qemu-devel.nongnu.org archive mirror
 help / color / mirror / Atom feed
From: Pierre Morel <pmorel@linux.vnet.ibm.com>
To: qemu-devel@nongnu.org
Cc: cohuck@redhat.com, agraf@suse.de, borntraeger@de.ibm.com,
	zyimin@linux.vnet.ibm.com, pasic@linux.vnet.ibm.com
Subject: [Qemu-devel] [PATCH 1/7] s390x/pci: factor out endianess conversion
Date: Tue,  7 Nov 2017 18:24:33 +0100	[thread overview]
Message-ID: <1510075479-17224-2-git-send-email-pmorel@linux.vnet.ibm.com> (raw)
In-Reply-To: <1510075479-17224-1-git-send-email-pmorel@linux.vnet.ibm.com>

There are two places where the same endianness conversion
is done.
Let's factor this out into a static function.

Signed-off-by: Pierre Morel <pmorel@linux.vnet.ibm.com>
Reviewed-by: Yi Min Zhao <zyimin@linux.vnet.ibm.com>
---
 hw/s390x/s390-pci-inst.c | 58 ++++++++++++++++++++++++++----------------------
 1 file changed, 32 insertions(+), 26 deletions(-)

diff --git a/hw/s390x/s390-pci-inst.c b/hw/s390x/s390-pci-inst.c
index 8e088f3..8fcb02d 100644
--- a/hw/s390x/s390-pci-inst.c
+++ b/hw/s390x/s390-pci-inst.c
@@ -314,6 +314,35 @@ out:
     return 0;
 }
 
+/**
+ * This function swaps the data at ptr according from one
+ * endianness to the other.
+ * valid data in the uint64_t data field.
+ * @ptr: a pointer to a uint64_t data field
+ * @len: the length of the valid data, must be 1,2,4 or 8
+ */
+static int zpci_endian_swap(uint64_t *ptr, uint8_t len)
+{
+    uint64_t data = *ptr;
+    switch (len) {
+    case 1:
+        break;
+    case 2:
+        data = bswap16(data);
+        break;
+    case 4:
+        data = bswap32(data);
+        break;
+    case 8:
+        data = bswap64(data);
+        break;
+    default:
+        return -EINVAL;
+    }
+    *ptr = data;
+    return 0;
+}
+
 int pcilg_service_call(S390CPU *cpu, uint8_t r1, uint8_t r2)
 {
     CPUS390XState *env = &cpu->env;
@@ -385,19 +414,7 @@ int pcilg_service_call(S390CPU *cpu, uint8_t r1, uint8_t r2)
         data =  pci_host_config_read_common(
                    pbdev->pdev, offset, pci_config_size(pbdev->pdev), len);
 
-        switch (len) {
-        case 1:
-            break;
-        case 2:
-            data = bswap16(data);
-            break;
-        case 4:
-            data = bswap32(data);
-            break;
-        case 8:
-            data = bswap64(data);
-            break;
-        default:
+        if (zpci_endian_swap(&data, len)) {
             program_interrupt(env, PGM_OPERAND, 4);
             return 0;
         }
@@ -500,19 +517,8 @@ int pcistg_service_call(S390CPU *cpu, uint8_t r1, uint8_t r2)
             program_interrupt(env, PGM_OPERAND, 4);
             return 0;
         }
-        switch (len) {
-        case 1:
-            break;
-        case 2:
-            data = bswap16(data);
-            break;
-        case 4:
-            data = bswap32(data);
-            break;
-        case 8:
-            data = bswap64(data);
-            break;
-        default:
+
+        if (zpci_endian_swap(&data, len)) {
             program_interrupt(env, PGM_OPERAND, 4);
             return 0;
         }
-- 
2.7.4

  reply	other threads:[~2017-11-07 17:24 UTC|newest]

Thread overview: 41+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2017-11-07 17:24 [Qemu-devel] [PATCH 0/7] s390x/pci: Improve zPCI to cover more cases Pierre Morel
2017-11-07 17:24 ` Pierre Morel [this message]
2017-11-09 16:38   ` [Qemu-devel] [PATCH 1/7] s390x/pci: factor out endianess conversion Cornelia Huck
2017-11-09 18:55     ` Philippe Mathieu-Daudé
2017-11-09 19:20       ` Cornelia Huck
2017-11-13 15:36         ` Pierre Morel
2017-11-13 16:38           ` Cornelia Huck
2017-11-13 16:43             ` Pierre Morel
2017-11-13  9:34       ` Pierre Morel
2017-11-13  9:37       ` Pierre Morel
2017-11-07 17:24 ` [Qemu-devel] [PATCH 2/7] s390x/pci: rework PCI STORE Pierre Morel
2017-11-09 16:50   ` Cornelia Huck
2017-11-10  9:22     ` Yi Min Zhao
2017-11-13  9:03     ` Pierre Morel
2017-11-13 11:48       ` Cornelia Huck
2017-11-13 14:40         ` Pierre Morel
2017-11-07 17:24 ` [Qemu-devel] [PATCH 3/7] s390x/pci: rework PCI LOAD Pierre Morel
2017-11-09 16:51   ` Cornelia Huck
2017-11-13  9:07     ` Pierre Morel
2017-11-13  9:44     ` Pierre Morel
2017-11-07 17:24 ` [Qemu-devel] [PATCH 4/7] s390x/pci: rework PCI STORE BLOCK Pierre Morel
2017-11-13 15:23   ` Cornelia Huck
2017-11-13 16:38     ` Pierre Morel
2017-11-13 17:10       ` Cornelia Huck
2017-11-15 10:05         ` Pierre Morel
2017-11-07 17:24 ` [Qemu-devel] [PATCH 5/7] s390x/pci: move the memory region read from pcilg Pierre Morel
2017-11-07 17:24 ` [Qemu-devel] [PATCH 6/7] s390x/pci: move the memory region write from pcistg Pierre Morel
2017-11-09 19:23   ` Cornelia Huck
2017-11-10  9:40     ` Yi Min Zhao
2017-11-10  9:51       ` Cornelia Huck
2017-11-13  9:17         ` Pierre Morel
2017-11-13  9:39         ` Pierre Morel
2017-11-13 11:54           ` Cornelia Huck
2017-11-13 14:44             ` Pierre Morel
2017-11-07 17:24 ` [Qemu-devel] [PATCH 7/7] s390x/pci: search for subregion inside the BARs Pierre Morel
2017-11-13 16:03   ` Cornelia Huck
2017-11-07 17:31 ` [Qemu-devel] [PATCH 0/7] s390x/pci: Improve zPCI to cover more cases Cornelia Huck
2017-11-07 17:50   ` Christian Borntraeger
2017-11-08  8:46     ` Cornelia Huck
2017-11-13 17:13 ` Cornelia Huck
2017-11-15 10:02   ` Pierre Morel

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1510075479-17224-2-git-send-email-pmorel@linux.vnet.ibm.com \
    --to=pmorel@linux.vnet.ibm.com \
    --cc=agraf@suse.de \
    --cc=borntraeger@de.ibm.com \
    --cc=cohuck@redhat.com \
    --cc=pasic@linux.vnet.ibm.com \
    --cc=qemu-devel@nongnu.org \
    --cc=zyimin@linux.vnet.ibm.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).