From: Peter Maydell <peter.maydell@linaro.org>
To: qemu-arm@nongnu.org, qemu-devel@nongnu.org
Cc: patches@linaro.org, Richard Henderson <rth@twiddle.net>
Subject: [Qemu-devel] [PATCH v2 3/3] target/arm: Implement new do_transaction_failed hook
Date: Tue, 5 Sep 2017 16:53:34 +0100 [thread overview]
Message-ID: <1504626814-23124-4-git-send-email-peter.maydell@linaro.org> (raw)
In-Reply-To: <1504626814-23124-1-git-send-email-peter.maydell@linaro.org>
Implement the new do_transaction_failed hook for ARM, which should
cause the CPU to take a prefetch abort or data abort.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
---
target/arm/internals.h | 10 ++++++++++
target/arm/cpu.c | 1 +
target/arm/op_helper.c | 43 +++++++++++++++++++++++++++++++++++++++++++
3 files changed, 54 insertions(+)
diff --git a/target/arm/internals.h b/target/arm/internals.h
index 461f558..b100da9 100644
--- a/target/arm/internals.h
+++ b/target/arm/internals.h
@@ -472,6 +472,16 @@ void arm_cpu_do_unaligned_access(CPUState *cs, vaddr vaddr,
MMUAccessType access_type,
int mmu_idx, uintptr_t retaddr);
+/* arm_cpu_do_transaction_failed: handle a memory system error response
+ * (eg "no device/memory present at address") by raising an external abort
+ * exception
+ */
+void arm_cpu_do_transaction_failed(CPUState *cs, hwaddr physaddr,
+ vaddr addr, unsigned size,
+ MMUAccessType access_type,
+ int mmu_idx, MemTxAttrs attrs,
+ MemTxResult response, uintptr_t retaddr);
+
/* Call the EL change hook if one has been registered */
static inline void arm_call_el_change_hook(ARMCPU *cpu)
{
diff --git a/target/arm/cpu.c b/target/arm/cpu.c
index 41ae6ba..a323e6b 100644
--- a/target/arm/cpu.c
+++ b/target/arm/cpu.c
@@ -1667,6 +1667,7 @@ static void arm_cpu_class_init(ObjectClass *oc, void *data)
#else
cc->do_interrupt = arm_cpu_do_interrupt;
cc->do_unaligned_access = arm_cpu_do_unaligned_access;
+ cc->do_transaction_failed = arm_cpu_do_transaction_failed;
cc->get_phys_page_attrs_debug = arm_cpu_get_phys_page_attrs_debug;
cc->asidx_from_attrs = arm_asidx_from_attrs;
cc->vmsd = &vmstate_arm_cpu;
diff --git a/target/arm/op_helper.c b/target/arm/op_helper.c
index 8f6db80..d1bca46 100644
--- a/target/arm/op_helper.c
+++ b/target/arm/op_helper.c
@@ -229,6 +229,49 @@ void arm_cpu_do_unaligned_access(CPUState *cs, vaddr vaddr,
deliver_fault(cpu, vaddr, access_type, fsr, fsc, &fi);
}
+/* arm_cpu_do_transaction_failed: handle a memory system error response
+ * (eg "no device/memory present at address") by raising an external abort
+ * exception
+ */
+void arm_cpu_do_transaction_failed(CPUState *cs, hwaddr physaddr,
+ vaddr addr, unsigned size,
+ MMUAccessType access_type,
+ int mmu_idx, MemTxAttrs attrs,
+ MemTxResult response, uintptr_t retaddr)
+{
+ ARMCPU *cpu = ARM_CPU(cs);
+ CPUARMState *env = &cpu->env;
+ uint32_t fsr, fsc;
+ ARMMMUFaultInfo fi = {};
+ ARMMMUIdx arm_mmu_idx = core_to_arm_mmu_idx(env, mmu_idx);
+
+ if (retaddr) {
+ /* now we have a real cpu fault */
+ cpu_restore_state(cs, retaddr);
+ }
+
+ /* The EA bit in syndromes and fault status registers is an
+ * IMPDEF classification of external aborts. ARM implementations
+ * usually use this to indicate AXI bus Decode error (0) or
+ * Slave error (1); in QEMU we follow that.
+ */
+ fi.ea = (response != MEMTX_DECODE_ERROR);
+
+ /* The fault status register format depends on whether we're using
+ * the LPAE long descriptor format, or the short descriptor format.
+ */
+ if (arm_s1_regime_using_lpae_format(env, arm_mmu_idx)) {
+ /* long descriptor form, STATUS 0b010000: synchronous ext abort */
+ fsr = (fi.ea << 12) | (1 << 9) | 0x10;
+ } else {
+ /* short descriptor form, FSR 0b01000 : synchronous ext abort */
+ fsr = (fi.ea << 12) | 0x8;
+ }
+ fsc = 0x10;
+
+ deliver_fault(cpu, addr, access_type, fsr, fsc, &fi);
+}
+
#endif /* !defined(CONFIG_USER_ONLY) */
uint32_t HELPER(add_setq)(CPUARMState *env, uint32_t a, uint32_t b)
--
2.7.4
prev parent reply other threads:[~2017-09-05 15:53 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-09-05 15:53 [Qemu-devel] [PATCH v2 0/3] Add do_transaction_failed hook for ARM Peter Maydell
2017-09-05 15:53 ` [Qemu-devel] [PATCH v2 1/3] boards.h: Define new flag ignore_memory_transaction_failures Peter Maydell
2017-09-05 16:03 ` Richard Henderson
2017-09-06 23:16 ` Alistair Francis
2017-09-05 15:53 ` [Qemu-devel] [PATCH v2 2/3] hw/arm: Set ignore_memory_transaction_failures for most ARM boards Peter Maydell
2017-09-06 23:18 ` Alistair Francis
2017-09-05 15:53 ` Peter Maydell [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1504626814-23124-4-git-send-email-peter.maydell@linaro.org \
--to=peter.maydell@linaro.org \
--cc=patches@linaro.org \
--cc=qemu-arm@nongnu.org \
--cc=qemu-devel@nongnu.org \
--cc=rth@twiddle.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).