qemu-devel.nongnu.org archive mirror
 help / color / mirror / Atom feed
From: Jason Wang <jasowang@redhat.com>
To: qemu-devel@nongnu.org, peter.maydell@linaro.org
Cc: Mao Zhongyi <maozy.fnst@cn.fujitsu.com>,
	Zhang Chen <zhangckid@gmail.com>,
	Li Zhijian <lizhijian@cn.fujitsu.com>,
	Jason Wang <jasowang@redhat.com>
Subject: [Qemu-devel] [PULL 2/8] colo-compare: Insert packet into the suitable position of packet queue directly
Date: Tue, 14 Nov 2017 10:11:32 +0800	[thread overview]
Message-ID: <1510625498-4821-3-git-send-email-jasowang@redhat.com> (raw)
In-Reply-To: <1510625498-4821-1-git-send-email-jasowang@redhat.com>

From: Mao Zhongyi <maozy.fnst@cn.fujitsu.com>

Currently, a packet from pri_dev or sec_dev is fristly pushed at the
tail of the primary or secondary packet queue then sorted by the tcp
sequence number.

Now, this patch use g_queue_insert_sorted to insert the packet directly
into the suitable position to avoid ordering all packets each time when
a new packet is comming, thereby increasing efficiency.

In addition, consolidate the code that add a packet to the list of
Connection (primary or secondary) into a separate routine colo_insert_packet()
since the same chunk of code is called from two place.

Cc: Zhang Chen <zhangckid@gmail.com>
Cc: Li Zhijian <lizhijian@cn.fujitsu.com>
Cc: Jason Wang <jasowang@redhat.com>
Signed-off-by: Mao Zhongyi <maozy.fnst@cn.fujitsu.com>
Signed-off-by: Zhang Chen <zhangckid@gmail.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
---
 net/colo-compare.c | 40 ++++++++++++++++++++++------------------
 1 file changed, 22 insertions(+), 18 deletions(-)

diff --git a/net/colo-compare.c b/net/colo-compare.c
index b3f35d7..54b6347 100644
--- a/net/colo-compare.c
+++ b/net/colo-compare.c
@@ -113,6 +113,26 @@ static gint seq_sorter(Packet *a, Packet *b, gpointer data)
 }
 
 /*
+ * Return 1 on success, if return 0 means the
+ * packet will be dropped
+ */
+static int colo_insert_packet(GQueue *queue, Packet *pkt)
+{
+    if (g_queue_get_length(queue) <= MAX_QUEUE_SIZE) {
+        if (pkt->ip->ip_p == IPPROTO_TCP) {
+            g_queue_insert_sorted(queue,
+                                  pkt,
+                                  (GCompareDataFunc)seq_sorter,
+                                  NULL);
+        } else {
+            g_queue_push_tail(queue, pkt);
+        }
+        return 1;
+    }
+    return 0;
+}
+
+/*
  * Return 0 on success, if return -1 means the pkt
  * is unsupported(arp and ipv6) and will be sent later
  */
@@ -149,28 +169,12 @@ static int packet_enqueue(CompareState *s, int mode)
     }
 
     if (mode == PRIMARY_IN) {
-        if (g_queue_get_length(&conn->primary_list) <=
-                               MAX_QUEUE_SIZE) {
-            g_queue_push_tail(&conn->primary_list, pkt);
-            if (conn->ip_proto == IPPROTO_TCP) {
-                g_queue_sort(&conn->primary_list,
-                             (GCompareDataFunc)seq_sorter,
-                             NULL);
-            }
-        } else {
+        if (!colo_insert_packet(&conn->primary_list, pkt)) {
             error_report("colo compare primary queue size too big,"
                          "drop packet");
         }
     } else {
-        if (g_queue_get_length(&conn->secondary_list) <=
-                               MAX_QUEUE_SIZE) {
-            g_queue_push_tail(&conn->secondary_list, pkt);
-            if (conn->ip_proto == IPPROTO_TCP) {
-                g_queue_sort(&conn->secondary_list,
-                             (GCompareDataFunc)seq_sorter,
-                             NULL);
-            }
-        } else {
+        if (!colo_insert_packet(&conn->secondary_list, pkt)) {
             error_report("colo compare secondary queue size too big,"
                          "drop packet");
         }
-- 
2.7.4

  parent reply	other threads:[~2017-11-14  2:11 UTC|newest]

Thread overview: 14+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2017-11-14  2:11 [Qemu-devel] [PULL 0/8] Net patches Jason Wang
2017-11-14  2:11 ` [Qemu-devel] [PULL 1/8] net: fix check for number of parameters to -netdev socket Jason Wang
2017-11-14  2:11 ` Jason Wang [this message]
2017-11-14  2:11 ` [Qemu-devel] [PULL 3/8] colo-compare: compare the packet in a specified Connection Jason Wang
2017-11-15 18:57   ` Peter Maydell
2017-11-16  1:32     ` Mao Zhongyi
2017-11-14  2:11 ` [Qemu-devel] [PULL 4/8] colo-compare: Fix comments Jason Wang
2017-11-14  2:11 ` [Qemu-devel] [PULL 5/8] colo: Consolidate the duplicate code chunk into a routine Jason Wang
2017-11-14  2:11 ` [Qemu-devel] [PULL 6/8] Fix eepro100 simple transmission mode Jason Wang
2017-11-14  2:11 ` [Qemu-devel] [PULL 7/8] Add new PCI ID for i82559a Jason Wang
2017-11-15  6:43   ` Stefan Weil
2017-11-15 11:22     ` Jason Wang
2017-11-14  2:11 ` [Qemu-devel] [PULL 8/8] net/socket: fix coverity issue Jason Wang
2017-11-14 15:23 ` [Qemu-devel] [PULL 0/8] Net patches Peter Maydell

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1510625498-4821-3-git-send-email-jasowang@redhat.com \
    --to=jasowang@redhat.com \
    --cc=lizhijian@cn.fujitsu.com \
    --cc=maozy.fnst@cn.fujitsu.com \
    --cc=peter.maydell@linaro.org \
    --cc=qemu-devel@nongnu.org \
    --cc=zhangckid@gmail.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).