From: Paolo Bonzini <pbonzini@redhat.com>
To: qemu-devel@nongnu.org
Subject: [Qemu-devel] [PULL 05/42] target/i386: simplify handling of conforming code segments on interrupt
Date: Wed, 5 Jul 2017 09:14:08 +0200 [thread overview]
Message-ID: <1499238885-26161-6-git-send-email-pbonzini@redhat.com> (raw)
In-Reply-To: <1499238885-26161-1-git-send-email-pbonzini@redhat.com>
Move the handling of conforming code segments before the handling
of stack switch.
Because dpl == cpl after the new "if", it's now unnecessary to check
the C bit when testing dpl < cpl. Furthermore, dpl > cpl is checked
slightly above the modified code, so the final "else" is unreachable
and we can remove it.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
---
target/i386/seg_helper.c | 28 ++++++++++------------------
1 file changed, 10 insertions(+), 18 deletions(-)
diff --git a/target/i386/seg_helper.c b/target/i386/seg_helper.c
index 9af69c2..600a4d7 100644
--- a/target/i386/seg_helper.c
+++ b/target/i386/seg_helper.c
@@ -692,7 +692,10 @@ static void do_interrupt_protected(CPUX86State *env, int intno, int is_int,
if (!(e2 & DESC_P_MASK)) {
raise_exception_err(env, EXCP0B_NOSEG, selector & 0xfffc);
}
- if (!(e2 & DESC_C_MASK) && dpl < cpl) {
+ if (e2 & DESC_C_MASK) {
+ dpl = cpl;
+ }
+ if (dpl < cpl) {
/* to inner privilege */
get_ss_esp_from_tss(env, &ss, &esp, dpl, 0);
if ((ss & 0xfffc) == 0) {
@@ -719,7 +722,7 @@ static void do_interrupt_protected(CPUX86State *env, int intno, int is_int,
new_stack = 1;
sp_mask = get_sp_mask(ss_e2);
ssp = get_seg_base(ss_e1, ss_e2);
- } else if ((e2 & DESC_C_MASK) || dpl == cpl) {
+ } else {
/* to same privilege */
if (vm86) {
raise_exception_err(env, EXCP0D_GPF, selector & 0xfffc);
@@ -728,13 +731,6 @@ static void do_interrupt_protected(CPUX86State *env, int intno, int is_int,
sp_mask = get_sp_mask(env->segs[R_SS].flags);
ssp = env->segs[R_SS].base;
esp = env->regs[R_ESP];
- dpl = cpl;
- } else {
- raise_exception_err(env, EXCP0D_GPF, selector & 0xfffc);
- new_stack = 0; /* avoid warning */
- sp_mask = 0; /* avoid warning */
- ssp = 0; /* avoid warning */
- esp = 0; /* avoid warning */
}
shift = type >> 3;
@@ -919,25 +915,21 @@ static void do_interrupt64(CPUX86State *env, int intno, int is_int,
if (!(e2 & DESC_L_MASK) || (e2 & DESC_B_MASK)) {
raise_exception_err(env, EXCP0D_GPF, selector & 0xfffc);
}
- if ((!(e2 & DESC_C_MASK) && dpl < cpl) || ist != 0) {
+ if (e2 & DESC_C_MASK) {
+ dpl = cpl;
+ }
+ if (dpl < cpl || ist != 0) {
/* to inner privilege */
new_stack = 1;
esp = get_rsp_from_tss(env, ist != 0 ? ist + 3 : dpl);
ss = 0;
- } else if ((e2 & DESC_C_MASK) || dpl == cpl) {
+ } else {
/* to same privilege */
if (env->eflags & VM_MASK) {
raise_exception_err(env, EXCP0D_GPF, selector & 0xfffc);
}
new_stack = 0;
esp = env->regs[R_ESP];
- } else {
- raise_exception_err(env, EXCP0D_GPF, selector & 0xfffc);
- new_stack = 0; /* avoid warning */
- esp = 0; /* avoid warning */
- }
- if (e2 & DESC_C_MASK) {
- dpl = cpl;
}
esp &= ~0xfLL; /* align stack */
--
1.8.3.1
next prev parent reply other threads:[~2017-07-05 7:14 UTC|newest]
Thread overview: 56+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-07-05 7:14 [Qemu-devel] [PULL 00/42] Misc changes for 2017-07-05 Paolo Bonzini
2017-07-05 7:14 ` [Qemu-devel] [PULL 01/42] vcpu_dirty: share the same field in CPUState for all accelerators Paolo Bonzini
2017-07-05 7:14 ` [Qemu-devel] [PULL 02/42] qemu-doc: Add missing "@c man end" statements Paolo Bonzini
2017-07-05 7:14 ` [Qemu-devel] [PULL 03/42] nbd: fix NBD over TLS Paolo Bonzini
2017-07-05 7:14 ` [Qemu-devel] [PULL 04/42] target/i386: fix interrupt CPL error when using ist in x86-64 Paolo Bonzini
2017-07-05 7:14 ` Paolo Bonzini [this message]
2017-07-05 7:14 ` [Qemu-devel] [PULL 06/42] include/exec/poison: Add some more missing TARGET and CONFIG defines Paolo Bonzini
2017-07-05 7:14 ` [Qemu-devel] [PULL 07/42] Move CONFIG_KVM related definitions to kvm_i386.h Paolo Bonzini
2017-07-05 7:14 ` [Qemu-devel] [PULL 08/42] include/exec/poison: Mark CONFIG_KVM as poisoned, too Paolo Bonzini
2017-07-05 7:14 ` [Qemu-devel] [PULL 09/42] cpu: Introduce a wrapper for tlb_flush() that can be used in common code Paolo Bonzini
2017-07-05 7:14 ` [Qemu-devel] [PULL 10/42] include/exec/poison: Mark CONFIG_SOFTMMU as poisoned Paolo Bonzini
2017-07-05 7:14 ` [Qemu-devel] [PULL 11/42] Makefile: Move bootdevice.o to common-obj-y Paolo Bonzini
2017-07-05 7:14 ` [Qemu-devel] [PULL 12/42] hw/misc/edu: Compile the edu device as common object Paolo Bonzini
2017-07-05 7:14 ` [Qemu-devel] [PULL 13/42] sockets: avoid formatting buffer that may not be NUL terminated Paolo Bonzini
2017-07-05 7:14 ` [Qemu-devel] [PULL 14/42] xsave_helper: pull xsave and xrstor out of kvm.c into helper function Paolo Bonzini
2017-07-05 7:14 ` [Qemu-devel] [PULL 15/42] util/oslib-win32: Remove if conditional Paolo Bonzini
2017-07-05 7:14 ` [Qemu-devel] [PULL 16/42] tests/test-char.c: Don't use main_loop_wait()'s return value Paolo Bonzini
2017-07-05 7:14 ` [Qemu-devel] [PULL 17/42] main_loop: Make main_loop_wait() return void Paolo Bonzini
2017-07-05 7:14 ` [Qemu-devel] [PULL 18/42] checkpatch: should not use signal except for SIG_DFL or SIG_IGN Paolo Bonzini
2017-07-05 7:14 ` [Qemu-devel] [PULL 19/42] virtio-scsi: finalize IOMMU support Paolo Bonzini
2017-07-05 7:14 ` [Qemu-devel] [PULL 20/42] qemu-thread: Assert locks are initialized before using Paolo Bonzini
2017-07-05 7:14 ` [Qemu-devel] [PULL 21/42] qemu-doc: do not refer to years-old version numbers Paolo Bonzini
2017-07-05 7:14 ` [Qemu-devel] [PULL 22/42] configure: factor out list of supported Xen/KVM/HAX targets Paolo Bonzini
2017-07-10 15:49 ` Peter Maydell
2017-07-10 16:14 ` Paolo Bonzini
2017-07-10 16:24 ` Peter Maydell
2017-07-10 16:28 ` Paolo Bonzini
2017-07-14 15:26 ` Philippe Mathieu-Daudé
2017-07-14 16:58 ` Paolo Bonzini
2017-07-12 0:24 ` Stefano Stabellini
2017-07-10 16:29 ` Anthony PERARD
2017-07-05 7:14 ` [Qemu-devel] [PULL 23/42] configure: early test for supported targets Paolo Bonzini
2017-07-05 7:14 ` [Qemu-devel] [PULL 24/42] configure: add --disable-tcg configure option Paolo Bonzini
2017-07-14 5:24 ` Philippe Mathieu-Daudé
2017-07-14 9:02 ` Paolo Bonzini
2017-07-14 15:33 ` Philippe Mathieu-Daudé
2017-07-05 7:14 ` [Qemu-devel] [PULL 25/42] vl: convert -tb-size to qemu_strtoul Paolo Bonzini
2017-07-05 7:14 ` [Qemu-devel] [PULL 26/42] vl: add tcg_enabled() for tcg related code Paolo Bonzini
2017-07-05 7:14 ` [Qemu-devel] [PULL 27/42] tcg: move page_size_init() function Paolo Bonzini
2017-07-05 7:14 ` [Qemu-devel] [PULL 28/42] cpu: move interrupt handling out of translate-common.c Paolo Bonzini
2017-07-05 7:14 ` [Qemu-devel] [PULL 29/42] tcg: make tcg_allowed global Paolo Bonzini
2017-07-05 7:14 ` [Qemu-devel] [PULL 30/42] monitor: disable "info jit" and "info opcount" if !TCG Paolo Bonzini
2017-07-05 7:14 ` [Qemu-devel] [PULL 31/42] vapic: use tcg_enabled Paolo Bonzini
2017-07-05 7:14 ` [Qemu-devel] [PULL 32/42] tcg: add the tcg-stub.c file into accel/stubs/ Paolo Bonzini
2017-07-05 7:14 ` [Qemu-devel] [PULL 33/42] tcg: move tb_lock out of translate-all.h Paolo Bonzini
2017-07-05 7:14 ` [Qemu-devel] [PULL 34/42] exec: elide calls to tb_lock and tb_unlock Paolo Bonzini
2017-07-05 7:14 ` [Qemu-devel] [PULL 35/42] tcg: add CONFIG_TCG guards in headers Paolo Bonzini
2017-07-05 7:14 ` [Qemu-devel] [PULL 36/42] tcg: add the CONFIG_TCG into Makefiles Paolo Bonzini
2017-07-05 7:14 ` [Qemu-devel] [PULL 37/42] target/i386: move cpu_sync_bndcs_hflags() function Paolo Bonzini
2017-07-05 7:14 ` [Qemu-devel] [PULL 38/42] target/i386: make cpu_get_fp80()/cpu_set_fp80() static Paolo Bonzini
2017-07-05 7:14 ` [Qemu-devel] [PULL 39/42] target/i386: split cpu_set_mxcsr() and make cpu_set_fpuc() inline Paolo Bonzini
2017-07-05 7:14 ` [Qemu-devel] [PULL 40/42] target/i386: move TLB refill function out of helper.c Paolo Bonzini
2017-07-05 7:14 ` [Qemu-devel] [PULL 41/42] target/i386: add the tcg_enabled() in target/i386/ Paolo Bonzini
2017-07-05 7:14 ` [Qemu-devel] [PULL 42/42] target/i386: add the CONFIG_TCG into Makefiles Paolo Bonzini
2017-07-06 10:42 ` [Qemu-devel] [PULL 00/42] Misc changes for 2017-07-05 Peter Maydell
2017-07-06 14:01 ` no-reply
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1499238885-26161-6-git-send-email-pbonzini@redhat.com \
--to=pbonzini@redhat.com \
--cc=qemu-devel@nongnu.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).