From: Kevin Wolf <kwolf@redhat.com>
To: qemu-block@nongnu.org
Cc: kwolf@redhat.com, qemu-devel@nongnu.org
Subject: [Qemu-devel] [PULL 036/100] backup: Switch backup_do_cow() to byte-based
Date: Fri, 7 Jul 2017 19:07:51 +0200 [thread overview]
Message-ID: <1499447335-6125-37-git-send-email-kwolf@redhat.com> (raw)
In-Reply-To: <1499447335-6125-1-git-send-email-kwolf@redhat.com>
From: Eric Blake <eblake@redhat.com>
We are gradually converting to byte-based interfaces, as they are
easier to reason about than sector-based. Convert another internal
function (no semantic change).
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Reviewed-by: Jeff Cody <jcody@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
---
block/backup.c | 62 ++++++++++++++++++++++++----------------------------------
1 file changed, 26 insertions(+), 36 deletions(-)
diff --git a/block/backup.c b/block/backup.c
index 503fbec..f7e14db 100644
--- a/block/backup.c
+++ b/block/backup.c
@@ -91,7 +91,7 @@ static void cow_request_end(CowRequest *req)
}
static int coroutine_fn backup_do_cow(BackupBlockJob *job,
- int64_t sector_num, int nb_sectors,
+ int64_t offset, uint64_t bytes,
bool *error_is_read,
bool is_write_notifier)
{
@@ -101,34 +101,28 @@ static int coroutine_fn backup_do_cow(BackupBlockJob *job,
QEMUIOVector bounce_qiov;
void *bounce_buffer = NULL;
int ret = 0;
- int64_t sectors_per_cluster = cluster_size_sectors(job);
- int64_t start, end; /* clusters */
+ int64_t start, end; /* bytes */
int n; /* bytes */
qemu_co_rwlock_rdlock(&job->flush_rwlock);
- start = sector_num / sectors_per_cluster;
- end = DIV_ROUND_UP(sector_num + nb_sectors, sectors_per_cluster);
+ start = QEMU_ALIGN_DOWN(offset, job->cluster_size);
+ end = QEMU_ALIGN_UP(bytes + offset, job->cluster_size);
- trace_backup_do_cow_enter(job, start * job->cluster_size,
- sector_num * BDRV_SECTOR_SIZE,
- nb_sectors * BDRV_SECTOR_SIZE);
+ trace_backup_do_cow_enter(job, start, offset, bytes);
- wait_for_overlapping_requests(job, start * job->cluster_size,
- end * job->cluster_size);
- cow_request_begin(&cow_request, job, start * job->cluster_size,
- end * job->cluster_size);
+ wait_for_overlapping_requests(job, start, end);
+ cow_request_begin(&cow_request, job, start, end);
- for (; start < end; start++) {
- if (test_bit(start, job->done_bitmap)) {
- trace_backup_do_cow_skip(job, start * job->cluster_size);
+ for (; start < end; start += job->cluster_size) {
+ if (test_bit(start / job->cluster_size, job->done_bitmap)) {
+ trace_backup_do_cow_skip(job, start);
continue; /* already copied */
}
- trace_backup_do_cow_process(job, start * job->cluster_size);
+ trace_backup_do_cow_process(job, start);
- n = MIN(job->cluster_size,
- job->common.len - start * job->cluster_size);
+ n = MIN(job->cluster_size, job->common.len - start);
if (!bounce_buffer) {
bounce_buffer = blk_blockalign(blk, job->cluster_size);
@@ -137,11 +131,10 @@ static int coroutine_fn backup_do_cow(BackupBlockJob *job,
iov.iov_len = n;
qemu_iovec_init_external(&bounce_qiov, &iov, 1);
- ret = blk_co_preadv(blk, start * job->cluster_size,
- bounce_qiov.size, &bounce_qiov,
+ ret = blk_co_preadv(blk, start, bounce_qiov.size, &bounce_qiov,
is_write_notifier ? BDRV_REQ_NO_SERIALISING : 0);
if (ret < 0) {
- trace_backup_do_cow_read_fail(job, start * job->cluster_size, ret);
+ trace_backup_do_cow_read_fail(job, start, ret);
if (error_is_read) {
*error_is_read = true;
}
@@ -149,22 +142,22 @@ static int coroutine_fn backup_do_cow(BackupBlockJob *job,
}
if (buffer_is_zero(iov.iov_base, iov.iov_len)) {
- ret = blk_co_pwrite_zeroes(job->target, start * job->cluster_size,
+ ret = blk_co_pwrite_zeroes(job->target, start,
bounce_qiov.size, BDRV_REQ_MAY_UNMAP);
} else {
- ret = blk_co_pwritev(job->target, start * job->cluster_size,
+ ret = blk_co_pwritev(job->target, start,
bounce_qiov.size, &bounce_qiov,
job->compress ? BDRV_REQ_WRITE_COMPRESSED : 0);
}
if (ret < 0) {
- trace_backup_do_cow_write_fail(job, start * job->cluster_size, ret);
+ trace_backup_do_cow_write_fail(job, start, ret);
if (error_is_read) {
*error_is_read = false;
}
goto out;
}
- set_bit(start, job->done_bitmap);
+ set_bit(start / job->cluster_size, job->done_bitmap);
/* Publish progress, guest I/O counts as progress too. Note that the
* offset field is an opaque progress value, it is not a disk offset.
@@ -180,8 +173,7 @@ out:
cow_request_end(&cow_request);
- trace_backup_do_cow_return(job, sector_num * BDRV_SECTOR_SIZE,
- nb_sectors * BDRV_SECTOR_SIZE, ret);
+ trace_backup_do_cow_return(job, offset, bytes, ret);
qemu_co_rwlock_unlock(&job->flush_rwlock);
@@ -194,14 +186,12 @@ static int coroutine_fn backup_before_write_notify(
{
BackupBlockJob *job = container_of(notifier, BackupBlockJob, before_write);
BdrvTrackedRequest *req = opaque;
- int64_t sector_num = req->offset >> BDRV_SECTOR_BITS;
- int nb_sectors = req->bytes >> BDRV_SECTOR_BITS;
assert(req->bs == blk_bs(job->common.blk));
- assert((req->offset & (BDRV_SECTOR_SIZE - 1)) == 0);
- assert((req->bytes & (BDRV_SECTOR_SIZE - 1)) == 0);
+ assert(QEMU_IS_ALIGNED(req->offset, BDRV_SECTOR_SIZE));
+ assert(QEMU_IS_ALIGNED(req->bytes, BDRV_SECTOR_SIZE));
- return backup_do_cow(job, sector_num, nb_sectors, NULL, true);
+ return backup_do_cow(job, req->offset, req->bytes, NULL, true);
}
static void backup_set_speed(BlockJob *job, int64_t speed, Error **errp)
@@ -406,8 +396,8 @@ static int coroutine_fn backup_run_incremental(BackupBlockJob *job)
if (yield_and_check(job)) {
goto out;
}
- ret = backup_do_cow(job, cluster * sectors_per_cluster,
- sectors_per_cluster, &error_is_read,
+ ret = backup_do_cow(job, cluster * job->cluster_size,
+ job->cluster_size, &error_is_read,
false);
if ((ret < 0) &&
backup_error_action(job, error_is_read, -ret) ==
@@ -509,8 +499,8 @@ static void coroutine_fn backup_run(void *opaque)
if (alloced < 0) {
ret = alloced;
} else {
- ret = backup_do_cow(job, start * sectors_per_cluster,
- sectors_per_cluster, &error_is_read,
+ ret = backup_do_cow(job, start * job->cluster_size,
+ job->cluster_size, &error_is_read,
false);
}
if (ret < 0) {
--
1.8.3.1
next prev parent reply other threads:[~2017-07-07 17:10 UTC|newest]
Thread overview: 104+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-07-07 17:07 [Qemu-devel] [PULL 000/100] Block layer patches Kevin Wolf
2017-07-07 17:07 ` [Qemu-devel] [PULL 001/100] qemu-io: Don't die on second open Kevin Wolf
2017-07-07 17:07 ` [Qemu-devel] [PULL 002/100] block: Guarantee that *file is set on bdrv_get_block_status() Kevin Wolf
2017-07-07 17:07 ` [Qemu-devel] [PULL 003/100] block: Simplify use of BDRV_BLOCK_RAW Kevin Wolf
2017-07-07 17:07 ` [Qemu-devel] [PULL 004/100] blkdebug: Support .bdrv_co_get_block_status Kevin Wolf
2017-07-07 17:07 ` [Qemu-devel] [PULL 005/100] vvfat: fix qemu-img map and qemu-img convert Kevin Wolf
2017-07-07 17:07 ` [Qemu-devel] [PULL 006/100] vvfat: replace tabs by 8 spaces Kevin Wolf
2017-07-07 17:07 ` [Qemu-devel] [PULL 007/100] vvfat: fix typos Kevin Wolf
2017-07-07 17:07 ` [Qemu-devel] [PULL 008/100] vvfat: rename useless enumeration values Kevin Wolf
2017-07-07 17:07 ` [Qemu-devel] [PULL 009/100] vvfat: introduce offset_to_bootsector, offset_to_fat and offset_to_root_dir Kevin Wolf
2017-07-07 17:07 ` [Qemu-devel] [PULL 010/100] vvfat: fix field names in FAT12/FAT16 and FAT32 boot sectors Kevin Wolf
2017-07-07 17:07 ` [Qemu-devel] [PULL 011/100] vvfat: always create . and .. entries at first and in that order Kevin Wolf
2017-07-07 17:07 ` [Qemu-devel] [PULL 012/100] vvfat: correctly create long names for non-ASCII filenames Kevin Wolf
2017-07-07 17:07 ` [Qemu-devel] [PULL 013/100] vvfat: correctly create base short " Kevin Wolf
2017-07-07 17:07 ` [Qemu-devel] [PULL 014/100] vvfat: correctly generate numeric-tail of short file names Kevin Wolf
2017-07-07 17:07 ` [Qemu-devel] [PULL 015/100] vvfat: limit number of entries in root directory in FAT12/FAT16 Kevin Wolf
2017-07-07 17:07 ` [Qemu-devel] [PULL 016/100] vvfat: handle KANJI lead byte 0xe5 Kevin Wolf
2017-07-07 17:07 ` [Qemu-devel] [PULL 017/100] vvfat: change OEM name to 'MSWIN4.1' Kevin Wolf
2017-07-07 17:07 ` [Qemu-devel] [PULL 018/100] qemu-img: drop -e and -6 options from the 'create' & 'convert' commands Kevin Wolf
2017-07-07 17:07 ` [Qemu-devel] [PULL 019/100] blockdev: Print a warning for legacy drive options that belong to -device Kevin Wolf
2017-07-07 17:07 ` [Qemu-devel] [PULL 020/100] blockjob: Track job ratelimits via bytes, not sectors Kevin Wolf
2017-07-07 17:07 ` [Qemu-devel] [PULL 021/100] trace: Show blockjob actions " Kevin Wolf
2017-07-07 17:07 ` [Qemu-devel] [PULL 022/100] stream: Switch stream_populate() to byte-based Kevin Wolf
2017-07-07 17:07 ` [Qemu-devel] [PULL 023/100] stream: Drop reached_end for stream_complete() Kevin Wolf
2017-07-07 17:07 ` [Qemu-devel] [PULL 024/100] stream: Switch stream_run() to byte-based Kevin Wolf
2017-07-07 17:07 ` [Qemu-devel] [PULL 025/100] commit: Switch commit_populate() " Kevin Wolf
2017-07-07 17:07 ` [Qemu-devel] [PULL 026/100] commit: Switch commit_run() " Kevin Wolf
2017-07-07 17:07 ` [Qemu-devel] [PULL 027/100] mirror: Switch MirrorBlockJob " Kevin Wolf
2017-07-07 17:07 ` [Qemu-devel] [PULL 028/100] mirror: Switch mirror_do_zero_or_discard() " Kevin Wolf
2017-07-07 17:07 ` [Qemu-devel] [PULL 029/100] mirror: Update signature of mirror_clip_sectors() Kevin Wolf
2017-07-07 17:07 ` [Qemu-devel] [PULL 030/100] mirror: Switch mirror_cow_align() to byte-based Kevin Wolf
2017-07-07 17:07 ` [Qemu-devel] [PULL 031/100] mirror: Switch mirror_do_read() " Kevin Wolf
2017-07-07 17:07 ` [Qemu-devel] [PULL 032/100] mirror: Switch mirror_iteration() " Kevin Wolf
2017-07-07 17:07 ` [Qemu-devel] [PULL 033/100] block: Drop unused bdrv_round_sectors_to_clusters() Kevin Wolf
2017-07-07 17:07 ` [Qemu-devel] [PULL 034/100] backup: Switch BackupBlockJob to byte-based Kevin Wolf
2017-07-07 17:07 ` [Qemu-devel] [PULL 035/100] backup: Switch block_backup.h " Kevin Wolf
2017-07-07 17:07 ` Kevin Wolf [this message]
2017-07-07 17:07 ` [Qemu-devel] [PULL 037/100] backup: Switch backup_run() " Kevin Wolf
2017-07-07 17:07 ` [Qemu-devel] [PULL 038/100] block: Make bdrv_is_allocated() byte-based Kevin Wolf
2017-07-07 17:07 ` [Qemu-devel] [PULL 039/100] block: Minimize raw use of bds->total_sectors Kevin Wolf
2017-07-07 17:07 ` [Qemu-devel] [PULL 040/100] block: Make bdrv_is_allocated_above() byte-based Kevin Wolf
2017-07-07 17:07 ` [Qemu-devel] [PULL 041/100] block: expose crypto option names / defs to other drivers Kevin Wolf
2017-07-07 17:07 ` [Qemu-devel] [PULL 042/100] block: add ability to set a prefix for opt names Kevin Wolf
2017-07-07 17:07 ` [Qemu-devel] [PULL 043/100] qcow: document another weakness of qcow AES encryption Kevin Wolf
2017-07-07 17:07 ` [Qemu-devel] [PULL 044/100] qcow: require image size to be > 1 for new images Kevin Wolf
2017-07-07 17:08 ` [Qemu-devel] [PULL 045/100] iotests: skip 042 with qcow which dosn't support zero sized images Kevin Wolf
2017-07-07 17:08 ` [Qemu-devel] [PULL 046/100] iotests: skip 048 with qcow which doesn't support resize Kevin Wolf
2017-07-07 17:08 ` [Qemu-devel] [PULL 047/100] block: deprecate "encryption=on" in favor of "encrypt.format=aes" Kevin Wolf
2017-07-07 17:08 ` [Qemu-devel] [PULL 048/100] qcow: make encrypt_sectors encrypt in place Kevin Wolf
2017-07-07 17:08 ` [Qemu-devel] [PULL 049/100] qcow: convert QCow to use QCryptoBlock for encryption Kevin Wolf
2017-07-07 17:08 ` [Qemu-devel] [PULL 050/100] qcow2: make qcow2_encrypt_sectors encrypt in place Kevin Wolf
2017-07-07 17:08 ` [Qemu-devel] [PULL 051/100] qcow2: convert QCow2 to use QCryptoBlock for encryption Kevin Wolf
2017-07-07 17:08 ` [Qemu-devel] [PULL 052/100] qcow2: extend specification to cover LUKS encryption Kevin Wolf
2017-07-07 17:08 ` [Qemu-devel] [PULL 053/100] qcow2: add support for LUKS encryption format Kevin Wolf
2017-07-07 17:08 ` [Qemu-devel] [PULL 054/100] qcow2: add iotests to cover LUKS encryption support Kevin Wolf
2017-07-07 17:08 ` [Qemu-devel] [PULL 055/100] iotests: enable tests 134 and 158 to work with qcow (v1) Kevin Wolf
2017-07-07 17:08 ` [Qemu-devel] [PULL 056/100] block: rip out all traces of password prompting Kevin Wolf
2017-07-07 17:08 ` [Qemu-devel] [PULL 057/100] block: remove all encryption handling APIs Kevin Wolf
2017-07-07 17:08 ` [Qemu-devel] [PULL 058/100] block: pass option prefix down to crypto layer Kevin Wolf
2017-07-07 17:08 ` [Qemu-devel] [PULL 059/100] qcow2: report encryption specific image information Kevin Wolf
2017-07-07 17:08 ` [Qemu-devel] [PULL 060/100] docs: document encryption options for qcow, qcow2 and luks Kevin Wolf
2017-07-07 17:08 ` [Qemu-devel] [PULL 061/100] iotests: 181 does not work for all formats Kevin Wolf
2017-07-07 17:08 ` [Qemu-devel] [PULL 062/100] mirror: Fix inconsistent backing AioContext for after mirroring Kevin Wolf
2017-07-07 17:08 ` [Qemu-devel] [PULL 063/100] specs/qcow2: fix bitmap granularity qemu-specific note Kevin Wolf
2017-07-07 17:08 ` [Qemu-devel] [PULL 064/100] specs/qcow2: do not use wording 'bitmap header' Kevin Wolf
2017-07-07 17:08 ` [Qemu-devel] [PULL 065/100] hbitmap: improve dirty iter Kevin Wolf
2017-07-07 17:08 ` [Qemu-devel] [PULL 066/100] tests: add hbitmap iter test Kevin Wolf
2017-07-07 17:08 ` [Qemu-devel] [PULL 067/100] block: fix bdrv_dirty_bitmap_granularity signature Kevin Wolf
2017-07-07 17:08 ` [Qemu-devel] [PULL 068/100] block/dirty-bitmap: add deserialize_ones func Kevin Wolf
2017-07-07 17:08 ` [Qemu-devel] [PULL 069/100] qcow2-refcount: rename inc_refcounts() and make it public Kevin Wolf
2017-07-07 17:08 ` [Qemu-devel] [PULL 070/100] qcow2: add bitmaps extension Kevin Wolf
2017-07-07 17:08 ` [Qemu-devel] [PULL 071/100] block/dirty-bitmap: fix comment for BlockDirtyBitmap.disabled field Kevin Wolf
2017-07-07 17:08 ` [Qemu-devel] [PULL 072/100] block/dirty-bitmap: add readonly field to BdrvDirtyBitmap Kevin Wolf
2017-07-07 17:08 ` [Qemu-devel] [PULL 073/100] qcow2: autoloading dirty bitmaps Kevin Wolf
2017-07-07 17:08 ` [Qemu-devel] [PULL 074/100] block: refactor bdrv_reopen_commit Kevin Wolf
2017-07-07 17:08 ` [Qemu-devel] [PULL 075/100] block: new bdrv_reopen_bitmaps_rw interface Kevin Wolf
2017-07-07 17:08 ` [Qemu-devel] [PULL 076/100] qcow2: support .bdrv_reopen_bitmaps_rw Kevin Wolf
2017-07-07 17:08 ` [Qemu-devel] [PULL 077/100] block/dirty-bitmap: add autoload field to BdrvDirtyBitmap Kevin Wolf
2017-07-07 17:08 ` [Qemu-devel] [PULL 078/100] block: bdrv_close: release bitmaps after drv->bdrv_close Kevin Wolf
2017-07-07 17:08 ` [Qemu-devel] [PULL 079/100] block: introduce persistent dirty bitmaps Kevin Wolf
2017-07-07 17:08 ` [Qemu-devel] [PULL 080/100] block/dirty-bitmap: add bdrv_dirty_bitmap_next() Kevin Wolf
2017-07-07 17:08 ` [Qemu-devel] [PULL 081/100] qcow2: add persistent dirty bitmaps support Kevin Wolf
2017-07-07 17:08 ` [Qemu-devel] [PULL 082/100] qcow2: store bitmaps on reopening image as read-only Kevin Wolf
2017-07-07 17:08 ` [Qemu-devel] [PULL 083/100] block: add bdrv_can_store_new_dirty_bitmap Kevin Wolf
2017-07-07 17:08 ` [Qemu-devel] [PULL 084/100] qcow2: add .bdrv_can_store_new_dirty_bitmap Kevin Wolf
2017-07-07 17:08 ` [Qemu-devel] [PULL 085/100] qmp: add persistent flag to block-dirty-bitmap-add Kevin Wolf
2017-07-07 17:08 ` [Qemu-devel] [PULL 086/100] qmp: add autoload parameter " Kevin Wolf
2017-07-07 17:08 ` [Qemu-devel] [PULL 087/100] qmp: add x-debug-block-dirty-bitmap-sha256 Kevin Wolf
2017-07-07 17:08 ` [Qemu-devel] [PULL 088/100] iotests: test qcow2 persistent dirty bitmap Kevin Wolf
2017-07-07 17:08 ` [Qemu-devel] [PULL 089/100] block/dirty-bitmap: add bdrv_remove_persistent_dirty_bitmap Kevin Wolf
2017-07-07 17:08 ` [Qemu-devel] [PULL 090/100] qcow2: add .bdrv_remove_persistent_dirty_bitmap Kevin Wolf
2017-07-07 17:08 ` [Qemu-devel] [PULL 091/100] qmp: block-dirty-bitmap-remove: remove persistent Kevin Wolf
2017-07-07 17:08 ` [Qemu-devel] [PULL 092/100] block: release persistent bitmaps on inactivate Kevin Wolf
2017-07-07 17:08 ` [Qemu-devel] [PULL 093/100] iotests: skip 159 & 170 with luks format Kevin Wolf
2017-07-07 17:08 ` [Qemu-devel] [PULL 094/100] iotests: fix remainining tests to work with LUKS Kevin Wolf
2017-07-07 17:08 ` [Qemu-devel] [PULL 095/100] iotests: reduce PBKDF iterations when testing LUKS Kevin Wolf
2017-07-07 17:08 ` [Qemu-devel] [PULL 096/100] iotests: add more LUKS hash combination tests Kevin Wolf
2017-07-07 17:08 ` [Qemu-devel] [PULL 097/100] iotests: chown LUKS device before qemu-io launches Kevin Wolf
2017-07-07 17:08 ` [Qemu-devel] [PULL 098/100] iotests: Use absolute paths for executables Kevin Wolf
2017-07-07 17:08 ` [Qemu-devel] [PULL 099/100] iotests: Add test for colon handling Kevin Wolf
2017-07-07 17:08 ` [Qemu-devel] [PULL 100/100] tests: Avoid non-portable 'echo -ARG' Kevin Wolf
2017-07-10 9:28 ` [Qemu-devel] [PULL 000/100] Block layer patches Peter Maydell
2017-07-10 11:16 ` Kevin Wolf
2017-07-11 14:35 ` [Qemu-devel] [Qemu-block] " Max Reitz
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1499447335-6125-37-git-send-email-kwolf@redhat.com \
--to=kwolf@redhat.com \
--cc=qemu-block@nongnu.org \
--cc=qemu-devel@nongnu.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).