From: Paolo Bonzini <pbonzini@redhat.com>
To: qemu-devel@nongnu.org
Cc: Yang Zhong <yang.zhong@intel.com>
Subject: [Qemu-devel] [PULL 37/42] target/i386: move cpu_sync_bndcs_hflags() function
Date: Wed, 5 Jul 2017 09:14:40 +0200 [thread overview]
Message-ID: <1499238885-26161-38-git-send-email-pbonzini@redhat.com> (raw)
In-Reply-To: <1499238885-26161-1-git-send-email-pbonzini@redhat.com>
From: Yang Zhong <yang.zhong@intel.com>
Move cpu_sync_bndcs_hflags() function from mpx_helper.c
to helper.c because mpx_helper.c need be disabled when
tcg is disabled.
Signed-off-by: Yang Zhong <yang.zhong@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
---
target/i386/helper.c | 30 ++++++++++++++++++++++++++++++
target/i386/mpx_helper.c | 30 ------------------------------
2 files changed, 30 insertions(+), 30 deletions(-)
diff --git a/target/i386/helper.c b/target/i386/helper.c
index ef05059..4d584b5 100644
--- a/target/i386/helper.c
+++ b/target/i386/helper.c
@@ -29,6 +29,36 @@
#include "hw/i386/apic_internal.h"
#endif
+void cpu_sync_bndcs_hflags(CPUX86State *env)
+{
+ uint32_t hflags = env->hflags;
+ uint32_t hflags2 = env->hflags2;
+ uint32_t bndcsr;
+
+ if ((hflags & HF_CPL_MASK) == 3) {
+ bndcsr = env->bndcs_regs.cfgu;
+ } else {
+ bndcsr = env->msr_bndcfgs;
+ }
+
+ if ((env->cr[4] & CR4_OSXSAVE_MASK)
+ && (env->xcr0 & XSTATE_BNDCSR_MASK)
+ && (bndcsr & BNDCFG_ENABLE)) {
+ hflags |= HF_MPX_EN_MASK;
+ } else {
+ hflags &= ~HF_MPX_EN_MASK;
+ }
+
+ if (bndcsr & BNDCFG_BNDPRESERVE) {
+ hflags2 |= HF2_MPX_PR_MASK;
+ } else {
+ hflags2 &= ~HF2_MPX_PR_MASK;
+ }
+
+ env->hflags = hflags;
+ env->hflags2 = hflags2;
+}
+
static void cpu_x86_version(CPUX86State *env, int *family, int *model)
{
int cpuver = env->cpuid_version;
diff --git a/target/i386/mpx_helper.c b/target/i386/mpx_helper.c
index 7e44820..ade5d24 100644
--- a/target/i386/mpx_helper.c
+++ b/target/i386/mpx_helper.c
@@ -24,36 +24,6 @@
#include "exec/exec-all.h"
-void cpu_sync_bndcs_hflags(CPUX86State *env)
-{
- uint32_t hflags = env->hflags;
- uint32_t hflags2 = env->hflags2;
- uint32_t bndcsr;
-
- if ((hflags & HF_CPL_MASK) == 3) {
- bndcsr = env->bndcs_regs.cfgu;
- } else {
- bndcsr = env->msr_bndcfgs;
- }
-
- if ((env->cr[4] & CR4_OSXSAVE_MASK)
- && (env->xcr0 & XSTATE_BNDCSR_MASK)
- && (bndcsr & BNDCFG_ENABLE)) {
- hflags |= HF_MPX_EN_MASK;
- } else {
- hflags &= ~HF_MPX_EN_MASK;
- }
-
- if (bndcsr & BNDCFG_BNDPRESERVE) {
- hflags2 |= HF2_MPX_PR_MASK;
- } else {
- hflags2 &= ~HF2_MPX_PR_MASK;
- }
-
- env->hflags = hflags;
- env->hflags2 = hflags2;
-}
-
void helper_bndck(CPUX86State *env, uint32_t fail)
{
if (unlikely(fail)) {
--
1.8.3.1
next prev parent reply other threads:[~2017-07-05 7:15 UTC|newest]
Thread overview: 56+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-07-05 7:14 [Qemu-devel] [PULL 00/42] Misc changes for 2017-07-05 Paolo Bonzini
2017-07-05 7:14 ` [Qemu-devel] [PULL 01/42] vcpu_dirty: share the same field in CPUState for all accelerators Paolo Bonzini
2017-07-05 7:14 ` [Qemu-devel] [PULL 02/42] qemu-doc: Add missing "@c man end" statements Paolo Bonzini
2017-07-05 7:14 ` [Qemu-devel] [PULL 03/42] nbd: fix NBD over TLS Paolo Bonzini
2017-07-05 7:14 ` [Qemu-devel] [PULL 04/42] target/i386: fix interrupt CPL error when using ist in x86-64 Paolo Bonzini
2017-07-05 7:14 ` [Qemu-devel] [PULL 05/42] target/i386: simplify handling of conforming code segments on interrupt Paolo Bonzini
2017-07-05 7:14 ` [Qemu-devel] [PULL 06/42] include/exec/poison: Add some more missing TARGET and CONFIG defines Paolo Bonzini
2017-07-05 7:14 ` [Qemu-devel] [PULL 07/42] Move CONFIG_KVM related definitions to kvm_i386.h Paolo Bonzini
2017-07-05 7:14 ` [Qemu-devel] [PULL 08/42] include/exec/poison: Mark CONFIG_KVM as poisoned, too Paolo Bonzini
2017-07-05 7:14 ` [Qemu-devel] [PULL 09/42] cpu: Introduce a wrapper for tlb_flush() that can be used in common code Paolo Bonzini
2017-07-05 7:14 ` [Qemu-devel] [PULL 10/42] include/exec/poison: Mark CONFIG_SOFTMMU as poisoned Paolo Bonzini
2017-07-05 7:14 ` [Qemu-devel] [PULL 11/42] Makefile: Move bootdevice.o to common-obj-y Paolo Bonzini
2017-07-05 7:14 ` [Qemu-devel] [PULL 12/42] hw/misc/edu: Compile the edu device as common object Paolo Bonzini
2017-07-05 7:14 ` [Qemu-devel] [PULL 13/42] sockets: avoid formatting buffer that may not be NUL terminated Paolo Bonzini
2017-07-05 7:14 ` [Qemu-devel] [PULL 14/42] xsave_helper: pull xsave and xrstor out of kvm.c into helper function Paolo Bonzini
2017-07-05 7:14 ` [Qemu-devel] [PULL 15/42] util/oslib-win32: Remove if conditional Paolo Bonzini
2017-07-05 7:14 ` [Qemu-devel] [PULL 16/42] tests/test-char.c: Don't use main_loop_wait()'s return value Paolo Bonzini
2017-07-05 7:14 ` [Qemu-devel] [PULL 17/42] main_loop: Make main_loop_wait() return void Paolo Bonzini
2017-07-05 7:14 ` [Qemu-devel] [PULL 18/42] checkpatch: should not use signal except for SIG_DFL or SIG_IGN Paolo Bonzini
2017-07-05 7:14 ` [Qemu-devel] [PULL 19/42] virtio-scsi: finalize IOMMU support Paolo Bonzini
2017-07-05 7:14 ` [Qemu-devel] [PULL 20/42] qemu-thread: Assert locks are initialized before using Paolo Bonzini
2017-07-05 7:14 ` [Qemu-devel] [PULL 21/42] qemu-doc: do not refer to years-old version numbers Paolo Bonzini
2017-07-05 7:14 ` [Qemu-devel] [PULL 22/42] configure: factor out list of supported Xen/KVM/HAX targets Paolo Bonzini
2017-07-10 15:49 ` Peter Maydell
2017-07-10 16:14 ` Paolo Bonzini
2017-07-10 16:24 ` Peter Maydell
2017-07-10 16:28 ` Paolo Bonzini
2017-07-14 15:26 ` Philippe Mathieu-Daudé
2017-07-14 16:58 ` Paolo Bonzini
2017-07-12 0:24 ` Stefano Stabellini
2017-07-10 16:29 ` Anthony PERARD
2017-07-05 7:14 ` [Qemu-devel] [PULL 23/42] configure: early test for supported targets Paolo Bonzini
2017-07-05 7:14 ` [Qemu-devel] [PULL 24/42] configure: add --disable-tcg configure option Paolo Bonzini
2017-07-14 5:24 ` Philippe Mathieu-Daudé
2017-07-14 9:02 ` Paolo Bonzini
2017-07-14 15:33 ` Philippe Mathieu-Daudé
2017-07-05 7:14 ` [Qemu-devel] [PULL 25/42] vl: convert -tb-size to qemu_strtoul Paolo Bonzini
2017-07-05 7:14 ` [Qemu-devel] [PULL 26/42] vl: add tcg_enabled() for tcg related code Paolo Bonzini
2017-07-05 7:14 ` [Qemu-devel] [PULL 27/42] tcg: move page_size_init() function Paolo Bonzini
2017-07-05 7:14 ` [Qemu-devel] [PULL 28/42] cpu: move interrupt handling out of translate-common.c Paolo Bonzini
2017-07-05 7:14 ` [Qemu-devel] [PULL 29/42] tcg: make tcg_allowed global Paolo Bonzini
2017-07-05 7:14 ` [Qemu-devel] [PULL 30/42] monitor: disable "info jit" and "info opcount" if !TCG Paolo Bonzini
2017-07-05 7:14 ` [Qemu-devel] [PULL 31/42] vapic: use tcg_enabled Paolo Bonzini
2017-07-05 7:14 ` [Qemu-devel] [PULL 32/42] tcg: add the tcg-stub.c file into accel/stubs/ Paolo Bonzini
2017-07-05 7:14 ` [Qemu-devel] [PULL 33/42] tcg: move tb_lock out of translate-all.h Paolo Bonzini
2017-07-05 7:14 ` [Qemu-devel] [PULL 34/42] exec: elide calls to tb_lock and tb_unlock Paolo Bonzini
2017-07-05 7:14 ` [Qemu-devel] [PULL 35/42] tcg: add CONFIG_TCG guards in headers Paolo Bonzini
2017-07-05 7:14 ` [Qemu-devel] [PULL 36/42] tcg: add the CONFIG_TCG into Makefiles Paolo Bonzini
2017-07-05 7:14 ` Paolo Bonzini [this message]
2017-07-05 7:14 ` [Qemu-devel] [PULL 38/42] target/i386: make cpu_get_fp80()/cpu_set_fp80() static Paolo Bonzini
2017-07-05 7:14 ` [Qemu-devel] [PULL 39/42] target/i386: split cpu_set_mxcsr() and make cpu_set_fpuc() inline Paolo Bonzini
2017-07-05 7:14 ` [Qemu-devel] [PULL 40/42] target/i386: move TLB refill function out of helper.c Paolo Bonzini
2017-07-05 7:14 ` [Qemu-devel] [PULL 41/42] target/i386: add the tcg_enabled() in target/i386/ Paolo Bonzini
2017-07-05 7:14 ` [Qemu-devel] [PULL 42/42] target/i386: add the CONFIG_TCG into Makefiles Paolo Bonzini
2017-07-06 10:42 ` [Qemu-devel] [PULL 00/42] Misc changes for 2017-07-05 Peter Maydell
2017-07-06 14:01 ` no-reply
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1499238885-26161-38-git-send-email-pbonzini@redhat.com \
--to=pbonzini@redhat.com \
--cc=qemu-devel@nongnu.org \
--cc=yang.zhong@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).