From: Paolo Bonzini <pbonzini@redhat.com>
To: qemu-devel@nongnu.org
Cc: qemu-stable@nongnu.org
Subject: [Qemu-devel] [PULL 03/46] qemu-pr-helper: miscellaneous fixes
Date: Wed, 20 Dec 2017 18:14:15 +0100 [thread overview]
Message-ID: <1513790098-9815-4-git-send-email-pbonzini@redhat.com> (raw)
In-Reply-To: <1513790098-9815-1-git-send-email-pbonzini@redhat.com>
1) Return a generic sense if TEST UNIT READY does not provide one;
2) Fix two mistakes in copying from the spec.
Cc: qemu-stable@nongnu.org
Reported-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
---
include/scsi/utils.h | 6 +++++-
scsi/qemu-pr-helper.c | 30 ++++++++++++++++++++++++++----
scsi/utils.c | 10 ++++++++++
3 files changed, 41 insertions(+), 5 deletions(-)
diff --git a/include/scsi/utils.h b/include/scsi/utils.h
index 00a4bdb..eb07e47 100644
--- a/include/scsi/utils.h
+++ b/include/scsi/utils.h
@@ -76,7 +76,11 @@ extern const struct SCSISense sense_code_LUN_FAILURE;
extern const struct SCSISense sense_code_LUN_COMM_FAILURE;
/* Command aborted, Overlapped Commands Attempted */
extern const struct SCSISense sense_code_OVERLAPPED_COMMANDS;
-/* LUN not ready, Capacity data has changed */
+/* Medium error, Unrecovered read error */
+extern const struct SCSISense sense_code_READ_ERROR;
+/* LUN not ready, Cause not reportable */
+extern const struct SCSISense sense_code_NOT_READY;
+/* Unit attention, Capacity data has changed */
extern const struct SCSISense sense_code_CAPACITY_CHANGED;
/* Unit attention, SCSI bus reset */
extern const struct SCSISense sense_code_SCSI_BUS_RESET;
diff --git a/scsi/qemu-pr-helper.c b/scsi/qemu-pr-helper.c
index dd97851..9fe615c 100644
--- a/scsi/qemu-pr-helper.c
+++ b/scsi/qemu-pr-helper.c
@@ -314,6 +314,22 @@ static int is_mpath(int fd)
return !strncmp(tgt->target_type, "multipath", DM_MAX_TYPE_NAME);
}
+static SCSISense mpath_generic_sense(int r)
+{
+ switch (r) {
+ case MPATH_PR_SENSE_NOT_READY:
+ return SENSE_CODE(NOT_READY);
+ case MPATH_PR_SENSE_MEDIUM_ERROR:
+ return SENSE_CODE(READ_ERROR);
+ case MPATH_PR_SENSE_HARDWARE_ERROR:
+ return SENSE_CODE(TARGET_FAILURE);
+ case MPATH_PR_SENSE_ABORTED_COMMAND:
+ return SENSE_CODE(IO_ERROR);
+ default:
+ abort();
+ }
+}
+
static int mpath_reconstruct_sense(int fd, int r, uint8_t *sense)
{
switch (r) {
@@ -329,7 +345,13 @@ static int mpath_reconstruct_sense(int fd, int r, uint8_t *sense)
*/
uint8_t cdb[6] = { TEST_UNIT_READY };
int sz = 0;
- return do_sgio(fd, cdb, sense, NULL, &sz, SG_DXFER_NONE);
+ int r = do_sgio(fd, cdb, sense, NULL, &sz, SG_DXFER_NONE);
+
+ if (r != GOOD) {
+ return r;
+ }
+ scsi_build_sense(sense, mpath_generic_sense(r));
+ return CHECK_CONDITION;
}
case MPATH_PR_SENSE_UNIT_ATTENTION:
@@ -449,7 +471,7 @@ static int multipath_pr_out(int fd, const uint8_t *cdb, uint8_t *sense,
memset(¶mp, 0, sizeof(paramp));
memcpy(¶mp.key, ¶m[0], 8);
memcpy(¶mp.sa_key, ¶m[8], 8);
- paramp.sa_flags = param[10];
+ paramp.sa_flags = param[20];
if (sz > PR_OUT_FIXED_PARAM_SIZE) {
size_t transportid_len;
int i, j;
@@ -478,8 +500,8 @@ static int multipath_pr_out(int fd, const uint8_t *cdb, uint8_t *sense,
j += offsetof(struct transportid, n_port_name[8]);
i += 24;
break;
- case 3:
- case 0x43:
+ case 5:
+ case 0x45:
/* iSCSI transport. */
len = lduw_be_p(¶m[i + 2]);
if (len > 252 || (len & 3) || i + len + 4 > transportid_len) {
diff --git a/scsi/utils.c b/scsi/utils.c
index 5684951..e4182a9 100644
--- a/scsi/utils.c
+++ b/scsi/utils.c
@@ -211,6 +211,16 @@ const struct SCSISense sense_code_LUN_COMM_FAILURE = {
.key = ABORTED_COMMAND, .asc = 0x08, .ascq = 0x00
};
+/* Medium Error, Unrecovered read error */
+const struct SCSISense sense_code_READ_ERROR = {
+ .key = MEDIUM_ERROR, .asc = 0x11, .ascq = 0x00
+};
+
+/* Not ready, Cause not reportable */
+const struct SCSISense sense_code_NOT_READY = {
+ .key = NOT_READY, .asc = 0x04, .ascq = 0x00
+};
+
/* Unit attention, Capacity data has changed */
const struct SCSISense sense_code_CAPACITY_CHANGED = {
.key = UNIT_ATTENTION, .asc = 0x2a, .ascq = 0x09
--
1.8.3.1
next prev parent reply other threads:[~2017-12-20 17:15 UTC|newest]
Thread overview: 63+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-12-20 17:14 [Qemu-devel] [PULL 00/46] First batch of misc patches for QEMU 2.12 Paolo Bonzini
2017-12-20 17:14 ` [Qemu-devel] [PULL 01/46] memfd: fix configure test Paolo Bonzini
2018-04-30 15:49 ` Greg Kurz
2017-12-20 17:14 ` [Qemu-devel] [PULL 02/46] qemu-thread: fix races on threads that exit very quickly Paolo Bonzini
2017-12-20 17:14 ` Paolo Bonzini [this message]
2017-12-20 17:14 ` [Qemu-devel] [PULL 04/46] contrib: add systemd unit files Paolo Bonzini
2018-01-10 14:44 ` Daniel P. Berrange
2017-12-20 17:14 ` [Qemu-devel] [PULL 05/46] Revert "docker: Enable features explicitly in test-full" Paolo Bonzini
2017-12-20 17:14 ` [Qemu-devel] [PULL 06/46] scsi-block: Add share-rw option Paolo Bonzini
2017-12-20 17:14 ` [Qemu-devel] [PULL 07/46] MAITAINERS: List Fam Zheng as reviewer for SCSI patches Paolo Bonzini
2017-12-20 17:14 ` [Qemu-devel] [PULL 08/46] x86/cpu: Enable new SSE/AVX/AVX512 cpu features Paolo Bonzini
2017-12-20 17:14 ` [Qemu-devel] [PULL 09/46] hyperv: set partition-wide MSRs only on first vcpu Paolo Bonzini
2017-12-20 17:14 ` [Qemu-devel] [PULL 10/46] hyperv: ensure SINTx msrs are reset properly Paolo Bonzini
2017-12-20 17:14 ` [Qemu-devel] [PULL 11/46] hyperv: make SynIC version msr constant Paolo Bonzini
2017-12-20 17:14 ` [Qemu-devel] [PULL 12/46] cpus: make pause_all_cpus() play with SMP on single threaded TCG Paolo Bonzini
2017-12-20 17:14 ` [Qemu-devel] [PULL 13/46] cpu-exec: fix missed CPU kick during interrupt injection Paolo Bonzini
2017-12-20 17:14 ` [Qemu-devel] [PULL 14/46] target/i386: Fix compiler warnings Paolo Bonzini
2017-12-20 17:14 ` [Qemu-devel] [PULL 15/46] baum: Truncate braille device size to 84x1 Paolo Bonzini
2017-12-20 17:14 ` [Qemu-devel] [PULL 16/46] sockets: remove obsolete code that updated listen address Paolo Bonzini
2017-12-20 17:14 ` [Qemu-devel] [PULL 17/46] target/i386: Fix handling of VEX prefixes Paolo Bonzini
2017-12-20 17:14 ` [Qemu-devel] [PULL 18/46] tests/boot-serial-test: Make sure that we check the timeout regularly Paolo Bonzini
2017-12-20 17:14 ` [Qemu-devel] [PULL 19/46] tests/boot-serial-test: Add code to allow to specify our own kernel or bios Paolo Bonzini
2017-12-20 17:14 ` [Qemu-devel] [PULL 20/46] tests/boot-serial-test: Add support for the mcf5208evb board Paolo Bonzini
2017-12-20 17:14 ` [Qemu-devel] [PULL 21/46] tests/boot-serial-test: Add tests for microblaze boards Paolo Bonzini
2017-12-20 17:14 ` [Qemu-devel] [PULL 22/46] hw/moxie/moxiesim: Add support for loading a BIOS on moxiesim Paolo Bonzini
2017-12-20 17:14 ` [Qemu-devel] [PULL 23/46] tests/boot-serial-test: Add a test for the moxiesim machine Paolo Bonzini
2017-12-20 17:14 ` [Qemu-devel] [PULL 24/46] tests/boot-serial-test: Add support for the raspi2 machine Paolo Bonzini
2017-12-20 17:14 ` [Qemu-devel] [PULL 25/46] cpu: refactor cpu_address_space_init() Paolo Bonzini
2017-12-20 17:14 ` [Qemu-devel] [PULL 26/46] cpu: suffix cpu address spaces with cpu index Paolo Bonzini
2017-12-20 17:14 ` [Qemu-devel] [PULL 27/46] block/iscsi: dont leave allocmap in an invalid state on UNMAP failure Paolo Bonzini
2017-12-20 17:14 ` [Qemu-devel] [PULL 28/46] block/iscsi: only report an iSCSI Failure if we don't handle it gracefully Paolo Bonzini
2017-12-20 17:14 ` [Qemu-devel] [PULL 29/46] exec: Don't reuse unassigned_mem_ops for io_mem_rom Paolo Bonzini
2017-12-20 17:14 ` [Qemu-devel] [PULL 30/46] hw/mips/boston: Remove workaround for writes to ROM aborting Paolo Bonzini
2017-12-20 17:14 ` [Qemu-devel] [PULL 31/46] hw/i386/vmport: replace fprintf() by trace events or LOG_UNIMP Paolo Bonzini
2017-12-20 17:14 ` [Qemu-devel] [PULL 32/46] scsi: provide general-purpose functions to manage sense data Paolo Bonzini
2017-12-22 15:25 ` Roman Kagan
2017-12-20 17:14 ` [Qemu-devel] [PULL 33/46] scsi: replace hex constants with #defines Paolo Bonzini
2017-12-20 17:14 ` [Qemu-devel] [PULL 34/46] Remove legacy -no-kvm-pit option Paolo Bonzini
2017-12-20 17:14 ` [Qemu-devel] [PULL 35/46] i8259: convert DPRINTFs into trace Paolo Bonzini
2017-12-20 17:14 ` [Qemu-devel] [PULL 36/46] i8259: use DEBUG_IRQ_COUNT always Paolo Bonzini
2017-12-20 17:14 ` [Qemu-devel] [PULL 37/46] i8259: generalize statistics into common code Paolo Bonzini
2017-12-20 17:14 ` [Qemu-devel] [PULL 38/46] kvm-i8259: support "info pic" and "info irq" Paolo Bonzini
2017-12-20 17:14 ` [Qemu-devel] [PULL 39/46] i8259: move TYPE_INTERRUPT_STATS_PROVIDER upper Paolo Bonzini
2017-12-20 17:14 ` [Qemu-devel] [PULL 40/46] checkpatch: volatile with a comment or sig_atomic_t is okay Paolo Bonzini
2017-12-20 17:14 ` [Qemu-devel] [PULL 41/46] rcu: reduce more than 7MB heap memory by malloc_trim() Paolo Bonzini
2017-12-20 17:14 ` [Qemu-devel] [PULL 42/46] chardev: fix backend events regression with mux chardev Paolo Bonzini
2017-12-20 17:14 ` [Qemu-devel] [PULL 43/46] test: add some chardev mux event tests Paolo Bonzini
2017-12-20 17:14 ` [Qemu-devel] [PULL 44/46] blockdev: convert internal NBD server to QIONetListener Paolo Bonzini
2017-12-20 17:14 ` [Qemu-devel] [PULL 45/46] blockdev: convert qemu-nbd " Paolo Bonzini
2017-12-20 17:14 ` [Qemu-devel] [PULL 46/46] chardev: convert the socket " Paolo Bonzini
2017-12-20 18:21 ` [Qemu-devel] [PULL 00/46] First batch of misc patches for QEMU 2.12 no-reply
2017-12-20 19:20 ` Peter Maydell
2017-12-20 21:56 ` Paolo Bonzini
2017-12-21 12:49 ` [Qemu-devel] out of bounds in set_cc_op() (was: [PULL 00/46] First batch of misc patches for QEMU 2.12) Thomas Huth
2017-12-21 13:07 ` [Qemu-devel] out of bounds in set_cc_op() Laurent Vivier
2017-12-21 13:32 ` Laurent Vivier
2017-12-21 14:10 ` Paolo Bonzini
2017-12-21 14:13 ` Laurent Vivier
2017-12-21 14:14 ` Paolo Bonzini
2017-12-21 14:36 ` Laurent Vivier
2017-12-21 19:20 ` Laurent Vivier
2017-12-21 19:30 ` Paolo Bonzini
2018-01-02 16:57 ` Thomas Huth
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1513790098-9815-4-git-send-email-pbonzini@redhat.com \
--to=pbonzini@redhat.com \
--cc=qemu-devel@nongnu.org \
--cc=qemu-stable@nongnu.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).