qemu-devel.nongnu.org archive mirror
 help / color / mirror / Atom feed
From: Paolo Bonzini <pbonzini@redhat.com>
To: qemu-devel@nongnu.org
Cc: Xiao Guangrong <xiaoguangrong@tencent.com>
Subject: [Qemu-devel] [PULL 04/20] mc146818rtc: drop unnecessary '#ifdef TARGET_I386'
Date: Fri, 19 May 2017 13:20:56 +0200	[thread overview]
Message-ID: <1495192872-27667-5-git-send-email-pbonzini@redhat.com> (raw)
In-Reply-To: <1495192872-27667-1-git-send-email-pbonzini@redhat.com>

From: Xiao Guangrong <xiaoguangrong@tencent.com>

If the code purely depends on LOST_TICK_POLICY_SLEW, we can simply
drop '#ifdef TARGET_I386' as only x86 can enable this tick policy

Signed-off-by: Xiao Guangrong <xiaoguangrong@tencent.com>
Message-Id: <20170510083259.3900-5-xiaoguangrong@tencent.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
---
 hw/timer/mc146818rtc.c | 16 +++-------------
 1 file changed, 3 insertions(+), 13 deletions(-)

diff --git a/hw/timer/mc146818rtc.c b/hw/timer/mc146818rtc.c
index 4870a72..f9d6181 100644
--- a/hw/timer/mc146818rtc.c
+++ b/hw/timer/mc146818rtc.c
@@ -112,7 +112,6 @@ static uint64_t get_guest_rtc_ns(RTCState *s)
         guest_clock - s->last_update + s->offset;
 }
 
-#ifdef TARGET_I386
 static void rtc_coalesced_timer_update(RTCState *s)
 {
     if (s->irq_coalesced == 0) {
@@ -126,6 +125,7 @@ static void rtc_coalesced_timer_update(RTCState *s)
     }
 }
 
+#ifdef TARGET_I386
 static void rtc_coalesced_timer(void *opaque)
 {
     RTCState *s = opaque;
@@ -198,7 +198,6 @@ periodic_timer_update(RTCState *s, int64_t current_time, uint32_t old_period)
             assert(lost_clock >= 0);
         }
 
-#ifdef TARGET_I386
         /*
          * s->irq_coalesced can change for two reasons:
          *
@@ -227,9 +226,7 @@ periodic_timer_update(RTCState *s, int64_t current_time, uint32_t old_period)
                           s->irq_coalesced, old_period, s->period);
                 rtc_coalesced_timer_update(s);
             }
-        } else
-#endif
-        {
+        } else {
            /*
              * no way to compensate the interrupt if LOST_TICK_POLICY_SLEW
              * is not used, we should make the time progress anyway.
@@ -244,9 +241,7 @@ periodic_timer_update(RTCState *s, int64_t current_time, uint32_t old_period)
                                          RTC_CLOCK_RATE) + 1;
         timer_mod(s->periodic_timer, s->next_periodic_time);
     } else {
-#ifdef TARGET_I386
         s->irq_coalesced = 0;
-#endif
         timer_del(s->periodic_timer);
     }
 }
@@ -835,13 +830,11 @@ static int rtc_post_load(void *opaque, int version_id)
         }
     }
 
-#ifdef TARGET_I386
     if (version_id >= 2) {
         if (s->lost_tick_policy == LOST_TICK_POLICY_SLEW) {
             rtc_coalesced_timer_update(s);
         }
     }
-#endif
     return 0;
 }
 
@@ -898,11 +891,10 @@ static void rtc_notify_clock_reset(Notifier *notifier, void *data)
     rtc_set_date_from_host(ISA_DEVICE(s));
     periodic_timer_update(s, now, 0);
     check_update_timer(s);
-#ifdef TARGET_I386
+
     if (s->lost_tick_policy == LOST_TICK_POLICY_SLEW) {
         rtc_coalesced_timer_update(s);
     }
-#endif
 }
 
 /* set CMOS shutdown status register (index 0xF) as S3_resume(0xFE)
@@ -923,12 +915,10 @@ static void rtc_reset(void *opaque)
 
     qemu_irq_lower(s->irq);
 
-#ifdef TARGET_I386
     if (s->lost_tick_policy == LOST_TICK_POLICY_SLEW) {
         s->irq_coalesced = 0;
         s->irq_reinject_on_ack_count = 0;		
     }
-#endif
 }
 
 static const MemoryRegionOps cmos_ops = {
-- 
1.8.3.1

  parent reply	other threads:[~2017-05-19 11:21 UTC|newest]

Thread overview: 27+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2017-05-19 11:20 [Qemu-devel] [PULL 00/20] Misc patches for 2017-05-19 Paolo Bonzini
2017-05-19 11:20 ` [Qemu-devel] [PULL 01/20] mc146818rtc: update periodic timer only if it is needed Paolo Bonzini
2017-05-19 11:20 ` [Qemu-devel] [PULL 02/20] mc146818rtc: precisely count the clock for periodic timer Paolo Bonzini
2017-05-19 11:20 ` [Qemu-devel] [PULL 03/20] mc146818rtc: ensure LOST_TICK_POLICY_SLEW is only enabled on TARGET_I386 Paolo Bonzini
2017-05-19 11:20 ` Paolo Bonzini [this message]
2017-05-19 11:20 ` [Qemu-devel] [PULL 05/20] mc146818rtc: embrace all x86 specific code Paolo Bonzini
2017-05-19 11:20 ` [Qemu-devel] [PULL 06/20] kvm: irqchip: trace changes on msi add/remove Paolo Bonzini
2017-05-19 11:20 ` [Qemu-devel] [PULL 07/20] msix: trace control bit write op Paolo Bonzini
2017-05-19 11:21 ` [Qemu-devel] [PULL 08/20] kvm: irqchip: skip update msi when disabled Paolo Bonzini
2017-05-19 11:21 ` [Qemu-devel] [PULL 09/20] Check the return value of fcntl in qemu_set_cloexec Paolo Bonzini
2017-05-19 11:21 ` [Qemu-devel] [PULL 10/20] nbd: strict nbd_wr_syncv Paolo Bonzini
2017-05-19 11:21 ` [Qemu-devel] [PULL 11/20] nbd: read_sync and friends: return 0 on success Paolo Bonzini
2017-05-19 11:21 ` [Qemu-devel] [PULL 12/20] nbd: add errp parameter to nbd_wr_syncv() Paolo Bonzini
2017-05-19 11:21 ` [Qemu-devel] [PULL 13/20] nbd: add errp to read_sync, write_sync and drop_sync Paolo Bonzini
2017-05-19 11:21 ` [Qemu-devel] [PULL 14/20] nbd/client.c: use errp instead of LOG Paolo Bonzini
2017-05-26 11:09   ` [Qemu-devel] [PATCH v2] " Vladimir Sementsov-Ogievskiy
2017-05-26 13:43     ` Eric Blake
2017-05-19 11:21 ` [Qemu-devel] [PULL 15/20] exec: simplify phys_page_find() params Paolo Bonzini
2017-05-19 11:21 ` [Qemu-devel] [PULL 16/20] virtio-scsi: Unset hotplug handler when unrealize Paolo Bonzini
2017-05-19 11:21 ` [Qemu-devel] [PULL 17/20] vhost-user-scsi: Introduce vhost-user-scsi host device Paolo Bonzini
2017-05-19 11:21 ` [Qemu-devel] [PULL 18/20] vhost-user-scsi: Introduce a vhost-user-scsi sample application Paolo Bonzini
2017-05-19 11:21 ` [Qemu-devel] [PULL 19/20] target/i386: enable A20 automatically in system management mode Paolo Bonzini
2017-05-19 11:21 ` [Qemu-devel] [PULL 20/20] target/i386: use multiple CPU AddressSpaces Paolo Bonzini
2017-05-19 12:41 ` [Qemu-devel] [PULL 00/20] Misc patches for 2017-05-19 no-reply
2017-05-19 15:51   ` Stefan Hajnoczi
2017-05-19 16:09     ` Paolo Bonzini
2017-05-19 15:49 ` Stefan Hajnoczi

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1495192872-27667-5-git-send-email-pbonzini@redhat.com \
    --to=pbonzini@redhat.com \
    --cc=qemu-devel@nongnu.org \
    --cc=xiaoguangrong@tencent.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).