qemu-devel.nongnu.org archive mirror
 help / color / mirror / Atom feed
From: Peter Maydell <peter.maydell@linaro.org>
To: qemu-devel@nongnu.org
Subject: [Qemu-devel] [PULL 07/18] target/arm: Rename 'type' to 'excret' in do_v7m_exception_exit()
Date: Thu, 14 Sep 2017 18:52:42 +0100	[thread overview]
Message-ID: <1505411573-27848-8-git-send-email-peter.maydell@linaro.org> (raw)
In-Reply-To: <1505411573-27848-1-git-send-email-peter.maydell@linaro.org>

In the v7M and v8M ARM ARM, the magic exception return values are
referred to as EXC_RETURN values, and in QEMU we use V7M_EXCRET_*
constants to define bits within them. Rename the 'type' variable
which holds the exception return value in do_v7m_exception_exit()
to excret, making it clearer that it does hold an EXC_RETURN value.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Alistair Francis <alistair.francis@xilinx.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 1505137930-13255-8-git-send-email-peter.maydell@linaro.org
---
 target/arm/helper.c | 23 ++++++++++++-----------
 1 file changed, 12 insertions(+), 11 deletions(-)

diff --git a/target/arm/helper.c b/target/arm/helper.c
index a502e4e..4f41841 100644
--- a/target/arm/helper.c
+++ b/target/arm/helper.c
@@ -6212,7 +6212,7 @@ static void v7m_push_stack(ARMCPU *cpu)
 static void do_v7m_exception_exit(ARMCPU *cpu)
 {
     CPUARMState *env = &cpu->env;
-    uint32_t type;
+    uint32_t excret;
     uint32_t xpsr;
     bool ufault = false;
     bool return_to_sp_process = false;
@@ -6233,18 +6233,19 @@ static void do_v7m_exception_exit(ARMCPU *cpu)
      * the target value up between env->regs[15] and env->thumb in
      * gen_bx(). Reconstitute it.
      */
-    type = env->regs[15];
+    excret = env->regs[15];
     if (env->thumb) {
-        type |= 1;
+        excret |= 1;
     }
 
     qemu_log_mask(CPU_LOG_INT, "Exception return: magic PC %" PRIx32
                   " previous exception %d\n",
-                  type, env->v7m.exception);
+                  excret, env->v7m.exception);
 
-    if ((type & R_V7M_EXCRET_RES1_MASK) != R_V7M_EXCRET_RES1_MASK) {
+    if ((excret & R_V7M_EXCRET_RES1_MASK) != R_V7M_EXCRET_RES1_MASK) {
         qemu_log_mask(LOG_GUEST_ERROR, "M profile: zero high bits in exception "
-                      "exit PC value 0x%" PRIx32 " are UNPREDICTABLE\n", type);
+                      "exit PC value 0x%" PRIx32 " are UNPREDICTABLE\n",
+                      excret);
     }
 
     if (env->v7m.exception != ARMV7M_EXCP_NMI) {
@@ -6255,7 +6256,7 @@ static void do_v7m_exception_exit(ARMCPU *cpu)
          * which security state's faultmask to clear. (v8M ARM ARM R_KBNF.)
          */
         if (arm_feature(env, ARM_FEATURE_M_SECURITY)) {
-            int es = type & R_V7M_EXCRET_ES_MASK;
+            int es = excret & R_V7M_EXCRET_ES_MASK;
             if (armv7m_nvic_raw_execution_priority(env->nvic) >= 0) {
                 env->v7m.faultmask[es] = 0;
             }
@@ -6283,7 +6284,7 @@ static void do_v7m_exception_exit(ARMCPU *cpu)
         g_assert_not_reached();
     }
 
-    switch (type & 0xf) {
+    switch (excret & 0xf) {
     case 1: /* Return to Handler */
         return_to_handler = true;
         break;
@@ -6306,7 +6307,7 @@ static void do_v7m_exception_exit(ARMCPU *cpu)
          */
         env->v7m.cfsr[env->v7m.secure] |= R_V7M_CFSR_INVPC_MASK;
         armv7m_nvic_set_pending(env->nvic, ARMV7M_EXCP_USAGE);
-        v7m_exception_taken(cpu, type);
+        v7m_exception_taken(cpu, excret);
         qemu_log_mask(CPU_LOG_INT, "...taking UsageFault on existing "
                       "stackframe: failed exception return integrity check\n");
         return;
@@ -6341,14 +6342,14 @@ static void do_v7m_exception_exit(ARMCPU *cpu)
 
     /* The restored xPSR exception field will be zero if we're
      * resuming in Thread mode. If that doesn't match what the
-     * exception return type specified then this is a UsageFault.
+     * exception return excret specified then this is a UsageFault.
      */
     if (return_to_handler != arm_v7m_is_handler_mode(env)) {
         /* Take an INVPC UsageFault by pushing the stack again. */
         armv7m_nvic_set_pending(env->nvic, ARMV7M_EXCP_USAGE);
         env->v7m.cfsr[env->v7m.secure] |= R_V7M_CFSR_INVPC_MASK;
         v7m_push_stack(cpu);
-        v7m_exception_taken(cpu, type);
+        v7m_exception_taken(cpu, excret);
         qemu_log_mask(CPU_LOG_INT, "...taking UsageFault on new stackframe: "
                       "failed exception return integrity check\n");
         return;
-- 
2.7.4

  parent reply	other threads:[~2017-09-14 17:52 UTC|newest]

Thread overview: 20+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2017-09-14 17:52 [Qemu-devel] [PULL 00/18] target-arm queue Peter Maydell
2017-09-14 17:52 ` [Qemu-devel] [PULL 01/18] target/arm: Use M_REG_NUM_BANKS rather than hardcoding 2 Peter Maydell
2017-09-14 17:52 ` [Qemu-devel] [PULL 02/18] target/arm: Clear exclusive monitor on v7M reset, exception entry/exit Peter Maydell
2017-09-14 17:52 ` [Qemu-devel] [PULL 03/18] target/arm: Get PRECISERR and IBUSERR the right way round Peter Maydell
2017-09-14 17:52 ` [Qemu-devel] [PULL 04/18] nvic: Don't apply group priority mask to negative priorities Peter Maydell
2017-09-14 17:52 ` [Qemu-devel] [PULL 05/18] target/arm: Remove unnecessary '| 0xf0000000' from do_v7m_exception_exit() Peter Maydell
2017-09-14 17:52 ` [Qemu-devel] [PULL 06/18] target/arm: Add and use defines for EXCRET constants Peter Maydell
2017-09-14 17:52 ` Peter Maydell [this message]
2017-09-14 17:52 ` [Qemu-devel] [PULL 08/18] xlnx-ep108: Rename to ZCU102 Peter Maydell
2017-09-14 17:52 ` [Qemu-devel] [PULL 09/18] xlnx-zcu102: Manually create the machines Peter Maydell
2017-09-14 17:52 ` [Qemu-devel] [PULL 10/18] xlnx-zcu102: Add a machine level secure property Peter Maydell
2017-09-14 17:52 ` [Qemu-devel] [PULL 11/18] xlnx-zcu102: Add a machine level virtualization property Peter Maydell
2017-09-14 17:52 ` [Qemu-devel] [PULL 12/18] xlnx-zcu102: Mark the EP108 machine as deprecated Peter Maydell
2017-09-14 17:52 ` [Qemu-devel] [PULL 13/18] AArch64: Fix single stepping of ERET instruction Peter Maydell
2017-09-14 17:52 ` [Qemu-devel] [PULL 14/18] target/arm: Avoid an extra temporary for store_exclusive Peter Maydell
2017-09-14 17:52 ` [Qemu-devel] [PULL 15/18] hw/pci-host/gpex: Set INTx index/gsi mapping Peter Maydell
2017-09-14 17:52 ` [Qemu-devel] [PULL 16/18] hw/arm/virt: Set INTx/gsi mapping Peter Maydell
2017-09-14 17:52 ` [Qemu-devel] [PULL 17/18] hw/pci-host/gpex: Implement PCI INTx routing Peter Maydell
2017-09-14 17:52 ` [Qemu-devel] [PULL 18/18] mps2-an511: Fix wiring of UART overflow interrupt lines Peter Maydell
2017-09-15 17:59 ` [Qemu-devel] [PULL 00/18] target-arm queue Peter Maydell

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1505411573-27848-8-git-send-email-peter.maydell@linaro.org \
    --to=peter.maydell@linaro.org \
    --cc=qemu-devel@nongnu.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).