[Qemu-devel] [PATCH 0/2] Add vTPM emulator supportfor ppc64 platform

[Qemu-devel] [PATCH 0/2] Add vTPM emulator supportfor ppc64 platform

[Stefan Berger]

The following series of patches adds vTPM emulator support for the
ppc64 platform (pSeries). 

It can be tested as follows with swtpm/libtpms:

#> swtpm socket --tpmstate dir=/tmp/mytpm1 \
	--ctrl type=unixio,path=/tmp/mytpm1/ctrl.sock \
	--log level=2

If TPM 2 is desired, add --tpm2 as parameter to the above
and use the latest tpm2-preview branches of libtpms and swtpm.

In another terminal start QEMU:

#> sudo ./ppc64-softmmu/qemu-system-ppc64 -m 1024 \
	-monitor stdio -vnc :12 -vga std \
	--chardev socket,id=chrtpm,path=/tmp/mytpm1/ctrl.sock \
	-tpmdev emulator,id=tpm0,chardev=chrtpm \
	-device tpm-spapr,tpmdev=tpm0 \
	-L /tmp -bios boot_rom.bin \
	myimage.raw

Links:
 - libtpms: https://github.com/stefanberger/libtpms/wiki
 - swtpm: https://github.com/stefanberger/swtpm/wiki

Regards,
    Stefan


Stefan Berger (2):
  tpm_spapr: Support TPM for ppc64 using CRQ based interface
  tpm_spapr: Support suspend and resume

 hw/tpm/Makefile.objs |   1 +
 hw/tpm/tpm_spapr.c   | 433 +++++++++++++++++++++++++++++++++++++++++++++++++++
 include/sysemu/tpm.h |   3 +
 qapi/tpm.json        |   5 +-
 4 files changed, 440 insertions(+), 2 deletions(-)
 create mode 100644 hw/tpm/tpm_spapr.c

-- 
2.5.5

[Qemu-devel] [PATCH 1/2] tpm_spapr: Support TPM for ppc64 using CRQ based interface

[Stefan Berger]

Implement support for TPM on ppc64 by implementing the vTPM CRQ
interface as a frontend.

The Linux vTPM driver for ppc64 works with this emulation.

This emualtor also handles the TPM 2 case.

Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com>
---
 hw/tpm/Makefile.objs |   1 +
 hw/tpm/tpm_spapr.c   | 380 +++++++++++++++++++++++++++++++++++++++++++++++++++
 include/sysemu/tpm.h |   3 +
 qapi/tpm.json        |   5 +-
 4 files changed, 387 insertions(+), 2 deletions(-)
 create mode 100644 hw/tpm/tpm_spapr.c

diff --git a/hw/tpm/Makefile.objs b/hw/tpm/Makefile.objs
index 41f0b7a..71ea63e 100644
--- a/hw/tpm/Makefile.objs
+++ b/hw/tpm/Makefile.objs
@@ -1,3 +1,4 @@
 common-obj-$(CONFIG_TPM_TIS) += tpm_tis.o
 common-obj-$(CONFIG_TPM_PASSTHROUGH) += tpm_passthrough.o tpm_util.o
 common-obj-$(CONFIG_TPM_EMULATOR) += tpm_emulator.o tpm_util.o
+obj-$(CONFIG_PSERIES) += tpm_spapr.o
diff --git a/hw/tpm/tpm_spapr.c b/hw/tpm/tpm_spapr.c
new file mode 100644
index 0000000..909aeeb
--- /dev/null
+++ b/hw/tpm/tpm_spapr.c
@@ -0,0 +1,380 @@
+/*
+ * QEMU PowerPC pSeries Logical Partition (aka sPAPR) hardware System Emulator
+ *
+ * PAPR Virtual TPM
+ *
+ * Copyright (c) 2015, 2017 IBM Corporation.
+ *
+ * Authors:
+ *    Stefan Berger <stefanb@linux.vnet.ibm.com>
+ *
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
+ * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ * THE SOFTWARE.
+ *
+ */
+
+#include "qemu/osdep.h"
+#include "qapi/error.h"
+
+#include "sysemu/tpm_backend.h"
+#include "tpm_int.h"
+#include "tpm_util.h"
+
+#include "hw/ppc/spapr.h"
+#include "hw/ppc/spapr_vio.h"
+
+#define DEBUG_SPAPR_VTPM 0
+
+#define DPRINTF(fmt, ...) do { \
+    if (DEBUG_SPAPR_VTPM) { \
+        printf(fmt, ## __VA_ARGS__); \
+    } \
+} while (0)
+
+#define VIO_SPAPR_VTPM_DEVICE(obj) \
+     OBJECT_CHECK(SPAPRvTPMState, (obj), TYPE_TPM_SPAPR)
+
+typedef struct vio_crq {
+    uint8_t valid;  /* 0x80: cmd; 0xc0: init crq
+                       0x81-0x83: CRQ message response */
+    uint8_t msg;    /* see below */
+    uint16_t len;   /* len of TPM request; len of TPM response */
+    uint32_t data;  /* rtce_dma_handle when sending TPM request */
+    uint64_t reserved;
+} vio_crq;
+
+typedef union tpm_spapr_crq {
+    vio_crq s;
+    uint8_t raw[sizeof(vio_crq)];
+} tpm_spapr_crq;
+
+#define SPAPR_VTPM_VALID_INIT_CRQ_COMMAND  0xC0
+#define SPAPR_VTPM_VALID_COMMAND           0x80
+#define SPAPR_VTPM_MSG_RESULT              0x80
+
+/* msg types for valid = SPAPR_VTPM_VALID_INIT_CRQ */
+#define SPAPR_VTPM_INIT_CRQ_RESULT           0x1
+#define SPAPR_VTPM_INIT_CRQ_COMPLETE_RESULT  0x2
+
+/* msg types for valid = SPAPR_VTPM_VALID_CMD */
+#define SPAPR_VTPM_GET_VERSION               0x1
+#define SPAPR_VTPM_TPM_COMMAND               0x2
+#define SPAPR_VTPM_GET_RTCE_BUFFER_SIZE      0x3
+#define SPAPR_VTPM_PREPARE_TO_SUSPEND        0x4
+
+#define MAX_BUFFER_SIZE TARGET_PAGE_SIZE
+
+typedef struct {
+    VIOsPAPRDevice vdev;
+
+    tpm_spapr_crq crq; /* track single TPM command */
+
+    uint8_t state;
+#define SPAPR_VTPM_STATE_NONE         0
+#define SPAPR_VTPM_STATE_EXECUTION    1
+#define SPAPR_VTPM_STATE_COMPLETION   2
+
+    unsigned char buffer[MAX_BUFFER_SIZE];
+
+    TPMBackendCmd cmd;
+
+    TPMBackend *be_driver;
+    TPMVersion be_tpm_version;
+
+    size_t be_buffer_size;
+} SPAPRvTPMState;
+
+static void tpm_spapr_show_buffer(const unsigned char *buffer,
+                                  size_t buffer_len, const char *string)
+{
+#if DEBUG_SPAPR_VTPM
+    size_t i, len;
+
+    len = MIN(tpm_cmd_get_size(buffer), buffer_len);
+    printf("spapr_vtpm: %s length = %zu\n", string, len);
+    for (i = 0; i < len; i++) {
+        if (i && !(i % 16)) {
+            printf("\n");
+        }
+        printf("%.2X ", buffer[i]);
+    }
+    printf("\n");
+#endif
+}
+
+/*
+ * Send a request to the TPM.
+ */
+static void tpm_spapr_tpm_send(SPAPRvTPMState *s)
+{
+    tpm_spapr_show_buffer(s->buffer, sizeof(s->buffer), "spapr_vtpm: Tx TPM");
+
+    s->state = SPAPR_VTPM_STATE_EXECUTION;
+    s->cmd = (TPMBackendCmd) {
+        .locty = 0,
+        .in = s->buffer,
+        .in_len = MIN(tpm_cmd_get_size(s->buffer), sizeof(s->buffer)),
+        .out = s->buffer,
+        .out_len = sizeof(s->buffer),
+    };
+
+    tpm_backend_deliver_request(s->be_driver, &s->cmd);
+}
+
+static void tpm_spapr_got_payload(SPAPRvTPMState *s, tpm_spapr_crq *crq)
+{
+    long rc;
+    DPRINTF("tpm_spapr_got_payload: crq->s.data = 0x%x  crq->s.len = %d\n",
+            crq->s.data, crq->s.len);
+
+    /* a max. of be_buffer_size bytes can be transported */
+    rc = spapr_vio_dma_read(&s->vdev, crq->s.data,
+                            s->buffer, s->be_buffer_size);
+    if (rc) {
+        fprintf(stderr, "tpm_spapr_got_payload: DMA read failure !\n");
+    }
+
+    /* let vTPM handle any malformed request */
+    tpm_spapr_tpm_send(s);
+}
+
+static int tpm_spapr_do_crq(struct VIOsPAPRDevice *dev, uint8_t *crq_data)
+{
+    SPAPRvTPMState *s = VIO_SPAPR_VTPM_DEVICE(dev);
+    tpm_spapr_crq local_crq;
+    tpm_spapr_crq *crq = &s->crq; /* requests only */
+
+    memcpy(&local_crq.raw, crq_data, sizeof(local_crq.raw));
+
+    DPRINTF("VTPM: do_crq %02x %02x ...\n",
+            local_crq.raw[0], local_crq.raw[1]);
+
+    switch (local_crq.s.valid) {
+    case SPAPR_VTPM_VALID_INIT_CRQ_COMMAND: /* Init command/response */
+
+        /* Respond to initialization request */
+        switch (local_crq.s.msg) {
+        case SPAPR_VTPM_INIT_CRQ_RESULT:
+            DPRINTF("vtpm_do_crq: SPAPR_VTPM_INIT_CRQ_RESULT\n");
+            memset(local_crq.raw, 0, sizeof(local_crq.raw));
+            local_crq.s.valid = SPAPR_VTPM_VALID_INIT_CRQ_COMMAND;
+            local_crq.s.msg = SPAPR_VTPM_INIT_CRQ_RESULT;
+            spapr_vio_send_crq(dev, local_crq.raw);
+            break;
+
+        case SPAPR_VTPM_INIT_CRQ_COMPLETE_RESULT:
+            DPRINTF("vtpm_do_crq: SPAPR_VTPM_INIT_CRQ_COMP_RESULT\n");
+            memset(local_crq.raw, 0, sizeof(local_crq.raw));
+            local_crq.s.valid = SPAPR_VTPM_VALID_INIT_CRQ_COMMAND;
+            local_crq.s.msg = SPAPR_VTPM_INIT_CRQ_COMPLETE_RESULT;
+            spapr_vio_send_crq(dev, local_crq.raw);
+            break;
+        }
+
+        break;
+    case SPAPR_VTPM_VALID_COMMAND: /* Payloads */
+        switch (local_crq.s.msg) {
+        case SPAPR_VTPM_TPM_COMMAND:
+            DPRINTF("vtpm_do_crq: got TPM command payload!\n");
+            if (s->state == SPAPR_VTPM_STATE_EXECUTION)
+                return H_BUSY;
+            /* this crq is tracked */
+            memcpy(crq->raw, crq_data, sizeof(crq->raw));
+            crq->s.valid = be16_to_cpu(0);
+            crq->s.len = be16_to_cpu(crq->s.len);
+            crq->s.data = be32_to_cpu(crq->s.data);
+            tpm_spapr_got_payload(s, crq);
+            break;
+
+        case SPAPR_VTPM_GET_RTCE_BUFFER_SIZE:
+            DPRINTF("vtpm_do_crq: resp: buffer size is %zu\n",
+                    s->be_buffer_size);
+            local_crq.s.msg |= SPAPR_VTPM_MSG_RESULT;
+            local_crq.s.len = cpu_to_be16(s->be_buffer_size);
+            spapr_vio_send_crq(dev, local_crq.raw);
+            break;
+
+        case SPAPR_VTPM_GET_VERSION:
+            local_crq.s.msg |= SPAPR_VTPM_MSG_RESULT;
+            local_crq.s.len = cpu_to_be16(0);
+            switch (s->be_tpm_version) {
+            case TPM_VERSION_UNSPEC:
+                local_crq.s.data = cpu_to_be32(0);
+                break;
+            case TPM_VERSION_1_2:
+                local_crq.s.data = cpu_to_be32(1);
+                break;
+            case TPM_VERSION_2_0:
+                local_crq.s.data = cpu_to_be32(2);
+                break;
+            }
+            DPRINTF("vtpm_do_crq: resp: version %u\n",
+                    local_crq.s.data);
+            spapr_vio_send_crq(dev, local_crq.raw);
+            break;
+
+        case SPAPR_VTPM_PREPARE_TO_SUSPEND:
+            DPRINTF("vtpm_do_crq: resp: prep to suspend\n");
+            local_crq.s.msg |= SPAPR_VTPM_MSG_RESULT;
+            spapr_vio_send_crq(dev, local_crq.raw);
+            break;
+
+        default:
+            DPRINTF("vtpm_do_crq: Unknown message type %02x\n",
+                    crq->s.msg);
+        }
+        break;
+    default:
+        DPRINTF("vtpm_do_crq: unknown CRQ %02x %02x ...\n",
+                local_crq.raw[0], local_crq.raw[1]);
+    };
+
+    return 0;
+}
+
+static void tpm_spapr_request_completed(TPMIf *ti)
+{
+    SPAPRvTPMState *s = VIO_SPAPR_VTPM_DEVICE(ti);
+    tpm_spapr_crq *crq = &s->crq;
+    uint32_t len;
+    int rc;
+
+    tpm_spapr_show_buffer(s->buffer, sizeof(s->buffer), "spapr_vtpm: Rx TPM");
+
+    s->state = SPAPR_VTPM_STATE_COMPLETION;
+
+    /* a max. of be_buffer_size bytes can be transported */
+    len = MIN(tpm_cmd_get_size(s->buffer), s->be_buffer_size);
+    rc = spapr_vio_dma_write(&s->vdev, crq->s.data, s->buffer, len);
+
+    crq->s.valid = SPAPR_VTPM_MSG_RESULT;
+    crq->s.msg = SPAPR_VTPM_TPM_COMMAND | SPAPR_VTPM_MSG_RESULT;
+    crq->s.len = cpu_to_be16(len);
+    crq->s.data = cpu_to_be32(crq->s.data);
+
+    if (rc == 0) {
+        rc = spapr_vio_send_crq(&s->vdev, crq->raw);
+        if (rc) {
+            DPRINTF("%s: Error sending response\n", __func__);
+        }
+    } else {
+        DPRINTF("%s: Error with DMA write\n", __func__);
+    }
+}
+
+static int tpm_spapr_do_startup_tpm(SPAPRvTPMState *s, size_t buffersize)
+{
+    return tpm_backend_startup_tpm(s->be_driver, buffersize);
+}
+
+static void tpm_spapr_reset(VIOsPAPRDevice *dev)
+{
+    SPAPRvTPMState *s = VIO_SPAPR_VTPM_DEVICE(dev);
+
+    s->state = SPAPR_VTPM_STATE_NONE;
+
+    s->be_tpm_version = tpm_backend_get_tpm_version(s->be_driver);
+
+    s->be_buffer_size = MAX(ROUND_UP(tpm_backend_get_buffer_size(s->be_driver),
+                                     TARGET_PAGE_SIZE),
+                            sizeof(s->buffer));
+
+    tpm_backend_reset(s->be_driver);
+    tpm_spapr_do_startup_tpm(s, s->be_buffer_size);
+}
+
+static enum TPMVersion tpm_spapr_get_version(TPMIf *ti)
+{
+    SPAPRvTPMState *s = VIO_SPAPR_VTPM_DEVICE(ti);
+
+    if (tpm_backend_had_startup_error(s->be_driver)) {
+        return TPM_VERSION_UNSPEC;
+    }
+
+    return tpm_backend_get_tpm_version(s->be_driver);
+}
+
+static const VMStateDescription vmstate_spapr_vtpm = {
+    .name = "tpm_spapr",
+    .unmigratable = 1,
+};
+
+static Property tpm_spapr_properties[] = {
+    DEFINE_SPAPR_PROPERTIES(SPAPRvTPMState, vdev),
+    DEFINE_PROP_TPMBE("tpmdev", SPAPRvTPMState, be_driver),
+    DEFINE_PROP_END_OF_LIST(),
+};
+
+static void tpm_spapr_realizefn(VIOsPAPRDevice *dev, Error **errp)
+{
+    SPAPRvTPMState *s = VIO_SPAPR_VTPM_DEVICE(dev);
+
+    if (!tpm_find()) {
+        error_setg(errp, "at most one TPM device is permitted");
+        return;
+    }
+
+    dev->crq.SendFunc = tpm_spapr_do_crq;
+
+    if (!s->be_driver) {
+        error_setg(errp, "'tpmdev' property is required");
+        return;
+    }
+}
+
+static void tpm_spapr_class_init(ObjectClass *klass, void *data)
+{
+    DeviceClass *dc = DEVICE_CLASS(klass);
+    VIOsPAPRDeviceClass *k = VIO_SPAPR_DEVICE_CLASS(klass);
+    TPMIfClass *tc = TPM_IF_CLASS(klass);
+
+    k->realize = tpm_spapr_realizefn;
+    k->reset = tpm_spapr_reset;
+    //k->devnode = tpm_spapr_devnode;
+    k->dt_name = "vtpm";
+    k->dt_type = "IBM,vtpm";
+    k->dt_compatible = "IBM,vtpm";
+    k->signal_mask = 0x00000001;
+    set_bit(DEVICE_CATEGORY_MISC, dc->categories);
+    dc->props = tpm_spapr_properties;
+    k->rtce_window_size = 0x10000000;
+    dc->vmsd = &vmstate_spapr_vtpm;
+
+    tc->model = TPM_MODEL_TPM_SPAPR;
+    tc->get_version = tpm_spapr_get_version;
+    tc->request_completed = tpm_spapr_request_completed;
+}
+
+static const TypeInfo tpm_spapr_info = {
+    .name          = TYPE_TPM_SPAPR,
+    .parent        = TYPE_VIO_SPAPR_DEVICE,
+    .instance_size = sizeof(SPAPRvTPMState),
+    .class_init    = tpm_spapr_class_init,
+    .interfaces = (InterfaceInfo[]) {
+        { TYPE_TPM_IF },
+        { }
+    }
+};
+
+static void tpm_spapr_register_types(void)
+{
+    type_register_static(&tpm_spapr_info);
+}
+
+type_init(tpm_spapr_register_types)
diff --git a/include/sysemu/tpm.h b/include/sysemu/tpm.h
index 852e026..afefadd 100644
--- a/include/sysemu/tpm.h
+++ b/include/sysemu/tpm.h
@@ -46,9 +46,12 @@ typedef struct TPMIfClass {
 } TPMIfClass;
 
 #define TYPE_TPM_TIS                "tpm-tis"
+#define TYPE_TPM_SPAPR              "tpm-spapr"
 
 #define TPM_IS_TIS(chr)                             \
     object_dynamic_cast(OBJECT(chr), TYPE_TPM_TIS)
+#define TPM_IS_SPAPR(chr)                           \
+    object_dynamic_cast(OBJECT(chr), TYPE_TPM_SPAPR)
 
 /* returns NULL unless there is exactly one TPM device */
 static inline TPMIf *tpm_find(void)
diff --git a/qapi/tpm.json b/qapi/tpm.json
index 7093f26..dfa6a32 100644
--- a/qapi/tpm.json
+++ b/qapi/tpm.json
@@ -11,10 +11,11 @@
 # An enumeration of TPM models
 #
 # @tpm-tis: TPM TIS model
+# @tpm-spapr: TPM PAPR model (since 2.12)
 #
 # Since: 1.5
 ##
-{ 'enum': 'TpmModel', 'data': [ 'tpm-tis' ] }
+{ 'enum': 'TpmModel', 'data': [ 'tpm-tis', 'tpm-spapr' ] }
 
 ##
 # @query-tpm-models:
@@ -28,7 +29,7 @@
 # Example:
 #
 # -> { "execute": "query-tpm-models" }
-# <- { "return": [ "tpm-tis" ] }
+# <- { "return": [ "tpm-tis", "tpm-spapr" ] }
 #
 ##
 { 'command': 'query-tpm-models', 'returns': ['TpmModel'] }
-- 
2.5.5

Re: [Qemu-devel] [PATCH 1/2] tpm_spapr: Support TPM for ppc64 using CRQ based interface

[Cédric Le Goater]

Hello Stefan,

Some comments below. How do we populate the device tree ?

Thanks,

C.


On 12/05/2017 09:35 PM, Stefan Berger wrote:
> Implement support for TPM on ppc64 by implementing the vTPM CRQ
> interface as a frontend.
> 
> The Linux vTPM driver for ppc64 works with this emulation.
> 
> This emualtor also handles the TPM 2 case.
> 
> Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com>
> ---
>  hw/tpm/Makefile.objs |   1 +
>  hw/tpm/tpm_spapr.c   | 380 +++++++++++++++++++++++++++++++++++++++++++++++++++
>  include/sysemu/tpm.h |   3 +
>  qapi/tpm.json        |   5 +-
>  4 files changed, 387 insertions(+), 2 deletions(-)
>  create mode 100644 hw/tpm/tpm_spapr.c
> 
> diff --git a/hw/tpm/Makefile.objs b/hw/tpm/Makefile.objs
> index 41f0b7a..71ea63e 100644
> --- a/hw/tpm/Makefile.objs
> +++ b/hw/tpm/Makefile.objs
> @@ -1,3 +1,4 @@
>  common-obj-$(CONFIG_TPM_TIS) += tpm_tis.o
>  common-obj-$(CONFIG_TPM_PASSTHROUGH) += tpm_passthrough.o tpm_util.o
>  common-obj-$(CONFIG_TPM_EMULATOR) += tpm_emulator.o tpm_util.o
> +obj-$(CONFIG_PSERIES) += tpm_spapr.o
> diff --git a/hw/tpm/tpm_spapr.c b/hw/tpm/tpm_spapr.c
> new file mode 100644
> index 0000000..909aeeb
> --- /dev/null
> +++ b/hw/tpm/tpm_spapr.c
> @@ -0,0 +1,380 @@
> +/*
> + * QEMU PowerPC pSeries Logical Partition (aka sPAPR) hardware System Emulator
> + *
> + * PAPR Virtual TPM
> + *
> + * Copyright (c) 2015, 2017 IBM Corporation.
> + *
> + * Authors:
> + *    Stefan Berger <stefanb@linux.vnet.ibm.com>
> + *
> + *
> + * Permission is hereby granted, free of charge, to any person obtaining a copy
> + * of this software and associated documentation files (the "Software"), to deal
> + * in the Software without restriction, including without limitation the rights
> + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
> + * copies of the Software, and to permit persons to whom the Software is
> + * furnished to do so, subject to the following conditions:
> + *
> + * The above copyright notice and this permission notice shall be included in
> + * all copies or substantial portions of the Software.
> + *
> + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
> + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
> + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
> + * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
> + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
> + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
> + * THE SOFTWARE.

May be reduce a bit the header.

> + */
> +
> +#include "qemu/osdep.h"
> +#include "qapi/error.h"
> +
> +#include "sysemu/tpm_backend.h"
> +#include "tpm_int.h"
> +#include "tpm_util.h"
> +
> +#include "hw/ppc/spapr.h"
> +#include "hw/ppc/spapr_vio.h"
> +
> +#define DEBUG_SPAPR_VTPM 0
> +
> +#define DPRINTF(fmt, ...) do { \
> +    if (DEBUG_SPAPR_VTPM) { \
> +        printf(fmt, ## __VA_ARGS__); \
> +    } \
> +} while (0)

traces are prefered over printfs

> +#define VIO_SPAPR_VTPM_DEVICE(obj) \

I think you can trim the _DEVICE.

> +     OBJECT_CHECK(SPAPRvTPMState, (obj), TYPE_TPM_SPAPR)
> +
> +typedef struct vio_crq {

type definitions should always use CamelCase.

> +    uint8_t valid;  /* 0x80: cmd; 0xc0: init crq
> +                       0x81-0x83: CRQ message response */
> +    uint8_t msg;    /* see below */
> +    uint16_t len;   /* len of TPM request; len of TPM response */
> +    uint32_t data;  /* rtce_dma_handle when sending TPM request */
> +    uint64_t reserved;
> +} vio_crq;
> +
> +typedef union tpm_spapr_crq {

ditto.

> +    vio_crq s;
> +    uint8_t raw[sizeof(vio_crq)];
> +} tpm_spapr_crq;
> +
> +#define SPAPR_VTPM_VALID_INIT_CRQ_COMMAND  0xC0
> +#define SPAPR_VTPM_VALID_COMMAND           0x80
> +#define SPAPR_VTPM_MSG_RESULT              0x80
> +
> +/* msg types for valid = SPAPR_VTPM_VALID_INIT_CRQ */
> +#define SPAPR_VTPM_INIT_CRQ_RESULT           0x1
> +#define SPAPR_VTPM_INIT_CRQ_COMPLETE_RESULT  0x2
> +
> +/* msg types for valid = SPAPR_VTPM_VALID_CMD */
> +#define SPAPR_VTPM_GET_VERSION               0x1
> +#define SPAPR_VTPM_TPM_COMMAND               0x2
> +#define SPAPR_VTPM_GET_RTCE_BUFFER_SIZE      0x3
> +#define SPAPR_VTPM_PREPARE_TO_SUSPEND        0x4
> +
> +#define MAX_BUFFER_SIZE TARGET_PAGE_SIZE
> +
> +typedef struct {
> +    VIOsPAPRDevice vdev;
> +
> +    tpm_spapr_crq crq; /* track single TPM command */
> +
> +    uint8_t state;
> +#define SPAPR_VTPM_STATE_NONE         0
> +#define SPAPR_VTPM_STATE_EXECUTION    1
> +#define SPAPR_VTPM_STATE_COMPLETION   2
> +
> +    unsigned char buffer[MAX_BUFFER_SIZE];
> +
> +    TPMBackendCmd cmd;
> +
> +    TPMBackend *be_driver;
> +    TPMVersion be_tpm_version;
> +
> +    size_t be_buffer_size;
> +} SPAPRvTPMState;
> +
> +static void tpm_spapr_show_buffer(const unsigned char *buffer,
> +                                  size_t buffer_len, const char *string)
> +{
> +#if DEBUG_SPAPR_VTPM
> +    size_t i, len;
> +
> +    len = MIN(tpm_cmd_get_size(buffer), buffer_len);
> +    printf("spapr_vtpm: %s length = %zu\n", string, len);
> +    for (i = 0; i < len; i++) {
> +        if (i && !(i % 16)) {
> +            printf("\n");
> +        }
> +        printf("%.2X ", buffer[i]);
> +    }
> +    printf("\n");
> +#endif
> +}
> +
> +/*
> + * Send a request to the TPM.
> + */
> +static void tpm_spapr_tpm_send(SPAPRvTPMState *s)
> +{
> +    tpm_spapr_show_buffer(s->buffer, sizeof(s->buffer), "spapr_vtpm: Tx TPM");
> +
> +    s->state = SPAPR_VTPM_STATE_EXECUTION;
> +    s->cmd = (TPMBackendCmd) {
> +        .locty = 0,
> +        .in = s->buffer,
> +        .in_len = MIN(tpm_cmd_get_size(s->buffer), sizeof(s->buffer)),
> +        .out = s->buffer,
> +        .out_len = sizeof(s->buffer),
> +    };
> +
> +    tpm_backend_deliver_request(s->be_driver, &s->cmd);
> +}
> +
> +static void tpm_spapr_got_payload(SPAPRvTPMState *s, tpm_spapr_crq *crq)
> +{
> +    long rc;
> +    DPRINTF("tpm_spapr_got_payload: crq->s.data = 0x%x  crq->s.len = %d\n",
> +            crq->s.data, crq->s.len);
> +
> +    /* a max. of be_buffer_size bytes can be transported */
> +    rc = spapr_vio_dma_read(&s->vdev, crq->s.data,
> +                            s->buffer, s->be_buffer_size);
> +    if (rc) {
> +        fprintf(stderr, "tpm_spapr_got_payload: DMA read failure !\n");

may be use error_report ? or error_setg()

> +    }
> +
> +    /* let vTPM handle any malformed request */
> +    tpm_spapr_tpm_send(s);

why not return rc ? tpm_spapr_do_crq() is a VIO 'crq.SendFunc' handler
which returns hcall errors. 

> +}
> +
> +static int tpm_spapr_do_crq(struct VIOsPAPRDevice *dev, uint8_t *crq_data)
> +{
> +    SPAPRvTPMState *s = VIO_SPAPR_VTPM_DEVICE(dev);
> +    tpm_spapr_crq local_crq;
> +    tpm_spapr_crq *crq = &s->crq; /* requests only */
> +
> +    memcpy(&local_crq.raw, crq_data, sizeof(local_crq.raw));
> +
> +    DPRINTF("VTPM: do_crq %02x %02x ...\n",
> +            local_crq.raw[0], local_crq.raw[1]);
> +
> +    switch (local_crq.s.valid) {
> +    case SPAPR_VTPM_VALID_INIT_CRQ_COMMAND: /* Init command/response */
> +
> +        /* Respond to initialization request */
> +        switch (local_crq.s.msg) {
> +        case SPAPR_VTPM_INIT_CRQ_RESULT:
> +            DPRINTF("vtpm_do_crq: SPAPR_VTPM_INIT_CRQ_RESULT\n");
> +            memset(local_crq.raw, 0, sizeof(local_crq.raw));
> +            local_crq.s.valid = SPAPR_VTPM_VALID_INIT_CRQ_COMMAND;
> +            local_crq.s.msg = SPAPR_VTPM_INIT_CRQ_RESULT;
> +            spapr_vio_send_crq(dev, local_crq.raw);
> +            break;
> +
> +        case SPAPR_VTPM_INIT_CRQ_COMPLETE_RESULT:
> +            DPRINTF("vtpm_do_crq: SPAPR_VTPM_INIT_CRQ_COMP_RESULT\n");
> +            memset(local_crq.raw, 0, sizeof(local_crq.raw));
> +            local_crq.s.valid = SPAPR_VTPM_VALID_INIT_CRQ_COMMAND;
> +            local_crq.s.msg = SPAPR_VTPM_INIT_CRQ_COMPLETE_RESULT;
> +            spapr_vio_send_crq(dev, local_crq.raw);
> +            break;
> +        }
> +
> +        break;
> +    case SPAPR_VTPM_VALID_COMMAND: /* Payloads */
> +        switch (local_crq.s.msg) {
> +        case SPAPR_VTPM_TPM_COMMAND:
> +            DPRINTF("vtpm_do_crq: got TPM command payload!\n");
> +            if (s->state == SPAPR_VTPM_STATE_EXECUTION)
> +                return H_BUSY;
> +            /* this crq is tracked */
> +            memcpy(crq->raw, crq_data, sizeof(crq->raw));
> +            crq->s.valid = be16_to_cpu(0);
> +            crq->s.len = be16_to_cpu(crq->s.len);
> +            crq->s.data = be32_to_cpu(crq->s.data);
> +            tpm_spapr_got_payload(s, crq);
> +            break;
> +
> +        case SPAPR_VTPM_GET_RTCE_BUFFER_SIZE:
> +            DPRINTF("vtpm_do_crq: resp: buffer size is %zu\n",
> +                    s->be_buffer_size);
> +            local_crq.s.msg |= SPAPR_VTPM_MSG_RESULT;
> +            local_crq.s.len = cpu_to_be16(s->be_buffer_size);
> +            spapr_vio_send_crq(dev, local_crq.raw);
> +            break;
> +
> +        case SPAPR_VTPM_GET_VERSION:
> +            local_crq.s.msg |= SPAPR_VTPM_MSG_RESULT;
> +            local_crq.s.len = cpu_to_be16(0);
> +            switch (s->be_tpm_version) {
> +            case TPM_VERSION_UNSPEC:
> +                local_crq.s.data = cpu_to_be32(0);
> +                break;
> +            case TPM_VERSION_1_2:
> +                local_crq.s.data = cpu_to_be32(1);
> +                break;
> +            case TPM_VERSION_2_0:
> +                local_crq.s.data = cpu_to_be32(2);
> +                break;
> +            }
> +            DPRINTF("vtpm_do_crq: resp: version %u\n",
> +                    local_crq.s.data);
> +            spapr_vio_send_crq(dev, local_crq.raw);
> +            break;
> +
> +        case SPAPR_VTPM_PREPARE_TO_SUSPEND:
> +            DPRINTF("vtpm_do_crq: resp: prep to suspend\n");
> +            local_crq.s.msg |= SPAPR_VTPM_MSG_RESULT;
> +            spapr_vio_send_crq(dev, local_crq.raw);
> +            break;
> +
> +        default:
> +            DPRINTF("vtpm_do_crq: Unknown message type %02x\n",
> +                    crq->s.msg);
> +        }
> +        break;
> +    default:
> +        DPRINTF("vtpm_do_crq: unknown CRQ %02x %02x ...\n",
> +                local_crq.raw[0], local_crq.raw[1]);
> +    };
> +
> +    return 0;

shouldn't it be H_SUCCESS.

> +}
> +
> +static void tpm_spapr_request_completed(TPMIf *ti)
> +{
> +    SPAPRvTPMState *s = VIO_SPAPR_VTPM_DEVICE(ti);
> +    tpm_spapr_crq *crq = &s->crq;
> +    uint32_t len;
> +    int rc;
> +
> +    tpm_spapr_show_buffer(s->buffer, sizeof(s->buffer), "spapr_vtpm: Rx TPM");
> +
> +    s->state = SPAPR_VTPM_STATE_COMPLETION;
> +
> +    /* a max. of be_buffer_size bytes can be transported */
> +    len = MIN(tpm_cmd_get_size(s->buffer), s->be_buffer_size);
> +    rc = spapr_vio_dma_write(&s->vdev, crq->s.data, s->buffer, len);
> +
> +    crq->s.valid = SPAPR_VTPM_MSG_RESULT;
> +    crq->s.msg = SPAPR_VTPM_TPM_COMMAND | SPAPR_VTPM_MSG_RESULT;
> +    crq->s.len = cpu_to_be16(len);
> +    crq->s.data = cpu_to_be32(crq->s.data);
> +
> +    if (rc == 0) {
> +        rc = spapr_vio_send_crq(&s->vdev, crq->raw);
> +        if (rc) {
> +            DPRINTF("%s: Error sending response\n", __func__);
> +        }
> +    } else {
> +        DPRINTF("%s: Error with DMA write\n", __func__);
> +    }

These DPRINTF look like errors to me.

> +}
> +
> +static int tpm_spapr_do_startup_tpm(SPAPRvTPMState *s, size_t buffersize)
> +{
> +    return tpm_backend_startup_tpm(s->be_driver, buffersize);
> +}
> +
> +static void tpm_spapr_reset(VIOsPAPRDevice *dev)
> +{
> +    SPAPRvTPMState *s = VIO_SPAPR_VTPM_DEVICE(dev);
> +
> +    s->state = SPAPR_VTPM_STATE_NONE;
> +
> +    s->be_tpm_version = tpm_backend_get_tpm_version(s->be_driver);
> +
> +    s->be_buffer_size = MAX(ROUND_UP(tpm_backend_get_buffer_size(s->be_driver),
> +                                     TARGET_PAGE_SIZE),
> +                            sizeof(s->buffer));
> +
> +    tpm_backend_reset(s->be_driver);
> +    tpm_spapr_do_startup_tpm(s, s->be_buffer_size);
> +}
> +
> +static enum TPMVersion tpm_spapr_get_version(TPMIf *ti)
> +{
> +    SPAPRvTPMState *s = VIO_SPAPR_VTPM_DEVICE(ti);
> +
> +    if (tpm_backend_had_startup_error(s->be_driver)) {
> +        return TPM_VERSION_UNSPEC;
> +    }
> +
> +    return tpm_backend_get_tpm_version(s->be_driver);
> +}
> +
> +static const VMStateDescription vmstate_spapr_vtpm = {
> +    .name = "tpm_spapr",
> +    .unmigratable = 1,
> +};
> +
> +static Property tpm_spapr_properties[] = {
> +    DEFINE_SPAPR_PROPERTIES(SPAPRvTPMState, vdev),
> +    DEFINE_PROP_TPMBE("tpmdev", SPAPRvTPMState, be_driver),
> +    DEFINE_PROP_END_OF_LIST(),
> +};
> +
> +static void tpm_spapr_realizefn(VIOsPAPRDevice *dev, Error **errp)
> +{
> +    SPAPRvTPMState *s = VIO_SPAPR_VTPM_DEVICE(dev);
> +
> +    if (!tpm_find()) {
> +        error_setg(errp, "at most one TPM device is permitted");
> +        return;
> +    }
>
tpm_find() does not exist anymore. It was replaced by tpm_get_version()
AFAICT in commit 5cb18b3d7bff.

> +    dev->crq.SendFunc = tpm_spapr_do_crq;
> +
> +    if (!s->be_driver) {
> +        error_setg(errp, "'tpmdev' property is required");
> +        return;
> +    }
> +
> +}
> +
> +static void tpm_spapr_class_init(ObjectClass *klass, void *data)
> +{
> +    DeviceClass *dc = DEVICE_CLASS(klass);
> +    VIOsPAPRDeviceClass *k = VIO_SPAPR_DEVICE_CLASS(klass);
> +    TPMIfClass *tc = TPM_IF_CLASS(klass);
> +
> +    k->realize = tpm_spapr_realizefn;
> +    k->reset = tpm_spapr_reset;
> +    //k->devnode = tpm_spapr_devnode;
> +    k->dt_name = "vtpm";
> +    k->dt_type = "IBM,vtpm";
> +    k->dt_compatible = "IBM,vtpm";
> +    k->signal_mask = 0x00000001;
> +    set_bit(DEVICE_CATEGORY_MISC, dc->categories);
> +    dc->props = tpm_spapr_properties;
> +    k->rtce_window_size = 0x10000000;
> +    dc->vmsd = &vmstate_spapr_vtpm;
> +
> +    tc->model = TPM_MODEL_TPM_SPAPR;
> +    tc->get_version = tpm_spapr_get_version;
> +    tc->request_completed = tpm_spapr_request_completed;
> +}
> +
> +static const TypeInfo tpm_spapr_info = {
> +    .name          = TYPE_TPM_SPAPR,
> +    .parent        = TYPE_VIO_SPAPR_DEVICE,
> +    .instance_size = sizeof(SPAPRvTPMState),
> +    .class_init    = tpm_spapr_class_init,
> +    .interfaces = (InterfaceInfo[]) {
> +        { TYPE_TPM_IF },
> +        { }
> +    }
> +};
> +
> +static void tpm_spapr_register_types(void)
> +{
> +    type_register_static(&tpm_spapr_info);
> +}
> +
> +type_init(tpm_spapr_register_types)
> diff --git a/include/sysemu/tpm.h b/include/sysemu/tpm.h
> index 852e026..afefadd 100644
> --- a/include/sysemu/tpm.h
> +++ b/include/sysemu/tpm.h
> @@ -46,9 +46,12 @@ typedef struct TPMIfClass {
>  } TPMIfClass;
>  
>  #define TYPE_TPM_TIS                "tpm-tis"
> +#define TYPE_TPM_SPAPR              "tpm-spapr"
>  
>  #define TPM_IS_TIS(chr)                             \
>      object_dynamic_cast(OBJECT(chr), TYPE_TPM_TIS)
> +#define TPM_IS_SPAPR(chr)                           \
> +    object_dynamic_cast(OBJECT(chr), TYPE_TPM_SPAPR)
>  
>  /* returns NULL unless there is exactly one TPM device */
>  static inline TPMIf *tpm_find(void)
> diff --git a/qapi/tpm.json b/qapi/tpm.json
> index 7093f26..dfa6a32 100644
> --- a/qapi/tpm.json
> +++ b/qapi/tpm.json
> @@ -11,10 +11,11 @@
>  # An enumeration of TPM models
>  #
>  # @tpm-tis: TPM TIS model
> +# @tpm-spapr: TPM PAPR model (since 2.12)
>  #
>  # Since: 1.5
>  ##
> -{ 'enum': 'TpmModel', 'data': [ 'tpm-tis' ] }
> +{ 'enum': 'TpmModel', 'data': [ 'tpm-tis', 'tpm-spapr' ] }
>  
>  ##
>  # @query-tpm-models:
> @@ -28,7 +29,7 @@
>  # Example:
>  #
>  # -> { "execute": "query-tpm-models" }
> -# <- { "return": [ "tpm-tis" ] }
> +# <- { "return": [ "tpm-tis", "tpm-spapr" ] }
>  #
>  ##
>  { 'command': 'query-tpm-models', 'returns': ['TpmModel'] }
> 

Re: [Qemu-devel] [PATCH 1/2] tpm_spapr: Support TPM for ppc64 using CRQ based interface

[Stefan Berger]

On 12/06/2017 02:26 AM, Cédric Le Goater wrote:
> Hello Stefan,
>
> Some comments below. How do we populate the device tree ?

Patched SLOF.


>
> Thanks,

Thanks for the review. I will process the comments. I have some 
responses below.

One thing I wasn't sure about is this here:

//k->devnode = tpm_spapr_devnode;


Is a function for this needed? If not, I will remove.


>
> C.
>
>
> On 12/05/2017 09:35 PM, Stefan Berger wrote:
>> Implement support for TPM on ppc64 by implementing the vTPM CRQ
>> interface as a frontend.
>>
>> The Linux vTPM driver for ppc64 works with this emulation.
>>
>> This emualtor also handles the TPM 2 case.
>>
>> Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com>
>> ---
>>   hw/tpm/Makefile.objs |   1 +
>>   hw/tpm/tpm_spapr.c   | 380 +++++++++++++++++++++++++++++++++++++++++++++++++++
>>   include/sysemu/tpm.h |   3 +
>>   qapi/tpm.json        |   5 +-
>>   4 files changed, 387 insertions(+), 2 deletions(-)
>>   create mode 100644 hw/tpm/tpm_spapr.c
>>
>> diff --git a/hw/tpm/Makefile.objs b/hw/tpm/Makefile.objs
>> index 41f0b7a..71ea63e 100644
>> --- a/hw/tpm/Makefile.objs
>> +++ b/hw/tpm/Makefile.objs
>> @@ -1,3 +1,4 @@
>>   common-obj-$(CONFIG_TPM_TIS) += tpm_tis.o
>>   common-obj-$(CONFIG_TPM_PASSTHROUGH) += tpm_passthrough.o tpm_util.o
>>   common-obj-$(CONFIG_TPM_EMULATOR) += tpm_emulator.o tpm_util.o
>> +obj-$(CONFIG_PSERIES) += tpm_spapr.o
>> diff --git a/hw/tpm/tpm_spapr.c b/hw/tpm/tpm_spapr.c
>> new file mode 100644
>> index 0000000..909aeeb
>> --- /dev/null
>> +++ b/hw/tpm/tpm_spapr.c
>> @@ -0,0 +1,380 @@
>> +/*
>> + * QEMU PowerPC pSeries Logical Partition (aka sPAPR) hardware System Emulator
>> + *
>> + * PAPR Virtual TPM
>> + *
>> + * Copyright (c) 2015, 2017 IBM Corporation.
>> + *
>> + * Authors:
>> + *    Stefan Berger <stefanb@linux.vnet.ibm.com>
>> + *
>> + *
>> + * Permission is hereby granted, free of charge, to any person obtaining a copy
>> + * of this software and associated documentation files (the "Software"), to deal
>> + * in the Software without restriction, including without limitation the rights
>> + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
>> + * copies of the Software, and to permit persons to whom the Software is
>> + * furnished to do so, subject to the following conditions:
>> + *
>> + * The above copyright notice and this permission notice shall be included in
>> + * all copies or substantial portions of the Software.
>> + *
>> + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
>> + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
>> + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
>> + * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
>> + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
>> + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
>> + * THE SOFTWARE.
> May be reduce a bit the header.

Which part? I derived the header from spapr_vscsi.c ...

>
>> + */
>> +
>> +#include "qemu/osdep.h"
>> +#include "qapi/error.h"
>> +
>> +#include "sysemu/tpm_backend.h"
>> +#include "tpm_int.h"
>> +#include "tpm_util.h"
>> +
>> +#include "hw/ppc/spapr.h"
>> +#include "hw/ppc/spapr_vio.h"
>> +
>> +#define DEBUG_SPAPR_VTPM 0
>> +
>> +#define DPRINTF(fmt, ...) do { \
>> +    if (DEBUG_SPAPR_VTPM) { \
>> +        printf(fmt, ## __VA_ARGS__); \
>> +    } \
>> +} while (0)
> traces are prefered over printfs
>
>> +#define VIO_SPAPR_VTPM_DEVICE(obj) \
> I think you can trim the _DEVICE

Not sure what you mean.

> .
>
>> +     OBJECT_CHECK(SPAPRvTPMState, (obj), TYPE_TPM_SPAPR)
>> +
>> +typedef struct vio_crq {
> type definitions should always use CamelCase.

Will fix. Derived from vscsi...

>
>> +    uint8_t valid;  /* 0x80: cmd; 0xc0: init crq
>> +                       0x81-0x83: CRQ message response */
>> +    uint8_t msg;    /* see below */
>> +    uint16_t len;   /* len of TPM request; len of TPM response */
>> +    uint32_t data;  /* rtce_dma_handle when sending TPM request */
>> +    uint64_t reserved;
>> +} vio_crq;
>> +
>> +typedef union tpm_spapr_crq {
> ditto.
>
>> +    vio_crq s;
>> +    uint8_t raw[sizeof(vio_crq)];
>> +} tpm_spapr_crq;
>> +
>> +#define SPAPR_VTPM_VALID_INIT_CRQ_COMMAND  0xC0
>> +#define SPAPR_VTPM_VALID_COMMAND           0x80
>> +#define SPAPR_VTPM_MSG_RESULT              0x80
>> +
>> +/* msg types for valid = SPAPR_VTPM_VALID_INIT_CRQ */
>> +#define SPAPR_VTPM_INIT_CRQ_RESULT           0x1
>> +#define SPAPR_VTPM_INIT_CRQ_COMPLETE_RESULT  0x2
>> +
>> +/* msg types for valid = SPAPR_VTPM_VALID_CMD */
>> +#define SPAPR_VTPM_GET_VERSION               0x1
>> +#define SPAPR_VTPM_TPM_COMMAND               0x2
>> +#define SPAPR_VTPM_GET_RTCE_BUFFER_SIZE      0x3
>> +#define SPAPR_VTPM_PREPARE_TO_SUSPEND        0x4
>> +
>> +#define MAX_BUFFER_SIZE TARGET_PAGE_SIZE
>> +
>> +typedef struct {
>> +    VIOsPAPRDevice vdev;
>> +
>> +    tpm_spapr_crq crq; /* track single TPM command */
>> +
>> +    uint8_t state;
>> +#define SPAPR_VTPM_STATE_NONE         0
>> +#define SPAPR_VTPM_STATE_EXECUTION    1
>> +#define SPAPR_VTPM_STATE_COMPLETION   2
>> +
>> +    unsigned char buffer[MAX_BUFFER_SIZE];
>> +
>> +    TPMBackendCmd cmd;
>> +
>> +    TPMBackend *be_driver;
>> +    TPMVersion be_tpm_version;
>> +
>> +    size_t be_buffer_size;
>> +} SPAPRvTPMState;
>> +
>> +static void tpm_spapr_show_buffer(const unsigned char *buffer,
>> +                                  size_t buffer_len, const char *string)
>> +{
>> +#if DEBUG_SPAPR_VTPM
>> +    size_t i, len;
>> +
>> +    len = MIN(tpm_cmd_get_size(buffer), buffer_len);
>> +    printf("spapr_vtpm: %s length = %zu\n", string, len);
>> +    for (i = 0; i < len; i++) {
>> +        if (i && !(i % 16)) {
>> +            printf("\n");
>> +        }
>> +        printf("%.2X ", buffer[i]);
>> +    }
>> +    printf("\n");
>> +#endif
>> +}
>> +
>> +/*
>> + * Send a request to the TPM.
>> + */
>> +static void tpm_spapr_tpm_send(SPAPRvTPMState *s)
>> +{
>> +    tpm_spapr_show_buffer(s->buffer, sizeof(s->buffer), "spapr_vtpm: Tx TPM");
>> +
>> +    s->state = SPAPR_VTPM_STATE_EXECUTION;
>> +    s->cmd = (TPMBackendCmd) {
>> +        .locty = 0,
>> +        .in = s->buffer,
>> +        .in_len = MIN(tpm_cmd_get_size(s->buffer), sizeof(s->buffer)),
>> +        .out = s->buffer,
>> +        .out_len = sizeof(s->buffer),
>> +    };
>> +
>> +    tpm_backend_deliver_request(s->be_driver, &s->cmd);
>> +}
>> +
>> +static void tpm_spapr_got_payload(SPAPRvTPMState *s, tpm_spapr_crq *crq)
>> +{
>> +    long rc;
>> +    DPRINTF("tpm_spapr_got_payload: crq->s.data = 0x%x  crq->s.len = %d\n",
>> +            crq->s.data, crq->s.len);
>> +
>> +    /* a max. of be_buffer_size bytes can be transported */
>> +    rc = spapr_vio_dma_read(&s->vdev, crq->s.data,
>> +                            s->buffer, s->be_buffer_size);
>> +    if (rc) {
>> +        fprintf(stderr, "tpm_spapr_got_payload: DMA read failure !\n");
> may be use error_report ? or error_setg()
>
>> +    }
>> +
>> +    /* let vTPM handle any malformed request */
>> +    tpm_spapr_tpm_send(s);
> why not return rc ? tpm_spapr_do_crq() is a VIO 'crq.SendFunc' handler
> which returns hcall errors.
>
>> +}
>> +
>> +static int tpm_spapr_do_crq(struct VIOsPAPRDevice *dev, uint8_t *crq_data)
>> +{
>> +    SPAPRvTPMState *s = VIO_SPAPR_VTPM_DEVICE(dev);
>> +    tpm_spapr_crq local_crq;
>> +    tpm_spapr_crq *crq = &s->crq; /* requests only */
>> +
>> +    memcpy(&local_crq.raw, crq_data, sizeof(local_crq.raw));
>> +
>> +    DPRINTF("VTPM: do_crq %02x %02x ...\n",
>> +            local_crq.raw[0], local_crq.raw[1]);
>> +
>> +    switch (local_crq.s.valid) {
>> +    case SPAPR_VTPM_VALID_INIT_CRQ_COMMAND: /* Init command/response */
>> +
>> +        /* Respond to initialization request */
>> +        switch (local_crq.s.msg) {
>> +        case SPAPR_VTPM_INIT_CRQ_RESULT:
>> +            DPRINTF("vtpm_do_crq: SPAPR_VTPM_INIT_CRQ_RESULT\n");
>> +            memset(local_crq.raw, 0, sizeof(local_crq.raw));
>> +            local_crq.s.valid = SPAPR_VTPM_VALID_INIT_CRQ_COMMAND;
>> +            local_crq.s.msg = SPAPR_VTPM_INIT_CRQ_RESULT;
>> +            spapr_vio_send_crq(dev, local_crq.raw);
>> +            break;
>> +
>> +        case SPAPR_VTPM_INIT_CRQ_COMPLETE_RESULT:
>> +            DPRINTF("vtpm_do_crq: SPAPR_VTPM_INIT_CRQ_COMP_RESULT\n");
>> +            memset(local_crq.raw, 0, sizeof(local_crq.raw));
>> +            local_crq.s.valid = SPAPR_VTPM_VALID_INIT_CRQ_COMMAND;
>> +            local_crq.s.msg = SPAPR_VTPM_INIT_CRQ_COMPLETE_RESULT;
>> +            spapr_vio_send_crq(dev, local_crq.raw);
>> +            break;
>> +        }
>> +
>> +        break;
>> +    case SPAPR_VTPM_VALID_COMMAND: /* Payloads */
>> +        switch (local_crq.s.msg) {
>> +        case SPAPR_VTPM_TPM_COMMAND:
>> +            DPRINTF("vtpm_do_crq: got TPM command payload!\n");
>> +            if (s->state == SPAPR_VTPM_STATE_EXECUTION)
>> +                return H_BUSY;
>> +            /* this crq is tracked */
>> +            memcpy(crq->raw, crq_data, sizeof(crq->raw));
>> +            crq->s.valid = be16_to_cpu(0);
>> +            crq->s.len = be16_to_cpu(crq->s.len);
>> +            crq->s.data = be32_to_cpu(crq->s.data);
>> +            tpm_spapr_got_payload(s, crq);
>> +            break;
>> +
>> +        case SPAPR_VTPM_GET_RTCE_BUFFER_SIZE:
>> +            DPRINTF("vtpm_do_crq: resp: buffer size is %zu\n",
>> +                    s->be_buffer_size);
>> +            local_crq.s.msg |= SPAPR_VTPM_MSG_RESULT;
>> +            local_crq.s.len = cpu_to_be16(s->be_buffer_size);
>> +            spapr_vio_send_crq(dev, local_crq.raw);
>> +            break;
>> +
>> +        case SPAPR_VTPM_GET_VERSION:
>> +            local_crq.s.msg |= SPAPR_VTPM_MSG_RESULT;
>> +            local_crq.s.len = cpu_to_be16(0);
>> +            switch (s->be_tpm_version) {
>> +            case TPM_VERSION_UNSPEC:
>> +                local_crq.s.data = cpu_to_be32(0);
>> +                break;
>> +            case TPM_VERSION_1_2:
>> +                local_crq.s.data = cpu_to_be32(1);
>> +                break;
>> +            case TPM_VERSION_2_0:
>> +                local_crq.s.data = cpu_to_be32(2);
>> +                break;
>> +            }
>> +            DPRINTF("vtpm_do_crq: resp: version %u\n",
>> +                    local_crq.s.data);
>> +            spapr_vio_send_crq(dev, local_crq.raw);
>> +            break;
>> +
>> +        case SPAPR_VTPM_PREPARE_TO_SUSPEND:
>> +            DPRINTF("vtpm_do_crq: resp: prep to suspend\n");
>> +            local_crq.s.msg |= SPAPR_VTPM_MSG_RESULT;
>> +            spapr_vio_send_crq(dev, local_crq.raw);
>> +            break;
>> +
>> +        default:
>> +            DPRINTF("vtpm_do_crq: Unknown message type %02x\n",
>> +                    crq->s.msg);
>> +        }
>> +        break;
>> +    default:
>> +        DPRINTF("vtpm_do_crq: unknown CRQ %02x %02x ...\n",
>> +                local_crq.raw[0], local_crq.raw[1]);
>> +    };
>> +
>> +    return 0;
> shouldn't it be H_SUCCESS.

True. Will fix.

>
>> +}
>> +
>> +static void tpm_spapr_request_completed(TPMIf *ti)
>> +{
>> +    SPAPRvTPMState *s = VIO_SPAPR_VTPM_DEVICE(ti);
>> +    tpm_spapr_crq *crq = &s->crq;
>> +    uint32_t len;
>> +    int rc;
>> +
>> +    tpm_spapr_show_buffer(s->buffer, sizeof(s->buffer), "spapr_vtpm: Rx TPM");
>> +
>> +    s->state = SPAPR_VTPM_STATE_COMPLETION;
>> +
>> +    /* a max. of be_buffer_size bytes can be transported */
>> +    len = MIN(tpm_cmd_get_size(s->buffer), s->be_buffer_size);
>> +    rc = spapr_vio_dma_write(&s->vdev, crq->s.data, s->buffer, len);
>> +
>> +    crq->s.valid = SPAPR_VTPM_MSG_RESULT;
>> +    crq->s.msg = SPAPR_VTPM_TPM_COMMAND | SPAPR_VTPM_MSG_RESULT;
>> +    crq->s.len = cpu_to_be16(len);
>> +    crq->s.data = cpu_to_be32(crq->s.data);
>> +
>> +    if (rc == 0) {
>> +        rc = spapr_vio_send_crq(&s->vdev, crq->raw);
>> +        if (rc) {
>> +            DPRINTF("%s: Error sending response\n", __func__);
>> +        }
>> +    } else {
>> +        DPRINTF("%s: Error with DMA write\n", __func__);
>> +    }
> These DPRINTF look like errors to me.

Will convert to error_report()

>
>> +}
>> +
>> +static int tpm_spapr_do_startup_tpm(SPAPRvTPMState *s, size_t buffersize)
>> +{
>> +    return tpm_backend_startup_tpm(s->be_driver, buffersize);
>> +}
>> +
>> +static void tpm_spapr_reset(VIOsPAPRDevice *dev)
>> +{
>> +    SPAPRvTPMState *s = VIO_SPAPR_VTPM_DEVICE(dev);
>> +
>> +    s->state = SPAPR_VTPM_STATE_NONE;
>> +
>> +    s->be_tpm_version = tpm_backend_get_tpm_version(s->be_driver);
>> +
>> +    s->be_buffer_size = MAX(ROUND_UP(tpm_backend_get_buffer_size(s->be_driver),
>> +                                     TARGET_PAGE_SIZE),
>> +                            sizeof(s->buffer));
>> +
>> +    tpm_backend_reset(s->be_driver);
>> +    tpm_spapr_do_startup_tpm(s, s->be_buffer_size);
>> +}
>> +
>> +static enum TPMVersion tpm_spapr_get_version(TPMIf *ti)
>> +{
>> +    SPAPRvTPMState *s = VIO_SPAPR_VTPM_DEVICE(ti);
>> +
>> +    if (tpm_backend_had_startup_error(s->be_driver)) {
>> +        return TPM_VERSION_UNSPEC;
>> +    }
>> +
>> +    return tpm_backend_get_tpm_version(s->be_driver);
>> +}
>> +
>> +static const VMStateDescription vmstate_spapr_vtpm = {
>> +    .name = "tpm_spapr",
>> +    .unmigratable = 1,
>> +};
>> +
>> +static Property tpm_spapr_properties[] = {
>> +    DEFINE_SPAPR_PROPERTIES(SPAPRvTPMState, vdev),
>> +    DEFINE_PROP_TPMBE("tpmdev", SPAPRvTPMState, be_driver),
>> +    DEFINE_PROP_END_OF_LIST(),
>> +};
>> +
>> +static void tpm_spapr_realizefn(VIOsPAPRDevice *dev, Error **errp)
>> +{
>> +    SPAPRvTPMState *s = VIO_SPAPR_VTPM_DEVICE(dev);
>> +
>> +    if (!tpm_find()) {
>> +        error_setg(errp, "at most one TPM device is permitted");
>> +        return;
>> +    }
>>
> tpm_find() does not exist anymore. It was replaced by tpm_get_version()
> AFAICT in commit 5cb18b3d7bff.

tpm_find() will be introduced here : 
https://github.com/stefanberger/qemu-tpm/commit/9d49eb48c8dc46fede713d5d1b3525b43686a692

>
>> +    dev->crq.SendFunc = tpm_spapr_do_crq;
>> +
>> +    if (!s->be_driver) {
>> +        error_setg(errp, "'tpmdev' property is required");
>> +        return;
>> +    }
>> +
>> +}
>> +
>> +static void tpm_spapr_class_init(ObjectClass *klass, void *data)
>> +{
>> +    DeviceClass *dc = DEVICE_CLASS(klass);
>> +    VIOsPAPRDeviceClass *k = VIO_SPAPR_DEVICE_CLASS(klass);
>> +    TPMIfClass *tc = TPM_IF_CLASS(klass);
>> +
>> +    k->realize = tpm_spapr_realizefn;
>> +    k->reset = tpm_spapr_reset;
>> +    //k->devnode = tpm_spapr_devnode;

I would remove this unless this is needed. Wasn't sure.


>> +    k->dt_name = "vtpm";
>> +    k->dt_type = "IBM,vtpm";
>> +    k->dt_compatible = "IBM,vtpm";
>> +    k->signal_mask = 0x00000001;
>> +    set_bit(DEVICE_CATEGORY_MISC, dc->categories);
>> +    dc->props = tpm_spapr_properties;
>> +    k->rtce_window_size = 0x10000000;
>> +    dc->vmsd = &vmstate_spapr_vtpm;
>> +
>> +    tc->model = TPM_MODEL_TPM_SPAPR;
>> +    tc->get_version = tpm_spapr_get_version;
>> +    tc->request_completed = tpm_spapr_request_completed;
>> +}
>> +
>> +static const TypeInfo tpm_spapr_info = {
>> +    .name          = TYPE_TPM_SPAPR,
>> +    .parent        = TYPE_VIO_SPAPR_DEVICE,
>> +    .instance_size = sizeof(SPAPRvTPMState),
>> +    .class_init    = tpm_spapr_class_init,
>> +    .interfaces = (InterfaceInfo[]) {
>> +        { TYPE_TPM_IF },
>> +        { }
>> +    }
>> +};
>> +
>> +static void tpm_spapr_register_types(void)
>> +{
>> +    type_register_static(&tpm_spapr_info);
>> +}
>> +
>> +type_init(tpm_spapr_register_types)
>> diff --git a/include/sysemu/tpm.h b/include/sysemu/tpm.h
>> index 852e026..afefadd 100644
>> --- a/include/sysemu/tpm.h
>> +++ b/include/sysemu/tpm.h
>> @@ -46,9 +46,12 @@ typedef struct TPMIfClass {
>>   } TPMIfClass;
>>   
>>   #define TYPE_TPM_TIS                "tpm-tis"
>> +#define TYPE_TPM_SPAPR              "tpm-spapr"
>>   
>>   #define TPM_IS_TIS(chr)                             \
>>       object_dynamic_cast(OBJECT(chr), TYPE_TPM_TIS)
>> +#define TPM_IS_SPAPR(chr)                           \
>> +    object_dynamic_cast(OBJECT(chr), TYPE_TPM_SPAPR)
>>   
>>   /* returns NULL unless there is exactly one TPM device */
>>   static inline TPMIf *tpm_find(void)
>> diff --git a/qapi/tpm.json b/qapi/tpm.json
>> index 7093f26..dfa6a32 100644
>> --- a/qapi/tpm.json
>> +++ b/qapi/tpm.json
>> @@ -11,10 +11,11 @@
>>   # An enumeration of TPM models
>>   #
>>   # @tpm-tis: TPM TIS model
>> +# @tpm-spapr: TPM PAPR model (since 2.12)
>>   #
>>   # Since: 1.5
>>   ##
>> -{ 'enum': 'TpmModel', 'data': [ 'tpm-tis' ] }
>> +{ 'enum': 'TpmModel', 'data': [ 'tpm-tis', 'tpm-spapr' ] }
>>   
>>   ##
>>   # @query-tpm-models:
>> @@ -28,7 +29,7 @@
>>   # Example:
>>   #
>>   # -> { "execute": "query-tpm-models" }
>> -# <- { "return": [ "tpm-tis" ] }
>> +# <- { "return": [ "tpm-tis", "tpm-spapr" ] }
>>   #
>>   ##
>>   { 'command': 'query-tpm-models', 'returns': ['TpmModel'] }
>>

Re: [Qemu-devel] [PATCH 1/2] tpm_spapr: Support TPM for ppc64 using CRQ based interface

[Cédric Le Goater]

On 12/06/2017 12:53 PM, Stefan Berger wrote:
> On 12/06/2017 02:26 AM, Cédric Le Goater wrote:
>> Hello Stefan,
>>
>> Some comments below. How do we populate the device tree ?
> 
> Patched SLOF.


Ah. Isn't that a problem ? I thought QEMU was in charge of populating
the device tree.

>>
>> Thanks,
> 
> Thanks for the review. I will process the comments. I have some responses below.
> 
> One thing I wasn't sure about is this here:
> 
> //k->devnode = tpm_spapr_devnode;
> 
> 
> Is a function for this needed? If not, I will remove.


If you don't define one, it won't be used. I think this is old API 
to populate the DT which is not used anymore. To be checked I might
be wrong.

>>
>> On 12/05/2017 09:35 PM, Stefan Berger wrote:
>>> Implement support for TPM on ppc64 by implementing the vTPM CRQ
>>> interface as a frontend.
>>>
>>> The Linux vTPM driver for ppc64 works with this emulation.
>>>
>>> This emualtor also handles the TPM 2 case.
>>>
>>> Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com>
>>> ---
>>>   hw/tpm/Makefile.objs |   1 +
>>>   hw/tpm/tpm_spapr.c   | 380 +++++++++++++++++++++++++++++++++++++++++++++++++++
>>>   include/sysemu/tpm.h |   3 +
>>>   qapi/tpm.json        |   5 +-
>>>   4 files changed, 387 insertions(+), 2 deletions(-)
>>>   create mode 100644 hw/tpm/tpm_spapr.c
>>>
>>> diff --git a/hw/tpm/Makefile.objs b/hw/tpm/Makefile.objs
>>> index 41f0b7a..71ea63e 100644
>>> --- a/hw/tpm/Makefile.objs
>>> +++ b/hw/tpm/Makefile.objs
>>> @@ -1,3 +1,4 @@
>>>   common-obj-$(CONFIG_TPM_TIS) += tpm_tis.o
>>>   common-obj-$(CONFIG_TPM_PASSTHROUGH) += tpm_passthrough.o tpm_util.o
>>>   common-obj-$(CONFIG_TPM_EMULATOR) += tpm_emulator.o tpm_util.o
>>> +obj-$(CONFIG_PSERIES) += tpm_spapr.o
>>> diff --git a/hw/tpm/tpm_spapr.c b/hw/tpm/tpm_spapr.c
>>> new file mode 100644
>>> index 0000000..909aeeb
>>> --- /dev/null
>>> +++ b/hw/tpm/tpm_spapr.c
>>> @@ -0,0 +1,380 @@
>>> +/*
>>> + * QEMU PowerPC pSeries Logical Partition (aka sPAPR) hardware System Emulator
>>> + *
>>> + * PAPR Virtual TPM
>>> + *
>>> + * Copyright (c) 2015, 2017 IBM Corporation.
>>> + *
>>> + * Authors:
>>> + *    Stefan Berger <stefanb@linux.vnet.ibm.com>
>>> + *
>>> + *
>>> + * Permission is hereby granted, free of charge, to any person obtaining a copy
>>> + * of this software and associated documentation files (the "Software"), to deal
>>> + * in the Software without restriction, including without limitation the rights
>>> + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
>>> + * copies of the Software, and to permit persons to whom the Software is
>>> + * furnished to do so, subject to the following conditions:
>>> + *
>>> + * The above copyright notice and this permission notice shall be included in
>>> + * all copies or substantial portions of the Software.
>>> + *
>>> + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
>>> + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
>>> + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
>>> + * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
>>> + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
>>> + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
>>> + * THE SOFTWARE.
>> May be reduce a bit the header.
> 
> Which part? I derived the header from spapr_vscsi.c ...


This should be enough :

/*
 * ....
 *
 * Copyright (c) 2015-2017, IBM Corporation.
 *
 * This code is licensed under the GPL version 2 or later. See the
 * COPYING file in the top-level directory.
 */


> 
>>
>>> + */
>>> +
>>> +#include "qemu/osdep.h"
>>> +#include "qapi/error.h"
>>> +
>>> +#include "sysemu/tpm_backend.h"
>>> +#include "tpm_int.h"
>>> +#include "tpm_util.h"
>>> +
>>> +#include "hw/ppc/spapr.h"
>>> +#include "hw/ppc/spapr_vio.h"
>>> +
>>> +#define DEBUG_SPAPR_VTPM 0
>>> +
>>> +#define DPRINTF(fmt, ...) do { \
>>> +    if (DEBUG_SPAPR_VTPM) { \
>>> +        printf(fmt, ## __VA_ARGS__); \
>>> +    } \
>>> +} while (0)
>> traces are prefered over printfs
>>
>>> +#define VIO_SPAPR_VTPM_DEVICE(obj) \
>> I think you can trim the _DEVICE
> 
> Not sure what you mean.

I think VIO_SPAPR_VTPM is fine.

 
>> .
>>
>>> +     OBJECT_CHECK(SPAPRvTPMState, (obj), TYPE_TPM_SPAPR)
>>> +
>>> +typedef struct vio_crq {
>> type definitions should always use CamelCase.
> 
> Will fix. Derived from vscsi...
> 
>>
>>> +    uint8_t valid;  /* 0x80: cmd; 0xc0: init crq
>>> +                       0x81-0x83: CRQ message response */
>>> +    uint8_t msg;    /* see below */
>>> +    uint16_t len;   /* len of TPM request; len of TPM response */
>>> +    uint32_t data;  /* rtce_dma_handle when sending TPM request */
>>> +    uint64_t reserved;
>>> +} vio_crq;
>>> +
>>> +typedef union tpm_spapr_crq {
>> ditto.
>>
>>> +    vio_crq s;
>>> +    uint8_t raw[sizeof(vio_crq)];
>>> +} tpm_spapr_crq;
>>> +
>>> +#define SPAPR_VTPM_VALID_INIT_CRQ_COMMAND  0xC0
>>> +#define SPAPR_VTPM_VALID_COMMAND           0x80
>>> +#define SPAPR_VTPM_MSG_RESULT              0x80
>>> +
>>> +/* msg types for valid = SPAPR_VTPM_VALID_INIT_CRQ */
>>> +#define SPAPR_VTPM_INIT_CRQ_RESULT           0x1
>>> +#define SPAPR_VTPM_INIT_CRQ_COMPLETE_RESULT  0x2
>>> +
>>> +/* msg types for valid = SPAPR_VTPM_VALID_CMD */
>>> +#define SPAPR_VTPM_GET_VERSION               0x1
>>> +#define SPAPR_VTPM_TPM_COMMAND               0x2
>>> +#define SPAPR_VTPM_GET_RTCE_BUFFER_SIZE      0x3
>>> +#define SPAPR_VTPM_PREPARE_TO_SUSPEND        0x4
>>> +
>>> +#define MAX_BUFFER_SIZE TARGET_PAGE_SIZE
>>> +
>>> +typedef struct {
>>> +    VIOsPAPRDevice vdev;
>>> +
>>> +    tpm_spapr_crq crq; /* track single TPM command */
>>> +
>>> +    uint8_t state;
>>> +#define SPAPR_VTPM_STATE_NONE         0
>>> +#define SPAPR_VTPM_STATE_EXECUTION    1
>>> +#define SPAPR_VTPM_STATE_COMPLETION   2
>>> +
>>> +    unsigned char buffer[MAX_BUFFER_SIZE];
>>> +
>>> +    TPMBackendCmd cmd;
>>> +
>>> +    TPMBackend *be_driver;
>>> +    TPMVersion be_tpm_version;
>>> +
>>> +    size_t be_buffer_size;
>>> +} SPAPRvTPMState;
>>> +
>>> +static void tpm_spapr_show_buffer(const unsigned char *buffer,
>>> +                                  size_t buffer_len, const char *string)
>>> +{
>>> +#if DEBUG_SPAPR_VTPM
>>> +    size_t i, len;
>>> +
>>> +    len = MIN(tpm_cmd_get_size(buffer), buffer_len);
>>> +    printf("spapr_vtpm: %s length = %zu\n", string, len);
>>> +    for (i = 0; i < len; i++) {
>>> +        if (i && !(i % 16)) {
>>> +            printf("\n");
>>> +        }
>>> +        printf("%.2X ", buffer[i]);
>>> +    }
>>> +    printf("\n");
>>> +#endif
>>> +}
>>> +
>>> +/*
>>> + * Send a request to the TPM.
>>> + */
>>> +static void tpm_spapr_tpm_send(SPAPRvTPMState *s)
>>> +{
>>> +    tpm_spapr_show_buffer(s->buffer, sizeof(s->buffer), "spapr_vtpm: Tx TPM");
>>> +
>>> +    s->state = SPAPR_VTPM_STATE_EXECUTION;
>>> +    s->cmd = (TPMBackendCmd) {
>>> +        .locty = 0,
>>> +        .in = s->buffer,
>>> +        .in_len = MIN(tpm_cmd_get_size(s->buffer), sizeof(s->buffer)),
>>> +        .out = s->buffer,
>>> +        .out_len = sizeof(s->buffer),
>>> +    };
>>> +
>>> +    tpm_backend_deliver_request(s->be_driver, &s->cmd);
>>> +}
>>> +
>>> +static void tpm_spapr_got_payload(SPAPRvTPMState *s, tpm_spapr_crq *crq)
>>> +{
>>> +    long rc;
>>> +    DPRINTF("tpm_spapr_got_payload: crq->s.data = 0x%x  crq->s.len = %d\n",
>>> +            crq->s.data, crq->s.len);
>>> +
>>> +    /* a max. of be_buffer_size bytes can be transported */
>>> +    rc = spapr_vio_dma_read(&s->vdev, crq->s.data,
>>> +                            s->buffer, s->be_buffer_size);
>>> +    if (rc) {
>>> +        fprintf(stderr, "tpm_spapr_got_payload: DMA read failure !\n");
>> may be use error_report ? or error_setg()
>>
>>> +    }
>>> +
>>> +    /* let vTPM handle any malformed request */
>>> +    tpm_spapr_tpm_send(s);
>> why not return rc ? tpm_spapr_do_crq() is a VIO 'crq.SendFunc' handler
>> which returns hcall errors.
>>
>>> +}
>>> +
>>> +static int tpm_spapr_do_crq(struct VIOsPAPRDevice *dev, uint8_t *crq_data)
>>> +{
>>> +    SPAPRvTPMState *s = VIO_SPAPR_VTPM_DEVICE(dev);
>>> +    tpm_spapr_crq local_crq;
>>> +    tpm_spapr_crq *crq = &s->crq; /* requests only */
>>> +
>>> +    memcpy(&local_crq.raw, crq_data, sizeof(local_crq.raw));
>>> +
>>> +    DPRINTF("VTPM: do_crq %02x %02x ...\n",
>>> +            local_crq.raw[0], local_crq.raw[1]);
>>> +
>>> +    switch (local_crq.s.valid) {
>>> +    case SPAPR_VTPM_VALID_INIT_CRQ_COMMAND: /* Init command/response */
>>> +
>>> +        /* Respond to initialization request */
>>> +        switch (local_crq.s.msg) {
>>> +        case SPAPR_VTPM_INIT_CRQ_RESULT:
>>> +            DPRINTF("vtpm_do_crq: SPAPR_VTPM_INIT_CRQ_RESULT\n");
>>> +            memset(local_crq.raw, 0, sizeof(local_crq.raw));
>>> +            local_crq.s.valid = SPAPR_VTPM_VALID_INIT_CRQ_COMMAND;
>>> +            local_crq.s.msg = SPAPR_VTPM_INIT_CRQ_RESULT;
>>> +            spapr_vio_send_crq(dev, local_crq.raw);
>>> +            break;
>>> +
>>> +        case SPAPR_VTPM_INIT_CRQ_COMPLETE_RESULT:
>>> +            DPRINTF("vtpm_do_crq: SPAPR_VTPM_INIT_CRQ_COMP_RESULT\n");
>>> +            memset(local_crq.raw, 0, sizeof(local_crq.raw));
>>> +            local_crq.s.valid = SPAPR_VTPM_VALID_INIT_CRQ_COMMAND;
>>> +            local_crq.s.msg = SPAPR_VTPM_INIT_CRQ_COMPLETE_RESULT;
>>> +            spapr_vio_send_crq(dev, local_crq.raw);
>>> +            break;
>>> +        }
>>> +
>>> +        break;
>>> +    case SPAPR_VTPM_VALID_COMMAND: /* Payloads */
>>> +        switch (local_crq.s.msg) {
>>> +        case SPAPR_VTPM_TPM_COMMAND:
>>> +            DPRINTF("vtpm_do_crq: got TPM command payload!\n");
>>> +            if (s->state == SPAPR_VTPM_STATE_EXECUTION)
>>> +                return H_BUSY;
>>> +            /* this crq is tracked */
>>> +            memcpy(crq->raw, crq_data, sizeof(crq->raw));
>>> +            crq->s.valid = be16_to_cpu(0);
>>> +            crq->s.len = be16_to_cpu(crq->s.len);
>>> +            crq->s.data = be32_to_cpu(crq->s.data);
>>> +            tpm_spapr_got_payload(s, crq);
>>> +            break;
>>> +
>>> +        case SPAPR_VTPM_GET_RTCE_BUFFER_SIZE:
>>> +            DPRINTF("vtpm_do_crq: resp: buffer size is %zu\n",
>>> +                    s->be_buffer_size);
>>> +            local_crq.s.msg |= SPAPR_VTPM_MSG_RESULT;
>>> +            local_crq.s.len = cpu_to_be16(s->be_buffer_size);
>>> +            spapr_vio_send_crq(dev, local_crq.raw);
>>> +            break;
>>> +
>>> +        case SPAPR_VTPM_GET_VERSION:
>>> +            local_crq.s.msg |= SPAPR_VTPM_MSG_RESULT;
>>> +            local_crq.s.len = cpu_to_be16(0);
>>> +            switch (s->be_tpm_version) {
>>> +            case TPM_VERSION_UNSPEC:
>>> +                local_crq.s.data = cpu_to_be32(0);
>>> +                break;
>>> +            case TPM_VERSION_1_2:
>>> +                local_crq.s.data = cpu_to_be32(1);
>>> +                break;
>>> +            case TPM_VERSION_2_0:
>>> +                local_crq.s.data = cpu_to_be32(2);
>>> +                break;
>>> +            }
>>> +            DPRINTF("vtpm_do_crq: resp: version %u\n",
>>> +                    local_crq.s.data);
>>> +            spapr_vio_send_crq(dev, local_crq.raw);
>>> +            break;
>>> +
>>> +        case SPAPR_VTPM_PREPARE_TO_SUSPEND:
>>> +            DPRINTF("vtpm_do_crq: resp: prep to suspend\n");
>>> +            local_crq.s.msg |= SPAPR_VTPM_MSG_RESULT;
>>> +            spapr_vio_send_crq(dev, local_crq.raw);
>>> +            break;
>>> +
>>> +        default:
>>> +            DPRINTF("vtpm_do_crq: Unknown message type %02x\n",
>>> +                    crq->s.msg);
>>> +        }
>>> +        break;
>>> +    default:
>>> +        DPRINTF("vtpm_do_crq: unknown CRQ %02x %02x ...\n",
>>> +                local_crq.raw[0], local_crq.raw[1]);
>>> +    };
>>> +
>>> +    return 0;
>> shouldn't it be H_SUCCESS.
> 
> True. Will fix.
> 
>>
>>> +}
>>> +
>>> +static void tpm_spapr_request_completed(TPMIf *ti)
>>> +{
>>> +    SPAPRvTPMState *s = VIO_SPAPR_VTPM_DEVICE(ti);
>>> +    tpm_spapr_crq *crq = &s->crq;
>>> +    uint32_t len;
>>> +    int rc;
>>> +
>>> +    tpm_spapr_show_buffer(s->buffer, sizeof(s->buffer), "spapr_vtpm: Rx TPM");
>>> +
>>> +    s->state = SPAPR_VTPM_STATE_COMPLETION;
>>> +
>>> +    /* a max. of be_buffer_size bytes can be transported */
>>> +    len = MIN(tpm_cmd_get_size(s->buffer), s->be_buffer_size);
>>> +    rc = spapr_vio_dma_write(&s->vdev, crq->s.data, s->buffer, len);
>>> +
>>> +    crq->s.valid = SPAPR_VTPM_MSG_RESULT;
>>> +    crq->s.msg = SPAPR_VTPM_TPM_COMMAND | SPAPR_VTPM_MSG_RESULT;
>>> +    crq->s.len = cpu_to_be16(len);
>>> +    crq->s.data = cpu_to_be32(crq->s.data);
>>> +
>>> +    if (rc == 0) {
>>> +        rc = spapr_vio_send_crq(&s->vdev, crq->raw);
>>> +        if (rc) {
>>> +            DPRINTF("%s: Error sending response\n", __func__);
>>> +        }
>>> +    } else {
>>> +        DPRINTF("%s: Error with DMA write\n", __func__);
>>> +    }
>> These DPRINTF look like errors to me.
> 
> Will convert to error_report()
> 
>>
>>> +}
>>> +
>>> +static int tpm_spapr_do_startup_tpm(SPAPRvTPMState *s, size_t buffersize)
>>> +{
>>> +    return tpm_backend_startup_tpm(s->be_driver, buffersize);
>>> +}
>>> +
>>> +static void tpm_spapr_reset(VIOsPAPRDevice *dev)
>>> +{
>>> +    SPAPRvTPMState *s = VIO_SPAPR_VTPM_DEVICE(dev);
>>> +
>>> +    s->state = SPAPR_VTPM_STATE_NONE;
>>> +
>>> +    s->be_tpm_version = tpm_backend_get_tpm_version(s->be_driver);
>>> +
>>> +    s->be_buffer_size = MAX(ROUND_UP(tpm_backend_get_buffer_size(s->be_driver),
>>> +                                     TARGET_PAGE_SIZE),
>>> +                            sizeof(s->buffer));
>>> +
>>> +    tpm_backend_reset(s->be_driver);
>>> +    tpm_spapr_do_startup_tpm(s, s->be_buffer_size);
>>> +}
>>> +
>>> +static enum TPMVersion tpm_spapr_get_version(TPMIf *ti)
>>> +{
>>> +    SPAPRvTPMState *s = VIO_SPAPR_VTPM_DEVICE(ti);
>>> +
>>> +    if (tpm_backend_had_startup_error(s->be_driver)) {
>>> +        return TPM_VERSION_UNSPEC;
>>> +    }
>>> +
>>> +    return tpm_backend_get_tpm_version(s->be_driver);
>>> +}
>>> +
>>> +static const VMStateDescription vmstate_spapr_vtpm = {
>>> +    .name = "tpm_spapr",
>>> +    .unmigratable = 1,
>>> +};
>>> +
>>> +static Property tpm_spapr_properties[] = {
>>> +    DEFINE_SPAPR_PROPERTIES(SPAPRvTPMState, vdev),
>>> +    DEFINE_PROP_TPMBE("tpmdev", SPAPRvTPMState, be_driver),
>>> +    DEFINE_PROP_END_OF_LIST(),
>>> +};
>>> +
>>> +static void tpm_spapr_realizefn(VIOsPAPRDevice *dev, Error **errp)
>>> +{
>>> +    SPAPRvTPMState *s = VIO_SPAPR_VTPM_DEVICE(dev);
>>> +
>>> +    if (!tpm_find()) {
>>> +        error_setg(errp, "at most one TPM device is permitted");
>>> +        return;
>>> +    }
>>>
>> tpm_find() does not exist anymore. It was replaced by tpm_get_version()
>> AFAICT in commit 5cb18b3d7bff.
> 
> tpm_find() will be introduced here : https://github.com/stefanberger/qemu-tpm/commit/9d49eb48c8dc46fede713d5d1b3525b43686a692
> 

You should send the full patchset rebased on QEMU's head or 
on David's 2.12 branch else this patch won't apply or compile.

>>
>>> +    dev->crq.SendFunc = tpm_spapr_do_crq;
>>> +
>>> +    if (!s->be_driver) {
>>> +        error_setg(errp, "'tpmdev' property is required");
>>> +        return;
>>> +    }
>>> +
>>> +}
>>> +
>>> +static void tpm_spapr_class_init(ObjectClass *klass, void *data)
>>> +{
>>> +    DeviceClass *dc = DEVICE_CLASS(klass);
>>> +    VIOsPAPRDeviceClass *k = VIO_SPAPR_DEVICE_CLASS(klass);
>>> +    TPMIfClass *tc = TPM_IF_CLASS(klass);
>>> +
>>> +    k->realize = tpm_spapr_realizefn;
>>> +    k->reset = tpm_spapr_reset;
>>> +    //k->devnode = tpm_spapr_devnode;
> 
> I would remove this unless this is needed. Wasn't sure.
>
> 
>>> +    k->dt_name = "vtpm";
>>> +    k->dt_type = "IBM,vtpm";
>>> +    k->dt_compatible = "IBM,vtpm";
>>> +    k->signal_mask = 0x00000001;
>>> +    set_bit(DEVICE_CATEGORY_MISC, dc->categories);
>>> +    dc->props = tpm_spapr_properties;
>>> +    k->rtce_window_size = 0x10000000;
>>> +    dc->vmsd = &vmstate_spapr_vtpm;
>>> +
>>> +    tc->model = TPM_MODEL_TPM_SPAPR;
>>> +    tc->get_version = tpm_spapr_get_version;
>>> +    tc->request_completed = tpm_spapr_request_completed;
>>> +}
>>> +
>>> +static const TypeInfo tpm_spapr_info = {
>>> +    .name          = TYPE_TPM_SPAPR,
>>> +    .parent        = TYPE_VIO_SPAPR_DEVICE,
>>> +    .instance_size = sizeof(SPAPRvTPMState),
>>> +    .class_init    = tpm_spapr_class_init,
>>> +    .interfaces = (InterfaceInfo[]) {
>>> +        { TYPE_TPM_IF },
>>> +        { }
>>> +    }
>>> +};
>>> +
>>> +static void tpm_spapr_register_types(void)
>>> +{
>>> +    type_register_static(&tpm_spapr_info);
>>> +}
>>> +
>>> +type_init(tpm_spapr_register_types)
>>> diff --git a/include/sysemu/tpm.h b/include/sysemu/tpm.h
>>> index 852e026..afefadd 100644
>>> --- a/include/sysemu/tpm.h
>>> +++ b/include/sysemu/tpm.h
>>> @@ -46,9 +46,12 @@ typedef struct TPMIfClass {
>>>   } TPMIfClass;
>>>     #define TYPE_TPM_TIS                "tpm-tis"
>>> +#define TYPE_TPM_SPAPR              "tpm-spapr"
>>>     #define TPM_IS_TIS(chr)                             \
>>>       object_dynamic_cast(OBJECT(chr), TYPE_TPM_TIS)
>>> +#define TPM_IS_SPAPR(chr)                           \
>>> +    object_dynamic_cast(OBJECT(chr), TYPE_TPM_SPAPR)
>>>     /* returns NULL unless there is exactly one TPM device */
>>>   static inline TPMIf *tpm_find(void)
>>> diff --git a/qapi/tpm.json b/qapi/tpm.json
>>> index 7093f26..dfa6a32 100644
>>> --- a/qapi/tpm.json
>>> +++ b/qapi/tpm.json
>>> @@ -11,10 +11,11 @@
>>>   # An enumeration of TPM models
>>>   #
>>>   # @tpm-tis: TPM TIS model
>>> +# @tpm-spapr: TPM PAPR model (since 2.12)
>>>   #
>>>   # Since: 1.5
>>>   ##
>>> -{ 'enum': 'TpmModel', 'data': [ 'tpm-tis' ] }
>>> +{ 'enum': 'TpmModel', 'data': [ 'tpm-tis', 'tpm-spapr' ] }
>>>     ##
>>>   # @query-tpm-models:
>>> @@ -28,7 +29,7 @@
>>>   # Example:
>>>   #
>>>   # -> { "execute": "query-tpm-models" }
>>> -# <- { "return": [ "tpm-tis" ] }
>>> +# <- { "return": [ "tpm-tis", "tpm-spapr" ] }
>>>   #
>>>   ##
>>>   { 'command': 'query-tpm-models', 'returns': ['TpmModel'] }
>>>
> 

Re: [Qemu-devel] [PATCH 1/2] tpm_spapr: Support TPM for ppc64 using CRQ based interface

[Stefan Berger]

On 12/08/2017 01:17 PM, Cédric Le Goater wrote:
> On 12/06/2017 12:53 PM, Stefan Berger wrote:
>> On 12/06/2017 02:26 AM, Cédric Le Goater wrote:
>>> Hello Stefan,
>>>
>>> Some comments below. How do we populate the device tree ?
>> Patched SLOF.
>
> Ah. Isn't that a problem ? I thought QEMU was in charge of populating
> the device tree.


I haven't seen this for ppc64 but it's true for ACPI on x86.

> You should send the full patchset rebased on QEMU's head or
> on David's 2.12 branch else this patch won't apply or compile.


I am maintaining a tpm-next branch for 2.12 that includes the patches 
that this builds on top of.

    Stefan

[Qemu-devel] [PATCH 2/2] tpm_spapr: Support suspend and resume

[Stefan Berger]

Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com>
---
 hw/tpm/tpm_spapr.c | 61 ++++++++++++++++++++++++++++++++++++++++++++++++++----
 1 file changed, 57 insertions(+), 4 deletions(-)

diff --git a/hw/tpm/tpm_spapr.c b/hw/tpm/tpm_spapr.c
index 909aeeb..e145697 100644
--- a/hw/tpm/tpm_spapr.c
+++ b/hw/tpm/tpm_spapr.c
@@ -248,9 +248,8 @@ static int tpm_spapr_do_crq(struct VIOsPAPRDevice *dev, uint8_t *crq_data)
     return 0;
 }
 
-static void tpm_spapr_request_completed(TPMIf *ti)
+static void _tpm_spapr_request_completed(SPAPRvTPMState *s)
 {
-    SPAPRvTPMState *s = VIO_SPAPR_VTPM_DEVICE(ti);
     tpm_spapr_crq *crq = &s->crq;
     uint32_t len;
     int rc;
@@ -278,6 +277,13 @@ static void tpm_spapr_request_completed(TPMIf *ti)
     }
 }
 
+static void tpm_spapr_request_completed(TPMIf *ti)
+{
+    SPAPRvTPMState *s = VIO_SPAPR_VTPM_DEVICE(ti);
+
+    _tpm_spapr_request_completed(s);
+}
+
 static int tpm_spapr_do_startup_tpm(SPAPRvTPMState *s, size_t buffersize)
 {
     return tpm_backend_startup_tpm(s->be_driver, buffersize);
@@ -310,9 +316,56 @@ static enum TPMVersion tpm_spapr_get_version(TPMIf *ti)
     return tpm_backend_get_tpm_version(s->be_driver);
 }
 
+/* persistent state handling */
+
+static int tpm_spapr_pre_save(void *opaque)
+{
+    SPAPRvTPMState *s = opaque;
+
+    /*
+     * Synchronize with backend completion.
+     */
+    tpm_backend_wait_cmd_completed(s->be_driver);
+
+    /*
+     * we cannot deliver the results to the VM (in state
+     * SPAPR_VTPM_STATE_EXECUTION) since DMA would touch VM memory
+     */
+
+    return 0;
+}
+
+static int tpm_spapr_post_load(void *opaque,
+                               int version_id __attribute__((unused)))
+{
+    SPAPRvTPMState *s = opaque;
+
+    if (s->state == SPAPR_VTPM_STATE_EXECUTION) {
+        /*
+         * now we can deliver the results to the VM via DMA
+         */
+        _tpm_spapr_request_completed(s);
+    }
+
+    return 0;
+}
+
 static const VMStateDescription vmstate_spapr_vtpm = {
-    .name = "tpm_spapr",
-    .unmigratable = 1,
+    .name = "tpm-spapr",
+    .version_id = 1,
+    .minimum_version_id = 0,
+    .minimum_version_id_old = 0,
+    .pre_save = tpm_spapr_pre_save,
+    .post_load = tpm_spapr_post_load,
+    .fields = (VMStateField[]) {
+        VMSTATE_BUFFER(crq.raw, SPAPRvTPMState),
+        VMSTATE_UINT64(vdev.crq.qladdr, SPAPRvTPMState),
+        VMSTATE_UINT32(vdev.crq.qsize, SPAPRvTPMState),
+        VMSTATE_UINT32(vdev.crq.qnext, SPAPRvTPMState),
+        VMSTATE_UINT8(state, SPAPRvTPMState),
+        VMSTATE_BUFFER(buffer, SPAPRvTPMState),
+        VMSTATE_END_OF_LIST(),
+    }
 };
 
 static Property tpm_spapr_properties[] = {
-- 
2.5.5

Re: [Qemu-devel] [PATCH 0/2] Add vTPM emulator supportfor ppc64 platform

[Stefan Berger]

On 12/05/2017 03:35 PM, Stefan Berger wrote:
> The following series of patches adds vTPM emulator support for the
> ppc64 platform (pSeries).
>
> It can be tested as follows with swtpm/libtpms:
>
> #> swtpm socket --tpmstate dir=/tmp/mytpm1 \
> 	--ctrl type=unixio,path=/tmp/mytpm1/ctrl.sock \
> 	--log level=2
>
> If TPM 2 is desired, add --tpm2 as parameter to the above
> and use the latest tpm2-preview branches of libtpms and swtpm.
>
> In another terminal start QEMU:
>
> #> sudo ./ppc64-softmmu/qemu-system-ppc64 -m 1024 \
> 	-monitor stdio -vnc :12 -vga std \
> 	--chardev socket,id=chrtpm,path=/tmp/mytpm1/ctrl.sock \
> 	-tpmdev emulator,id=tpm0,chardev=chrtpm \
> 	-device tpm-spapr,tpmdev=tpm0 \
> 	-L /tmp -bios boot_rom.bin \
> 	myimage.raw
>
> Links:
>   - libtpms: https://github.com/stefanberger/libtpms/wiki
>   - swtpm: https://github.com/stefanberger/swtpm/wiki

The migration patch builds on a series of previous patches. These and 
this series of patches can be found in my working branch:

https://github.com/stefanberger/qemu-tpm/commits/tpm-next+


>
> Regards,
>      Stefan
>
>
> Stefan Berger (2):
>    tpm_spapr: Support TPM for ppc64 using CRQ based interface
>    tpm_spapr: Support suspend and resume
>
>   hw/tpm/Makefile.objs |   1 +
>   hw/tpm/tpm_spapr.c   | 433 +++++++++++++++++++++++++++++++++++++++++++++++++++
>   include/sysemu/tpm.h |   3 +
>   qapi/tpm.json        |   5 +-
>   4 files changed, 440 insertions(+), 2 deletions(-)
>   create mode 100644 hw/tpm/tpm_spapr.c
>