qemu-devel.nongnu.org archive mirror
 help / color / mirror / Atom feed
From: Subbaraya Sundeep <sundeep.lkml@gmail.com>
To: qemu-devel@nongnu.org, qemu-arm@nongnu.org
Cc: peter.maydell@linaro.org, crosthwaite.peter@gmail.com,
	alistair23@gmail.com, f4bug@amsat.org,
	Subbaraya Sundeep <sundeep.lkml@gmail.com>
Subject: [Qemu-devel] [Qemu devel v5 PATCH 5/5] msf2: Add Emcraft's Smartfusion2 SOM kit.
Date: Tue, 16 May 2017 21:08:53 +0530	[thread overview]
Message-ID: <1494949133-2202-6-git-send-email-sundeep.lkml@gmail.com> (raw)
In-Reply-To: <1494949133-2202-1-git-send-email-sundeep.lkml@gmail.com>

Emulated Emcraft's Smartfusion2 System On Module starter
kit.

Signed-off-by: Subbaraya Sundeep <sundeep.lkml@gmail.com>
---
 hw/arm/Makefile.objs |  1 +
 hw/arm/msf2-som.c    | 89 ++++++++++++++++++++++++++++++++++++++++++++++++++++
 2 files changed, 90 insertions(+)
 create mode 100644 hw/arm/msf2-som.c

diff --git a/hw/arm/Makefile.objs b/hw/arm/Makefile.objs
index c828061..4b02093 100644
--- a/hw/arm/Makefile.objs
+++ b/hw/arm/Makefile.objs
@@ -5,6 +5,7 @@ obj-y += omap_sx1.o palm.o realview.o spitz.o stellaris.o
 obj-y += tosa.o versatilepb.o vexpress.o virt.o xilinx_zynq.o z2.o
 obj-$(CONFIG_ACPI) += virt-acpi-build.o
 obj-y += netduino2.o
+obj-y += msf2-som.o
 obj-y += sysbus-fdt.o
 
 obj-y += armv7m.o exynos4210.o pxa2xx.o pxa2xx_gpio.o pxa2xx_pic.o
diff --git a/hw/arm/msf2-som.c b/hw/arm/msf2-som.c
new file mode 100644
index 0000000..cd2b759
--- /dev/null
+++ b/hw/arm/msf2-som.c
@@ -0,0 +1,89 @@
+/*
+ * SmartFusion2 SOM starter kit(from Emcraft) emulation.
+ *
+ * Copyright (c) 2017 Subbaraya Sundeep <sundeep.lkml@gmail.com>
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
+ * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ * THE SOFTWARE.
+ */
+
+#include "qemu/osdep.h"
+#include "qapi/error.h"
+#include "hw/boards.h"
+#include "hw/arm/msf2-soc.h"
+#include "hw/arm/arm.h"
+#include "exec/address-spaces.h"
+
+#define DDR_BASE_ADDRESS      0xA0000000
+#define DDR_SIZE              (64 * M_BYTE)
+
+static void emcraft_sf2_init(MachineState *machine)
+{
+    DeviceState *dev;
+    DeviceState *spi_flash;
+    MSF2State *soc;
+    DriveInfo *dinfo = drive_get_next(IF_MTD);
+    qemu_irq cs_line;
+    SSIBus *spi_bus;
+    MemoryRegion *sysmem = get_system_memory();
+    MemoryRegion *ddr = g_new(MemoryRegion, 1);
+
+    memory_region_init_ram(ddr, NULL, "ddr-ram", DDR_SIZE,
+                           &error_fatal);
+    vmstate_register_ram_global(ddr);
+    memory_region_add_subregion(sysmem, DDR_BASE_ADDRESS, ddr);
+
+    dev = qdev_create(NULL, TYPE_MSF2_SOC);
+    qdev_prop_set_string(dev, "part-name", "M2S010");
+    qdev_prop_set_uint64(dev, "eNVM-size", M2S010_ENVM_SIZE);
+    qdev_prop_set_uint64(dev, "eSRAM-size", M2S010_ESRAM_SIZE);
+
+    /*
+     * pclk0 and pclk1 are configurable in Libero.
+     * Emcraft's SoM kit comes with these settings by default.
+     */
+    qdev_prop_set_uint32(dev, "pclk0", 71 * 1000000);
+    qdev_prop_set_uint32(dev, "pclk1", 71 * 1000000);
+
+    object_property_set_bool(OBJECT(dev), true, "realized", &error_fatal);
+
+    soc = MSF2_SOC(dev);
+
+    /* Attach SPI flash to SPI0 controller */
+    spi_bus = (SSIBus *)qdev_get_child_bus(dev, "spi0");
+    spi_flash = ssi_create_slave_no_init(spi_bus, "s25sl12801");
+    qdev_prop_set_uint8(spi_flash, "spansion-cr2nv", 1);
+    if (dinfo) {
+        qdev_prop_set_drive(spi_flash, "drive", blk_by_legacy_dinfo(dinfo),
+                                    &error_fatal);
+    }
+    qdev_init_nofail(spi_flash);
+    cs_line = qdev_get_gpio_in_named(spi_flash, SSI_GPIO_CS, 0);
+    sysbus_connect_irq(SYS_BUS_DEVICE(&soc->spi[0]), 1, cs_line);
+
+    armv7m_load_kernel(ARM_CPU(first_cpu), machine->kernel_filename,
+                       soc->envm_size);
+}
+
+static void emcraft_sf2_machine_init(MachineClass *mc)
+{
+    mc->desc = "SmartFusion2 SOM kit from Emcraft";
+    mc->init = emcraft_sf2_init;
+}
+
+DEFINE_MACHINE("smartfusion2-som", emcraft_sf2_machine_init)
-- 
2.5.0

  parent reply	other threads:[~2017-05-16 15:39 UTC|newest]

Thread overview: 35+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2017-05-16 15:38 [Qemu-devel] [Qemu devel v5 PATCH 0/5] Add support for Smartfusion2 SoC Subbaraya Sundeep
2017-05-16 15:38 ` [Qemu-devel] [Qemu devel v5 PATCH 1/5] msf2: Add Smartfusion2 System timer Subbaraya Sundeep
2017-05-30 12:43   ` Philippe Mathieu-Daudé
2017-06-24 12:25     ` sundeep subbaraya
2017-05-16 15:38 ` [Qemu-devel] [Qemu devel v5 PATCH 2/5] msf2: Microsemi Smartfusion2 System Register block Subbaraya Sundeep
2017-05-30 12:51   ` Philippe Mathieu-Daudé
2017-06-24 12:48     ` sundeep subbaraya
2017-05-16 15:38 ` [Qemu-devel] [Qemu devel v5 PATCH 3/5] msf2: Add Smartfusion2 SPI controller Subbaraya Sundeep
2017-05-30 13:15   ` Philippe Mathieu-Daudé
2017-06-24  7:42     ` sundeep subbaraya
2017-05-16 15:38 ` [Qemu-devel] [Qemu devel v5 PATCH 4/5] msf2: Add Smartfusion2 SoC Subbaraya Sundeep
2017-05-26 23:48   ` Alistair Francis
2017-05-29  5:17     ` sundeep subbaraya
2017-05-30 22:33       ` Alistair Francis
2017-06-06  7:33         ` sundeep subbaraya
2017-05-31  5:43   ` Philippe Mathieu-Daudé
2017-06-06  7:35     ` sundeep subbaraya
2017-05-16 15:38 ` Subbaraya Sundeep [this message]
2017-05-27  0:00   ` [Qemu-devel] [Qemu devel v5 PATCH 5/5] msf2: Add Emcraft's Smartfusion2 SOM kit Alistair Francis
2017-05-29  5:26     ` sundeep subbaraya
2017-05-30 22:32       ` Alistair Francis
2017-06-26 16:01         ` sundeep subbaraya
2017-06-26 22:49           ` Alistair Francis
2017-06-28  6:04             ` sundeep subbaraya
2017-05-31  6:04   ` Philippe Mathieu-Daudé
2017-06-06  7:31     ` sundeep subbaraya
2017-05-17  4:27 ` [Qemu-devel] [Qemu devel v5 PATCH 0/5] Add support for Smartfusion2 SoC Philippe Mathieu-Daudé
2017-05-17  9:39   ` sundeep subbaraya
2017-05-29  5:28     ` sundeep subbaraya
2017-05-31  5:36       ` Philippe Mathieu-Daudé
2017-06-09  7:21         ` sundeep subbaraya
2017-06-26 16:11           ` sundeep subbaraya
2017-07-02 17:39             ` sundeep subbaraya
2017-07-02 21:00               ` Peter Maydell
2017-07-03  4:46                 ` sundeep subbaraya

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1494949133-2202-6-git-send-email-sundeep.lkml@gmail.com \
    --to=sundeep.lkml@gmail.com \
    --cc=alistair23@gmail.com \
    --cc=crosthwaite.peter@gmail.com \
    --cc=f4bug@amsat.org \
    --cc=peter.maydell@linaro.org \
    --cc=qemu-arm@nongnu.org \
    --cc=qemu-devel@nongnu.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).