From: Kevin Wolf <kwolf@redhat.com>
To: qemu-block@nongnu.org
Cc: kwolf@redhat.com, stefanha@redhat.com, qemu-devel@nongnu.org
Subject: [Qemu-devel] [PULL 54/58] iotests: Add test 179 to cover write zeroes with unmap
Date: Thu, 11 May 2017 16:32:57 +0200 [thread overview]
Message-ID: <1494513181-7900-55-git-send-email-kwolf@redhat.com> (raw)
In-Reply-To: <1494513181-7900-1-git-send-email-kwolf@redhat.com>
From: Eric Blake <eblake@redhat.com>
No tests were covering write zeroes with unmap. Additionally,
I needed to prove that my previous patches for correct status
reporting and write zeroes optimizations actually had an impact.
The test works for cluster_size between 8k and 2M (for smaller
sizes, it fails because our allocation patterns are not contiguous
with small clusters - in part, the largest consecutive allocation
we tend to get is often bounded by the size covered by one L2
table).
Note that testing for zero clusters is tricky: 'qemu-io map'
reports whether data comes from the current layer of the image
(useful for sniffing out which regions of the file have
QCOW_OFLAG_ZERO) - but doesn't show which clusters have mappings;
while 'qemu-img map' sees "zero":true for both unallocated and
zero clusters for any qcow2 with no backing layer (so less useful
at detecting true zero clusters), but reliably shows mappings.
So we have to rely on both queries side-by-side at each point of
the test.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-id: 20170507000552.20847-10-eblake@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
---
tests/qemu-iotests/179 | 130 +++++++++++++++++++++++++++++++++++++
tests/qemu-iotests/179.out | 156 +++++++++++++++++++++++++++++++++++++++++++++
tests/qemu-iotests/group | 1 +
3 files changed, 287 insertions(+)
create mode 100755 tests/qemu-iotests/179
create mode 100644 tests/qemu-iotests/179.out
diff --git a/tests/qemu-iotests/179 b/tests/qemu-iotests/179
new file mode 100755
index 0000000..7bc8db8
--- /dev/null
+++ b/tests/qemu-iotests/179
@@ -0,0 +1,130 @@
+#!/bin/bash
+#
+# Test case for write zeroes with unmap
+#
+# Copyright (C) 2017 Red Hat, Inc.
+#
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program. If not, see <http://www.gnu.org/licenses/>.
+#
+
+# creator
+owner=eblake@redhat.com
+
+seq="$(basename $0)"
+echo "QA output created by $seq"
+
+here="$PWD"
+status=1 # failure is the default!
+
+_cleanup()
+{
+ _cleanup_test_img
+}
+trap "_cleanup; exit \$status" 0 1 2 3 15
+
+# get standard environment, filters and checks
+. ./common.rc
+. ./common.filter
+
+_supported_fmt qcow2
+_supported_proto file
+_supported_os Linux
+
+# v2 images can't mark clusters as zero
+_unsupported_imgopts compat=0.10
+
+echo
+echo '=== Testing write zeroes with unmap ==='
+echo
+
+TEST_IMG="$TEST_IMG.base" _make_test_img 64M
+_make_test_img -b "$TEST_IMG.base"
+
+# Offsets chosen at or near 2M boundaries so test works at all cluster sizes
+# 8k and larger (smaller clusters fail due to non-contiguous allocations)
+
+# Aligned writes to unallocated cluster should not allocate mapping, but must
+# mark cluster as zero, whether or not unmap was requested
+$QEMU_IO -c "write -z -u 2M 2M" "$TEST_IMG.base" | _filter_qemu_io
+$QEMU_IO -c "write -z 6M 2M" "$TEST_IMG.base" | _filter_qemu_io
+$QEMU_IO -c "map" "$TEST_IMG.base" | _filter_qemu_io
+$QEMU_IMG map --output=json "$TEST_IMG.base" | _filter_qemu_img_map
+
+# Unaligned writes need not allocate mapping if the cluster already reads
+# as zero, but must mark cluster as zero, whether or not unmap was requested
+$QEMU_IO -c "write -z -u 10485761 2097150" "$TEST_IMG.base" | _filter_qemu_io
+$QEMU_IO -c "write -z 14680065 2097150" "$TEST_IMG.base" | _filter_qemu_io
+$QEMU_IO -c "map" "$TEST_IMG.base" | _filter_qemu_io
+$QEMU_IMG map --output=json "$TEST_IMG.base" | _filter_qemu_img_map
+
+# Requesting unmap of normal data must deallocate; omitting unmap should
+# preserve the mapping
+$QEMU_IO -c "write 18M 14M" "$TEST_IMG.base" | _filter_qemu_io
+$QEMU_IO -c "write -z -u 20M 2M" "$TEST_IMG.base" | _filter_qemu_io
+$QEMU_IO -c "write -z 24M 6M" "$TEST_IMG.base" | _filter_qemu_io
+$QEMU_IO -c "map" "$TEST_IMG.base" | _filter_qemu_io
+$QEMU_IMG map --output=json "$TEST_IMG.base" | _filter_qemu_img_map
+
+# Likewise when writing on already-mapped zero data
+$QEMU_IO -c "write -z -u 26M 2M" "$TEST_IMG.base" | _filter_qemu_io
+$QEMU_IO -c "write -z 28M 2M" "$TEST_IMG.base" | _filter_qemu_io
+$QEMU_IO -c "map" "$TEST_IMG.base" | _filter_qemu_io
+$QEMU_IMG map --output=json "$TEST_IMG.base" | _filter_qemu_img_map
+
+# Writing on unmapped zeroes does not allocate
+$QEMU_IO -c "write -z 32M 8M" "$TEST_IMG.base" | _filter_qemu_io
+$QEMU_IO -c "write -z -u 34M 2M" "$TEST_IMG.base" | _filter_qemu_io
+$QEMU_IO -c "write -z 36M 2M" "$TEST_IMG.base" | _filter_qemu_io
+$QEMU_IO -c "map" "$TEST_IMG.base" | _filter_qemu_io
+$QEMU_IMG map --output=json "$TEST_IMG.base" | _filter_qemu_img_map
+
+# Writing zero overrides a backing file, regardless of backing cluster type
+$QEMU_IO -c "write -z 40M 8M" "$TEST_IMG.base" | _filter_qemu_io
+$QEMU_IO -c "write 48M 8M" "$TEST_IMG.base" | _filter_qemu_io
+$QEMU_IO -c "write -z -u 42M 2M" "$TEST_IMG" | _filter_qemu_io
+$QEMU_IO -c "write -z 44M 2M" "$TEST_IMG" | _filter_qemu_io
+$QEMU_IO -c "write -z -u 50M 2M" "$TEST_IMG" | _filter_qemu_io
+$QEMU_IO -c "write -z 52M 2M" "$TEST_IMG" | _filter_qemu_io
+$QEMU_IO -c "write -z -u 58M 2M" "$TEST_IMG" | _filter_qemu_io
+$QEMU_IO -c "write -z 60M 2M" "$TEST_IMG" | _filter_qemu_io
+$QEMU_IO -c "map" "$TEST_IMG" | _filter_qemu_io
+$QEMU_IMG map --output=json "$TEST_IMG" | _filter_qemu_img_map
+
+# Final check that mappings are correct and images are still sane
+TEST_IMG="$TEST_IMG.base" _check_test_img
+_check_test_img
+
+echo
+echo '=== Testing cache optimization ==='
+echo
+
+BLKDBG_TEST_IMG="blkdebug:$TEST_DIR/blkdebug.conf:$TEST_IMG.base"
+
+cat > "$TEST_DIR/blkdebug.conf" <<EOF
+[inject-error]
+event = "l2_update"
+errno = "5"
+immediately = "on"
+once = "off"
+EOF
+
+# None of the following writes should trigger an L2 update, because the
+# cluster already reads as zero, and we don't have to change allocation
+$QEMU_IO -c "w -z -u 20M 2M" "$BLKDBG_TEST_IMG" | _filter_qemu_io
+$QEMU_IO -c "w -z 20M 2M" "$BLKDBG_TEST_IMG" | _filter_qemu_io
+$QEMU_IO -c "w -z 28M 2M" "$BLKDBG_TEST_IMG" | _filter_qemu_io
+
+# success, all done
+echo '*** done'
+status=0
diff --git a/tests/qemu-iotests/179.out b/tests/qemu-iotests/179.out
new file mode 100644
index 0000000..80722b2
--- /dev/null
+++ b/tests/qemu-iotests/179.out
@@ -0,0 +1,156 @@
+QA output created by 179
+
+=== Testing write zeroes with unmap ===
+
+Formatting 'TEST_DIR/t.IMGFMT.base', fmt=IMGFMT size=67108864
+Formatting 'TEST_DIR/t.IMGFMT', fmt=IMGFMT size=67108864 backing_file=TEST_DIR/t.IMGFMT.base
+wrote 2097152/2097152 bytes at offset 2097152
+2 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
+wrote 2097152/2097152 bytes at offset 6291456
+2 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
+2 MiB (0x200000) bytes not allocated at offset 0 bytes (0x0)
+2 MiB (0x200000) bytes allocated at offset 2 MiB (0x200000)
+2 MiB (0x200000) bytes not allocated at offset 4 MiB (0x400000)
+2 MiB (0x200000) bytes allocated at offset 6 MiB (0x600000)
+56 MiB (0x3800000) bytes not allocated at offset 8 MiB (0x800000)
+[{ "start": 0, "length": 67108864, "depth": 0, "zero": true, "data": false}]
+wrote 2097150/2097150 bytes at offset 10485761
+2 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
+wrote 2097150/2097150 bytes at offset 14680065
+2 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
+2 MiB (0x200000) bytes not allocated at offset 0 bytes (0x0)
+2 MiB (0x200000) bytes allocated at offset 2 MiB (0x200000)
+2 MiB (0x200000) bytes not allocated at offset 4 MiB (0x400000)
+2 MiB (0x200000) bytes allocated at offset 6 MiB (0x600000)
+2 MiB (0x200000) bytes not allocated at offset 8 MiB (0x800000)
+2 MiB (0x200000) bytes allocated at offset 10 MiB (0xa00000)
+2 MiB (0x200000) bytes not allocated at offset 12 MiB (0xc00000)
+2 MiB (0x200000) bytes allocated at offset 14 MiB (0xe00000)
+48 MiB (0x3000000) bytes not allocated at offset 16 MiB (0x1000000)
+[{ "start": 0, "length": 67108864, "depth": 0, "zero": true, "data": false}]
+wrote 14680064/14680064 bytes at offset 18874368
+14 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
+wrote 2097152/2097152 bytes at offset 20971520
+2 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
+wrote 6291456/6291456 bytes at offset 25165824
+6 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
+2 MiB (0x200000) bytes not allocated at offset 0 bytes (0x0)
+2 MiB (0x200000) bytes allocated at offset 2 MiB (0x200000)
+2 MiB (0x200000) bytes not allocated at offset 4 MiB (0x400000)
+2 MiB (0x200000) bytes allocated at offset 6 MiB (0x600000)
+2 MiB (0x200000) bytes not allocated at offset 8 MiB (0x800000)
+2 MiB (0x200000) bytes allocated at offset 10 MiB (0xa00000)
+2 MiB (0x200000) bytes not allocated at offset 12 MiB (0xc00000)
+2 MiB (0x200000) bytes allocated at offset 14 MiB (0xe00000)
+2 MiB (0x200000) bytes not allocated at offset 16 MiB (0x1000000)
+14 MiB (0xe00000) bytes allocated at offset 18 MiB (0x1200000)
+32 MiB (0x2000000) bytes not allocated at offset 32 MiB (0x2000000)
+[{ "start": 0, "length": 18874368, "depth": 0, "zero": true, "data": false},
+{ "start": 18874368, "length": 2097152, "depth": 0, "zero": false, "data": true, "offset": OFFSET},
+{ "start": 20971520, "length": 2097152, "depth": 0, "zero": true, "data": false},
+{ "start": 23068672, "length": 2097152, "depth": 0, "zero": false, "data": true, "offset": OFFSET},
+{ "start": 25165824, "length": 6291456, "depth": 0, "zero": true, "data": false, "offset": OFFSET},
+{ "start": 31457280, "length": 2097152, "depth": 0, "zero": false, "data": true, "offset": OFFSET},
+{ "start": 33554432, "length": 33554432, "depth": 0, "zero": true, "data": false}]
+wrote 2097152/2097152 bytes at offset 27262976
+2 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
+wrote 2097152/2097152 bytes at offset 29360128
+2 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
+2 MiB (0x200000) bytes not allocated at offset 0 bytes (0x0)
+2 MiB (0x200000) bytes allocated at offset 2 MiB (0x200000)
+2 MiB (0x200000) bytes not allocated at offset 4 MiB (0x400000)
+2 MiB (0x200000) bytes allocated at offset 6 MiB (0x600000)
+2 MiB (0x200000) bytes not allocated at offset 8 MiB (0x800000)
+2 MiB (0x200000) bytes allocated at offset 10 MiB (0xa00000)
+2 MiB (0x200000) bytes not allocated at offset 12 MiB (0xc00000)
+2 MiB (0x200000) bytes allocated at offset 14 MiB (0xe00000)
+2 MiB (0x200000) bytes not allocated at offset 16 MiB (0x1000000)
+14 MiB (0xe00000) bytes allocated at offset 18 MiB (0x1200000)
+32 MiB (0x2000000) bytes not allocated at offset 32 MiB (0x2000000)
+[{ "start": 0, "length": 18874368, "depth": 0, "zero": true, "data": false},
+{ "start": 18874368, "length": 2097152, "depth": 0, "zero": false, "data": true, "offset": OFFSET},
+{ "start": 20971520, "length": 2097152, "depth": 0, "zero": true, "data": false},
+{ "start": 23068672, "length": 2097152, "depth": 0, "zero": false, "data": true, "offset": OFFSET},
+{ "start": 25165824, "length": 2097152, "depth": 0, "zero": true, "data": false, "offset": OFFSET},
+{ "start": 27262976, "length": 2097152, "depth": 0, "zero": true, "data": false},
+{ "start": 29360128, "length": 2097152, "depth": 0, "zero": true, "data": false, "offset": OFFSET},
+{ "start": 31457280, "length": 2097152, "depth": 0, "zero": false, "data": true, "offset": OFFSET},
+{ "start": 33554432, "length": 33554432, "depth": 0, "zero": true, "data": false}]
+wrote 8388608/8388608 bytes at offset 33554432
+8 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
+wrote 2097152/2097152 bytes at offset 35651584
+2 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
+wrote 2097152/2097152 bytes at offset 37748736
+2 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
+2 MiB (0x200000) bytes not allocated at offset 0 bytes (0x0)
+2 MiB (0x200000) bytes allocated at offset 2 MiB (0x200000)
+2 MiB (0x200000) bytes not allocated at offset 4 MiB (0x400000)
+2 MiB (0x200000) bytes allocated at offset 6 MiB (0x600000)
+2 MiB (0x200000) bytes not allocated at offset 8 MiB (0x800000)
+2 MiB (0x200000) bytes allocated at offset 10 MiB (0xa00000)
+2 MiB (0x200000) bytes not allocated at offset 12 MiB (0xc00000)
+2 MiB (0x200000) bytes allocated at offset 14 MiB (0xe00000)
+2 MiB (0x200000) bytes not allocated at offset 16 MiB (0x1000000)
+22 MiB (0x1600000) bytes allocated at offset 18 MiB (0x1200000)
+24 MiB (0x1800000) bytes not allocated at offset 40 MiB (0x2800000)
+[{ "start": 0, "length": 18874368, "depth": 0, "zero": true, "data": false},
+{ "start": 18874368, "length": 2097152, "depth": 0, "zero": false, "data": true, "offset": OFFSET},
+{ "start": 20971520, "length": 2097152, "depth": 0, "zero": true, "data": false},
+{ "start": 23068672, "length": 2097152, "depth": 0, "zero": false, "data": true, "offset": OFFSET},
+{ "start": 25165824, "length": 2097152, "depth": 0, "zero": true, "data": false, "offset": OFFSET},
+{ "start": 27262976, "length": 2097152, "depth": 0, "zero": true, "data": false},
+{ "start": 29360128, "length": 2097152, "depth": 0, "zero": true, "data": false, "offset": OFFSET},
+{ "start": 31457280, "length": 2097152, "depth": 0, "zero": false, "data": true, "offset": OFFSET},
+{ "start": 33554432, "length": 33554432, "depth": 0, "zero": true, "data": false}]
+wrote 8388608/8388608 bytes at offset 41943040
+8 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
+wrote 8388608/8388608 bytes at offset 50331648
+8 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
+wrote 2097152/2097152 bytes at offset 44040192
+2 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
+wrote 2097152/2097152 bytes at offset 46137344
+2 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
+wrote 2097152/2097152 bytes at offset 52428800
+2 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
+wrote 2097152/2097152 bytes at offset 54525952
+2 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
+wrote 2097152/2097152 bytes at offset 60817408
+2 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
+wrote 2097152/2097152 bytes at offset 62914560
+2 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
+42 MiB (0x2a00000) bytes not allocated at offset 0 bytes (0x0)
+4 MiB (0x400000) bytes allocated at offset 42 MiB (0x2a00000)
+4 MiB (0x400000) bytes not allocated at offset 46 MiB (0x2e00000)
+4 MiB (0x400000) bytes allocated at offset 50 MiB (0x3200000)
+4 MiB (0x400000) bytes not allocated at offset 54 MiB (0x3600000)
+4 MiB (0x400000) bytes allocated at offset 58 MiB (0x3a00000)
+2 MiB (0x200000) bytes not allocated at offset 62 MiB (0x3e00000)
+[{ "start": 0, "length": 18874368, "depth": 1, "zero": true, "data": false},
+{ "start": 18874368, "length": 2097152, "depth": 1, "zero": false, "data": true, "offset": OFFSET},
+{ "start": 20971520, "length": 2097152, "depth": 1, "zero": true, "data": false},
+{ "start": 23068672, "length": 2097152, "depth": 1, "zero": false, "data": true, "offset": OFFSET},
+{ "start": 25165824, "length": 2097152, "depth": 1, "zero": true, "data": false, "offset": OFFSET},
+{ "start": 27262976, "length": 2097152, "depth": 1, "zero": true, "data": false},
+{ "start": 29360128, "length": 2097152, "depth": 1, "zero": true, "data": false, "offset": OFFSET},
+{ "start": 31457280, "length": 2097152, "depth": 1, "zero": false, "data": true, "offset": OFFSET},
+{ "start": 33554432, "length": 10485760, "depth": 1, "zero": true, "data": false},
+{ "start": 44040192, "length": 4194304, "depth": 0, "zero": true, "data": false},
+{ "start": 48234496, "length": 2097152, "depth": 1, "zero": true, "data": false},
+{ "start": 50331648, "length": 2097152, "depth": 1, "zero": false, "data": true, "offset": OFFSET},
+{ "start": 52428800, "length": 4194304, "depth": 0, "zero": true, "data": false},
+{ "start": 56623104, "length": 2097152, "depth": 1, "zero": false, "data": true, "offset": OFFSET},
+{ "start": 58720256, "length": 2097152, "depth": 1, "zero": true, "data": false},
+{ "start": 60817408, "length": 4194304, "depth": 0, "zero": true, "data": false},
+{ "start": 65011712, "length": 2097152, "depth": 1, "zero": true, "data": false}]
+No errors were found on the image.
+No errors were found on the image.
+
+=== Testing cache optimization ===
+
+wrote 2097152/2097152 bytes at offset 20971520
+2 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
+wrote 2097152/2097152 bytes at offset 20971520
+2 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
+wrote 2097152/2097152 bytes at offset 29360128
+2 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
+*** done
diff --git a/tests/qemu-iotests/group b/tests/qemu-iotests/group
index bb6df8f..5c8ea0f 100644
--- a/tests/qemu-iotests/group
+++ b/tests/qemu-iotests/group
@@ -171,5 +171,6 @@
175 auto quick
176 rw auto backing
177 rw auto quick
+179 rw auto quick
181 rw auto migration
182 rw auto quick
--
1.8.3.1
next prev parent reply other threads:[~2017-05-11 14:35 UTC|newest]
Thread overview: 62+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-05-11 14:32 [Qemu-devel] [PULL 00/58] Block layer patches Kevin Wolf
2017-05-11 14:32 ` [Qemu-devel] [PULL 01/58] block: Make bdrv_perm_names public Kevin Wolf
2017-05-11 14:32 ` [Qemu-devel] [PULL 02/58] block: Add, parse and store "force-share" option Kevin Wolf
2017-05-11 14:32 ` [Qemu-devel] [PULL 03/58] block: Respect "force-share" in perm propagating Kevin Wolf
2017-05-11 14:32 ` [Qemu-devel] [PULL 04/58] qemu-img: Add --force-share option to subcommands Kevin Wolf
2017-05-11 14:32 ` [Qemu-devel] [PULL 05/58] qemu-img: Update documentation for -U Kevin Wolf
2017-05-12 17:37 ` [Qemu-devel] [Qemu-block] " Max Reitz
2017-05-15 9:12 ` Fam Zheng
2017-05-11 14:32 ` [Qemu-devel] [PULL 06/58] qemu-io: Add --force-share option Kevin Wolf
2017-05-11 14:32 ` [Qemu-devel] [PULL 07/58] iotests: 030: Prepare for image locking Kevin Wolf
2017-05-11 14:32 ` [Qemu-devel] [PULL 08/58] iotests: 046: " Kevin Wolf
2017-05-11 14:32 ` [Qemu-devel] [PULL 09/58] iotests: 055: Don't attach the target image already for drive-backup Kevin Wolf
2017-05-11 14:32 ` [Qemu-devel] [PULL 10/58] iotests: 085: Avoid image locking conflict Kevin Wolf
2017-05-11 14:32 ` [Qemu-devel] [PULL 11/58] iotests: 087: Don't attach test image twice Kevin Wolf
2017-05-11 14:32 ` [Qemu-devel] [PULL 12/58] iotests: 091: Quit QEMU before checking image Kevin Wolf
2017-05-11 14:32 ` [Qemu-devel] [PULL 13/58] iotests: 172: Use separate images for multiple devices Kevin Wolf
2017-05-11 14:32 ` [Qemu-devel] [PULL 14/58] tests: Use null-co:// instead of /dev/null as the dummy image Kevin Wolf
2017-05-11 14:32 ` [Qemu-devel] [PULL 15/58] file-posix: Add 'locking' option Kevin Wolf
2017-05-11 14:32 ` [Qemu-devel] [PULL 16/58] file-win32: Error out if locking=on Kevin Wolf
2017-05-11 14:32 ` [Qemu-devel] [PULL 17/58] tests: Disable image lock in test-replication Kevin Wolf
2017-05-11 14:32 ` [Qemu-devel] [PULL 18/58] block: Reuse bs as backing hd for drive-backup sync=none Kevin Wolf
2017-05-11 14:32 ` [Qemu-devel] [PULL 19/58] osdep: Add qemu_lock_fd and qemu_unlock_fd Kevin Wolf
2017-05-11 14:32 ` [Qemu-devel] [PULL 20/58] osdep: Fall back to posix lock when OFD lock is unavailable Kevin Wolf
2017-05-11 14:32 ` [Qemu-devel] [PULL 21/58] file-posix: Add image locking to perm operations Kevin Wolf
2017-05-11 14:32 ` [Qemu-devel] [PULL 22/58] qemu-iotests: Add test case 153 for image locking Kevin Wolf
2017-05-11 14:32 ` [Qemu-devel] [PULL 23/58] tests: Add POSIX image locking test case 182 Kevin Wolf
2017-05-11 14:32 ` [Qemu-devel] [PULL 24/58] qcow2: Fix preallocation size formula Kevin Wolf
2017-05-11 14:32 ` [Qemu-devel] [PULL 25/58] qcow2: Reuse preallocated zero clusters Kevin Wolf
2017-05-11 14:32 ` [Qemu-devel] [PULL 26/58] qcow2: Discard " Kevin Wolf
2017-05-11 14:32 ` [Qemu-devel] [PULL 27/58] iotests: Extend test 066 Kevin Wolf
2017-05-11 14:32 ` [Qemu-devel] [PULL 28/58] migration: Unify block node activation error handling Kevin Wolf
2017-05-11 14:32 ` [Qemu-devel] [PULL 29/58] block: New BdrvChildRole.activate() for blk_resume_after_migration() Kevin Wolf
2017-05-11 14:32 ` [Qemu-devel] [PULL 30/58] block: Drop permissions when migration completes Kevin Wolf
2017-05-11 14:32 ` [Qemu-devel] [PULL 31/58] block: Inactivate parents before children Kevin Wolf
2017-05-11 14:32 ` [Qemu-devel] [PULL 32/58] block: Fix write/resize permissions for inactive images Kevin Wolf
2017-05-11 14:32 ` [Qemu-devel] [PULL 33/58] file-posix: Remove .bdrv_inactivate/invalidate_cache Kevin Wolf
2017-05-11 14:32 ` [Qemu-devel] [PULL 34/58] qemu-img: wait for convert coroutines to complete Kevin Wolf
2017-05-11 14:32 ` [Qemu-devel] [PULL 35/58] nvme: Implement Write Zeroes Kevin Wolf
2017-05-11 14:32 ` [Qemu-devel] [PULL 36/58] blockdev: use drained_begin/end for qmp_block_resize Kevin Wolf
2017-05-11 14:32 ` [Qemu-devel] [PULL 37/58] qemu-io: Improve alignment checks Kevin Wolf
2017-05-11 14:32 ` [Qemu-devel] [PULL 38/58] qemu-io: Switch 'alloc' command to byte-based length Kevin Wolf
2017-05-11 14:32 ` [Qemu-devel] [PULL 39/58] qemu-io: Switch 'map' output to byte-based reporting Kevin Wolf
2017-05-11 14:32 ` [Qemu-devel] [PULL 40/58] blkdebug: Sanity check block layer guarantees Kevin Wolf
2017-05-11 14:32 ` [Qemu-devel] [PULL 41/58] blkdebug: Refactor error injection Kevin Wolf
2017-05-11 14:32 ` [Qemu-devel] [PULL 42/58] blkdebug: Add pass-through write_zero and discard support Kevin Wolf
2017-05-11 14:32 ` [Qemu-devel] [PULL 43/58] blkdebug: Simplify override logic Kevin Wolf
2017-05-11 14:32 ` [Qemu-devel] [PULL 44/58] blkdebug: Add ability to override unmap geometries Kevin Wolf
2017-05-11 14:32 ` [Qemu-devel] [PULL 45/58] tests: Add coverage for recent block geometry fixes Kevin Wolf
2017-05-11 14:32 ` [Qemu-devel] [PULL 46/58] qcow2: Nicer variable names in qcow2_update_snapshot_refcount() Kevin Wolf
2017-05-11 14:32 ` [Qemu-devel] [PULL 47/58] qcow2: Use consistent switch indentation Kevin Wolf
2017-05-11 14:32 ` [Qemu-devel] [PULL 48/58] block: Update comments on BDRV_BLOCK_* meanings Kevin Wolf
2017-05-11 14:32 ` [Qemu-devel] [PULL 49/58] qcow2: Correctly report status of preallocated zero clusters Kevin Wolf
2017-05-11 14:32 ` [Qemu-devel] [PULL 50/58] qcow2: Name typedef for cluster type Kevin Wolf
2017-05-11 14:32 ` [Qemu-devel] [PULL 51/58] qcow2: Make distinction between zero cluster types obvious Kevin Wolf
2017-05-11 14:32 ` [Qemu-devel] [PULL 52/58] qcow2: Optimize zero_single_l2() to minimize L2 churn Kevin Wolf
2017-05-11 14:32 ` [Qemu-devel] [PULL 53/58] iotests: Improve _filter_qemu_img_map Kevin Wolf
2017-05-11 14:32 ` Kevin Wolf [this message]
2017-05-11 14:32 ` [Qemu-devel] [PULL 55/58] qcow2: Optimize write zero of unaligned tail cluster Kevin Wolf
2017-05-11 14:32 ` [Qemu-devel] [PULL 56/58] qcow2: Assert that cluster operations are aligned Kevin Wolf
2017-05-11 14:33 ` [Qemu-devel] [PULL 57/58] qcow2: Discard/zero clusters by byte count Kevin Wolf
2017-05-11 14:33 ` [Qemu-devel] [PULL 58/58] MAINTAINERS: Add qemu-progress to the block layer Kevin Wolf
2017-05-12 13:39 ` [Qemu-devel] [PULL 00/58] Block layer patches Stefan Hajnoczi
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1494513181-7900-55-git-send-email-kwolf@redhat.com \
--to=kwolf@redhat.com \
--cc=qemu-block@nongnu.org \
--cc=qemu-devel@nongnu.org \
--cc=stefanha@redhat.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).