[Qemu-devel] [PULL 23/36] watchdog: wdt_aspeed: Add support for the reset width register

[Peter Maydell <peter.maydell@linaro.org>]

From: Andrew Jeffery <andrew@aj.id.au>

The reset width register controls how the pulse on the SoC's WDTRST{1,2}
pins behaves. A pulse is emitted if the external reset bit is set in
WDT_CTRL. On the AST2500 WDT_RESET_WIDTH can consume magic bit patterns
to configure push-pull/open-drain and active-high/active-low
behaviours and thus needs some special handling in the write path.

As some of the capabilities depend on the SoC version a silicon-rev
property is introduced, which is used to guard version-specific
behaviour.

Signed-off-by: Andrew Jeffery <andrew@aj.id.au>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 include/hw/watchdog/wdt_aspeed.h |  2 +
 hw/watchdog/wdt_aspeed.c         | 93 +++++++++++++++++++++++++++++++++++-----
 2 files changed, 84 insertions(+), 11 deletions(-)

diff --git a/include/hw/watchdog/wdt_aspeed.h b/include/hw/watchdog/wdt_aspeed.h
index 080c223..7de3e5c 100644
--- a/include/hw/watchdog/wdt_aspeed.h
+++ b/include/hw/watchdog/wdt_aspeed.h
@@ -27,6 +27,8 @@ typedef struct AspeedWDTState {
     uint32_t regs[ASPEED_WDT_REGS_MAX];
 
     uint32_t pclk_freq;
+    uint32_t silicon_rev;
+    uint32_t ext_pulse_width_mask;
 } AspeedWDTState;
 
 #endif  /* ASPEED_WDT_H */
diff --git a/hw/watchdog/wdt_aspeed.c b/hw/watchdog/wdt_aspeed.c
index 8bbe579..22bce36 100644
--- a/hw/watchdog/wdt_aspeed.c
+++ b/hw/watchdog/wdt_aspeed.c
@@ -8,16 +8,19 @@
  */
 
 #include "qemu/osdep.h"
+
+#include "qapi/error.h"
 #include "qemu/log.h"
+#include "qemu/timer.h"
 #include "sysemu/watchdog.h"
+#include "hw/misc/aspeed_scu.h"
 #include "hw/sysbus.h"
-#include "qemu/timer.h"
 #include "hw/watchdog/wdt_aspeed.h"
 
-#define WDT_STATUS              (0x00 / 4)
-#define WDT_RELOAD_VALUE        (0x04 / 4)
-#define WDT_RESTART             (0x08 / 4)
-#define WDT_CTRL                (0x0C / 4)
+#define WDT_STATUS                      (0x00 / 4)
+#define WDT_RELOAD_VALUE                (0x04 / 4)
+#define WDT_RESTART                     (0x08 / 4)
+#define WDT_CTRL                        (0x0C / 4)
 #define   WDT_CTRL_RESET_MODE_SOC       (0x00 << 5)
 #define   WDT_CTRL_RESET_MODE_FULL_CHIP (0x01 << 5)
 #define   WDT_CTRL_1MHZ_CLK             BIT(4)
@@ -25,18 +28,41 @@
 #define   WDT_CTRL_WDT_INTR             BIT(2)
 #define   WDT_CTRL_RESET_SYSTEM         BIT(1)
 #define   WDT_CTRL_ENABLE               BIT(0)
+#define WDT_RESET_WIDTH                 (0x18 / 4)
+#define   WDT_RESET_WIDTH_ACTIVE_HIGH   BIT(31)
+#define     WDT_POLARITY_MASK           (0xFF << 24)
+#define     WDT_ACTIVE_HIGH_MAGIC       (0xA5 << 24)
+#define     WDT_ACTIVE_LOW_MAGIC        (0x5A << 24)
+#define   WDT_RESET_WIDTH_PUSH_PULL     BIT(30)
+#define     WDT_DRIVE_TYPE_MASK         (0xFF << 24)
+#define     WDT_PUSH_PULL_MAGIC         (0xA8 << 24)
+#define     WDT_OPEN_DRAIN_MAGIC        (0x8A << 24)
 
-#define WDT_TIMEOUT_STATUS      (0x10 / 4)
-#define WDT_TIMEOUT_CLEAR       (0x14 / 4)
-#define WDT_RESET_WDITH         (0x18 / 4)
+#define WDT_TIMEOUT_STATUS              (0x10 / 4)
+#define WDT_TIMEOUT_CLEAR               (0x14 / 4)
 
-#define WDT_RESTART_MAGIC       0x4755
+#define WDT_RESTART_MAGIC               0x4755
 
 static bool aspeed_wdt_is_enabled(const AspeedWDTState *s)
 {
     return s->regs[WDT_CTRL] & WDT_CTRL_ENABLE;
 }
 
+static bool is_ast2500(const AspeedWDTState *s)
+{
+    switch (s->silicon_rev) {
+    case AST2500_A0_SILICON_REV:
+    case AST2500_A1_SILICON_REV:
+        return true;
+    case AST2400_A0_SILICON_REV:
+    case AST2400_A1_SILICON_REV:
+    default:
+        break;
+    }
+
+    return false;
+}
+
 static uint64_t aspeed_wdt_read(void *opaque, hwaddr offset, unsigned size)
 {
     AspeedWDTState *s = ASPEED_WDT(opaque);
@@ -55,9 +81,10 @@ static uint64_t aspeed_wdt_read(void *opaque, hwaddr offset, unsigned size)
         return 0;
     case WDT_CTRL:
         return s->regs[WDT_CTRL];
+    case WDT_RESET_WIDTH:
+        return s->regs[WDT_RESET_WIDTH];
     case WDT_TIMEOUT_STATUS:
     case WDT_TIMEOUT_CLEAR:
-    case WDT_RESET_WDITH:
         qemu_log_mask(LOG_UNIMP,
                       "%s: uninmplemented read at offset 0x%" HWADDR_PRIx "\n",
                       __func__, offset);
@@ -119,9 +146,27 @@ static void aspeed_wdt_write(void *opaque, hwaddr offset, uint64_t data,
             timer_del(s->timer);
         }
         break;
+    case WDT_RESET_WIDTH:
+    {
+        uint32_t property = data & WDT_POLARITY_MASK;
+
+        if (property && is_ast2500(s)) {
+            if (property == WDT_ACTIVE_HIGH_MAGIC) {
+                s->regs[WDT_RESET_WIDTH] |= WDT_RESET_WIDTH_ACTIVE_HIGH;
+            } else if (property == WDT_ACTIVE_LOW_MAGIC) {
+                s->regs[WDT_RESET_WIDTH] &= ~WDT_RESET_WIDTH_ACTIVE_HIGH;
+            } else if (property == WDT_PUSH_PULL_MAGIC) {
+                s->regs[WDT_RESET_WIDTH] |= WDT_RESET_WIDTH_PUSH_PULL;
+            } else if (property == WDT_OPEN_DRAIN_MAGIC) {
+                s->regs[WDT_RESET_WIDTH] &= ~WDT_RESET_WIDTH_PUSH_PULL;
+            }
+        }
+        s->regs[WDT_RESET_WIDTH] &= ~s->ext_pulse_width_mask;
+        s->regs[WDT_RESET_WIDTH] |= data & s->ext_pulse_width_mask;
+        break;
+    }
     case WDT_TIMEOUT_STATUS:
     case WDT_TIMEOUT_CLEAR:
-    case WDT_RESET_WDITH:
         qemu_log_mask(LOG_UNIMP,
                       "%s: uninmplemented write at offset 0x%" HWADDR_PRIx "\n",
                       __func__, offset);
@@ -167,6 +212,7 @@ static void aspeed_wdt_reset(DeviceState *dev)
     s->regs[WDT_RELOAD_VALUE] = 0x03EF1480;
     s->regs[WDT_RESTART] = 0;
     s->regs[WDT_CTRL] = 0;
+    s->regs[WDT_RESET_WIDTH] = 0xFF;
 
     timer_del(s->timer);
 }
@@ -187,6 +233,25 @@ static void aspeed_wdt_realize(DeviceState *dev, Error **errp)
     SysBusDevice *sbd = SYS_BUS_DEVICE(dev);
     AspeedWDTState *s = ASPEED_WDT(dev);
 
+    if (!is_supported_silicon_rev(s->silicon_rev)) {
+        error_setg(errp, "Unknown silicon revision: 0x%" PRIx32,
+                s->silicon_rev);
+        return;
+    }
+
+    switch (s->silicon_rev) {
+    case AST2400_A0_SILICON_REV:
+    case AST2400_A1_SILICON_REV:
+        s->ext_pulse_width_mask = 0xff;
+        break;
+    case AST2500_A0_SILICON_REV:
+    case AST2500_A1_SILICON_REV:
+        s->ext_pulse_width_mask = 0xfffff;
+        break;
+    default:
+        g_assert_not_reached();
+    }
+
     s->timer = timer_new_ns(QEMU_CLOCK_VIRTUAL, aspeed_wdt_timer_expired, dev);
 
     /* FIXME: This setting should be derived from the SCU hw strapping
@@ -199,6 +264,11 @@ static void aspeed_wdt_realize(DeviceState *dev, Error **errp)
     sysbus_init_mmio(sbd, &s->iomem);
 }
 
+static Property aspeed_wdt_properties[] = {
+    DEFINE_PROP_UINT32("silicon-rev", AspeedWDTState, silicon_rev, 0),
+    DEFINE_PROP_END_OF_LIST(),
+};
+
 static void aspeed_wdt_class_init(ObjectClass *klass, void *data)
 {
     DeviceClass *dc = DEVICE_CLASS(klass);
@@ -207,6 +277,7 @@ static void aspeed_wdt_class_init(ObjectClass *klass, void *data)
     dc->reset = aspeed_wdt_reset;
     set_bit(DEVICE_CATEGORY_MISC, dc->categories);
     dc->vmsd = &vmstate_aspeed_wdt;
+    dc->props = aspeed_wdt_properties;
 }
 
 static const TypeInfo aspeed_wdt_info = {
-- 
2.7.4