qemu-devel.nongnu.org archive mirror
 help / color / mirror / Atom feed
From: Kevin Wolf <kwolf@redhat.com>
To: qemu-block@nongnu.org
Cc: kwolf@redhat.com, stefanha@redhat.com, qemu-devel@nongnu.org
Subject: [Qemu-devel] [PULL 39/58] qemu-io: Switch 'map' output to byte-based reporting
Date: Thu, 11 May 2017 16:32:42 +0200	[thread overview]
Message-ID: <1494513181-7900-40-git-send-email-kwolf@redhat.com> (raw)
In-Reply-To: <1494513181-7900-1-git-send-email-kwolf@redhat.com>

From: Eric Blake <eblake@redhat.com>

Mixing byte offset and sector allocation counts is a bit
confusing.  Also, reporting n/m sectors, where m decreases
according to the remaining size of the file, isn't really
adding any useful information; and reporting an offset at
both the front and end of the line, with large amounts of
whitespace, is pointless.  Update the output to use byte
counts and shorter lines, then adjust the affected tests
(./check -qcow2 102, ./check -vpc 146).

Note that 'qemu-io map' is MUCH weaker than 'qemu-img map';
the former only shows which regions of the active layer are
allocated, without regards to where the allocation comes from
or whether the allocated portion is known to read as zero
(because it is using the weaker bdrv_is_allocated()); while the
latter (especially in --output=json mode) reports more details
from bdrv_get_block_status().

Signed-off-by: Eric Blake <eblake@redhat.com>
Message-id: 20170429191419.30051-4-eblake@redhat.com
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
---
 qemu-io-cmds.c             | 11 ++++++-----
 tests/qemu-iotests/102.out |  4 ++--
 tests/qemu-iotests/146.out | 30 +++++++++++++++---------------
 3 files changed, 23 insertions(+), 22 deletions(-)

diff --git a/qemu-io-cmds.c b/qemu-io-cmds.c
index 1e0ebb4..4b2278f 100644
--- a/qemu-io-cmds.c
+++ b/qemu-io-cmds.c
@@ -1868,7 +1868,7 @@ static int map_f(BlockBackend *blk, int argc, char **argv)
 {
     int64_t offset;
     int64_t nb_sectors, total_sectors;
-    char s1[64];
+    char s1[64], s2[64];
     int64_t num;
     int ret;
     const char *retstr;
@@ -1894,10 +1894,11 @@ static int map_f(BlockBackend *blk, int argc, char **argv)
         }
 
         retstr = ret ? "    allocated" : "not allocated";
-        cvtstr(offset << 9ULL, s1, sizeof(s1));
-        printf("[% 24" PRId64 "] % 8" PRId64 "/% 8" PRId64 " sectors %s "
-               "at offset %s (%d)\n",
-               offset << 9ULL, num, nb_sectors, retstr, s1, ret);
+        cvtstr(num << BDRV_SECTOR_BITS, s1, sizeof(s1));
+        cvtstr(offset << BDRV_SECTOR_BITS, s2, sizeof(s2));
+        printf("%s (0x%" PRIx64 ") bytes %s at offset %s (0x%" PRIx64 ")\n",
+               s1, num << BDRV_SECTOR_BITS, retstr,
+               s2, offset << BDRV_SECTOR_BITS);
 
         offset += num;
         nb_sectors -= num;
diff --git a/tests/qemu-iotests/102.out b/tests/qemu-iotests/102.out
index eecde16..ccf172a 100644
--- a/tests/qemu-iotests/102.out
+++ b/tests/qemu-iotests/102.out
@@ -6,7 +6,7 @@ Formatting 'TEST_DIR/t.IMGFMT', fmt=IMGFMT size=65536
 wrote 65536/65536 bytes at offset 0
 64 KiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
 Image resized.
-[                       0]      128/     128 sectors     allocated at offset 0 bytes (1)
+64 KiB (0x10000) bytes     allocated at offset 0 bytes (0x0)
 Offset          Length          Mapped to       File
 
 === Testing map on an image file truncated outside of qemu ===
@@ -17,5 +17,5 @@ wrote 65536/65536 bytes at offset 0
 Image resized.
 QEMU X.Y.Z monitor - type 'help' for more information
 (qemu) qemu-io drv0 map
-[                       0]      128/     128 sectors     allocated at offset 0 bytes (1)
+64 KiB (0x10000) bytes     allocated at offset 0 bytes (0x0)
 *** done
diff --git a/tests/qemu-iotests/146.out b/tests/qemu-iotests/146.out
index 4f334d8..db6b296 100644
--- a/tests/qemu-iotests/146.out
+++ b/tests/qemu-iotests/146.out
@@ -2,39 +2,39 @@ QA output created by 146
 
 === Testing VPC Autodetect ===
 
-[                       0]  266334240/ 266334240 sectors not allocated at offset 0 bytes (0)
+126.998 GiB (0x1fbfe04000) bytes not allocated at offset 0 bytes (0x0)
 
 === Testing VPC with current_size force ===
 
-[                       0]  266338304/ 266338304 sectors not allocated at offset 0 bytes (0)
+127 GiB (0x1fc0000000) bytes not allocated at offset 0 bytes (0x0)
 
 === Testing VPC with chs force ===
 
-[                       0]  266334240/ 266334240 sectors not allocated at offset 0 bytes (0)
+126.998 GiB (0x1fbfe04000) bytes not allocated at offset 0 bytes (0x0)
 
 === Testing Hyper-V Autodetect ===
 
-[                       0]  266338304/ 266338304 sectors not allocated at offset 0 bytes (0)
+127 GiB (0x1fc0000000) bytes not allocated at offset 0 bytes (0x0)
 
 === Testing Hyper-V with current_size force ===
 
-[                       0]  266338304/ 266338304 sectors not allocated at offset 0 bytes (0)
+127 GiB (0x1fc0000000) bytes not allocated at offset 0 bytes (0x0)
 
 === Testing Hyper-V with chs force ===
 
-[                       0]  266334240/ 266334240 sectors not allocated at offset 0 bytes (0)
+126.998 GiB (0x1fbfe04000) bytes not allocated at offset 0 bytes (0x0)
 
 === Testing d2v Autodetect ===
 
-[                       0]   514560/  514560 sectors     allocated at offset 0 bytes (1)
+251.250 MiB (0xfb40000) bytes     allocated at offset 0 bytes (0x0)
 
 === Testing d2v with current_size force ===
 
-[                       0]   514560/  514560 sectors     allocated at offset 0 bytes (1)
+251.250 MiB (0xfb40000) bytes     allocated at offset 0 bytes (0x0)
 
 === Testing d2v with chs force ===
 
-[                       0]   514560/  514560 sectors     allocated at offset 0 bytes (1)
+251.250 MiB (0xfb40000) bytes     allocated at offset 0 bytes (0x0)
 
 === Testing Image create, default ===
 
@@ -42,15 +42,15 @@ Formatting 'TEST_DIR/IMGFMT-create-test.IMGFMT', fmt=IMGFMT size=4294967296
 
 === Read created image, default opts ====
 
-[                       0]  8389584/ 8389584 sectors not allocated at offset 0 bytes (0)
+4 GiB (0x10007a000) bytes not allocated at offset 0 bytes (0x0)
 
 === Read created image, force_size_calc=chs ====
 
-[                       0]  8389584/ 8389584 sectors not allocated at offset 0 bytes (0)
+4 GiB (0x10007a000) bytes not allocated at offset 0 bytes (0x0)
 
 === Read created image, force_size_calc=current_size ====
 
-[                       0]  8389584/ 8389584 sectors not allocated at offset 0 bytes (0)
+4 GiB (0x10007a000) bytes not allocated at offset 0 bytes (0x0)
 
 === Testing Image create, force_size ===
 
@@ -58,13 +58,13 @@ Formatting 'TEST_DIR/IMGFMT-create-test.IMGFMT', fmt=IMGFMT size=4294967296 forc
 
 === Read created image, default opts ====
 
-[                       0]  8388608/ 8388608 sectors not allocated at offset 0 bytes (0)
+4 GiB (0x100000000) bytes not allocated at offset 0 bytes (0x0)
 
 === Read created image, force_size_calc=chs ====
 
-[                       0]  8388608/ 8388608 sectors not allocated at offset 0 bytes (0)
+4 GiB (0x100000000) bytes not allocated at offset 0 bytes (0x0)
 
 === Read created image, force_size_calc=current_size ====
 
-[                       0]  8388608/ 8388608 sectors not allocated at offset 0 bytes (0)
+4 GiB (0x100000000) bytes not allocated at offset 0 bytes (0x0)
 *** done
-- 
1.8.3.1

  parent reply	other threads:[~2017-05-11 14:34 UTC|newest]

Thread overview: 62+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2017-05-11 14:32 [Qemu-devel] [PULL 00/58] Block layer patches Kevin Wolf
2017-05-11 14:32 ` [Qemu-devel] [PULL 01/58] block: Make bdrv_perm_names public Kevin Wolf
2017-05-11 14:32 ` [Qemu-devel] [PULL 02/58] block: Add, parse and store "force-share" option Kevin Wolf
2017-05-11 14:32 ` [Qemu-devel] [PULL 03/58] block: Respect "force-share" in perm propagating Kevin Wolf
2017-05-11 14:32 ` [Qemu-devel] [PULL 04/58] qemu-img: Add --force-share option to subcommands Kevin Wolf
2017-05-11 14:32 ` [Qemu-devel] [PULL 05/58] qemu-img: Update documentation for -U Kevin Wolf
2017-05-12 17:37   ` [Qemu-devel] [Qemu-block] " Max Reitz
2017-05-15  9:12     ` Fam Zheng
2017-05-11 14:32 ` [Qemu-devel] [PULL 06/58] qemu-io: Add --force-share option Kevin Wolf
2017-05-11 14:32 ` [Qemu-devel] [PULL 07/58] iotests: 030: Prepare for image locking Kevin Wolf
2017-05-11 14:32 ` [Qemu-devel] [PULL 08/58] iotests: 046: " Kevin Wolf
2017-05-11 14:32 ` [Qemu-devel] [PULL 09/58] iotests: 055: Don't attach the target image already for drive-backup Kevin Wolf
2017-05-11 14:32 ` [Qemu-devel] [PULL 10/58] iotests: 085: Avoid image locking conflict Kevin Wolf
2017-05-11 14:32 ` [Qemu-devel] [PULL 11/58] iotests: 087: Don't attach test image twice Kevin Wolf
2017-05-11 14:32 ` [Qemu-devel] [PULL 12/58] iotests: 091: Quit QEMU before checking image Kevin Wolf
2017-05-11 14:32 ` [Qemu-devel] [PULL 13/58] iotests: 172: Use separate images for multiple devices Kevin Wolf
2017-05-11 14:32 ` [Qemu-devel] [PULL 14/58] tests: Use null-co:// instead of /dev/null as the dummy image Kevin Wolf
2017-05-11 14:32 ` [Qemu-devel] [PULL 15/58] file-posix: Add 'locking' option Kevin Wolf
2017-05-11 14:32 ` [Qemu-devel] [PULL 16/58] file-win32: Error out if locking=on Kevin Wolf
2017-05-11 14:32 ` [Qemu-devel] [PULL 17/58] tests: Disable image lock in test-replication Kevin Wolf
2017-05-11 14:32 ` [Qemu-devel] [PULL 18/58] block: Reuse bs as backing hd for drive-backup sync=none Kevin Wolf
2017-05-11 14:32 ` [Qemu-devel] [PULL 19/58] osdep: Add qemu_lock_fd and qemu_unlock_fd Kevin Wolf
2017-05-11 14:32 ` [Qemu-devel] [PULL 20/58] osdep: Fall back to posix lock when OFD lock is unavailable Kevin Wolf
2017-05-11 14:32 ` [Qemu-devel] [PULL 21/58] file-posix: Add image locking to perm operations Kevin Wolf
2017-05-11 14:32 ` [Qemu-devel] [PULL 22/58] qemu-iotests: Add test case 153 for image locking Kevin Wolf
2017-05-11 14:32 ` [Qemu-devel] [PULL 23/58] tests: Add POSIX image locking test case 182 Kevin Wolf
2017-05-11 14:32 ` [Qemu-devel] [PULL 24/58] qcow2: Fix preallocation size formula Kevin Wolf
2017-05-11 14:32 ` [Qemu-devel] [PULL 25/58] qcow2: Reuse preallocated zero clusters Kevin Wolf
2017-05-11 14:32 ` [Qemu-devel] [PULL 26/58] qcow2: Discard " Kevin Wolf
2017-05-11 14:32 ` [Qemu-devel] [PULL 27/58] iotests: Extend test 066 Kevin Wolf
2017-05-11 14:32 ` [Qemu-devel] [PULL 28/58] migration: Unify block node activation error handling Kevin Wolf
2017-05-11 14:32 ` [Qemu-devel] [PULL 29/58] block: New BdrvChildRole.activate() for blk_resume_after_migration() Kevin Wolf
2017-05-11 14:32 ` [Qemu-devel] [PULL 30/58] block: Drop permissions when migration completes Kevin Wolf
2017-05-11 14:32 ` [Qemu-devel] [PULL 31/58] block: Inactivate parents before children Kevin Wolf
2017-05-11 14:32 ` [Qemu-devel] [PULL 32/58] block: Fix write/resize permissions for inactive images Kevin Wolf
2017-05-11 14:32 ` [Qemu-devel] [PULL 33/58] file-posix: Remove .bdrv_inactivate/invalidate_cache Kevin Wolf
2017-05-11 14:32 ` [Qemu-devel] [PULL 34/58] qemu-img: wait for convert coroutines to complete Kevin Wolf
2017-05-11 14:32 ` [Qemu-devel] [PULL 35/58] nvme: Implement Write Zeroes Kevin Wolf
2017-05-11 14:32 ` [Qemu-devel] [PULL 36/58] blockdev: use drained_begin/end for qmp_block_resize Kevin Wolf
2017-05-11 14:32 ` [Qemu-devel] [PULL 37/58] qemu-io: Improve alignment checks Kevin Wolf
2017-05-11 14:32 ` [Qemu-devel] [PULL 38/58] qemu-io: Switch 'alloc' command to byte-based length Kevin Wolf
2017-05-11 14:32 ` Kevin Wolf [this message]
2017-05-11 14:32 ` [Qemu-devel] [PULL 40/58] blkdebug: Sanity check block layer guarantees Kevin Wolf
2017-05-11 14:32 ` [Qemu-devel] [PULL 41/58] blkdebug: Refactor error injection Kevin Wolf
2017-05-11 14:32 ` [Qemu-devel] [PULL 42/58] blkdebug: Add pass-through write_zero and discard support Kevin Wolf
2017-05-11 14:32 ` [Qemu-devel] [PULL 43/58] blkdebug: Simplify override logic Kevin Wolf
2017-05-11 14:32 ` [Qemu-devel] [PULL 44/58] blkdebug: Add ability to override unmap geometries Kevin Wolf
2017-05-11 14:32 ` [Qemu-devel] [PULL 45/58] tests: Add coverage for recent block geometry fixes Kevin Wolf
2017-05-11 14:32 ` [Qemu-devel] [PULL 46/58] qcow2: Nicer variable names in qcow2_update_snapshot_refcount() Kevin Wolf
2017-05-11 14:32 ` [Qemu-devel] [PULL 47/58] qcow2: Use consistent switch indentation Kevin Wolf
2017-05-11 14:32 ` [Qemu-devel] [PULL 48/58] block: Update comments on BDRV_BLOCK_* meanings Kevin Wolf
2017-05-11 14:32 ` [Qemu-devel] [PULL 49/58] qcow2: Correctly report status of preallocated zero clusters Kevin Wolf
2017-05-11 14:32 ` [Qemu-devel] [PULL 50/58] qcow2: Name typedef for cluster type Kevin Wolf
2017-05-11 14:32 ` [Qemu-devel] [PULL 51/58] qcow2: Make distinction between zero cluster types obvious Kevin Wolf
2017-05-11 14:32 ` [Qemu-devel] [PULL 52/58] qcow2: Optimize zero_single_l2() to minimize L2 churn Kevin Wolf
2017-05-11 14:32 ` [Qemu-devel] [PULL 53/58] iotests: Improve _filter_qemu_img_map Kevin Wolf
2017-05-11 14:32 ` [Qemu-devel] [PULL 54/58] iotests: Add test 179 to cover write zeroes with unmap Kevin Wolf
2017-05-11 14:32 ` [Qemu-devel] [PULL 55/58] qcow2: Optimize write zero of unaligned tail cluster Kevin Wolf
2017-05-11 14:32 ` [Qemu-devel] [PULL 56/58] qcow2: Assert that cluster operations are aligned Kevin Wolf
2017-05-11 14:33 ` [Qemu-devel] [PULL 57/58] qcow2: Discard/zero clusters by byte count Kevin Wolf
2017-05-11 14:33 ` [Qemu-devel] [PULL 58/58] MAINTAINERS: Add qemu-progress to the block layer Kevin Wolf
2017-05-12 13:39 ` [Qemu-devel] [PULL 00/58] Block layer patches Stefan Hajnoczi

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1494513181-7900-40-git-send-email-kwolf@redhat.com \
    --to=kwolf@redhat.com \
    --cc=qemu-block@nongnu.org \
    --cc=qemu-devel@nongnu.org \
    --cc=stefanha@redhat.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).