From: Kevin Wolf <kwolf@redhat.com>
To: qemu-block@nongnu.org
Cc: kwolf@redhat.com, qemu-devel@nongnu.org
Subject: [Qemu-devel] [PULL 034/100] backup: Switch BackupBlockJob to byte-based
Date: Fri, 7 Jul 2017 19:07:49 +0200 [thread overview]
Message-ID: <1499447335-6125-35-git-send-email-kwolf@redhat.com> (raw)
In-Reply-To: <1499447335-6125-1-git-send-email-kwolf@redhat.com>
From: Eric Blake <eblake@redhat.com>
We are gradually converting to byte-based interfaces, as they are
easier to reason about than sector-based. Continue by converting an
internal structure (no semantic change), and all references to
tracking progress. Drop a redundant local variable bytes_per_cluster.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Reviewed-by: Jeff Cody <jcody@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
---
block/backup.c | 33 +++++++++++++++------------------
1 file changed, 15 insertions(+), 18 deletions(-)
diff --git a/block/backup.c b/block/backup.c
index 06431ac..4e64710 100644
--- a/block/backup.c
+++ b/block/backup.c
@@ -39,7 +39,7 @@ typedef struct BackupBlockJob {
BlockdevOnError on_source_error;
BlockdevOnError on_target_error;
CoRwlock flush_rwlock;
- uint64_t sectors_read;
+ uint64_t bytes_read;
unsigned long *done_bitmap;
int64_t cluster_size;
bool compress;
@@ -102,16 +102,15 @@ static int coroutine_fn backup_do_cow(BackupBlockJob *job,
void *bounce_buffer = NULL;
int ret = 0;
int64_t sectors_per_cluster = cluster_size_sectors(job);
- int64_t bytes_per_cluster = sectors_per_cluster * BDRV_SECTOR_SIZE;
- int64_t start, end;
- int n;
+ int64_t start, end; /* clusters */
+ int n; /* bytes */
qemu_co_rwlock_rdlock(&job->flush_rwlock);
start = sector_num / sectors_per_cluster;
end = DIV_ROUND_UP(sector_num + nb_sectors, sectors_per_cluster);
- trace_backup_do_cow_enter(job, start * bytes_per_cluster,
+ trace_backup_do_cow_enter(job, start * job->cluster_size,
sector_num * BDRV_SECTOR_SIZE,
nb_sectors * BDRV_SECTOR_SIZE);
@@ -120,28 +119,27 @@ static int coroutine_fn backup_do_cow(BackupBlockJob *job,
for (; start < end; start++) {
if (test_bit(start, job->done_bitmap)) {
- trace_backup_do_cow_skip(job, start * bytes_per_cluster);
+ trace_backup_do_cow_skip(job, start * job->cluster_size);
continue; /* already copied */
}
- trace_backup_do_cow_process(job, start * bytes_per_cluster);
+ trace_backup_do_cow_process(job, start * job->cluster_size);
- n = MIN(sectors_per_cluster,
- job->common.len / BDRV_SECTOR_SIZE -
- start * sectors_per_cluster);
+ n = MIN(job->cluster_size,
+ job->common.len - start * job->cluster_size);
if (!bounce_buffer) {
bounce_buffer = blk_blockalign(blk, job->cluster_size);
}
iov.iov_base = bounce_buffer;
- iov.iov_len = n * BDRV_SECTOR_SIZE;
+ iov.iov_len = n;
qemu_iovec_init_external(&bounce_qiov, &iov, 1);
ret = blk_co_preadv(blk, start * job->cluster_size,
bounce_qiov.size, &bounce_qiov,
is_write_notifier ? BDRV_REQ_NO_SERIALISING : 0);
if (ret < 0) {
- trace_backup_do_cow_read_fail(job, start * bytes_per_cluster, ret);
+ trace_backup_do_cow_read_fail(job, start * job->cluster_size, ret);
if (error_is_read) {
*error_is_read = true;
}
@@ -157,7 +155,7 @@ static int coroutine_fn backup_do_cow(BackupBlockJob *job,
job->compress ? BDRV_REQ_WRITE_COMPRESSED : 0);
}
if (ret < 0) {
- trace_backup_do_cow_write_fail(job, start * bytes_per_cluster, ret);
+ trace_backup_do_cow_write_fail(job, start * job->cluster_size, ret);
if (error_is_read) {
*error_is_read = false;
}
@@ -169,8 +167,8 @@ static int coroutine_fn backup_do_cow(BackupBlockJob *job,
/* Publish progress, guest I/O counts as progress too. Note that the
* offset field is an opaque progress value, it is not a disk offset.
*/
- job->sectors_read += n;
- job->common.offset += n * BDRV_SECTOR_SIZE;
+ job->bytes_read += n;
+ job->common.offset += n;
}
out:
@@ -363,9 +361,8 @@ static bool coroutine_fn yield_and_check(BackupBlockJob *job)
*/
if (job->common.speed) {
uint64_t delay_ns = ratelimit_calculate_delay(&job->limit,
- job->sectors_read *
- BDRV_SECTOR_SIZE);
- job->sectors_read = 0;
+ job->bytes_read);
+ job->bytes_read = 0;
block_job_sleep_ns(&job->common, QEMU_CLOCK_REALTIME, delay_ns);
} else {
block_job_sleep_ns(&job->common, QEMU_CLOCK_REALTIME, 0);
--
1.8.3.1
next prev parent reply other threads:[~2017-07-07 17:10 UTC|newest]
Thread overview: 104+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-07-07 17:07 [Qemu-devel] [PULL 000/100] Block layer patches Kevin Wolf
2017-07-07 17:07 ` [Qemu-devel] [PULL 001/100] qemu-io: Don't die on second open Kevin Wolf
2017-07-07 17:07 ` [Qemu-devel] [PULL 002/100] block: Guarantee that *file is set on bdrv_get_block_status() Kevin Wolf
2017-07-07 17:07 ` [Qemu-devel] [PULL 003/100] block: Simplify use of BDRV_BLOCK_RAW Kevin Wolf
2017-07-07 17:07 ` [Qemu-devel] [PULL 004/100] blkdebug: Support .bdrv_co_get_block_status Kevin Wolf
2017-07-07 17:07 ` [Qemu-devel] [PULL 005/100] vvfat: fix qemu-img map and qemu-img convert Kevin Wolf
2017-07-07 17:07 ` [Qemu-devel] [PULL 006/100] vvfat: replace tabs by 8 spaces Kevin Wolf
2017-07-07 17:07 ` [Qemu-devel] [PULL 007/100] vvfat: fix typos Kevin Wolf
2017-07-07 17:07 ` [Qemu-devel] [PULL 008/100] vvfat: rename useless enumeration values Kevin Wolf
2017-07-07 17:07 ` [Qemu-devel] [PULL 009/100] vvfat: introduce offset_to_bootsector, offset_to_fat and offset_to_root_dir Kevin Wolf
2017-07-07 17:07 ` [Qemu-devel] [PULL 010/100] vvfat: fix field names in FAT12/FAT16 and FAT32 boot sectors Kevin Wolf
2017-07-07 17:07 ` [Qemu-devel] [PULL 011/100] vvfat: always create . and .. entries at first and in that order Kevin Wolf
2017-07-07 17:07 ` [Qemu-devel] [PULL 012/100] vvfat: correctly create long names for non-ASCII filenames Kevin Wolf
2017-07-07 17:07 ` [Qemu-devel] [PULL 013/100] vvfat: correctly create base short " Kevin Wolf
2017-07-07 17:07 ` [Qemu-devel] [PULL 014/100] vvfat: correctly generate numeric-tail of short file names Kevin Wolf
2017-07-07 17:07 ` [Qemu-devel] [PULL 015/100] vvfat: limit number of entries in root directory in FAT12/FAT16 Kevin Wolf
2017-07-07 17:07 ` [Qemu-devel] [PULL 016/100] vvfat: handle KANJI lead byte 0xe5 Kevin Wolf
2017-07-07 17:07 ` [Qemu-devel] [PULL 017/100] vvfat: change OEM name to 'MSWIN4.1' Kevin Wolf
2017-07-07 17:07 ` [Qemu-devel] [PULL 018/100] qemu-img: drop -e and -6 options from the 'create' & 'convert' commands Kevin Wolf
2017-07-07 17:07 ` [Qemu-devel] [PULL 019/100] blockdev: Print a warning for legacy drive options that belong to -device Kevin Wolf
2017-07-07 17:07 ` [Qemu-devel] [PULL 020/100] blockjob: Track job ratelimits via bytes, not sectors Kevin Wolf
2017-07-07 17:07 ` [Qemu-devel] [PULL 021/100] trace: Show blockjob actions " Kevin Wolf
2017-07-07 17:07 ` [Qemu-devel] [PULL 022/100] stream: Switch stream_populate() to byte-based Kevin Wolf
2017-07-07 17:07 ` [Qemu-devel] [PULL 023/100] stream: Drop reached_end for stream_complete() Kevin Wolf
2017-07-07 17:07 ` [Qemu-devel] [PULL 024/100] stream: Switch stream_run() to byte-based Kevin Wolf
2017-07-07 17:07 ` [Qemu-devel] [PULL 025/100] commit: Switch commit_populate() " Kevin Wolf
2017-07-07 17:07 ` [Qemu-devel] [PULL 026/100] commit: Switch commit_run() " Kevin Wolf
2017-07-07 17:07 ` [Qemu-devel] [PULL 027/100] mirror: Switch MirrorBlockJob " Kevin Wolf
2017-07-07 17:07 ` [Qemu-devel] [PULL 028/100] mirror: Switch mirror_do_zero_or_discard() " Kevin Wolf
2017-07-07 17:07 ` [Qemu-devel] [PULL 029/100] mirror: Update signature of mirror_clip_sectors() Kevin Wolf
2017-07-07 17:07 ` [Qemu-devel] [PULL 030/100] mirror: Switch mirror_cow_align() to byte-based Kevin Wolf
2017-07-07 17:07 ` [Qemu-devel] [PULL 031/100] mirror: Switch mirror_do_read() " Kevin Wolf
2017-07-07 17:07 ` [Qemu-devel] [PULL 032/100] mirror: Switch mirror_iteration() " Kevin Wolf
2017-07-07 17:07 ` [Qemu-devel] [PULL 033/100] block: Drop unused bdrv_round_sectors_to_clusters() Kevin Wolf
2017-07-07 17:07 ` Kevin Wolf [this message]
2017-07-07 17:07 ` [Qemu-devel] [PULL 035/100] backup: Switch block_backup.h to byte-based Kevin Wolf
2017-07-07 17:07 ` [Qemu-devel] [PULL 036/100] backup: Switch backup_do_cow() " Kevin Wolf
2017-07-07 17:07 ` [Qemu-devel] [PULL 037/100] backup: Switch backup_run() " Kevin Wolf
2017-07-07 17:07 ` [Qemu-devel] [PULL 038/100] block: Make bdrv_is_allocated() byte-based Kevin Wolf
2017-07-07 17:07 ` [Qemu-devel] [PULL 039/100] block: Minimize raw use of bds->total_sectors Kevin Wolf
2017-07-07 17:07 ` [Qemu-devel] [PULL 040/100] block: Make bdrv_is_allocated_above() byte-based Kevin Wolf
2017-07-07 17:07 ` [Qemu-devel] [PULL 041/100] block: expose crypto option names / defs to other drivers Kevin Wolf
2017-07-07 17:07 ` [Qemu-devel] [PULL 042/100] block: add ability to set a prefix for opt names Kevin Wolf
2017-07-07 17:07 ` [Qemu-devel] [PULL 043/100] qcow: document another weakness of qcow AES encryption Kevin Wolf
2017-07-07 17:07 ` [Qemu-devel] [PULL 044/100] qcow: require image size to be > 1 for new images Kevin Wolf
2017-07-07 17:08 ` [Qemu-devel] [PULL 045/100] iotests: skip 042 with qcow which dosn't support zero sized images Kevin Wolf
2017-07-07 17:08 ` [Qemu-devel] [PULL 046/100] iotests: skip 048 with qcow which doesn't support resize Kevin Wolf
2017-07-07 17:08 ` [Qemu-devel] [PULL 047/100] block: deprecate "encryption=on" in favor of "encrypt.format=aes" Kevin Wolf
2017-07-07 17:08 ` [Qemu-devel] [PULL 048/100] qcow: make encrypt_sectors encrypt in place Kevin Wolf
2017-07-07 17:08 ` [Qemu-devel] [PULL 049/100] qcow: convert QCow to use QCryptoBlock for encryption Kevin Wolf
2017-07-07 17:08 ` [Qemu-devel] [PULL 050/100] qcow2: make qcow2_encrypt_sectors encrypt in place Kevin Wolf
2017-07-07 17:08 ` [Qemu-devel] [PULL 051/100] qcow2: convert QCow2 to use QCryptoBlock for encryption Kevin Wolf
2017-07-07 17:08 ` [Qemu-devel] [PULL 052/100] qcow2: extend specification to cover LUKS encryption Kevin Wolf
2017-07-07 17:08 ` [Qemu-devel] [PULL 053/100] qcow2: add support for LUKS encryption format Kevin Wolf
2017-07-07 17:08 ` [Qemu-devel] [PULL 054/100] qcow2: add iotests to cover LUKS encryption support Kevin Wolf
2017-07-07 17:08 ` [Qemu-devel] [PULL 055/100] iotests: enable tests 134 and 158 to work with qcow (v1) Kevin Wolf
2017-07-07 17:08 ` [Qemu-devel] [PULL 056/100] block: rip out all traces of password prompting Kevin Wolf
2017-07-07 17:08 ` [Qemu-devel] [PULL 057/100] block: remove all encryption handling APIs Kevin Wolf
2017-07-07 17:08 ` [Qemu-devel] [PULL 058/100] block: pass option prefix down to crypto layer Kevin Wolf
2017-07-07 17:08 ` [Qemu-devel] [PULL 059/100] qcow2: report encryption specific image information Kevin Wolf
2017-07-07 17:08 ` [Qemu-devel] [PULL 060/100] docs: document encryption options for qcow, qcow2 and luks Kevin Wolf
2017-07-07 17:08 ` [Qemu-devel] [PULL 061/100] iotests: 181 does not work for all formats Kevin Wolf
2017-07-07 17:08 ` [Qemu-devel] [PULL 062/100] mirror: Fix inconsistent backing AioContext for after mirroring Kevin Wolf
2017-07-07 17:08 ` [Qemu-devel] [PULL 063/100] specs/qcow2: fix bitmap granularity qemu-specific note Kevin Wolf
2017-07-07 17:08 ` [Qemu-devel] [PULL 064/100] specs/qcow2: do not use wording 'bitmap header' Kevin Wolf
2017-07-07 17:08 ` [Qemu-devel] [PULL 065/100] hbitmap: improve dirty iter Kevin Wolf
2017-07-07 17:08 ` [Qemu-devel] [PULL 066/100] tests: add hbitmap iter test Kevin Wolf
2017-07-07 17:08 ` [Qemu-devel] [PULL 067/100] block: fix bdrv_dirty_bitmap_granularity signature Kevin Wolf
2017-07-07 17:08 ` [Qemu-devel] [PULL 068/100] block/dirty-bitmap: add deserialize_ones func Kevin Wolf
2017-07-07 17:08 ` [Qemu-devel] [PULL 069/100] qcow2-refcount: rename inc_refcounts() and make it public Kevin Wolf
2017-07-07 17:08 ` [Qemu-devel] [PULL 070/100] qcow2: add bitmaps extension Kevin Wolf
2017-07-07 17:08 ` [Qemu-devel] [PULL 071/100] block/dirty-bitmap: fix comment for BlockDirtyBitmap.disabled field Kevin Wolf
2017-07-07 17:08 ` [Qemu-devel] [PULL 072/100] block/dirty-bitmap: add readonly field to BdrvDirtyBitmap Kevin Wolf
2017-07-07 17:08 ` [Qemu-devel] [PULL 073/100] qcow2: autoloading dirty bitmaps Kevin Wolf
2017-07-07 17:08 ` [Qemu-devel] [PULL 074/100] block: refactor bdrv_reopen_commit Kevin Wolf
2017-07-07 17:08 ` [Qemu-devel] [PULL 075/100] block: new bdrv_reopen_bitmaps_rw interface Kevin Wolf
2017-07-07 17:08 ` [Qemu-devel] [PULL 076/100] qcow2: support .bdrv_reopen_bitmaps_rw Kevin Wolf
2017-07-07 17:08 ` [Qemu-devel] [PULL 077/100] block/dirty-bitmap: add autoload field to BdrvDirtyBitmap Kevin Wolf
2017-07-07 17:08 ` [Qemu-devel] [PULL 078/100] block: bdrv_close: release bitmaps after drv->bdrv_close Kevin Wolf
2017-07-07 17:08 ` [Qemu-devel] [PULL 079/100] block: introduce persistent dirty bitmaps Kevin Wolf
2017-07-07 17:08 ` [Qemu-devel] [PULL 080/100] block/dirty-bitmap: add bdrv_dirty_bitmap_next() Kevin Wolf
2017-07-07 17:08 ` [Qemu-devel] [PULL 081/100] qcow2: add persistent dirty bitmaps support Kevin Wolf
2017-07-07 17:08 ` [Qemu-devel] [PULL 082/100] qcow2: store bitmaps on reopening image as read-only Kevin Wolf
2017-07-07 17:08 ` [Qemu-devel] [PULL 083/100] block: add bdrv_can_store_new_dirty_bitmap Kevin Wolf
2017-07-07 17:08 ` [Qemu-devel] [PULL 084/100] qcow2: add .bdrv_can_store_new_dirty_bitmap Kevin Wolf
2017-07-07 17:08 ` [Qemu-devel] [PULL 085/100] qmp: add persistent flag to block-dirty-bitmap-add Kevin Wolf
2017-07-07 17:08 ` [Qemu-devel] [PULL 086/100] qmp: add autoload parameter " Kevin Wolf
2017-07-07 17:08 ` [Qemu-devel] [PULL 087/100] qmp: add x-debug-block-dirty-bitmap-sha256 Kevin Wolf
2017-07-07 17:08 ` [Qemu-devel] [PULL 088/100] iotests: test qcow2 persistent dirty bitmap Kevin Wolf
2017-07-07 17:08 ` [Qemu-devel] [PULL 089/100] block/dirty-bitmap: add bdrv_remove_persistent_dirty_bitmap Kevin Wolf
2017-07-07 17:08 ` [Qemu-devel] [PULL 090/100] qcow2: add .bdrv_remove_persistent_dirty_bitmap Kevin Wolf
2017-07-07 17:08 ` [Qemu-devel] [PULL 091/100] qmp: block-dirty-bitmap-remove: remove persistent Kevin Wolf
2017-07-07 17:08 ` [Qemu-devel] [PULL 092/100] block: release persistent bitmaps on inactivate Kevin Wolf
2017-07-07 17:08 ` [Qemu-devel] [PULL 093/100] iotests: skip 159 & 170 with luks format Kevin Wolf
2017-07-07 17:08 ` [Qemu-devel] [PULL 094/100] iotests: fix remainining tests to work with LUKS Kevin Wolf
2017-07-07 17:08 ` [Qemu-devel] [PULL 095/100] iotests: reduce PBKDF iterations when testing LUKS Kevin Wolf
2017-07-07 17:08 ` [Qemu-devel] [PULL 096/100] iotests: add more LUKS hash combination tests Kevin Wolf
2017-07-07 17:08 ` [Qemu-devel] [PULL 097/100] iotests: chown LUKS device before qemu-io launches Kevin Wolf
2017-07-07 17:08 ` [Qemu-devel] [PULL 098/100] iotests: Use absolute paths for executables Kevin Wolf
2017-07-07 17:08 ` [Qemu-devel] [PULL 099/100] iotests: Add test for colon handling Kevin Wolf
2017-07-07 17:08 ` [Qemu-devel] [PULL 100/100] tests: Avoid non-portable 'echo -ARG' Kevin Wolf
2017-07-10 9:28 ` [Qemu-devel] [PULL 000/100] Block layer patches Peter Maydell
2017-07-10 11:16 ` Kevin Wolf
2017-07-11 14:35 ` [Qemu-devel] [Qemu-block] " Max Reitz
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1499447335-6125-35-git-send-email-kwolf@redhat.com \
--to=kwolf@redhat.com \
--cc=qemu-block@nongnu.org \
--cc=qemu-devel@nongnu.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).