+ throttle_config_init(throttle_cfg);
+ throttle_cfg->buckets[THROTTLE_BPS_TOTAL].avg =
+ qemu_opt_get_number(opts, "throttling.bps-total", 0);
+ throttle_cfg->buckets[THROTTLE_BPS_READ].avg =
+ qemu_opt_get_number(opts, "throttling.bps-read", 0);
+ throttle_cfg->buckets[THROTTLE_BPS_WRITE].avg =
+ qemu_opt_get_number(opts, "throttling.bps-write", 0);
+ throttle_cfg->buckets[THROTTLE_OPS_TOTAL].avg =
+ qemu_opt_get_number(opts, "throttling.iops-total", 0);
+ throttle_cfg->buckets[THROTTLE_OPS_READ].avg =
+ qemu_opt_get_number(opts, "throttling.iops-read", 0);
+ throttle_cfg->buckets[THROTTLE_OPS_WRITE].avg =
+ qemu_opt_get_number(opts, "throttling.iops-write", 0);
+
+ throttle_cfg->buckets[THROTTLE_BPS_TOTAL].max =
+ qemu_opt_get_number(opts, "throttling.bps-total-max", 0);
+ throttle_cfg->buckets[THROTTLE_BPS_READ].max =
+ qemu_opt_get_number(opts, "throttling.bps-read-max", 0);
+ throttle_cfg->buckets[THROTTLE_BPS_WRITE].max =
+ qemu_opt_get_number(opts, "throttling.bps-write-max", 0);
+ throttle_cfg->buckets[THROTTLE_OPS_TOTAL].max =
+ qemu_opt_get_number(opts, "throttling.iops-total-max", 0);
+ throttle_cfg->buckets[THROTTLE_OPS_READ].max =
+ qemu_opt_get_number(opts, "throttling.iops-read-max", 0);
+ throttle_cfg->buckets[THROTTLE_OPS_WRITE].max =
+ qemu_opt_get_number(opts, "throttling.iops-write-max", 0);
+
+ throttle_cfg->buckets[THROTTLE_BPS_TOTAL].burst_length =
+ qemu_opt_get_number(opts, "throttling.bps-total-max-length", 1);
+ throttle_cfg->buckets[THROTTLE_BPS_READ].burst_length =
+ qemu_opt_get_number(opts, "throttling.bps-read-max-length", 1);
+ throttle_cfg->buckets[THROTTLE_BPS_WRITE].burst_length =
+ qemu_opt_get_number(opts, "throttling.bps-write-max-length", 1);
+ throttle_cfg->buckets[THROTTLE_OPS_TOTAL].burst_length =
+ qemu_opt_get_number(opts, "throttling.iops-total-max-length", 1);
+ throttle_cfg->buckets[THROTTLE_OPS_READ].burst_length =
+ qemu_opt_get_number(opts, "throttling.iops-read-max-length", 1);
+ throttle_cfg->buckets[THROTTLE_OPS_WRITE].burst_length =
+ qemu_opt_get_number(opts, "throttling.iops-write-max-length", 1);
+
+ throttle_cfg->op_size =
+ qemu_opt_get_number(opts, "throttling.iops-size", 0);
+
+}
--
1.8.3.1
next prev parent reply other threads:[~2017-05-02 14:30 UTC|newest]
Thread overview: 19+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-05-02 14:29 [Qemu-devel] [PATCH v3 0/4] fsdev: qmp interface for io throttling Pradeep Jagadeesh
2017-05-02 14:29 ` [Qemu-devel] [PATCH v3 1/4] Throttle: Create IOThrottle structure Pradeep Jagadeesh
2017-05-02 21:56 ` Eric Blake
2017-05-03 6:22 ` Greg Kurz
2017-05-03 14:19 ` Pradeep Jagadeesh
2017-05-03 17:10 ` Greg Kurz
2017-05-02 14:29 ` [Qemu-devel] [PATCH v3 2/4] fsdev: QMP interface for throttling Pradeep Jagadeesh
2017-05-02 22:13 ` Eric Blake
2017-05-03 15:40 ` Pradeep Jagadeesh
2017-05-03 16:32 ` Eric Blake
2017-05-04 15:12 ` Pradeep Jagadeesh
2017-05-04 15:19 ` Eric Blake
2017-05-05 11:09 ` Pradeep Jagadeesh
2017-05-02 14:29 ` [Qemu-devel] [PATCH v3 3/4] qmp: refactor duplicate code Pradeep Jagadeesh
2017-05-02 22:15 ` Eric Blake
2017-05-03 17:21 ` Greg Kurz
2017-05-04 9:44 ` Pradeep Jagadeesh
2017-05-02 14:29 ` Pradeep Jagadeesh [this message]
2017-05-02 15:03 ` [Qemu-devel] [PATCH v3 0/4] fsdev: qmp interface for io throttling no-reply
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1493735386-39622-5-git-send-email-pradeep.jagadeesh@huawei.com \
--to=pradeepkiruvale@gmail.com \
--cc=berto@igalia.com \
--cc=eblake@redhat.com \
--cc=groug@kaod.org \
--cc=jani.kokkonen@huawei.com \
--cc=pradeep.jagadeesh@huawei.com \
--cc=qemu-devel@nongnu.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).