From: Paolo Bonzini <pbonzini@redhat.com>
To: qemu-devel@nongnu.org
Cc: Yang Zhong <yang.zhong@intel.com>
Subject: [Qemu-devel] [PULL 39/42] target/i386: split cpu_set_mxcsr() and make cpu_set_fpuc() inline
Date: Wed, 5 Jul 2017 09:14:42 +0200 [thread overview]
Message-ID: <1499238885-26161-40-git-send-email-pbonzini@redhat.com> (raw)
In-Reply-To: <1499238885-26161-1-git-send-email-pbonzini@redhat.com>
From: Yang Zhong <yang.zhong@intel.com>
Split the cpu_set_mxcsr() and make cpu_set_fpuc() inline with specific
tcg code.
Signed-off-by: Yang Zhong <yang.zhong@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
---
target/i386/cpu.h | 21 ++++++++++++++++++---
target/i386/fpu_helper.c | 11 ++---------
target/i386/machine.c | 5 ++++-
3 files changed, 24 insertions(+), 13 deletions(-)
diff --git a/target/i386/cpu.h b/target/i386/cpu.h
index 8d9ba36..3495a91 100644
--- a/target/i386/cpu.h
+++ b/target/i386/cpu.h
@@ -1594,7 +1594,6 @@ void QEMU_NORETURN raise_interrupt(CPUX86State *nenv, int intno, int is_int,
/* cc_helper.c */
extern const uint8_t parity_table[256];
uint32_t cpu_cc_compute_all(CPUX86State *env1, int op);
-void update_fp_status(CPUX86State *env);
static inline uint32_t cpu_compute_eflags(CPUX86State *env)
{
@@ -1643,8 +1642,24 @@ static inline int32_t x86_get_a20_mask(CPUX86State *env)
}
/* fpu_helper.c */
-void cpu_set_mxcsr(CPUX86State *env, uint32_t val);
-void cpu_set_fpuc(CPUX86State *env, uint16_t val);
+void update_fp_status(CPUX86State *env);
+void update_mxcsr_status(CPUX86State *env);
+
+static inline void cpu_set_mxcsr(CPUX86State *env, uint32_t mxcsr)
+{
+ env->mxcsr = mxcsr;
+ if (tcg_enabled()) {
+ update_mxcsr_status(env);
+ }
+}
+
+static inline void cpu_set_fpuc(CPUX86State *env, uint16_t fpuc)
+{
+ env->fpuc = fpuc;
+ if (tcg_enabled()) {
+ update_fp_status(env);
+ }
+}
/* mem_helper.c */
void helper_lock_init(void);
diff --git a/target/i386/fpu_helper.c b/target/i386/fpu_helper.c
index 34fb5fc..9014b6f 100644
--- a/target/i386/fpu_helper.c
+++ b/target/i386/fpu_helper.c
@@ -1550,12 +1550,11 @@ void helper_xsetbv(CPUX86State *env, uint32_t ecx, uint64_t mask)
#define SSE_RC_CHOP 0x6000
#define SSE_FZ 0x8000
-void cpu_set_mxcsr(CPUX86State *env, uint32_t mxcsr)
+void update_mxcsr_status(CPUX86State *env)
{
+ uint32_t mxcsr = env->mxcsr;
int rnd_type;
- env->mxcsr = mxcsr;
-
/* set rounding mode */
switch (mxcsr & SSE_RC_MASK) {
default:
@@ -1581,12 +1580,6 @@ void cpu_set_mxcsr(CPUX86State *env, uint32_t mxcsr)
set_flush_to_zero((mxcsr & SSE_FZ) ? 1 : 0, &env->fp_status);
}
-void cpu_set_fpuc(CPUX86State *env, uint16_t val)
-{
- env->fpuc = val;
- update_fp_status(env);
-}
-
void helper_ldmxcsr(CPUX86State *env, uint32_t val)
{
cpu_set_mxcsr(env, val);
diff --git a/target/i386/machine.c b/target/i386/machine.c
index 53587ae..e0417fe 100644
--- a/target/i386/machine.c
+++ b/target/i386/machine.c
@@ -280,7 +280,10 @@ static int cpu_post_load(void *opaque, int version_id)
for(i = 0; i < 8; i++) {
env->fptags[i] = (env->fptag_vmstate >> i) & 1;
}
- update_fp_status(env);
+ if (tcg_enabled()) {
+ update_fp_status(env);
+ update_mxcsr_status(env);
+ }
cpu_breakpoint_remove_all(cs, BP_CPU);
cpu_watchpoint_remove_all(cs, BP_CPU);
--
1.8.3.1
next prev parent reply other threads:[~2017-07-05 7:15 UTC|newest]
Thread overview: 56+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-07-05 7:14 [Qemu-devel] [PULL 00/42] Misc changes for 2017-07-05 Paolo Bonzini
2017-07-05 7:14 ` [Qemu-devel] [PULL 01/42] vcpu_dirty: share the same field in CPUState for all accelerators Paolo Bonzini
2017-07-05 7:14 ` [Qemu-devel] [PULL 02/42] qemu-doc: Add missing "@c man end" statements Paolo Bonzini
2017-07-05 7:14 ` [Qemu-devel] [PULL 03/42] nbd: fix NBD over TLS Paolo Bonzini
2017-07-05 7:14 ` [Qemu-devel] [PULL 04/42] target/i386: fix interrupt CPL error when using ist in x86-64 Paolo Bonzini
2017-07-05 7:14 ` [Qemu-devel] [PULL 05/42] target/i386: simplify handling of conforming code segments on interrupt Paolo Bonzini
2017-07-05 7:14 ` [Qemu-devel] [PULL 06/42] include/exec/poison: Add some more missing TARGET and CONFIG defines Paolo Bonzini
2017-07-05 7:14 ` [Qemu-devel] [PULL 07/42] Move CONFIG_KVM related definitions to kvm_i386.h Paolo Bonzini
2017-07-05 7:14 ` [Qemu-devel] [PULL 08/42] include/exec/poison: Mark CONFIG_KVM as poisoned, too Paolo Bonzini
2017-07-05 7:14 ` [Qemu-devel] [PULL 09/42] cpu: Introduce a wrapper for tlb_flush() that can be used in common code Paolo Bonzini
2017-07-05 7:14 ` [Qemu-devel] [PULL 10/42] include/exec/poison: Mark CONFIG_SOFTMMU as poisoned Paolo Bonzini
2017-07-05 7:14 ` [Qemu-devel] [PULL 11/42] Makefile: Move bootdevice.o to common-obj-y Paolo Bonzini
2017-07-05 7:14 ` [Qemu-devel] [PULL 12/42] hw/misc/edu: Compile the edu device as common object Paolo Bonzini
2017-07-05 7:14 ` [Qemu-devel] [PULL 13/42] sockets: avoid formatting buffer that may not be NUL terminated Paolo Bonzini
2017-07-05 7:14 ` [Qemu-devel] [PULL 14/42] xsave_helper: pull xsave and xrstor out of kvm.c into helper function Paolo Bonzini
2017-07-05 7:14 ` [Qemu-devel] [PULL 15/42] util/oslib-win32: Remove if conditional Paolo Bonzini
2017-07-05 7:14 ` [Qemu-devel] [PULL 16/42] tests/test-char.c: Don't use main_loop_wait()'s return value Paolo Bonzini
2017-07-05 7:14 ` [Qemu-devel] [PULL 17/42] main_loop: Make main_loop_wait() return void Paolo Bonzini
2017-07-05 7:14 ` [Qemu-devel] [PULL 18/42] checkpatch: should not use signal except for SIG_DFL or SIG_IGN Paolo Bonzini
2017-07-05 7:14 ` [Qemu-devel] [PULL 19/42] virtio-scsi: finalize IOMMU support Paolo Bonzini
2017-07-05 7:14 ` [Qemu-devel] [PULL 20/42] qemu-thread: Assert locks are initialized before using Paolo Bonzini
2017-07-05 7:14 ` [Qemu-devel] [PULL 21/42] qemu-doc: do not refer to years-old version numbers Paolo Bonzini
2017-07-05 7:14 ` [Qemu-devel] [PULL 22/42] configure: factor out list of supported Xen/KVM/HAX targets Paolo Bonzini
2017-07-10 15:49 ` Peter Maydell
2017-07-10 16:14 ` Paolo Bonzini
2017-07-10 16:24 ` Peter Maydell
2017-07-10 16:28 ` Paolo Bonzini
2017-07-14 15:26 ` Philippe Mathieu-Daudé
2017-07-14 16:58 ` Paolo Bonzini
2017-07-12 0:24 ` Stefano Stabellini
2017-07-10 16:29 ` Anthony PERARD
2017-07-05 7:14 ` [Qemu-devel] [PULL 23/42] configure: early test for supported targets Paolo Bonzini
2017-07-05 7:14 ` [Qemu-devel] [PULL 24/42] configure: add --disable-tcg configure option Paolo Bonzini
2017-07-14 5:24 ` Philippe Mathieu-Daudé
2017-07-14 9:02 ` Paolo Bonzini
2017-07-14 15:33 ` Philippe Mathieu-Daudé
2017-07-05 7:14 ` [Qemu-devel] [PULL 25/42] vl: convert -tb-size to qemu_strtoul Paolo Bonzini
2017-07-05 7:14 ` [Qemu-devel] [PULL 26/42] vl: add tcg_enabled() for tcg related code Paolo Bonzini
2017-07-05 7:14 ` [Qemu-devel] [PULL 27/42] tcg: move page_size_init() function Paolo Bonzini
2017-07-05 7:14 ` [Qemu-devel] [PULL 28/42] cpu: move interrupt handling out of translate-common.c Paolo Bonzini
2017-07-05 7:14 ` [Qemu-devel] [PULL 29/42] tcg: make tcg_allowed global Paolo Bonzini
2017-07-05 7:14 ` [Qemu-devel] [PULL 30/42] monitor: disable "info jit" and "info opcount" if !TCG Paolo Bonzini
2017-07-05 7:14 ` [Qemu-devel] [PULL 31/42] vapic: use tcg_enabled Paolo Bonzini
2017-07-05 7:14 ` [Qemu-devel] [PULL 32/42] tcg: add the tcg-stub.c file into accel/stubs/ Paolo Bonzini
2017-07-05 7:14 ` [Qemu-devel] [PULL 33/42] tcg: move tb_lock out of translate-all.h Paolo Bonzini
2017-07-05 7:14 ` [Qemu-devel] [PULL 34/42] exec: elide calls to tb_lock and tb_unlock Paolo Bonzini
2017-07-05 7:14 ` [Qemu-devel] [PULL 35/42] tcg: add CONFIG_TCG guards in headers Paolo Bonzini
2017-07-05 7:14 ` [Qemu-devel] [PULL 36/42] tcg: add the CONFIG_TCG into Makefiles Paolo Bonzini
2017-07-05 7:14 ` [Qemu-devel] [PULL 37/42] target/i386: move cpu_sync_bndcs_hflags() function Paolo Bonzini
2017-07-05 7:14 ` [Qemu-devel] [PULL 38/42] target/i386: make cpu_get_fp80()/cpu_set_fp80() static Paolo Bonzini
2017-07-05 7:14 ` Paolo Bonzini [this message]
2017-07-05 7:14 ` [Qemu-devel] [PULL 40/42] target/i386: move TLB refill function out of helper.c Paolo Bonzini
2017-07-05 7:14 ` [Qemu-devel] [PULL 41/42] target/i386: add the tcg_enabled() in target/i386/ Paolo Bonzini
2017-07-05 7:14 ` [Qemu-devel] [PULL 42/42] target/i386: add the CONFIG_TCG into Makefiles Paolo Bonzini
2017-07-06 10:42 ` [Qemu-devel] [PULL 00/42] Misc changes for 2017-07-05 Peter Maydell
2017-07-06 14:01 ` no-reply
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1499238885-26161-40-git-send-email-pbonzini@redhat.com \
--to=pbonzini@redhat.com \
--cc=qemu-devel@nongnu.org \
--cc=yang.zhong@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).