From: Paolo Bonzini <pbonzini@redhat.com>
To: qemu-devel@nongnu.org
Subject: [Qemu-devel] [PULL 04/29] char: don't skip client cleanup if 'connected' flag is unset
Date: Wed, 18 Oct 2017 18:11:56 +0200 [thread overview]
Message-ID: <1508343141-31835-5-git-send-email-pbonzini@redhat.com> (raw)
In-Reply-To: <1508343141-31835-1-git-send-email-pbonzini@redhat.com>
From: "Daniel P. Berrange" <berrange@redhat.com>
The tcp_chr_free_connection & tcp_chr_disconnect methods both
skip all of their cleanup work unless the 's->connected' flag
is set. This flag is set when the incoming client connection
is ready to use. Crucially this is *after* the TLS handshake
has been completed. So if the TLS handshake fails and we try
to cleanup the failed client, all the cleanup is skipped as
's->connected' is still false.
The only important thing that should be skipped in this case
is sending of the CHR_EVENT_CLOSED, because we never got as
far as sending the corresponding CHR_EVENT_OPENED. Every other
bit of cleanup can be robust against being called even when
s->connected is false.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-Id: <20171005155057.7664-1-berrange@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
---
chardev/char-socket.c | 19 +++++++++----------
1 file changed, 9 insertions(+), 10 deletions(-)
diff --git a/chardev/char-socket.c b/chardev/char-socket.c
index e65148f..53eda8e 100644
--- a/chardev/char-socket.c
+++ b/chardev/char-socket.c
@@ -332,10 +332,6 @@ static void tcp_chr_free_connection(Chardev *chr)
SocketChardev *s = SOCKET_CHARDEV(chr);
int i;
- if (!s->connected) {
- return;
- }
-
if (s->read_msgfds_num) {
for (i = 0; i < s->read_msgfds_num; i++) {
close(s->read_msgfds[i]);
@@ -394,22 +390,25 @@ static void update_disconnected_filename(SocketChardev *s)
s->is_listen, s->is_telnet);
}
+/* NB may be called even if tcp_chr_connect has not been
+ * reached, due to TLS or telnet initialization failure,
+ * so can *not* assume s->connected == true
+ */
static void tcp_chr_disconnect(Chardev *chr)
{
SocketChardev *s = SOCKET_CHARDEV(chr);
-
- if (!s->connected) {
- return;
- }
+ bool emit_close = s->connected;
tcp_chr_free_connection(chr);
- if (s->listen_ioc) {
+ if (s->listen_ioc && s->listen_tag == 0) {
s->listen_tag = qio_channel_add_watch(
QIO_CHANNEL(s->listen_ioc), G_IO_IN, tcp_chr_accept, chr, NULL);
}
update_disconnected_filename(s);
- qemu_chr_be_event(chr, CHR_EVENT_CLOSED);
+ if (emit_close) {
+ qemu_chr_be_event(chr, CHR_EVENT_CLOSED);
+ }
if (s->reconnect_time) {
qemu_chr_socket_restart_timer(chr);
}
--
1.8.3.1
next prev parent reply other threads:[~2017-10-18 16:13 UTC|newest]
Thread overview: 32+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-10-18 16:11 [Qemu-devel] [PULL 00/29] Misc patches for 2017-10-18 Paolo Bonzini
2017-10-18 16:11 ` [Qemu-devel] [PULL 01/29] checkpatch: refine mode selection Paolo Bonzini
2017-10-18 16:11 ` [Qemu-devel] [PULL 02/29] scsi-disk: support reporting of rotation rate Paolo Bonzini
2017-10-18 16:11 ` [Qemu-devel] [PULL 03/29] ide: " Paolo Bonzini
2017-10-18 16:11 ` Paolo Bonzini [this message]
2017-10-18 16:11 ` [Qemu-devel] [PULL 05/29] exec: add page_mask for flatview_do_translate Paolo Bonzini
2017-10-18 16:11 ` [Qemu-devel] [PULL 06/29] exec: simplify address_space_get_iotlb_entry Paolo Bonzini
2017-10-18 16:11 ` [Qemu-devel] [PULL 07/29] memory: fix off-by-one error in memory_region_notify_one() Paolo Bonzini
2017-10-18 16:12 ` [Qemu-devel] [PULL 08/29] pc: make sure that plugged CPUs are of the same type Paolo Bonzini
2017-10-18 16:12 ` [Qemu-devel] [PULL 09/29] disas: Always initialize read_memory_inner_func properly Paolo Bonzini
2017-10-18 16:12 ` [Qemu-devel] [PULL 10/29] build: remove CONFIG_LIBDECNUMBER Paolo Bonzini
2017-10-18 16:12 ` [Qemu-devel] [PULL 11/29] nios2: define tcg_env Paolo Bonzini
2017-10-18 16:12 ` [Qemu-devel] [PULL 12/29] docs/devel/loads-stores.rst: Document our various load and store APIs Paolo Bonzini
2017-10-18 16:12 ` [Qemu-devel] [PULL 13/29] tco: add trace events Paolo Bonzini
2017-10-18 16:12 ` [Qemu-devel] [PULL 14/29] target/i386: introduce x86_ld*_code Paolo Bonzini
2017-10-18 16:12 ` [Qemu-devel] [PULL 15/29] target/i386: trap on instructions longer than >15 bytes Paolo Bonzini
2017-10-18 16:12 ` [Qemu-devel] [PULL 16/29] memory: call log_start after region_add Paolo Bonzini
2017-10-18 16:12 ` [Qemu-devel] [PULL 17/29] kvm: fix alignment of ram address Paolo Bonzini
2017-10-18 16:12 ` [Qemu-devel] [PULL 18/29] kvm: tolerate non-existing slot for log_start/log_stop/log_sync Paolo Bonzini
2017-10-18 16:12 ` [Qemu-devel] [PULL 19/29] kvm: fix error message when failing to unregister slot Paolo Bonzini
2017-10-18 16:12 ` [Qemu-devel] [PULL 20/29] kvm: region_add and region_del is not called on updates Paolo Bonzini
2017-10-18 16:12 ` [Qemu-devel] [PULL 21/29] kvm: simplify kvm_align_section() Paolo Bonzini
2017-10-18 16:12 ` [Qemu-devel] [PULL 22/29] memory: reuse section_from_flat_range() Paolo Bonzini
2017-10-18 16:12 ` [Qemu-devel] [PULL 23/29] notdirty_mem_write: implement 8-byte accesses Paolo Bonzini
2017-10-18 16:12 ` [Qemu-devel] [PULL 24/29] watch_mem_write: " Paolo Bonzini
2017-10-18 16:12 ` [Qemu-devel] [PULL 25/29] qemu-pr-helper: use new libmultipath API Paolo Bonzini
2017-10-18 16:12 ` [Qemu-devel] [PULL 26/29] qdev: store DeviceState's canonical path to use when unparenting Paolo Bonzini
2017-10-18 16:12 ` [Qemu-devel] [PULL 27/29] Revert "qdev: Free QemuOpts when the QOM path goes away" Paolo Bonzini
2017-10-18 16:12 ` [Qemu-devel] [PULL 28/29] qdev: defer DEVICE_DEL event until instance_finalize() Paolo Bonzini
2017-10-18 16:12 ` [Qemu-devel] [PULL 29/29] scsi: reject configurations with logical block size > physical block size Paolo Bonzini
2017-10-18 17:13 ` [Qemu-devel] [PULL 00/29] Misc patches for 2017-10-18 no-reply
2017-10-19 15:47 ` Peter Maydell
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1508343141-31835-5-git-send-email-pbonzini@redhat.com \
--to=pbonzini@redhat.com \
--cc=qemu-devel@nongnu.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).