From: Anton Nefedov <anton.nefedov@virtuozzo.com>
To: qemu-devel@nongnu.org
Cc: qemu-block@nongnu.org, den@virtuozzo.com, kwolf@redhat.com,
mreitz@redhat.com, eblake@redhat.com,
Anton Nefedov <anton.nefedov@virtuozzo.com>
Subject: [Qemu-devel] [PATCH v4 03/15] block: introduce BDRV_REQ_ALLOCATE flag
Date: Tue, 1 Aug 2017 17:19:00 +0300 [thread overview]
Message-ID: <1501597152-25342-4-git-send-email-anton.nefedov@virtuozzo.com> (raw)
In-Reply-To: <1501597152-25342-1-git-send-email-anton.nefedov@virtuozzo.com>
The flag is supposed to indicate that the region of the disk image has
to be sufficiently allocated so it reads as zeroes. The call with the flag
set has to return -ENOTSUP if allocation cannot be done efficiently
(i.e. without falling back to writing actual buffers)
Signed-off-by: Anton Nefedov <anton.nefedov@virtuozzo.com>
---
include/block/block.h | 6 +++++-
include/block/block_int.h | 2 +-
block/io.c | 20 +++++++++++++++++---
3 files changed, 23 insertions(+), 5 deletions(-)
diff --git a/include/block/block.h b/include/block/block.h
index 7fe0125..828da67 100644
--- a/include/block/block.h
+++ b/include/block/block.h
@@ -65,9 +65,13 @@ typedef enum {
BDRV_REQ_NO_SERIALISING = 0x8,
BDRV_REQ_FUA = 0x10,
BDRV_REQ_WRITE_COMPRESSED = 0x20,
+ /* The BDRV_REQ_ALLOCATE flag is used to indicate that the driver has to
+ * efficiently allocate the space so it reads as zeroes, or return an error.
+ */
+ BDRV_REQ_ALLOCATE = 0x40,
/* Mask of valid flags */
- BDRV_REQ_MASK = 0x3f,
+ BDRV_REQ_MASK = 0x7f,
} BdrvRequestFlags;
typedef struct BlockSizes {
diff --git a/include/block/block_int.h b/include/block/block_int.h
index 9b94b32..9b64411 100644
--- a/include/block/block_int.h
+++ b/include/block/block_int.h
@@ -585,7 +585,7 @@ struct BlockDriverState {
/* Flags honored during pwrite (so far: BDRV_REQ_FUA) */
unsigned int supported_write_flags;
/* Flags honored during pwrite_zeroes (so far: BDRV_REQ_FUA,
- * BDRV_REQ_MAY_UNMAP) */
+ * BDRV_REQ_MAY_UNMAP, BDRV_REQ_ALLOCATE) */
unsigned int supported_zero_flags;
/* the following member gives a name to every node on the bs graph. */
diff --git a/block/io.c b/block/io.c
index 375fc66..04d495e 100644
--- a/block/io.c
+++ b/block/io.c
@@ -1245,7 +1245,7 @@ static int coroutine_fn bdrv_co_do_pwrite_zeroes(BlockDriverState *bs,
assert(!bs->supported_zero_flags);
}
- if (ret == -ENOTSUP) {
+ if (ret == -ENOTSUP && !(flags & BDRV_REQ_ALLOCATE)) {
/* Fall back to bounce buffer if write zeroes is unsupported */
BdrvRequestFlags write_flags = flags & ~BDRV_REQ_ZERO_WRITE;
@@ -1331,8 +1331,8 @@ static int coroutine_fn bdrv_aligned_pwritev(BdrvChild *child,
ret = notifier_with_return_list_notify(&bs->before_write_notifiers, req);
if (!ret && bs->detect_zeroes != BLOCKDEV_DETECT_ZEROES_OPTIONS_OFF &&
- !(flags & BDRV_REQ_ZERO_WRITE) && drv->bdrv_co_pwrite_zeroes &&
- qemu_iovec_is_zero(qiov)) {
+ !(flags & BDRV_REQ_ZERO_WRITE) && !(flags & BDRV_REQ_ALLOCATE) &&
+ drv->bdrv_co_pwrite_zeroes && qemu_iovec_is_zero(qiov)) {
flags |= BDRV_REQ_ZERO_WRITE;
if (bs->detect_zeroes == BLOCKDEV_DETECT_ZEROES_OPTIONS_UNMAP) {
flags |= BDRV_REQ_MAY_UNMAP;
@@ -1410,6 +1410,9 @@ static int coroutine_fn bdrv_co_do_zero_pwritev(BdrvChild *child,
assert(flags & BDRV_REQ_ZERO_WRITE);
if (head_padding_bytes || tail_padding_bytes) {
+ if (flags & BDRV_REQ_ALLOCATE) {
+ return -ENOTSUP;
+ }
buf = qemu_blockalign(bs, align);
iov = (struct iovec) {
.iov_base = buf,
@@ -1508,6 +1511,9 @@ int coroutine_fn bdrv_co_pwritev(BdrvChild *child,
return ret;
}
+ /* allocation request with qiov provided doesn't make much sense */
+ assert(!(qiov && flags & BDRV_REQ_ALLOCATE));
+
bdrv_inc_in_flight(bs);
/*
* Align write if necessary by performing a read-modify-write cycle.
@@ -1639,6 +1645,14 @@ int coroutine_fn bdrv_co_pwrite_zeroes(BdrvChild *child, int64_t offset,
{
trace_bdrv_co_pwrite_zeroes(child->bs, offset, bytes, flags);
+ assert(!(flags & BDRV_REQ_MAY_UNMAP && flags & BDRV_REQ_ALLOCATE));
+
+ if (flags & BDRV_REQ_ALLOCATE &&
+ !(child->bs->supported_zero_flags & BDRV_REQ_ALLOCATE))
+ {
+ return -ENOTSUP;
+ }
+
if (!(child->bs->open_flags & BDRV_O_UNMAP)) {
flags &= ~BDRV_REQ_MAY_UNMAP;
}
--
2.7.4
next prev parent reply other threads:[~2017-08-01 14:19 UTC|newest]
Thread overview: 27+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-08-01 14:18 [Qemu-devel] [PATCH v4 00/15] qcow2: space preallocation and COW improvements Anton Nefedov
2017-08-01 14:18 ` [Qemu-devel] [PATCH v4 01/15] mirror: inherit supported write/zero flags Anton Nefedov
2017-08-04 15:13 ` [Qemu-devel] [PATCH v4 for-2.10 " Eric Blake
2017-08-01 14:18 ` [Qemu-devel] [PATCH v4 02/15] blkverify: set " Anton Nefedov
2017-08-04 15:23 ` Eric Blake
2017-08-07 12:19 ` Anton Nefedov
2017-08-01 14:19 ` Anton Nefedov [this message]
2017-08-04 19:51 ` [Qemu-devel] [PATCH v4 03/15] block: introduce BDRV_REQ_ALLOCATE flag Eric Blake
2017-08-29 12:47 ` [Qemu-devel] [Qemu-block] " Alberto Garcia
2017-08-01 14:19 ` [Qemu-devel] [PATCH v4 04/15] block: treat BDRV_REQ_ALLOCATE as serialising Anton Nefedov
2017-08-01 14:19 ` [Qemu-devel] [PATCH v4 05/15] file-posix: support BDRV_REQ_ALLOCATE Anton Nefedov
2017-08-29 13:00 ` [Qemu-devel] [Qemu-block] " Alberto Garcia
2017-08-01 14:19 ` [Qemu-devel] [PATCH v4 06/15] block: support BDRV_REQ_ALLOCATE in passthrough drivers Anton Nefedov
2017-08-29 13:07 ` [Qemu-devel] [Qemu-block] " Alberto Garcia
2017-08-01 14:19 ` [Qemu-devel] [PATCH v4 07/15] qcow2: preallocation at image expand Anton Nefedov
2017-08-01 14:19 ` [Qemu-devel] [PATCH v4 08/15] qcow2: set inactive flag Anton Nefedov
2017-08-04 20:00 ` Eric Blake
2017-08-07 12:06 ` Anton Nefedov
2017-08-01 14:19 ` [Qemu-devel] [PATCH v4 09/15] qcow2: truncate preallocated space Anton Nefedov
2017-08-01 14:19 ` [Qemu-devel] [PATCH v4 10/15] qcow2: check space leak at the end of the image Anton Nefedov
2017-08-01 14:19 ` [Qemu-devel] [PATCH v4 11/15] qcow2: move is_zero() up Anton Nefedov
2017-08-01 14:19 ` [Qemu-devel] [PATCH v4 12/15] qcow2: skip writing zero buffers to empty COW areas Anton Nefedov
2017-08-01 14:19 ` [Qemu-devel] [PATCH v4 13/15] qcow2: allocate image space by-cluster Anton Nefedov
2017-08-01 14:19 ` [Qemu-devel] [PATCH v4 14/15] iotest 190: test BDRV_REQ_ALLOCATE Anton Nefedov
2017-08-04 15:27 ` Eric Blake
2017-08-01 14:19 ` [Qemu-devel] [PATCH v4 15/15] iotest 134: test cluster-misaligned encrypted write Anton Nefedov
2017-09-21 17:16 ` [Qemu-devel] [PATCH v4 00/15] qcow2: space preallocation and COW improvements Anton Nefedov
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1501597152-25342-4-git-send-email-anton.nefedov@virtuozzo.com \
--to=anton.nefedov@virtuozzo.com \
--cc=den@virtuozzo.com \
--cc=eblake@redhat.com \
--cc=kwolf@redhat.com \
--cc=mreitz@redhat.com \
--cc=qemu-block@nongnu.org \
--cc=qemu-devel@nongnu.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).