From: Yi Min Zhao <zyimin@linux.vnet.ibm.com>
To: qemu-devel@nongnu.org
Cc: borntraeger@de.ibm.com, pasic@linux.vnet.ibm.com,
pmorel@linux.vnet.ibm.com, cohuck@redhat.com, agraf@suse.de,
richard.henderson@linaro.org, zyimin@linux.vnet.ibm.com
Subject: [Qemu-devel] [PATCH 2/4] s390x/pci: remove idx from msix msg data
Date: Mon, 28 Aug 2017 10:04:45 +0200 [thread overview]
Message-ID: <1503907487-2764-3-git-send-email-zyimin@linux.vnet.ibm.com> (raw)
In-Reply-To: <1503907487-2764-1-git-send-email-zyimin@linux.vnet.ibm.com>
PCIDevcie pointer has been a parameter of kvm_arch_fixup_msi_route().
So we don't need to store zpci idx in msix message data to find out the
specific zpci device. Instead, we could use pci device id to find its
corresponding zpci device.
Signed-off-by: Yi Min Zhao <zyimin@linux.vnet.ibm.com>
---
hw/s390x/s390-pci-bus.c | 16 +++++-----------
hw/s390x/s390-pci-bus.h | 2 ++
hw/s390x/s390-pci-inst.c | 24 ------------------------
target/s390x/kvm.c | 7 +++++--
4 files changed, 12 insertions(+), 37 deletions(-)
diff --git a/hw/s390x/s390-pci-bus.c b/hw/s390x/s390-pci-bus.c
index 61cfd2138f..9e1f7ff5c5 100644
--- a/hw/s390x/s390-pci-bus.c
+++ b/hw/s390x/s390-pci-bus.c
@@ -209,8 +209,8 @@ static S390PCIBusDevice *s390_pci_find_dev_by_uid(S390pciState *s, uint16_t uid)
return NULL;
}
-static S390PCIBusDevice *s390_pci_find_dev_by_target(S390pciState *s,
- const char *target)
+S390PCIBusDevice *s390_pci_find_dev_by_target(S390pciState *s,
+ const char *target)
{
S390PCIBusDevice *pbdev;
@@ -475,19 +475,13 @@ static void s390_msi_ctrl_write(void *opaque, hwaddr addr, uint64_t data,
unsigned int size)
{
S390PCIBusDevice *pbdev = opaque;
- uint32_t idx = data >> ZPCI_MSI_VEC_BITS;
uint32_t vec = data & ZPCI_MSI_VEC_MASK;
uint64_t ind_bit;
uint32_t sum_bit;
- uint32_t e = 0;
- DPRINTF("write_msix data 0x%" PRIx64 " idx %d vec 0x%x\n", data, idx, vec);
-
- if (!pbdev) {
- e |= (vec << ERR_EVENT_MVN_OFFSET);
- s390_pci_generate_error_event(ERR_EVENT_NOMSI, idx, 0, addr, e);
- return;
- }
+ assert(pbdev);
+ DPRINTF("write_msix data 0x%" PRIx64 " idx %d vec 0x%x\n", data,
+ pbdev->idx, vec);
if (pbdev->state != ZPCI_FS_ENABLED) {
return;
diff --git a/hw/s390x/s390-pci-bus.h b/hw/s390x/s390-pci-bus.h
index 67af2c12ff..820c7fa52b 100644
--- a/hw/s390x/s390-pci-bus.h
+++ b/hw/s390x/s390-pci-bus.h
@@ -330,6 +330,8 @@ void s390_pci_generate_error_event(uint16_t pec, uint32_t fh, uint32_t fid,
S390PCIBusDevice *s390_pci_find_dev_by_idx(S390pciState *s, uint32_t idx);
S390PCIBusDevice *s390_pci_find_dev_by_fh(S390pciState *s, uint32_t fh);
S390PCIBusDevice *s390_pci_find_dev_by_fid(S390pciState *s, uint32_t fid);
+S390PCIBusDevice *s390_pci_find_dev_by_target(S390pciState *s,
+ const char *target);
S390PCIBusDevice *s390_pci_find_next_avail_dev(S390pciState *s,
S390PCIBusDevice *pbdev);
diff --git a/hw/s390x/s390-pci-inst.c b/hw/s390x/s390-pci-inst.c
index eba9ffb5f2..8e088f3dc9 100644
--- a/hw/s390x/s390-pci-inst.c
+++ b/hw/s390x/s390-pci-inst.c
@@ -413,29 +413,6 @@ int pcilg_service_call(S390CPU *cpu, uint8_t r1, uint8_t r2)
return 0;
}
-static void update_msix_table_msg_data(S390PCIBusDevice *pbdev, uint64_t offset,
- uint64_t *data, uint8_t len)
-{
- uint32_t val;
- uint8_t *msg_data;
-
- if (offset % PCI_MSIX_ENTRY_SIZE != 8) {
- return;
- }
-
- if (len != 4) {
- DPRINTF("access msix table msg data but len is %d\n", len);
- return;
- }
-
- msg_data = (uint8_t *)data - offset % PCI_MSIX_ENTRY_SIZE +
- PCI_MSIX_ENTRY_VECTOR_CTRL;
- val = pci_get_long(msg_data) |
- ((pbdev->fh & FH_MASK_INDEX) << ZPCI_MSI_VEC_BITS);
- pci_set_long(msg_data, val);
- DPRINTF("update msix msg_data to 0x%" PRIx64 "\n", *data);
-}
-
static int trap_msix(S390PCIBusDevice *pbdev, uint64_t offset, uint8_t pcias)
{
if (pbdev->msix.available && pbdev->msix.table_bar == pcias &&
@@ -508,7 +485,6 @@ int pcistg_service_call(S390CPU *cpu, uint8_t r1, uint8_t r2)
if (trap_msix(pbdev, offset, pcias)) {
offset = offset - pbdev->msix.table_offset;
mr = &pbdev->pdev->msix_table_mmio;
- update_msix_table_msg_data(pbdev, offset, &data, len);
} else {
mr = pbdev->pdev->io_regions[pcias].memory;
}
diff --git a/target/s390x/kvm.c b/target/s390x/kvm.c
index 1c68c36663..e348bfb7cc 100644
--- a/target/s390x/kvm.c
+++ b/target/s390x/kvm.c
@@ -2503,10 +2503,13 @@ int kvm_arch_fixup_msi_route(struct kvm_irq_routing_entry *route,
uint64_t address, uint32_t data, PCIDevice *dev)
{
S390PCIBusDevice *pbdev;
- uint32_t idx = data >> ZPCI_MSI_VEC_BITS;
uint32_t vec = data & ZPCI_MSI_VEC_MASK;
- pbdev = s390_pci_find_dev_by_idx(s390_get_phb(), idx);
+ if (!dev) {
+ return -ENODEV;
+ }
+
+ pbdev = s390_pci_find_dev_by_target(s390_get_phb(), DEVICE(dev)->id);
if (!pbdev) {
DPRINTF("add_msi_route no dev\n");
return -ENODEV;
--
2.11.0 (Apple Git-81)
next prev parent reply other threads:[~2017-08-28 8:05 UTC|newest]
Thread overview: 28+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-08-28 8:04 [Qemu-devel] [PATCH 0/4] four zpci patches Yi Min Zhao
2017-08-28 8:04 ` [Qemu-devel] [PATCH 1/4] s390x/pci: fixup trap_msix() Yi Min Zhao
2017-08-28 14:51 ` Cornelia Huck
2017-08-29 4:32 ` Yi Min Zhao
2017-08-29 8:00 ` Cornelia Huck
2017-08-29 8:05 ` Yi Min Zhao
2017-08-29 8:12 ` Yi Min Zhao
2017-08-29 8:22 ` Cornelia Huck
2017-08-29 8:33 ` Yi Min Zhao
2017-08-29 8:58 ` Cornelia Huck
2017-08-30 9:47 ` Cornelia Huck
2017-08-28 8:04 ` Yi Min Zhao [this message]
2017-08-28 15:04 ` [Qemu-devel] [PATCH 2/4] s390x/pci: remove idx from msix msg data Cornelia Huck
2017-08-29 4:33 ` Yi Min Zhao
2017-08-28 8:04 ` [Qemu-devel] [PATCH 3/4] s390x/pci: fixup ind_offset of msix routing entry Yi Min Zhao
2017-08-28 15:33 ` Cornelia Huck
2017-08-29 4:39 ` Yi Min Zhao
2017-08-28 8:04 ` [Qemu-devel] [PATCH 4/4] s390x/pci: add iommu replay callback Yi Min Zhao
2017-08-28 15:57 ` Cornelia Huck
2017-08-29 4:46 ` Yi Min Zhao
2017-08-29 8:07 ` Cornelia Huck
2017-08-29 8:26 ` Yi Min Zhao
2017-08-29 9:33 ` Cornelia Huck
2017-08-29 9:49 ` Cornelia Huck
2017-08-29 9:53 ` Yi Min Zhao
2017-08-29 9:51 ` Yi Min Zhao
2017-08-29 9:57 ` Cornelia Huck
2017-08-29 10:00 ` Yi Min Zhao
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1503907487-2764-3-git-send-email-zyimin@linux.vnet.ibm.com \
--to=zyimin@linux.vnet.ibm.com \
--cc=agraf@suse.de \
--cc=borntraeger@de.ibm.com \
--cc=cohuck@redhat.com \
--cc=pasic@linux.vnet.ibm.com \
--cc=pmorel@linux.vnet.ibm.com \
--cc=qemu-devel@nongnu.org \
--cc=richard.henderson@linaro.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).